Skip to Content
You are currently on the new version of our website. Access the old version .

1,172 Results Found

  • Communication
  • Open Access
4 Citations
3,175 Views
12 Pages

The Correction of Keystone Distortion in Czerny–Turner Spectrometer Using Freeform Surface

  • Guo Xia,
  • Defeng Yu,
  • Qingfa Pan,
  • Qin Pan and ,
  • Yanduo Li and
  • Xiaomeng Chen
  • + 1 author+ 0 author

11 August 2024

In the past, conventional Czerny–Turner spectrometers were usually designed to achieve high resolution while often ignoring astigmatism in the sagittal direction. In contrast, by replacing the focusing mirror with a freeform surface in the stru...

  • Article
  • Open Access
1 Citations
21 Views

Research on XRII Image Distortion Correction Based on Biharmonic Spline Surface Interpolation

  • Yuanjin Li,
  • Huazhong Shu,
  • Yang Chen,
  • Tao Wang and ,
  • Zuogang Yue and
  • Yang Wang
  • + 1 author+ 0 author

X-Ray Image Intensifier (XRII) suffers from serve distortion in C-arm CT imaging system. To overcome the challenging problem, this paper proposes a novel XRII correction based on the Biharmonic Spline Surface Interpolation (BSSI) framework. In our s...

  • Article
  • Open Access
3 Citations
6,038 Views
17 Pages

Measuring, analyzing, reducing, and optimizing distortions in map projections is important in cartography. In this study, we introduced a novel image-based angular distortion metric based on the previous spherical great circle arcs-based metric. Imag...

  • Article
  • Open Access
4 Citations
2,198 Views
11 Pages

The influence of fabrication and assembly errors on the surface distortion due to gravity of a 2 m primary mirror and its correction method are presented. The effect of fabrication errors on the surface distortion is verified by Monte Carlo analysis....

  • Article
  • Open Access
5 Citations
3,490 Views
18 Pages

Thanks to the line-scanning camera, the measurement method based on line-scanning stereo vision has high optical accuracy, data transmission efficiency, and a wide field of vision. It is more suitable for continuous operation and high-speed transmiss...

  • Communication
  • Open Access
7 Citations
4,017 Views
14 Pages

Free-form surfaces have good aberration correction capability and balance capability for nonrotationally symmetric imaging systems. In this study, we analyzed the quantitative relationship between X–Y polynomial combination and aberration for t...

(This article belongs to the Special Issue Advances in Photoelectric Tracking Systems)
  • Article
  • Open Access
2 Citations
1,531 Views
23 Pages

Analysis of Geometric Distortion in Sentinel-1 Images and Multi-Dimensional Spatiotemporal Evolution Characteristics of Surface Deformation Along the Central Yunnan Water Diversion Project

  • Xiaona Gu,
  • Yongfa Li,
  • Xiaoqing Zuo,
  • Cheng Huang and ,
  • Mingze Xing,
  • Zhuopei Ruan,
  • Yeyang Yu,
  • Chao Shi,
  • Jingsong Xiao and
  • Qinheng Zou
  • + 5 authors+ 0 author

20 September 2025

The Central Yunnan Water Diversion Project (CYWDP) is currently under construction and represents China’s most extensive and geologically challenging water transfer infrastructure, facing significant geohazard risks induced by intensive engineering a...

  • Article
  • Open Access
15 Citations
4,990 Views
19 Pages

The Anisotropic Distortional Yield Surface Constitutive Model Based on the Chaboche Cyclic Plastic Model

  • Jianyun Chen,
  • Keshi Zhang,
  • Zheng Kuang,
  • Guijuan Hu and ,
  • Qiao Song and
  • Yanjun Chang
  • + 1 author+ 0 author

12 February 2019

Considering the cross effect in the evolution of subsequent yield surfaces for metals, an anisotropic distortional yield surface constitutive model is developed. By introducing an anisotropic distortional hardening function into the isotropic hardeni...

  • Article
  • Open Access
7 Citations
2,863 Views
16 Pages

6 March 2020

The subsequent anisotropic yield behavior of 45 steel was predicted by the distortional yield surface constitutive model, which can describe the anisotropic subsequent yield and the cross effect of metal associating with loading history. The yield ch...

  • Article
  • Open Access
15 Citations
3,561 Views
34 Pages

22 November 2023

In this paper, a comprehensive theoretical framework for understanding surface-enhanced Raman scattering (SERS) measurements in both solution and thin-film setups, focusing on electromagnetic enhancement principles, was presented. Two prevalent types...

(This article belongs to the Section Biology and Medicines)
  • Communication
  • Open Access
823 Views
12 Pages

Surface-Stress-Induced Lattice Distortion in Nanolamellar Cementite

  • Marek Gocnik,
  • Maximilian Graf,
  • Peter Kunnas,
  • Anna Sophie Jelinek and ,
  • Daniel Marian Ogris,
  • Ronald Schnitzer and
  • Jozef Keckes
  • + 2 authors+ 0 author

13 August 2026

Cementite morphology is known to govern the mechanical performance of steels, yet its influence on actual crystal structure, like unit cell parameters, is not well quantified. Here, we show that cementite morphology-dependent surface stresses generat...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
5 Citations
4,029 Views
20 Pages

9 October 2021

Welding induced distortion causes dimensional inaccuracies in parts being produced and assembly fit-up problems during manufacturing. In this study, a framework is proposed to mitigate weld distortion at the design stage. A sequential approach is ado...

(This article belongs to the Special Issue Progress in Coatings Deposition by Advanced Welding and Welding-Related Processes)
  • Article
  • Open Access
8 Citations
11,056 Views
12 Pages

31 July 2009

Previous studies have suggested that the accuracy of temperature measurements by surface-moored buoys may be affected by distortions of the near-surface temperature structure by the buoy hull on calm, sunny days. We obtained the first definite observ...

(This article belongs to the Special Issue State-of-the-Art Sensors Technology in Japan)
  • Article
  • Open Access
11 Citations
1,425 Views
31 Pages

3 April 2025

Non-orthogonal multiple access (NOMA) has emerged as a key enabler of massive connectivity in next-generation wireless networks. However, conventional NOMA studies predominantly focus on two-user scenarios, limiting their scalability in practical mul...

(This article belongs to the Section Communications)
  • Article
  • Open Access
6 Citations
4,100 Views
17 Pages

Surface Shape Distortion Online Measurement Method for Compact Laser Cavities Based on Phase Measuring Deflectometry

  • Yongchen Zhuang,
  • Yamin Zheng,
  • Shibing Lin,
  • Deen Wang and ,
  • Yifan Zhang and
  • Lei Huang
  • + 1 author+ 0 author

Conventional phase measuring deflectometry (PMD) takes up a large measurement space and is not suitable for compact online measurement, as the liquid crystal display (LCD) has to be placed in parallel with the mirror under test. In this paper, a comp...

(This article belongs to the Special Issue Advances in Optical Metrology)
  • Article
  • Open Access
1,989 Views
18 Pages

Geometric Correction for Line-Scan Imaging: A 1D Projective–Polar Mapping for Highly Reflective Cylindrical Surfaces

  • Jian Qiao,
  • Junxi Zhu,
  • Yuemei Huang,
  • Xiaoqi Cheng and ,
  • Jingwei Yang,
  • Guojie Lu and
  • Haishu Tan
  • + 2 authors+ 0 author

3 March 2026

Optical inspection of highly reflective cylindrical components—such as stainless-steel vessels featuring both planar and curvilinear surfaces—presents significant challenges due to complex geometric distortions in single-pass imaging. Thi...

  • Article
  • Open Access
4 Citations
2,669 Views
9 Pages

Detecting Small Size Mass Loading Using Transversely Coupled SAW Resonator

  • Ran You,
  • Jiuling Liu,
  • Minghua Liu,
  • Yuxiang Zhang and ,
  • Zhiyuan Chen and
  • Shitang He
  • + 1 author+ 0 author

1 November 2021

In the detection of small size mass loading, such as a single cell, a micro droplet or an aerosol particle, the sensors with longitudinally coupled surface acoustic wave resonator (LC-SAWR) structure can hardly avoid waveform distortions. The relativ...

(This article belongs to the Special Issue Wireless and Passive Surface Acoustic Wave Sensor)
  • Article
  • Open Access
7 Citations
3,620 Views
12 Pages

6 May 2023

Lithium cobalt oxide (LiCoO2, LCO) has been widely used in electronic markets due to its high energy density and wide voltage range applications. Recently, high-voltage (HV, >4.5 V) operation has been required to obey the requirements of high ener...

(This article belongs to the Special Issue Polymer Composite Materials for Energy Storage)
  • Article
  • Open Access
193 Views
23 Pages

Thin-walled aluminium castings, such as stator housings for electric motors, are susceptible to distortion during and after machining due to the superposition of residual stress states introduced by casting, heat treatment and cutting. This paper inv...

  • Article
  • Open Access
555 Views
31 Pages

Adaptive B-Spline-Based Distortion Modeling and Calibration for Cameras with Freeform Lenses

  • Xiangyuan Wang,
  • Bin Wang,
  • Gang Li,
  • Botao Jiang and ,
  • Longxiang Huang and
  • Yan Ma
  • + 1 author+ 0 author

8 June 2026

Freeform lenses introduce spatially varying and asymmetric distortions that cannot be reliably modeled by conventional calibration frameworks. This work presents a calibration approach that represents the distortion field using a bicubic B-spline sur...

(This article belongs to the Section Computing and Artificial Intelligence)
  • Article
  • Open Access
10 Citations
3,132 Views
15 Pages

27 June 2022

Distortion and residual stress are two unwelcome byproducts of welding. The former diminishes the dimensional accuracy while the latter unfavorably affects the fatigue resistance of the components being joined. The present study is a multi-objective...

(This article belongs to the Special Issue Advances in the Experimentation and Numerical Modeling of Material Joining Processes)
  • Article
  • Open Access
6 Citations
5,113 Views
26 Pages

Surface Discharge Analysis of High Voltage Glass Insulators Using Ultraviolet Pulse Voltage

  • Saiful Mohammad Iezham Suhaimi,
  • Nouruddeen Bashir,
  • Nor Asiah Muhamad,
  • Nurun Najah Abdul Rahim and ,
  • Noor Azlinda Ahmad and
  • Mohd Nazri Abdul Rahman
  • + 1 author+ 0 author

9 January 2019

Surface discharges are precursors to flashover. To pre-empt the occurrence of flashover incidents, utility companies need to regularly monitor the condition of line insulators. Recent studies have shown that monitoring of UV signals emitted by surfac...

  • Article
  • Open Access
10 Citations
4,445 Views
16 Pages

A novel 2D imaging method for permittivity imaging using a meta-structure with a functional scanning defect is proposed, working in the millimeter wave-range. The meta-structure we used here is composed of a perforated metal plate with subwavelength-...

(This article belongs to the Special Issue Engineering Metamaterials)
  • Article
  • Open Access
9 Citations
5,021 Views
13 Pages

Spectroscopic Insight into Tetrahedrally Distorted Square Planar Copper(II) Complex: XRD/HSA, Physicochemical, DFT, and Thermal Investigations

  • Ahmed Boshaala,
  • Abrahem F. Abrahem,
  • Abdulla Ali Almughery,
  • Nabil Al-Zaqri and ,
  • Abdelkader Zarrouk,
  • Hassane Lgaz and
  • Ismail Warad
  • + 2 authors+ 0 author

28 September 2021

The reaction of bidentate N-S-thione-Schiff base, (E)-benzyl 2-(1-(4-chlorophenyl)-ethylidene)hydrazinecarbodithioate, with Cu(NO3)2·3H2O produced a cis-Cu(II) complex. The molecular structure was confirmed and characterized by CHN-EA, FAB-MS, IR, an...

(This article belongs to the Section Inorganic Crystalline Materials)
  • Article
  • Open Access
11 Citations
3,376 Views
13 Pages

Overview of an Experimental Program for Development of Yield Surfaces Tracing Method

  • Jan Štefan,
  • Slavomír Parma,
  • René Marek,
  • Jiří Plešek and ,
  • Constantin Ciocanel and
  • Heidi Feigenbaum
  • + 1 author+ 0 author

19 August 2021

This paper develops an experimental technique to evaluate the initial yield surfaces of metallic materials, as well as to study their evolution during plastic flow. The experimental tracing of yield surfaces is necessary for deriving and calibrating...

(This article belongs to the Topic Metallurgical and Materials Engineering)
  • Article
  • Open Access
11 Citations
6,579 Views
14 Pages

Using density functional theory (DFT) methods, we analyze the adsorption of acetylene and ethylene on the Si(001) surface in an unusual bond insertion mode. The insertion takes place at a saturated tetravalent silicon atom and the insight gained can...

(This article belongs to the Special Issue Coordination Chemistry of Silicon)
  • Article
  • Open Access
5 Citations
3,812 Views
20 Pages

18 December 2023

The problem of accurate source localization has been an area of focus in high-frequency surface wave radar (HFSWR) applications. However, antenna pattern distortion (APD) decreases the direction-of-arrival (DOA) estimation performance of the multiple...

(This article belongs to the Special Issue Innovative Applications of HF Radar)
  • Article
  • Open Access
135 Views
18 Pages

Investigation of the Discharge Characteristics Induced by Free Metallic Particles on Insulation Surfaces Under Low-Pressure Conditions

  • Wei Wang,
  • Yinzhang Cheng,
  • Xueting Bai,
  • Zhenyu Lu and ,
  • Kai Zhang,
  • Yu Liu,
  • Zhixiang Liu and
  • Zhipeng Lei
  • + 3 authors+ 0 author

19 October 2026

Metallic particles attached to epoxy resin surfaces can severely distort the local electric field, degrade surface-insulation reliability, and reduce the partial discharge inception voltage (PDIV), partial discharge extinction voltage (PDEV), and fla...

(This article belongs to the Section F6: High Voltage)
  • Article
  • Open Access
12 Citations
4,179 Views
28 Pages

Influence of Laser Polishing on the Material Properties of Aluminium L-PBF Components

  • Markus Hofele,
  • André Roth,
  • Patrick Hegele,
  • Tim Schubert and ,
  • Jochen Schanz,
  • David K. Harrison,
  • Anjali K. M. De Silva and
  • Harald Riegel
  • + 3 authors+ 0 author

27 April 2022

In this study, the influence of laser polishing on the microstructural and mechanical properties of additively manufactured aluminium AlSi10Mg Laser Powder Bed Fusion (L-PBF) parts is analysed. The investigation is carried out on a 5-axis laser cell...

(This article belongs to the Special Issue Advanced Manufacturing of Novel Metallic Related Materials)
  • Article
  • Open Access
20 Citations
4,203 Views
17 Pages

Thanks to the recent advent of the event horizon telescope (EHT), we now have the opportunity to test the physical ramifications of the strong-field near-horizon regime for astrophysical black holes. Herein, emphasizing the trade-off between tractabi...

(This article belongs to the Collection Open Questions in Black Hole Physics)
  • Article
  • Open Access
472 Views
14 Pages

28 July 2026

Polymorphic behavior has significant consequences in solid-state properties relevant to functional materials and pharmaceutical applications. This study reports the single-crystal X-ray structure of a new third unique polymorph of the photoluminescen...

(This article belongs to the Section Crystal Engineering)
  • Article
  • Open Access
6 Citations
5,359 Views
13 Pages

Investigations into the Surface Strain/Stress State in a Single-Crystal Superalloy via XRD Characterization

  • Haodong Duan,
  • Lu Qin,
  • Yanling Pei,
  • Shusuo Li and ,
  • Li-Dong Zhao,
  • Vincent Ji and
  • Shengkai Gong
  • + 2 authors+ 0 author

23 May 2018

The present study was aimed at determining the surface strain/stress state in an Ni-based single-crystal (SC) superalloy that was subjected to two different cooling rates from solid solution temperature through using the X-ray diffraction (XRD) metho...

  • Article
  • Open Access
18 Citations
5,924 Views
26 Pages

Novel UAV Flight Designs for Accuracy Optimization of Structure from Motion Data Products

  • Marlin M. Mueller,
  • Steffen Dietenberger,
  • Maximilian Nestler,
  • Sören Hese and ,
  • Jonas Ziemer,
  • Felix Bachmann,
  • Julian Leiber,
  • Clémence Dubois and
  • Christian Thiel
  • + 4 authors+ 0 author

31 August 2023

Leveraging low-cost drone technology, specifically the DJI Mini 2, this study presents an innovative method for creating accurate, high-resolution digital surface models (DSMs) to enhance topographic mapping with off-the-shelf components. Our researc...

(This article belongs to the Section Remote Sensing Image Processing)
  • Article
  • Open Access
14 Citations
1,638 Views
10 Pages

Curvature-Influenced Electrocatalytic NRR Reactivity by Heme-like FeN4-Site on Carbon Materials

  • Yajie Meng,
  • Ziyue Huang,
  • Xi Chen,
  • Yingqi Li and ,
  • Xueyuan Yan,
  • Jiawei Xu and
  • Haiyan Wei
  • + 2 authors+ 0 author

Two-dimensional carbon materials and their derivatives are widely applied as promising electrocatalysts and supports of single-atom sites. Theoretical investigations of 2D carbon materials are usually based on planar models, yet ignore local curvatur...

(This article belongs to the Section Computational and Theoretical Chemistry)
  • Article
  • Open Access
13 Citations
3,332 Views
12 Pages

10 January 2023

Accurate analysis of the air gap magnetic field is the focus of research in the field of precision permanent magnet linear synchronous motors. In this paper, the two-dimensional air gap magnetic field of a secondary trapezoidal Halbach permanent magn...

(This article belongs to the Special Issue Advances in Electromagnetic Analysis and Design of Electrical Machines and Devices)
  • Article
  • Open Access
3 Citations
4,106 Views
24 Pages

Reconstruction of the Instantaneous Images Distorted by Surface Waves via Helmholtz–Hodge Decomposition

  • Bijian Jian,
  • Chunbo Ma,
  • Yixiao Sun,
  • Dejian Zhu and ,
  • Xu Tian and
  • Jun Ao
  • + 1 author+ 0 author

Imaging through water waves will cause complex geometric distortions and motion blur, which seriously affect the correct identification of an airborne scene. The current methods main rely on high-resolution video streams or a template image, which li...

(This article belongs to the Special Issue Underwater Engineering and Image Processing)
  • Article
  • Open Access
5 Citations
5,187 Views
21 Pages

Imaging through a wavy water–air interface is challenging since light rays are bent by unknown amounts, leading to complex geometric distortions. Considering the restoration of instantaneous distorted images, this paper proposes an image recove...

(This article belongs to the Special Issue Developments of Computer Vision and Image Processing: Methodologies and Applications)
  • Technical Note
  • Open Access
6 Citations
2,904 Views
14 Pages

5 March 2021

We study how surface distortions of liquid samples due to a meniscus and a tilt of a semi-open coaxial test cell affect errors in a broadband permittivity determination. The study is based on the scattering parameters, obtained using the electromagne...

(This article belongs to the Special Issue Selected Papers of Microwave and Radar Week (MRW 2020))
  • Review
  • Open Access
5 Citations
5,311 Views
29 Pages

FEM Modeling of Electro-Acoustic Nonlinearities in Surface Acoustic Wave Devices: A Methodological Review

  • Andreas P. Mayer,
  • Elena A. Mayer,
  • Markus Mayer,
  • Werner Ruile and ,
  • Vikrant Chauhan,
  • Thomas Forster and
  • Karl C. Wagner
  • + 2 authors+ 0 author

7 August 2023

In the framework of electro-elasticity theory and the finite element method (FEM), a model is set up for the computation of quantities in surface acoustic wave (SAW) devices accounting for nonlinear effects. These include second-order and third-order...

(This article belongs to the Collection Featured Position and Review Papers in Acoustics Science)
  • Article
  • Open Access
11 Citations
12,298 Views
12 Pages

Map Projections Classification

  • Miljenko Lapaine and
  • Nedjeljko Frančula

Many books, textbooks and papers have been published in which the classification of map projections is based on auxiliary (developable) surfaces and projections are divided into conic, cylindrical and azimuthal projections. We argue that such a class...

(This article belongs to the Special Issue Feature Papers of Geographies in 2022)
  • Article
  • Open Access
796 Views
17 Pages

Adaptive Projector Photometric Compensation Under Dynamic Environment Lightings

  • Feng Zhang,
  • Siyu Xu,
  • Bingyan Duan,
  • Cheng Han and
  • Fabin Wang

10 March 2026

To mitigate color crosstalk in projected images induced by non-uniform projection surfaces and dynamic ambient lighting, we propose MAPCNet, an adaptive photometric compensation network that enables robust color reproduction across diverse environmen...

  • Article
  • Open Access
26 Citations
6,340 Views
26 Pages

11 December 2017

High-frequency (HF) radars are routinely used for remotely sensing ocean surface currents. However, the performance of the most widely used direction-finding HF radar is degraded due to the effect of the inevitable deviations of actual antenna patter...

(This article belongs to the Special Issue Ocean Radar)
  • Article
  • Open Access
6 Citations
3,858 Views
13 Pages

17 March 2020

Halogenidoantimonate(III) monohydrates of the (C4H12N2)[SbX5]·H2O (X = Cl, 1 or Br, 2) formula, crystallizing in the same monoclinic space group of P21/n, are isostructural, with an isostructurality index close to 99%. The single crystal X-ray...

(This article belongs to the Special Issue Non-Covalent Interaction in Solids and Large Clusters)
  • Article
  • Open Access
3 Citations
2,152 Views
32 Pages

The Impact of Upstream Static Deformation on Flow Past a Cylinder/Flare

  • Aaron Becks,
  • Tyler Korenyi-Both,
  • Jack J. McNamara and
  • Datta V. Gaitonde

Reynolds-averaged Navier–Stokes simulations are performed for supersonic turbulent flow over a cylinder/flare with upstream surface distortion representative of structural deformation induced via fluid–structural and fluid–thermal&n...

(This article belongs to the Special Issue Flight at Supersonic and Hypersonic Velocities: Aerodynamics, Flow Control, Propulsion)
  • Article
  • Open Access
625 Views
24 Pages

Robust Shape-from-Focus via Physics-Inspired Distortion-Aware Focal Depth Regression

  • Xin Li,
  • Wei Shen,
  • Jian Li,
  • Zhongsheng Zhai and ,
  • Xuhong Guan and
  • Zili Lei
  • + 1 author+ 0 author

27 May 2026

Shape-from-Focus (SFF) is attractive for microscopic three-dimensional measurement, but high dynamic range (HDR) surfaces and weak-textured surfaces distort the focus curve through saturation, spurious peaks, and low signal-to-noise ratios. These dis...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
3 Citations
1,913 Views
30 Pages

29 October 2025

This study investigates the impact of build orientation on thermal distortion, residual stress behaviour, and process efficiency in LPBF. Four orientation strategies, optimized for surface area, support volume, print time, and overheating, were gener...

(This article belongs to the Section D3: 3D Printing and Additive Manufacturing)
  • Article
  • Open Access
6 Citations
2,405 Views
15 Pages

Study of the Radiation Damage Kinetics in NbTiVZr High-Entropy Alloys Irradiated by Heavy Ions

  • Kayrat K. Kadyrzhanov,
  • Artem L. Kozlovskiy,
  • Dmitriy I. Shlimas,
  • Daryn B. Borgekov and ,
  • Sholpan G. Giniyatova,
  • Vladimir V. Uglov and
  • Maxim V. Zdorovets
  • + 2 authors+ 0 author

7 April 2023

The purpose of this paper was to study the kinetics of accumulation of radiation damage in the near-surface layer of a high-entropy NbTiVZr alloy upon irradiation with heavy Kr15+ ions and fluences of 1010–1015 ion/cm2. According to the data of...

(This article belongs to the Section Crystallography and Applications of Metallic Materials)
  • Article
  • Open Access
1 Citations
958 Views
20 Pages

30 April 2025

The objective of this work was to study distortion of the 3D surface textures measurement using the stylus tip technique. This distortion was simulated using a dilation procedure. Topographies of many machined surfaces of various characters measured...

(This article belongs to the Special Issue Precision and Ultra-Precision Subtractive and Additive Manufacturing Processes of Alloys and Steels, 2nd Edition)
  • Article
  • Open Access
4 Citations
4,517 Views
14 Pages

Healing Abutment Distortion in Implant Prostheses: An In Vitro Study

  • Chandrashekhar Pandey,
  • Bishwa Prakash Bhattarai,
  • Apiwat Riddhabhaya,
  • Natthamet Wongsirichat and
  • Dinesh Rokaya

Little has been studied regarding the repeated usage of healing abutments and their effects on the distortion of dental implant-healing abutment hex surfaces. Additionally, implant manufacturers do not provide specific guidelines on how many times a...

(This article belongs to the Special Issue Recent Advances in Dental Implants and Biomaterials)
  • Article
  • Open Access
446 Views
17 Pages

Mapping Distortion Correction in Null Testing of Sector-Shaped Off-Axis Aspheric Segments for Large Segmented Telescope

  • Sanfeng Hao,
  • Donghao Zheng,
  • Yonghong Zong,
  • Shuai Liu and ,
  • Xiyu Li and
  • Xin Gao
  • + 1 author+ 0 author

Segmented primary mirror technology overcomes the manufacturing limitations of large-aperture monolithic mirrors by assembling the primary mirror from multiple off-axis aspheric sub-mirrors. However, null testing of such off-axis aspheric surfaces wi...

(This article belongs to the Special Issue Optical System Design: From Fundamentals to Advanced Applications)

of 24