Skip to Content

1,164 Results Found

  • Article
  • Open Access
23 Citations
7,446 Views
20 Pages

11 March 2024

Martensitic stainless steels (MSSs) have been widely used in the manufacture of turbine blades, surgical instruments, and cutting tools because of their hardness and corrosion resistance. The MSSs are usually tempered at a temperature no higher than...

  • Communication
  • Open Access
445 Views
11 Pages

30 July 2026

Construction delays frequently reduce the workability of cement mortar, and re-tempering by adding extra water is commonly practiced to restore its fluidity. Although re-tempering improves fresh-state workability, it may simultaneously impair the har...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
8 Citations
3,061 Views
15 Pages

21 August 2023

The evolution of the microstructure, the precipitation behavior, and the mechanical performances of Nb-V-Ti micro-alloyed steel prepared under different tempering time were studied using transmission electron microscopy (TEM), X-ray diffraction (XRD)...

(This article belongs to the Topic Microstructure and Properties in Metals and Alloys, 2nd Volume)
  • Article
  • Open Access
16 Citations
4,831 Views
17 Pages

Effect of Cu Alloying on Mechanical Properties of Medium-C Steel after Long-Time Tempering at 500 °C

  • Pavel Salvetr,
  • Aleksandr Gokhman,
  • Milan Svoboda,
  • Črtomir Donik and ,
  • Ivana Podstranská,
  • Jakub Kotous and
  • Zbyšek Nový
  • + 2 authors+ 0 author

16 March 2023

This research studies the influence of the copper alloying of medium-carbon steel on mechanical properties after quenching and tempering at 500 °C. The microstructure was characterised using SEM, EBSD, TEM, and XRD analysis. The mechanical proper...

(This article belongs to the Special Issue Microstructure and Mechanical Properties Relationship for Metallic Materials)
  • Article
  • Open Access
25 Citations
4,446 Views
10 Pages

23 November 2022

Among various processes for manufacturing complex-shaped metal parts, additive manufacturing is highlighted as a process capable of reducing the wastage of materials without requiring a post-process, such as machining and finishing. In particular, it...

(This article belongs to the Special Issue Advances in Materials Processing (Second Volume))
  • Article
  • Open Access
2 Citations
2,250 Views
12 Pages

21 September 2024

AISI 431 martensitic stainless steels (MSS) with 2.5 wt% Cu were fabricated via laser-directed energy deposition additive manufacturing followed by single-step tempering treatment. The influences of different tempering times at 600 °C on microstr...

(This article belongs to the Special Issue Development and Applications of Laser-Based Additive Manufacturing)
  • Article
  • Open Access
13 Citations
3,766 Views
20 Pages

20 July 2024

Detailed information on forest tree species is crucial to inform management and policy and support environmental and ecological research. Sentinel-2 imagery is useful for obtaining spatially explicit and frequent information on forest tree species du...

(This article belongs to the Special Issue Remote Sensing Applications for Forest Ecosystem Monitoring and Spatial Modeling)
  • Article
  • Open Access
6 Citations
1,440 Views
14 Pages

10 October 2024

This study treats the problem of Finite Time Stability Analysis (FTSA) and Finite Time Feedback Control (FTFC), using a Linear Matrix Inequalities Approach (LMIA). It specifically focuses on Takagi–Sugeno fuzzy Time Delay Fractional-Order Syste...

(This article belongs to the Section B: Mathematics)
  • Article
  • Open Access
6 Citations
1,928 Views
23 Pages

9 September 2023

In recent years, various qualitative investigations of the properties of differential equations with different types of generalizations of Riemann–Liouville fractional derivatives were studied and stability properties were investigated, usually...

(This article belongs to the Special Issue Recent Advances in Theoretical and Numerical Analysis for Fractional and Integral Differential Equations)
  • Article
  • Open Access
27 Citations
8,096 Views
18 Pages

Plant production systems that are more sustainable than conventional monoculture croplands are the vision of future agriculture. With numerous environmental benefits, agroforestry is among the most promising alternatives. Although soil fungi are key...

(This article belongs to the Special Issue Composition and Dynamics of Plant and Soil-Associated Microbial Communities in Forest and Agricultural Ecosystems)
  • Article
  • Open Access
14 Citations
4,290 Views
11 Pages

4 June 2019

In this work, the effects on dry wear behavior of cold ring rolling (CRR) of GCr15 bearing steel, after quenching and tempering (QT) heat treatment are investigated. The effects on steel microstructures and wear mechanisms of CRR with different auste...

  • Article
  • Open Access
361 Views
24 Pages

Topography-Mediated Nonlinear Responses of Soil Organic Carbon Stocks to Multi-Gradient Warming and Precipitation Shifts in Northeast China’s Temperate Mountain Forests

  • Zicheng Wang,
  • Qianlai Zhuang,
  • Shuai Wang,
  • Zijiao Yang and ,
  • Fujun Sun,
  • Yang Wang,
  • Yan Sang,
  • Lingyue Wang and
  • Xinxin Jin
  • + 4 authors+ 0 author

27 August 2026

Soil organic carbon (SOC) in mountain forest ecosystems exerts critical controls over regional carbon balance and climate feedback loops. This study collected 209 stratified topsoil (0–30 cm) samples across temperate mountain forests of Northea...

(This article belongs to the Special Issue Soil Carbon in Forest Ecosystems: Stocks, Stability, and Vulnerability to Global Change)
  • Article
  • Open Access
22 Citations
5,468 Views
17 Pages

29 November 2019

The mechanical properties, microstructures and precipitation behaviors in AISI (American Iron and Steel Institute) H13 steel tempered at 863 K for 0.5, 2, 4, 10 and 20 h were investigated. The values for H13 tempered for 2–4 h resulted in die s...

(This article belongs to the Special Issue Strengthening Mechanisms in Metallic Materials)
  • Article
  • Open Access
4 Citations
1,641 Views
18 Pages

Annual Tree Biomass Increment Is Positively Related to Nonstructural Carbohydrate Pool Size and Depletion: Evidence for Carbon Limitation?

  • Xingchang Wang,
  • Guirong Hu,
  • Quanzhi Zhang,
  • Xiankui Quan and ,
  • Haiyan Zhang,
  • Doug P. Aubrey and
  • Chuankuan Wang
  • + 2 authors+ 0 author

1 April 2025

Nonstructural carbohydrates (NSCs) are key storage molecules that can be used for tree growth and metabolism. The trade-off between NSC storage and biomass production has been long reported on. However, the carbon source limitation (indicated by NSC...

(This article belongs to the Topic Forest Productivity, Carbon Dynamics and Eco-Environmental Response: Potential, Development and Challenges)
  • Article
  • Open Access
13 Citations
4,858 Views
13 Pages

25 May 2020

This study aims to investigate the microstructures, strength, and impact toughness of low-temperature bainite obtained by isothermal transformation at temperature below Ms (Martensite Starting temperature) for different times and tempering process in...

  • Article
  • Open Access
19 Citations
5,462 Views
25 Pages

27 November 2021

This study tested the ability of Sentinel-1 C-band to separate forest from other common land use classes (i.e., urban, low vegetation and water) at two different sites. The first site is characterized by temperate forests and rough terrain while the...

(This article belongs to the Special Issue SAR for Forest Mapping II)
  • Article
  • Open Access
10 Citations
3,115 Views
16 Pages

Remote Sensing Classification of Temperate Grassland in Eurasia Based on Normalized Difference Vegetation Index (NDVI) Time-Series Data

  • Xuefeng Xu,
  • Jiakui Tang,
  • Na Zhang,
  • Anan Zhang and ,
  • Wuhua Wang and
  • Qiang Sun
  • + 1 author+ 0 author

17 October 2023

The Eurasian temperate grassland is the largest temperate grassland ecosystem and vegetation transition zone globally. The spatiotemporal distribution and changes of grassland types are vital for grassland monitoring and management. However, there is...

(This article belongs to the Special Issue Remote Sensing Monitoring of Resources and Ecological Environment)
  • Feature Paper
  • Article
  • Open Access
54 Citations
8,220 Views
19 Pages

Detection of Irrigated and Rainfed Crops in Temperate Areas Using Sentinel-1 and Sentinel-2 Time Series

  • Yann Pageot,
  • Frédéric Baup,
  • Jordi Inglada,
  • Nicolas Baghdadi and
  • Valérie Demarez

17 September 2020

The detection of irrigated areas by means of remote sensing is essential to improve agricultural water resource management. Currently, data from the Sentinel constellation offer new possibilities for mapping irrigated areas at the plot scale. Until n...

(This article belongs to the Special Issue Irrigation Mapping Using Satellite Remote Sensing)
  • Article
  • Open Access
2 Citations
3,944 Views
11 Pages

19 December 2021

COVID-19 has forced students to readjust to online learning. The current study aimed to investigate attitudes of Polish students towards online education, relationships between learning preferences and temper traits, and differences in learning prefe...

(This article belongs to the Collection Education, Innovation and Training for Sustainable Development in the Context of COVID-19)
  • Article
  • Open Access
2 Citations
4,061 Views
19 Pages

Studies on Candidate Genes Related to Flowering Time in a Multiparent Population of Maize Derived from Tropical and Temperate Germplasm

  • Fengyun Ran,
  • Yizhu Wang,
  • Fuyan Jiang,
  • Xingfu Yin and ,
  • Yaqi Bi,
  • Ranjan K. Shaw and
  • Xingming Fan
  • + 2 authors+ 0 author

5 April 2024

A comprehensive study on maize flowering traits, focusing on the regulation of flowering time and the elucidation of molecular mechanisms underlying the genes controlling flowering, holds the potential to significantly enhance our understanding of th...

(This article belongs to the Special Issue Floral Biology 3.0)
  • Article
  • Open Access
23 Citations
3,881 Views
20 Pages

Time-Lag Effect of Climate Conditions on Vegetation Productivity in a Temperate Forest–Grassland Ecotone

  • Xinyue Liu,
  • Yun Tian,
  • Shuqin Liu,
  • Lixia Jiang and ,
  • Jun Mao,
  • Xin Jia,
  • Tianshan Zha,
  • Kebin Zhang,
  • Yuqing Wu and
  • Jianqin Zhou
  • + 5 authors+ 0 author

29 June 2022

Climate conditions can significantly alter the vegetation net primary productivity (NPP) in many of Earth’s ecosystems, although specifics of NPP–climate condition interactions, especially time-lag responses on seasonal scales, remain unc...

(This article belongs to the Section Forest Inventory, Modeling and Remote Sensing)
  • Feature Paper
  • Article
  • Open Access
5 Citations
3,526 Views
13 Pages

Tea (Camellia sinensis) is the second most popular beverage in the United States (water is the first), but there is essentially no commercial production due to limited knowledge regarding cultivars and propagation. The objective of this study was to...

(This article belongs to the Special Issue Tissue Culture Techniques and Molecular Markers of Horticultural Plants)
  • Article
  • Open Access
88 Citations
13,525 Views
29 Pages

Tree Species Classification in Temperate Forests Using Formosat-2 Satellite Image Time Series

  • David Sheeren,
  • Mathieu Fauvel,
  • Veliborka Josipović,
  • Maïlys Lopes and ,
  • Carole Planque,
  • Jérôme Willm and
  • Jean-François Dejoux
  • + 2 authors+ 0 author

7 September 2016

Mapping forest composition is a major concern for forest management, biodiversity assessment and for understanding the potential impacts of climate change on tree species distribution. In this study, the suitability of a dense high spatial resolution...

  • Article
  • Open Access
4 Citations
2,482 Views
27 Pages

Although many applications of fractional calculus have been reported in literature, modeling the physical world using this technique is still a challenge. One of the main difficulties in solving this problem is that the long memory property is necess...

(This article belongs to the Special Issue Advances in Fractional-Order Neural Networks, Volume II)
  • Article
  • Open Access
10 Citations
4,032 Views
16 Pages

6 December 2022

Assessing vegetation phenology is very important for better understanding the impact of climate change on the ecosystem, and many vegetation index datasets from different remote sensors have been used to quantify vegetation phenology from a regional...

(This article belongs to the Special Issue Remote Sensing of Climate-Vegetation Dynamics and Their Effects on Ecosystems)
  • Article
  • Open Access
2 Citations
3,018 Views
17 Pages

Fire as a Factor in the Dynamics of Meadow Vegetation: A Model Experiment in Western Siberia

  • Sergey Lednev,
  • Denis Kasymov,
  • Ivan Semenkov,
  • Galya Klink and ,
  • Mikhail Agafontsev and
  • Tatyana Koroleva
  • + 1 author+ 0 author

2 April 2024

The state of meadow vegetation in areas with different ages of experimental spring burnout (from 1 to 12 years ago) was studied in the Tomsk region for 3 years. On experimental plots of 1 m2 and 100 m2 (small- and middle-scale levels, respectively),...

(This article belongs to the Special Issue Vegetation Fires and Biomass Burning in Asia)
  • Article
  • Open Access
50 Citations
7,779 Views
19 Pages

Detection of Exotic Mosquito Species (Diptera: Culicidae) at International Airports in Europe

  • Adolfo Ibáñez-Justicia,
  • Nathalie Smitz,
  • Wietse den Hartog,
  • Bart van de Vossenberg and ,
  • Katrien De Wolf,
  • Isra Deblauwe,
  • Wim Van Bortel,
  • Frans Jacobs,
  • Alexander G. C. Vaux and
  • Arjan Stroo
  • + 6 authors+ 1 author

In Europe, the air-borne accidental introduction of exotic mosquito species (EMS) has been demonstrated using mosquito surveillance schemes at Schiphol International Airport (Amsterdam, The Netherlands). Based upon these findings and given the increa...

(This article belongs to the Special Issue Ecology, Epidemiology, Surveillance, and Control of Vectors and Vector-Borne Pathogens in Temperate Regions)
  • Article
  • Open Access
9 Citations
5,615 Views
13 Pages

GrasProg: Pasture Model for Predicting Daily Pasture Growth in Intensive Grassland Production Systems in Northwest Europe

  • Tammo Peters,
  • Christof Kluß,
  • Iris Vogeler,
  • Ralf Loges and ,
  • Friederike Fenger and
  • Friedhelm Taube
  • + 1 author+ 0 author

13 July 2022

Knowledge about pasture growth rates is crucial for optimizing forage use efficiencies in intensively managed pasture and silage-based dairy systems, enabling optimized cutting/grazing times for high yields with high forage quality. The aim of this s...

(This article belongs to the Section Grassland and Pasture Science)
  • Article
  • Open Access
10 Citations
3,068 Views
19 Pages

30 September 2023

Various disturbances like extreme climate events, fires, and insect outbreak severely impact forest ecosystems, and differences are expected between planted and natural forests. However, there is little information on the spatio-temporal dynamics of...

(This article belongs to the Section Forest Remote Sensing)
  • Article
  • Open Access
37 Citations
6,288 Views
30 Pages

Potential of Sentinel-1 C-Band Time Series to Derive Structural Parameters of Temperate Deciduous Forests

  • Moritz Bruggisser,
  • Wouter Dorigo,
  • Alena Dostálová,
  • Markus Hollaus and ,
  • Claudio Navacchi,
  • Stefan Schlaffer and
  • Norbert Pfeifer
  • + 2 authors+ 0 author

22 February 2021

With the increasing occurrence of forest fires in the mid-latitudes and the alpine region, fire risk assessments become important in these regions. Fuel assessments involve the collection of information on forest structure as, e.g., the stand height...

(This article belongs to the Section Forest Remote Sensing)
  • Article
  • Open Access
26 Citations
6,179 Views
16 Pages

3 January 2018

Fractional calculus provides efficient physical models to quantify non-Fickian dynamics broadly observed within the Earth system. The potential advantages of using fractional partial differential equations (fPDEs) for real-world problems are often li...

(This article belongs to the Special Issue Fractional Calculus: Theory and Applications)
  • Article
  • Open Access
101 Citations
11,215 Views
20 Pages

Evaluation of Sentinel-1 and 2 Time Series for Land Cover Classification of Forest–Agriculture Mosaics in Temperate and Tropical Landscapes

  • Audrey Mercier,
  • Julie Betbeder,
  • Florent Rumiano,
  • Jacques Baudry and ,
  • Valéry Gond,
  • Lilian Blanc,
  • Clément Bourgoin,
  • Guillaume Cornu,
  • Carlos Ciudad and
  • Laurence Hubert-Moy
  • + 7 authors+ 2 authors

24 April 2019

Monitoring forest–agriculture mosaics is crucial for understanding landscape heterogeneity and managing biodiversity. Mapping these mosaics from remotely sensed imagery remains challenging, since ecological gradients from forested to agricultur...

(This article belongs to the Special Issue Remote Sensing of Tropical Environmental Change)
  • Article
  • Open Access
1 Citations
2,526 Views
13 Pages

Hydrogen Diffusivity and Hydrogen Traps Behavior of a Tempered and Untempered Martensitic Steel

  • Edgar López-Martínez,
  • Samuel Eduardo Salud-Ordon,
  • Octavio Vázquez-Gómez,
  • Miguel Iván Dávila-Pérez and ,
  • Julio C. Villalobos and
  • Jesus Israel Barraza-Fierro
  • + 1 author+ 0 author

4 November 2025

The effect of tempering temperature and tempering time on the density of hydrogen traps, hydrogen diffusivity, and microhardness in a vanadium-modified AISI 4140 martensitic steel was determined. Tempering parameters were selected to activate the sec...

  • Article
  • Open Access
9 Citations
3,113 Views
12 Pages

The Evolution of a Microstructure during Tempering and Its Influence on the Mechanical Properties of AerMet 100 Steel

  • Hongli Wang,
  • Jian Zhang,
  • Jingtao Huang,
  • Chengchuan Wu and ,
  • Xianguang Zhang,
  • Zhonghong Lai,
  • Yong Liu and
  • Jingchuan Zhu
  • + 3 authors+ 0 author

27 October 2023

In order to provide guidance for furthering the balance of strength and toughness of AerMet 100 steel through tempering treatment, the effects of the tempering time on microstructure and mechanical properties are investigated. The microstructure evol...

(This article belongs to the Special Issue Microstructure, Mechanical Properties and Wear Performance of High-Strength Steels)
  • Article
  • Open Access
10 Citations
3,550 Views
10 Pages

Dilatometric and Microstructural Study of Martensite Tempering in 4% Mn Steel

  • Adam Grajcar,
  • Mateusz Morawiec,
  • Jose Antonio Jimenez and
  • Carlos Garcia-Mateo

7 October 2020

This paper presents the results of martensite tempering resistance in 4% Mn steel. The material was quenched and tempered at 350 °C for 15, 30, and 60 min. The analysis of the quenching and tempering was carried out using dilatometric and microst...

(This article belongs to the Special Issue Effects of Temperature and Strain Rate on Steel Strengthening)
  • Article
  • Open Access
7 Citations
3,332 Views
13 Pages

The Study of Hardness Evolution during the Tempering Process of 38MnB5Nb Ultra-High-Strength Hot Stamping Steel: Experimental Analysis and Constitutive Models

  • Ping Luo,
  • Xianjun Li,
  • Wenliang Zhang,
  • Zhunli Tan and ,
  • Minghao Zhang,
  • Kaize Wang,
  • Pengdi Hou,
  • Junjie Liu and
  • Xiao Liang
  • + 4 authors+ 0 author

25 September 2023

To elucidate the hardness evolution behaviors for 38MnB5Nb ultra-high-strength hot stamping steel, a series of tempering processes with varying tempering temperatures and times were carried out with a dilatometer. Meanwhile, the hardness of each samp...

(This article belongs to the Section Structural Integrity of Metals)
  • Article
  • Open Access
8 Citations
3,773 Views
13 Pages

21 February 2020

Cu precipitation strengthening was compared in steels after treatments with and without cold rolling. A 0.2% C steel containing up to 1.5% Cu was quenched and tempered. Cu precipitation took place during tempering and increased its yield strength (YS...

  • Article
  • Open Access
16 Citations
4,863 Views
18 Pages

Effects of Radio Frequency Tempering on the Temperature Distribution and Physiochemical Properties of Salmon (Salmo salar)

  • Rong Han,
  • Jialing He,
  • Yixuan Chen,
  • Feng Li and ,
  • Hu Shi and
  • Yang Jiao
  • + 1 author+ 0 author

21 March 2022

Salmon (Salmo salar) is a precious fish with high nutritional value, which is perishable when subjected to improper tempering processes before consumption. In traditional air and water tempering, the medium temperature of 10 °C is commonly used t...

(This article belongs to the Special Issue Applications of Radio Frequency Heating in Food Processing)
  • Article
  • Open Access
2 Citations
3,121 Views
17 Pages

24 July 2024

Existing optimization research on the crankshaft heat treatment process is mostly based on one-sided considerations, and less consideration is given to the matching of multiple process parameters, leading to irrational designs of heat treatment. To a...

(This article belongs to the Special Issue Advances in Metal Cutting, Casting, Forming and Heat Treatment)
  • Article
  • Open Access
268 Views
16 Pages

The Effect of Cu-Rich Nano-Precipitation on Hydrogen Embrittlement Performance in a Cu-Bearing Ultra-Low Carbon Steel

  • Haitao Cui,
  • Mengqi Wang,
  • Yuan Gao,
  • Zhanjie Gao and ,
  • Haicheng Liang,
  • Jinsong Liu and
  • Weina Zhang
  • + 2 authors+ 0 author

18 September 2026

A low-carbon Cu-bearing marine structural steel was fabricated based on the chemical composition of HSLA-100 steel. The microstructural evolution, variation in nanoscale Cu-rich precipitates, and their synergistic effects on the mechanical properties...

(This article belongs to the Special Issue Hot Deformation, Hydrogen Embrittlement and Weldability of Alloys: From Performance to Characterization)
  • Article
  • Open Access
3 Citations
2,821 Views
14 Pages

30 July 2024

Low-carbon bainitic steels are known for their excellent combination of strength and toughness, making them suitable for various industrial applications. Understanding the tempering behavior of these steels is crucial for optimizing their mechanical...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
1 Citations
2,564 Views
16 Pages

30 August 2025

The induction quenching–tempering process typically enhances the surface strength and core toughness of alloy steels by utilizing the skin effect. However, the impact of parameters like quenching current and heating time on the microstructure a...

  • Article
  • Open Access
46 Citations
9,158 Views
14 Pages

6 January 2019

The microstructure and wear behavior of a 500 Brinell hardness (HB) grade wear-resistant steel tempered at different temperatures were investigated in this study. The tempering microstructures and wear surface morphologies were studied by scanning el...

  • Article
  • Open Access
785 Views
17 Pages

Effect of a Low-Temperature Tempering Process on the Hot Air Drying Characteristics and Quality of Waxy Corn

  • Qingyun Sun,
  • Qina Yu,
  • Menglong Han,
  • Xianlong Yu and ,
  • Zhenchao Jia,
  • Dayong Guo,
  • Feng Zhao and
  • Zongchao Zhang
  • + 3 authors+ 0 author

A low-temperature tempering staged drying process was proposed in this study to minimize quality degradation and improve drying efficiency during waxy corn drying. Experiments of continuous drying, low-temperature tempering drying, and low-temperatur...

(This article belongs to the Special Issue Cutting-Edge Technologies in Grain Drying: Innovations for Efficiency, Quality, and Sustainability)
  • Article
  • Open Access
1 Citations
2,486 Views
14 Pages

In this paper, we investigate properties of solutions to a space-time fractional variable-order conformable nonlinear differential equation with a generalized tempered fractional Laplace operatorby using the maximum principle. We first establish some...

(This article belongs to the Special Issue Symmetry and Solutions of Fractional Differential Equations with Their Developments)
  • Article
  • Open Access
32 Citations
6,612 Views
13 Pages

Microstructure Evolution and Orientation Relationship of Reverted Austenite in 13Cr Supermartensitic Stainless Steel During the Tempering Process

  • Yiwei Zhang,
  • Chi Zhang,
  • Xiaomin Yuan,
  • Diankai Li and ,
  • Yuande Yin and
  • Shengzhi Li
  • + 1 author+ 0 author

15 February 2019

The transformation mechanism of reverted austenite and the amount of reverted austenite during the tempering process in supermartensitic stainless steel have been investigated by X-ray diffraction (XRD), electron backscattered diffraction (EBSD), and...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Steels)
  • Article
  • Open Access
2 Citations
2,202 Views
18 Pages

24 March 2024

Since the formation of reversed austenite during critical tempering treatment is an important factor affecting the mechanical properties of 13Cr4Ni martensitic stainless steel, a detailed study of the content and morphology of reversed austenite in h...

(This article belongs to the Special Issue Advances in Steel Materials: Structure, Processing, and Properties)
  • Article
  • Open Access
43 Citations
4,663 Views
9 Pages

22 July 2021

The tempering of low-alloy steels is important for controlling the mechanical properties required for industrial fields. Several studies have investigated the relationships between the input and target values of materials using machine learning algor...

of 24