- Article
We show that functionalization of SSZ-13 (CHA) and Fe-beta (*BEA) with copper using a recently reported solid-state ion-exchange method, facilitated by NH
We show that functionalization of SSZ-13 (CHA) and Fe-beta (*BEA) with copper using a recently reported solid-state ion-exchange method, facilitated by NH
NMR is the method of choice for molecular and ionic structures and dynamics investigations. The present review is devoted to solvation and mobilities in solid electrolytes, such as ion-exchange membranes and composite materials, based on cesium acid...
This work aimed to optimize the production of L-asparaginase (L-ASNase) from Aspergillus caespitosus CCDCA 11593 using Pereskia aculeata (Ora-pro-nóbis) leaf fiber as a substrate for solid-state fermentation (SSF), along with powdered whey pro...
The catalyst preparation route is well known to affect the copper loading and its electronic state, which influence the properties of the resulting catalyst. Electronic states of copper ions in copper-containing silicalites with the MFI-framework top...
Here, we report a highly efficient and stable catalytic system based on monometallic oxides supported on HY zeolites for the catalytic oxidation of chlorobenzene (CB). Among the transition and rare-earth metal oxides screened, the 30Cu/HY catalyst de...
In this study, the characterization of In-exchanged CHA zeolite (In-CHA (SiO2/Al2O3 = 22.3)) was conducted by in-situ X-ray diffraction (XRD) and ammonia temperature-programmed desorption (NH3-TPD). We also prepared other In-exchanged zeolites with d...
The infamous ‘structure–property relationship’ is a long-standing problem for the design, study and development of novel functional materials. Most conventional characterization methods, including diffraction and crystallography, give us a good descr...
Zinc oxide (ZnO) and zinc sulfide (ZnS) nanocomposites represent promising multifunctional photocatalysts due to their complementary band structures and synergistic charge separation. ZnO–ZnS nanocomposites with varied ZnS content were synthesi...
Extraction of metal ions from polluted waters and immobilization of metals in contaminated soils can be conducted using zeolites—porous aluminosilicate ion exchangers. The uptake of copper and zinc ions by the Georgian natural heulandite was st...
Solid Electrolyte Interphase (SEI) has been identified as the most important and least understood component in lithium-ion batteries. Despite extensive studies in the past two decades, a few mysteries remain: what is the chemical form of and degree o...
In this study, a Cu-promoted Fe/ZSM-5 catalyst was examined to reveal the effects of Cu species in selective oxidation of methane into methane oxygenates using H2O2 in water. Cu/ZSM-5, Cu-Fe/ZSM-5, and Fe/ZSM-5 catalysts were prepared using wet impre...
Fe/Beta catalysts were used for the selective catalytic reduction of nitric oxide with propylene (C3H6-SCR) under lean-burn conditions, which were prepared by liquid ion-exchange (LIE), solid-state ion-exchange (SIE), and incipient wet-impregnation (...
The bright luminescence of silver clusters in glass have potential applications in solid-state lighting, optical memory, and spectral converters. In this work, luminescent silver clusters were formed in the bulk of photo-thermo-refractive glass (15Na...
Solid-state electrolytes are currently receiving increasing interest due to their high mechanical strength and chemical stability for safe battery construction. However, their poor ion conduction and unclear conduction mechanism need further improvem...
Perfluoroalkylglucosides comprise a very important class of fluorine-containing surfactants. These compounds can be synthesized by using the Fisher reaction, starting directly from glucose and the required perfluoroalcohols. We wish to report on the...
Nanosized SSZ-13 was synthesized hydrothermally by applying N,N,N-trimethyl-1-adamantammonium hydroxide (TMAdaOH) as a structure-directing agent. In the next step, the quantity of TMAdaOH in the initial synthesis mixture of SSZ-13 was reduced by half...
Cu-SSZ-13, the most widely used catalyst in diesel selective catalytic reduction (SCR) systems, often suffers severe deactivation, including hydrothermal aging and ash poisoning. In comparison with traditional impregnation in laboratory work, a more...
To achieve a transition from conventional liquid-junction reference electrodes (LJF REs) to their all-solid-state alternatives, organic electrolytes are often introduced into the polymeric electrode membranes. In this article, we implement a theoreti...
Dynamic motion of NH3-solvated Cu sites in Cu-chabazite (Cu-CHA) zeolites, which are the most promising and state-of-the-art catalysts for ammonia-assisted selective reduction of NOx (NH3-SCR) in the aftertreatment of diesel exhausts, represents a un...
The treatment of chabazite (CHA), a natural zeolite, with the alkaline hydrothermal method to improve its ion-exchange capacity is a widely adopted route by environmental scientists for the purpose of better ammonium (
Fluorine-free hydrocarbon proton-exchange membranes offer an alternative to perfluorosulfonic acid (PFSA) electrolytes, but good membrane-level properties do not always translate into membrane-electrode assembly (MEA) performance. Here, dense poly(2,...
Carbon-based nanomaterials with carboxylation or chemical modification are widely used as electron-ion exchangers of solid electrodes. For reducing the complexity and dangerousness of the intermediate layer preparation, different original carbon-base...
Low-melting-point Ga–xSn eutectic composites and natural silicate mineral powders were used as the electrode and solid-state electrolyte, respectively, in all-solid-state batteries for green energy storage systems. The influences of the Sn cont...
Xylanolytic enzymes of the Fusarium species are closely associated with pathogenesis, where they soften plant cell walls to facilitate infection and nutrient uptake. This study investigated the xylanolytic system of Fusarium proliferatum PSA-3, a str...
Plant biomass constitutes the main source of renewable carbon on the planet. Its valorization has traditionally been focused on the use of cellulose, although hemicellulose is the second most abundant group of polysaccharides on Earth. The main enzym...
Mefloquine (MQ) is an antimalarial medication prescribed to treat or malaria prevention.. When taken by children, vomiting usually occurs, and new doses of medication frequently need to be taken. So, developing pediatric medicines using taste-masked...
Batteries are used as energy storage devices in various equipment. Today, research is focused on solid-state batteries (SSBs), replacing the liquid electrolyte with a solid separator. The solid separators provide electrolyte stability, no leakage, an...
Polyethylene oxide-based solid polymer electrolytes (SPEs) are of research interest because of their potential applications in all-solid-state Li+ batteries. However, despite their advantages in terms of compatibility with the electrodes and easy pro...
Shape-memory polymers (SMPs) exhibit notable shape-shifting behaviors under environmental stimulations. In a specific shape-memory cycle, the material can be temporarily fixed at diverse geometries while recovering to the same permanent shape driven...
Iron niobates, pure and substituted with copper (Fe1−xCuxNbO4 with x = 0–0.15), were prepared by the solid-state method and characterized by X-ray diffraction, Raman spectroscopy, and magnetic measurements. The results of the structural c...
This study aimed to explore a low cost and sustainable adsorbent to remove Sr2+ and Co2+ ions, which are major radioactive ions in nuclear wastewater. The material properties of the alkali-activated metakaoline as a function of soaking time at ambien...
Ceramic electrolytes hold application prospects in all-solid-state lithium batteries (ASSLB). However, the ionic conductivity of ceramic electrolytes is limited by their large thickness and intrinsic resistance. To cope with this challenge, a two-dim...
Solid polymer electrolytes (SPEs) are gaining attention as viable alternatives to traditional aqueous electrolytes in zinc–air batteries (ZABs), owing to their enhanced performance and stability. In this study, anion-exchange solid polymer elec...
Cellulose, as one of the most abundant natural biopolymers, has been widely used in textile industry. However, owing to its drawbacks of flammability and ignitability, the large-scale commercial application of neat cellulose is limited. This study in...
Native potato starch is an excellent carrier of minerals due to its inherent ion exchange capacity. Mineral enrichment not only changes the nutritional value but also influences starch pasting and swelling properties. Hydrothermal treatments like ann...
Finite-temperature density functional theory (DFT) has become of topical interest, partly due to the increasing ability to create novel states of warm-correlated matter (WCM).Warm-dense matter (WDM), ultra-fast matter (UFM), and high-energy density m...
The zinc–copper (Zn-Cu) voltaic battery is the first battery made in human history, but the Cu2+ dissolution issue leads to the reaction’s irreversibility. To tackle this challenge, solid-state electrolytes, ion exchange membranes, and fu...
A series of Cu–Mn–SSZ-13 catalysts were obtained by co-exchange of Mn and Cu into SSZ-13 together (ion exchange under a mixed solution of Cu(NO3)2 and Mn(NO3)2) and compared with Cu–SSZ-13 catalysts on the selective catalytic reduct...
LiZr2(PO4)3 (LZP) is a promising solid-state electrolyte for lithium-ion batteries owing to its structurally stable NASICON-type framework and potential for rapid Li-ion conduction. In this study, classical atomistic simulations were employed to inve...
Copper-based zeolite catalysts are widely used in methanol synthesis from methane oxidation, but their photothermal catalytic properties have seldom been explored. This study examines the effect of the preparation method on Cu-based zeolite composite...
Lithium-ion batteries (LIBs) have significantly advanced portable electronics, yet their reliance on flammable organic solvents and lithium dendrite formation pose safety risks. Solid-state batteries (SSBs), utilizing solid electrolytes, offer a safe...
The increasing generation of agro-industrial waste and its improper disposal have raised significant environmental concerns, highlighting the urgent need for sustainable alternatives which would repurpose these materials. In this context, enzymes suc...
Lithium (Li) ion sieve is considered to have great potential in the selective extraction of Li+ from complex Li+-containing brine owing to its cost-effectiveness, excellent adsorption performance, and environmental friendliness. Nevertheless, the def...
KSbTeO6 defect pyrochlore has been prepared from K2C2O4, Sb2O3, and 15% excess TeO2 by solid-state reaction at 850 °C. Direct methods implemented in the software EXPO2013 allowed establishing the basic structural framework. This was followed by a com...
Sodium-beta alumina is a solid-state electrolyte with outstanding chemical, electrochemical, and mechanical properties. Sodium polyaluminate is successfully employed in established Na–S and Na–NiCl2 cell systems. It is a promising candida...
With environmental pollution and energy shortages becoming increasingly severe, developing efficient energy conversion and storage technologies is crucial. Cu2Se has garnered significant attention as a thermoelectric material due to its abundant raw...
Due to the refractory nature of α-spodumene (LiAlSi2O6) and petalite (LiAlSi4O10), two major lithium minerals, conventional lithium recovery processes involve a high-temperature pre-treatment (>1000 °C) to induce a phase transition to te...
Fe-ZSM5 zeolite materials were prepared via solid-state ion exchange and comprehensively characterized using scanning electron microscopy (SEM) and X-ray diffraction (XRD). The XRD patterns confirm the successful loading of iron species onto the ZSM-...
This review discusses the roles of anion exchange membrane (AEM) as a solid-state electrolyte in fuel cell and electrolyzer applications. It highlights the advancement of existing fabrication methods and emphasizes the importance of radiation graftin...
Unique structural and chemical properties, such as ion exchange, developed inner surface, etc., as well as the wide possibilities and flexibility of regulating these properties, cause a keen interest in zeolites. They are widely used in industry as m...
of 2