Skip to Content

9,146 Results Found

  • Article
  • Open Access
27 Citations
4,529 Views
12 Pages

28 November 2019

Diagnostics is a very important tool of knowledge in the field of historical buildings. In particular, non-destructive techniques allow to deepen the study of the mechanical characteristics of the historical walls without compromising the artistic va...

(This article belongs to the Special Issue Recent Advances in Structural Health Monitoring and Nondestructive Testing in Civil Engineering)
  • Article
  • Open Access
22 Citations
4,209 Views
14 Pages

7 September 2022

The frequency response function (FRF) in the frequency domain is a black box used to collect physical information and to indicate the modal characteristics of a dynamic system. Analyzing the collected FRF data through the impact hammer test, dynamic...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
1,390 Views
22 Pages

24 June 2025

The expansion of unobstructed floor plans has resulted in large open areas, especially in modern designs. Although these new designs are appealing and esthetically attractive, they remain at a risk of large fires which may initiate at certain locatio...

  • Article
  • Open Access
3 Citations
1,468 Views
24 Pages

25 June 2025

The seismic design of underground or aboveground structures is commonly based on the free-field assumption, which neglects the interaction between underground structures–soil–aboveground structures (USSI). This simplification may lead to...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
12 Citations
11,389 Views
27 Pages

When a cognitive ability is assessed repeatedly, test scores and ability estimates are often observed to increase across test sessions. This phenomenon is known as the retest (or practice) effect. One explanation for retest effects is that situationa...

  • Article
  • Open Access
20 Citations
5,431 Views
15 Pages

2 October 2017

Polyurethane-steel sandwich structure, which creatively uses the polyurethane-steel sandwich composite as a structural material, is proposed to strengthen the impact resistance of buildings under debris flow. The impact resistance of polyurethane-ste...

(This article belongs to the Special Issue Development and Application of Nonlinear Dissipative Device in Structural Vibration Control)
  • Article
  • Open Access
26 Citations
7,550 Views
18 Pages

15 April 2019

The primary barrier in contact with LNG (Liquefied natural gas) cargo is manufactured from stainless steel, and has a corrugated membrane structure due to thermal deformation caused by extreme temperature differences. Because the primary barrier is t...

(This article belongs to the Section Mechanical Engineering)
  • Review
  • Open Access
11 Citations
3,994 Views
31 Pages

15 January 2024

The use of nonlinear, large-deformation, dynamic finite element analysis (FEA) has become a cornerstone in crash test simulations, playing a pivotal role in evaluating the safety performance of critical civil infrastructures, including soil-embedded...

  • Concept Paper
  • Open Access
76 Citations
12,456 Views
17 Pages

Non-Destructive Thermography Analysis of Impact Damage on Large-Scale CFRP Automotive Parts

  • Alexander Maier,
  • Roland Schmidt,
  • Beate Oswald-Tranta and
  • Ralf Schledjewski

14 January 2014

Laminated composites are increasingly used in aeronautics and the wind energy industry, as well as in the automotive industry. In these applications, the construction and processing need to fulfill the highest requirements regarding weight and mechan...

(This article belongs to the Special Issue Selected Papers from the 5th International Conference on "Structural Analysis of Advanced Materials”)
  • Article
  • Open Access
5 Citations
3,357 Views
20 Pages

26 September 2024

Several researchers have studied how impact loads from impact hazards affect reinforced concrete (RC) slabs. There is relatively little research on impact loading effects on pre-stressed structures. The usage of fibers in structural elements intrigue...

  • Article
  • Open Access
11 Citations
3,615 Views
29 Pages

1 July 2022

A sandwich structure is a composite material consisting of thin skins encapsulating a cellular core. Such structures have proven to be excellent energy absorbents and are frequently found in various types of protection. Even so, few studies exist in...

(This article belongs to the Special Issue Sandwich Composites: Design, Simulation and Applications)
  • Article
  • Open Access
7 Citations
2,516 Views
14 Pages

10 November 2024

The objective of this research paper is to examine the shock-absorption capabilities of sandwich structures that utilize polyurethane foam and aluminum as energy-absorbing materials. A series of drop weight impact tests were conducted on sandwich str...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
2,570 Views
17 Pages

Development of Indicator for Piled Pier Health Evaluation in Vietnam Using Impact Vibration Test Approach

  • Thi Bach Duong Nguyen,
  • Jungwon Huh,
  • Thanh Thai Vu,
  • Minh Long Tran and
  • Van Ha Mac

1 August 2024

Vietnam’s seaport system currently includes 298 ports with 588 wharves (a total length of approximately 92,275 m), which is vital in developing Vietnam’s marine economy. The piled pier, a type of wharf structure, is widely used and accoun...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
14 Citations
2,824 Views
18 Pages

Nondestructive Evaluation of Aluminium Foam Panels Subjected to Impact Loading

  • Gabriella Epasto,
  • Fabio Distefano,
  • Hozhabr Mozafari,
  • Emanoil Linul and
  • Vincenzo Crupi

27 January 2021

Aluminium foam sandwich structures have excellent energy absorption capacity, combined with good mechanical properties and low density. Some of the authors of this paper proposed an innovative Metallic Foam Shell protective device against flying ball...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
13 Citations
3,403 Views
11 Pages

8 June 2022

Porous concrete is an energy absorption material, which has been widely used in civil engineering, traffic engineering and disaster reduction engineering. However, the effect of pore structure on the impact behavior of the porous concrete is lacked....

(This article belongs to the Topic Innovative Construction and Building Materials)
  • Feature Paper
  • Article
  • Open Access
14 Citations
4,280 Views
14 Pages

9 July 2021

The design of strengthening and securing work for historic buildings requires knowledge of the masonry mechanical characteristics, often obtainable through laboratory tests that require invasive samples. The non-destructive techniques, applicable in...

(This article belongs to the Special Issue New Advance of Acoustic Emission and Microseismic Monitoring Technologies in Civil Engineering)
  • Article
  • Open Access
1,817 Views
13 Pages

4 September 2023

In order to study the deep mechanism of integrated power–gas system (IPGS) coupling, the influencing factors of IPGS coupling are investigated using the Decision Making Test and Evaluation Test–Interpretative Structural Modeling–Met...

(This article belongs to the Section Energy Sustainability)
  • Article
  • Open Access
2 Citations
3,336 Views
35 Pages

Bumper Impact Test Damage and Static Structural Characterization in Hybrid Composite Aided by Numerical Simulation and Machine Learning Analysis

  • Sugiri Sugiri,
  • Mochamad Bruri Triyono,
  • Yosef Budiman,
  • Yanuar Agung Fadlullah and ,
  • Rizal Justian Setiawan and
  • Muhamad Riyan Maulana
  • + 1 author+ 0 author

20 November 2025

Modern automotive design has increasingly embraced plastics for bumper construction; however, it can lead to material degradation. To overcome these limitations, the automotive industry is turning to fiber–resin material, namely carbon–epoxy composit...

(This article belongs to the Special Issue Vehicle Design Processes, 3rd Edition)
  • Article
  • Open Access
486 Views
20 Pages

Repeated-impact tests were carried out on a typical stiffened panel using both a wedge-shaped ice indenter and, for comparison, a rigid steel indenter under identical conditions. The tests were performed on a drop-weight impact system under a mass-lo...

(This article belongs to the Special Issue Advanced Analysis of Ship and Offshore Structures)
  • Article
  • Open Access
1 Citations
1,306 Views
24 Pages

Experimental and Numerical Study on Damage Characteristics of Web Frame Structure Under Conical Impact

  • Zhengjie Li,
  • Caixia Jiang,
  • Gaofei Wang,
  • Nan Zhao and ,
  • Yue Lu and
  • Kun Liu
  • + 1 author+ 0 author

This paper investigates the dynamic performance of web frame structures under the impact of a conical hammer head. Compared with existing research on flat plates and stiffened panels, web frame structures exhibit significant differences in load-beari...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
5 Citations
4,673 Views
28 Pages

10 July 2025

The global push for sustainable building practices has intensified the search for low-carbon, recyclable alternatives to traditional roofing materials. This study investigated the structural viability of corrugated panels fabricated from 100% post-co...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
12 Citations
4,105 Views
14 Pages

Validation of Frontal Crashworthiness Simulation for Low-Entry Type Bus Body According to UNECE R29 Requirements

  • Kostyantyn Holenko,
  • Oleksandr Dykha,
  • Eugeniusz Koda,
  • Ivan Kernytskyy and ,
  • Yuriy Royko,
  • Orest Horbay,
  • Oksana Berezovetska,
  • Vasyl Rys,
  • Ruslan Humenuyk and
  • Tomasz Wierzbicki
  • + 8 authors+ 3 authors

27 June 2024

Frontal crash tests are an essential element in assessing vehicle safety. They simulate a collision that occurs when the front of the bus hits another vehicle or an obstacle. In recent years, much attention has been paid to the frontal crash testing...

  • Article
  • Open Access
2 Citations
1,569 Views
20 Pages

2 February 2026

To address the increasing vulnerability of unmanned aerial vehicle (UAV) lightweight airframe structures to high-velocity fragment impacts in complex operational environments, this study combines high-velocity impact penetration tests, quasi-static s...

(This article belongs to the Topic Advances in Design, Manufacturing, and Dynamics of Complex Systems)
  • Article
  • Open Access
7 Citations
1,539 Views
23 Pages

Low-Velocity Impact Response of Novel TPMS and Stochastic Lattice Cores of Sandwich Structures

  • Alexandru Vasile,
  • Dan Mihai Constantinescu,
  • Iulian Constantin Coropețchi,
  • Ștefan Sorohan and
  • Andrei Ioan Indreș

18 June 2025

This study explores the mechanical performance of triply periodic minimal surface (TPMS) and stochastic lattice structures subjected to low-velocity impact. Two structurally promising geometries—one TPMS-based and one stochastic—were test...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
1 Citations
433 Views
17 Pages

Numerical Modeling and Experimental Characterization of the Mechanical Impact on a Dissimilar Structured Steel by GMAW

  • Ramsés Chávez Carrillo,
  • David Jaramillo,
  • César Mendoza and
  • Ricardo Rafael Ambriz

13 June 2026

The Charpy impact resistance of monolithic high-strength and dissimilar structured steel was studied. A gas metal arc welding process was used to fabricate the structured steel by depositing a layer of austenitic stainless steel, followed by a layer...

(This article belongs to the Special Issue Modeling, Simulation, and Optimization of Fluids, Materials, and Thermo-Mechanical Systems for Emerging Engineering Applications)
  • Review
  • Open Access
8 Citations
6,473 Views
40 Pages

A Review of Soil Constitutive Models for Simulating Dynamic Soil–Structure Interaction Processes Under Impact Loading

  • Tewodros Y. Yosef,
  • Chen Fang,
  • Ronald K. Faller,
  • Seunghee Kim and ,
  • Qusai A. Alomari,
  • Mojtaba Atash Bahar and
  • Gnyarienn Selva Kumar
  • + 2 authors+ 0 author

The accurate modeling of dynamic soil–structure interaction processes under impact loading is critical for advancing the design of soil-embedded barrier systems. Full-scale crash testing remains the benchmark for evaluating barrier performance;...

(This article belongs to the Special Issue Recent Advances in Soil–Structure Interaction)
  • Article
  • Open Access
17 Citations
3,944 Views
13 Pages

Full-Field Operational Modal Analysis of an Aircraft Composite Panel from the Dynamic Response in Multi-Impact Test

  • Ángel Molina-Viedma,
  • Elías López-Alba,
  • Luis Felipe-Sesé and
  • Francisco Díaz

25 February 2021

Experimental characterization and validation of skin components in aircraft entails multiple evaluations (structural, aerodynamic, acoustic, etc.) and expensive campaigns. They require different rigs and equipment to perform the necessary tests. Two...

(This article belongs to the Collection Vision Sensors and Systems in Structural Health Monitoring)
  • Article
  • Open Access
10 Citations
2,809 Views
27 Pages

To mitigate potential damage to RC structures subjected to impact load—especially spalling damage—engineered cementitious composite (ECC) is applied, with the aim of reinforcing the RC members, so as to improve their impact performance. I...

(This article belongs to the Special Issue Assessment and Retrofit of Buildings)
  • Article
  • Open Access
3 Citations
1,997 Views
18 Pages

Experimental and Simulation Studies on Protective Structures in Floating Dock

  • Zhengyao Wang,
  • Kun Liu,
  • Jingqiao Liu,
  • Qingao Meng and ,
  • Weijian Qiu and
  • Shuai Zong
  • + 1 author+ 0 author

In this research, two distinct designs of protective structures were developed to address structural damage caused by ships impacting the internal structures of floating docks during maintenance operations. The designed protective structures consist...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
29 Citations
6,467 Views
15 Pages

13 July 2020

Epoxy adhesives are widely used in various industries because of their high heat and chemical resistance, high cohesion, and minimal shrinkage. Recently, epoxy adhesives have been applied in the automotive industry as structural adhesives for lightwe...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
5 Citations
2,445 Views
12 Pages

Effect of Impact Position on Repaired Composite Laminates Subjected to Multi-Impacts

  • Paulo N. B. Reis,
  • Sara R. M. Coelho and
  • Abderrezak Bezazi

14 November 2022

Because the certification of aircraft structures requires significant costs and time-consuming experimental tests, all the studies carried out are strong contributions to the applicability of repairs based on adhesively bonded fibre composite patches...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
13 Citations
4,730 Views
15 Pages

2 February 2021

Epoxy structural adhesives have strong adhesion, minimal shrinkage and high thermal and chemical resistance. However, despite these excellent properties, their high-energy impact resistance should be improved to satisfy the increasing demands of the...

(This article belongs to the Section Polymer Chemistry)
  • Article
  • Open Access
30 Citations
4,993 Views
13 Pages

24 January 2022

Improving the balance of strength and toughness in structural materials is an ongoing challenge. Delamination and grain refinement are some of the methods used to do this. In this paper, two different steels, 0.15% C–0.3% Si–1.5% Mn&ndash...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
22 Citations
6,551 Views
11 Pages

Resistance to Cleavage of Core–Shell Rubber/Epoxy Composite Foam Adhesive under Impact Wedge–Peel Condition for Automobile Structural Adhesive

  • Jong-Ho Back,
  • Dooyoung Baek,
  • Jae-Ho Shin,
  • Seong-Wook Jang and ,
  • Hyun-Joong Kim,
  • Jong-Hak Kim,
  • Hong-Kyu Song,
  • Jong-Won Hwang and
  • Min-Jae Yoo
  • + 4 authors+ 0 author

17 January 2019

Epoxy foam adhesives are widely used for weight reduction, watertight property, and mechanical reinforcement effects. However, epoxy foam adhesives have poor impact resistance at higher expansion ratios. Hence, we prepared an epoxy composite foam adh...

(This article belongs to the Special Issue Polymeric Foams)
  • Article
  • Open Access
1 Citations
829 Views
18 Pages

18 March 2026

Low-velocity impacts during manufacturing and maintenance (e.g., tool drops) can induce barely visible impact damage in composite aircraft structures, motivating sensing-assisted approaches for rapid post-event assessment. This study proposes and val...

(This article belongs to the Topic Recent Advances in Structural Health Monitoring, 2nd Volume)
  • Article
  • Open Access
3 Citations
3,465 Views
14 Pages

22 May 2020

Silty clay modified by fly ash and crumb rubber is a kind of sustainable subgrade filler that has good freeze–thaw resistance stability, but weak vibration isolation performance. The objective of this study was to improve the vibration isolatio...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
7 Citations
3,536 Views
25 Pages

Evaluation of Delaminations and Defects in Concrete Deck Using Non-Destructive Multi-Physical Scanning Technology

  • Ri-On Oh,
  • Hwang-Hee Kim,
  • Yeon-Jae Choo,
  • Sung-Ki Park and ,
  • Shanelle Aira Rodrigazo,
  • Jaeheum Yeon and
  • Chan Gi Park
  • + 2 authors+ 0 author

24 October 2024

Condition assessment of concrete bridge decks is critical for ensuring structural integrity and public safety, particularly as infrastructure ages. Traditionally, such assessments are made using destructive techniques, such as coring through concrete...

(This article belongs to the Special Issue Advancements in Green Building Materials, Structures, and Techniques)
  • Article
  • Open Access
1 Citations
3,493 Views
20 Pages

Slate–Cork Laminate Enhanced with Silicone for Habitat Industry Application

  • Juana Abenojar,
  • Sara López de Armentia and
  • Miguel Angel Martínez

12 May 2024

This study investigates the feasibility of using a composite material comprising slate reinforced with cork sheets for architectural purposes like facades and wall coverings. The research involves the comprehensive characterisation of both slate and...

(This article belongs to the Special Issue Advances in Building Fire Safety Engineering)
  • Article
  • Open Access
5 Citations
2,941 Views
12 Pages

18 December 2023

As the stress of the frame, especially the bottom side rail supports and bottom inclined supports, of a traditional LNG tank container could be significantly greater than its allowable stress, and the container cannot meet the strength requirement of...

  • Article
  • Open Access
1 Citations
1,277 Views
21 Pages

As a by-product of phosphate fertilizer production, phosphogypsum (PG) poses pressing environmental challenges that demand urgent resolution. To address the research gap in dynamic impact behavior of PG-modified concrete (PGC), this study developed t...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
800 Views
14 Pages

8 January 2026

Carbon-reinforced epoxy laminated composite (CREC) structures are increasingly utilized in high-speed marine vehicles (HSMVs) due to their high specific strength and stiffness; however, they are frequently subjected to impact loads like slamming and...

(This article belongs to the Special Issue Mechanical Behaviour of Polymeric-Based Systems Used in Engineering Applications, 2nd Edition)
  • Article
  • Open Access
4 Citations
3,203 Views
22 Pages

14 July 2021

The change in the value of the breaking energy is discussed here for selected steel grades used in building structures after subjecting the samples made of them to episodes of heating in the steady-state heating regime and then cooling in simulated f...

  • Article
  • Open Access
264 Views
22 Pages

Density Estimation in Heritage Timber Elements Using Resistograph Drilling Resistance

  • Yilién Cabrera Martín,
  • Carlo Baggio,
  • Silvia Santini and
  • Guillermo Íñiguez-González

Accurate structural diagnosis of timber elements in historic buildings requires minimally invasive and operationally reliable assessment methods compatible with heritage conservation principles. This study aims to estimate timber density in situ dire...

(This article belongs to the Collection The Conservation of Architectural and Urban Heritage: Sustainable and Creative Strategies)
  • Article
  • Open Access
6 Citations
1,613 Views
18 Pages

Low-Velocity Impact Behavior of PLA BCC Lattice Structures: Experimental and Numerical Investigation with a Novel Dimensionless Index

  • Giuseppe Iacolino,
  • Giuseppe Mantegna,
  • Emilio V. González,
  • Giuseppe Catalanotti and ,
  • Calogero Orlando,
  • Davide Tumino and
  • Andrea Alaimo
  • + 2 authors+ 0 author

1 October 2025

Lattice structures are lightweight architected materials particularly suitable for aerospace and automotive applications due to their ability to combine mechanical strength with reduced mass. Among various topologies, Body-Centered Cubic (BCC) lattic...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
36 Citations
14,522 Views
20 Pages

Quadcopter Unmanned Aerial Vehicle Structural Design Using an Integrated Approach of Topology Optimization and Additive Manufacturing

  • Luttfi A. Al-Haddad,
  • Alaa Abdulhady Jaber,
  • Wojciech Giernacki,
  • Zeashan Hameed Khan and ,
  • Khalid Mohsin Ali,
  • Mauwafak Ali Tawafik and
  • Amjad J. Humaidi
  • + 2 authors+ 0 author

14 June 2024

The performance of quadcopter frames, particularly in terms of weight and crash resistance, is significantly influenced by their structural design and manufacturing process. In this work, a methodology is proposed that integrates advanced principles...

  • Article
  • Open Access
440 Views
30 Pages

The crashworthiness of stiffened hull plates is essential for improving ship safety under collision and grounding loads. In this study, the impact resistance and energy-absorption mechanism of a U-shaped stiffened hull plate subjected to a wedge-shap...

(This article belongs to the Special Issue Advanced Analysis of Ship and Offshore Structures)
  • Article
  • Open Access
9 Citations
2,266 Views
21 Pages

Inspection of Damaged Composite Structures with Active Thermography and Digital Shearography

  • João Queirós,
  • Hernâni Lopes,
  • Luís Mourão and
  • Viriato dos Santos

This study comprehensively compares the performance of two non-destructive testing (NDT) techniques—active thermography (AT) and digital shearography (DS)—for identifying various damage types in composite structures. Three distinct compos...

(This article belongs to the Special Issue Editorial Board Members’ Collection Series: Modeling and Simulation of Composite Materials)
  • Article
  • Open Access
5 Citations
3,577 Views
27 Pages

28 October 2022

This paper investigates the multidimensional spatial effects of risk spillovers among Chinese financial institutions and the dynamic evolution of financial risk contagion in the tail risk correlation network over different time periods. We first meas...

(This article belongs to the Special Issue Complex Network Analysis in Econometrics)
  • Article
  • Open Access
3 Citations
2,536 Views
14 Pages

15 August 2022

Interface slip is one of the main failure forms of an anchor structure, but the debonding slip process of rockbolt cannot be directly observed under impact load, so it is important to study the failure mechanism of the interface debonding of an ancho...

(This article belongs to the Special Issue Advances in Harmless Disposal of Solid Waste in the Mining and Minerals Industry)
  • Article
  • Open Access
18 Citations
3,943 Views
13 Pages

9 November 2022

Lightweight structures with high energy absorption capacity are in high demand for energy absorption applications in a variety of engineering fields, such as aerospace, automotive, and marine engineering. Anti-impact composites are made of energy-abs...

(This article belongs to the Section Advanced Manufacturing)

of 183