A mathematical model for the reaction-diffusion equation is developed to describe the nutrient release profiles and degradation of poly(lactic acid) (PLA)-coated controlled-release fertilizer. A multi-diffusion model that consists of coupled partial...
The light-induced degradation (LID) phenomenon in solar cells reduces power generation output. Previously, a method was developed to prevent LID where a group III impurity that can replace boron is added to the silicon wafer. However, in a subsequent...
In the photovoltaic industry, there is great interest in increasing the power output of solar cells to achieve grid parity and to promote the widespread use of solar cells. However, despite many developments, a phenomenon called light-induced degrada...
Electrical insulation systems (EISs) are the principal reliability bottleneck of modern electrical machines (EMs). Among the many stresses acting on insulation, thermal stress is the most pervasive because it accelerates chemical reactions that progr...
This work examined the possibilities and limitations of model-free and model-based methods related to decrypting the kinetic complexity of multi-step thermo-oxidative degradation processes (as a testing system, a [4-(hydroxymethyl)phenoxymethyl] poly...
Extruded polystyrene (XPS) is a thermal insulation material extensively applied in building systems. It has attracted much attention because of outstanding thermal insulation performance, obvious flammability shortcoming and potential energy utilizat...
Over the past few decades, a significant number of large concrete structures with deterioration problems related to the alkali–silica reaction (ASR) have been identified in Portugal and worldwide. Assessing the condition of ASR-affected concret...
Natural fibers have been widely employed in different fields as composite materials. However, the thermal behavior of natural materials is not fully understood since the chemical components chemically interact with each other. Put simply, the thermal...
The chemical degradation of the perfluorinated sulfonic acid (PFSA) ion-exchange membrane as a result of an attack from a radical species, originating as a by-product of the oxygen reduction reaction, represents a significant limiting factor in a wid...
Municipalities output large amounts of solid waste into landfills, but degradation slows during the middle and late stages of treatment. Therefore, accelerating the treatment of degradable substances to achieve rapid stabilization, excavation, screen...
The degradation of caffeic acid under ultrasound treatment in a model system was investigated. The type of solvent and temperature were important factors in determining the outcome of the degradation reactions. Liquid height, ultrasonic intensity and...
Degradation models are commonly used to describe the generation of combustible gases when predicting fire behavior. A model may include many sub-models, such as heat and mass transfer models, pyrolysis models or mechanical models. The pyrolysis sub-m...
Kinetics of hydrothermal degradation of colorless polyethylene terephthalate (PET) waste was studied at two temperatures (300 °C and 350 °C) and reaction times from 1 to 240 min. PET waste was decomposed in subcritical water (SubCW) by hydrol...
The oxidation of cellulose to dialdehyde cellulose (DAC) is a process that has received increased interest during recent years. Herein, kinetic modeling of the reaction with sodium periodate as an oxidizing agent was performed to quantify rate-limiti...
Chemical or feedstock recycling of poly(methyl methacrylate) (PMMA) by thermal degradation is an important societal challenge to enable polymer circularity. The annual PMMA world production capacity is over 2.4 × 106 tons, but currently only 3.0 × 10...
The degradation of acyclovir (ACY) and atenolol (ATL) in the UV/peroxydisulfate (UV/PDS) process has been systematically considered, focusing on the degradation kinetics, theoretical models, and reaction pathways via applying a microfluidic UV reacti...
In this work, the degradation of sulfamethoxazole (SMX) and trimethoprim (TMP) via Fenton and Fenton-like processes was evaluated using Mn2+ as supporting catalyst in the Fenton reaction. The optimum conditions of degradation were also evaluated. Bes...
Clavulanic acid (CA) is a β-lactam antibiotic inhibitor of β-lactamase enzymes, which confers resistance to bacteria against several antibiotics. CA is produced in submerged cultures by the filamentous Gram-positive bacterium Streptomyces c...
17 June 2016
Perfluorooctanoic acid (PFOA) is an emerging contaminant of concern due to its toxicity for human health and ecosystems. However, successful degradation of PFOA in aqueous solutions with a cost-effective method remains a challenge, especially for gro...
The bacteriostatic antibiotics, sulfamethoxazole (SMX) and trimethoprim (TMP), have frequently been found in wastewater and surface water, which raises the concerns about their ecotoxicological effects. The indirect photochemical transformation has b...
Polyvinyl alcohol (PVA) is an emerging pollutant commonly found in industrial wastewater, owing to its extensive usage as an additive in the manufacturing industry. PVA’s popularity has made wastewater treatment technologies for PVA degradation a pop...
The thermal stability and aging kinetics of polyimides have garnered significant research attention. As a newly developed class of high thermal stability polyimide, the thermal aging characteristics and degradation kinetics of phenylene-capped polyim...
It is well known that water treatment of printing and dyeing wastewaters is problematic. In order to decompose dyes from dyestuff wastewater and convert them into almost harmless substances for the natural environment, an easily prepared, efficient,...
In the present study, the effect of dolomite and olivine as catalysts on the carbon dioxide (CO2) gasification of a candidate renewable solid recovered fuel, known as Subcoal™ was determined. Thermogravimetric analysis (TGA) was used to produce...
Batteries as a multi-disciplinary field have been analyzed from the electrical, material science and electrochemical engineering perspectives. The first principle-based four-dimensional degradation model (4DM) of the battery is used in the article to...
The thermal degradation kinetics and degradation products of IPBC during the heating process are investigated herein. Experiments were conducted at isothermal conditions from 60 °C to 150 °C. The remaining IPBC content was analyzed by high-pe...
This study investigated the degradation kinetics and product generation of ofloxacin (OFL) in the pipe network under different pipe materials, flow rate, pH, free chlorine concentration and temperature. The experiments done in the beaker and pipe net...
Molecular Modeling methods play a very important role in TiO2 photocatalysis. Recent advances in TiO2 photocatalysis have produced a number of interesting surface phenomena, reaction products, and various novel visible light active photocatalysts wit...
The thermal degradation behaviors and reaction kinetics of medical waste infusion bag (IB) and nasal oxygen cannula (NOC) were investigated under inert atmosphere with the heating rates of 5, 10, 15, and 25 K·min−1. Ozawa–Flynn&nda...
Although heterogeneous photocatalysis has shown promising results in degradation of contaminants of emerging concern (CECs), the mechanistic implications related to structural diversity of chemicals, affecting oxidative (by HO•) or reductive (by...
The sonochemical degradation in aqueous solution of methyl violet, chosen as a model of a basic dye, was studied. The ultrasonic degradation kinetics in water were found to be first-order and the degradation rate coefficient is 1.35×10-2 min-1 (R= 0....
Low-molecular-mass iron-reducing compounds (IRCs) were produced by entomopathogenic endophytic fungi Lecanicillium sp. ATA01 in liquid cultures. The extracellular hydrophilic extract contained three IRCs formed by peptides, iron and phenolate structu...
The current work aims to study the thermal degradation of the flame retardant polyurethane aerogel (FR_PU_aerogel) through multiple milligram-scale experimental methods. A systemic methodology for measuring the reaction kinetics and thermodynamics of...
This study investigates the effectiveness of blast furnace slags (BFSs) as catalysts in the ozonation process to degrade complex contaminants such as bezafibrate (BFZ) at different pH levels. The findings reveal that the presence of BFS enhances degr...
In recent years, electrochemical methods utilizing reactive electrochemical membranes (REM) have been considered as a promising technology for efficient degradation and mineralization of organic compounds in natural, industrial and municipal wastewat...
In agricultural production, pesticides play an important role in increasing crop yields. However, pesticide residues are caused by improper handling by users during the production process. Chlorine dioxide and ozone, as strong oxidants with similarit...
Iron is one of the most abundant elements in the Universe and Earth’s surfaces, and undergoes a redox change of approximately 0.77 mV in changing between its +2 and +3 states. Many contemporary terrestrial organisms are deeply connected to inor...
Drug substance degradation kinetics in solid dosage forms is rarely mechanistically modeled due to several potential micro-environmental and manufacturing related effects that need to be integrated into rate laws. The aim of our work was to construct...
The microbial degradation pathways of bicyclic monoterpenes contain unknown enzymes for carbon–carbon cleavages. Such enzymes may also be present in the betaproteobacterium Castellaniella defragrans, a model organism to study the anaerobic monoterpen...
Although the potential and beneficial characteristics of photocatalysis in the degradation of a good number of emerging pollutants have been widely studied and demonstrated, process design and scale-up are restrained by the lack of comprehensive mode...
The photocatalytic degradation of picloram (4-amino-3,5,6-trichloro-2-pyridincarboxylic acid), which is one of popular acidic herbicide, was investigated with the existence of titanium oxide (TiO2) under sunlight. The total photocatalytic degradation...
22 January 2023
Coumarins represent a broad class of compounds with pronounced pharmacological properties and therapeutic potential. The pursuit of the commercialization of these compounds requires the establishment of controlled and highly efficient degradation pro...
Reactive oxygen species (ROS) and reactive chlorine species (RCS) and their involvement in the degradation process are explored in this work by thorough kinetic modeling of the solar-activated hypochlorite degradation of Rhodamine B (RhB) dye. The ki...
Acinetobacter lwoffii is widely considered to be a harmful bacterium that is resistant to medicines and disinfectants. A. lwoffii NL1 degrades phenols efficiently and shows promise as an aromatic compound degrader in antibiotic-contaminated environme...
Aging reactions due to heat and radiation cause chain scissions and cross-linking in cross-linked polyethylene (XLPE). We have developed theoretical and numerical graph models to study the evolution of the gel fraction and network properties during a...
Non-destructive analysis of degradation mechanisms can be very beneficial for the prognostics and health management (PHM) study of lithium-ion batteries. In this paper, a type of graphite/LiCoO2 battery was cycle aged at high ambient temperature, the...
The outbreak of the coronavirus disease 2019 (COVID-19) raises questions about the effective inactivation of its causative agent, Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) in medical wastewater by disinfectants. For this reason, ou...
Li-air batteries have attracted interest as energy storage devices due to their high energy and power density. Li-air batteries are expected to revolutionize the automobile industry (for use in electric and hybrid vehicles) and electrochemical energy...
In this paper, the degradation of the diazo dye naphthol blue black (NBB) using the Galvano-Fenton process is studied experimentally and numerically. The simulations are carried out based on the anodic, cathodic, and 34 elementary reactions evolving...
Quinoline is a typical nitrogenous heterocyclic compound, which is carcinogenic, teratogenic, and mutagenic to organisms, and its wastewater is difficult to biodegrade directly. The bipolar electro-Fenton process was employed to treat quinoline solut...
of 17