- Article
A series of para-trifluoromethoxy-substituted and fluorobenzhydryl-functionalized 1,2-bis(imine)acenaphthene ligands: 1-[2,6-{(4-F-C6H4)2CH}2-4-F3COC6H2N]-2-(ArN)C2C10H6 (Ar = 2,6-Me2C6H3 L1, 2,6-Et2C6H3 L2, 2,6-iPr2C6H3 L3, 2,4,6-Me3C...
A series of para-trifluoromethoxy-substituted and fluorobenzhydryl-functionalized 1,2-bis(imine)acenaphthene ligands: 1-[2,6-{(4-F-C6H4)2CH}2-4-F3COC6H2N]-2-(ArN)C2C10H6 (Ar = 2,6-Me2C6H3 L1, 2,6-Et2C6H3 L2, 2,6-iPr2C6H3 L3, 2,4,6-Me3C...
Recently, polyolefin thermoplastic elastomers can be obtained directly using ethylene as a single feedstock via α-diimine nickel-catalyzed ethylene chain walking polymerization. Here, a new range of bulky acenaphthene-based α-diimine nick...
The catalytic performance of α-diiminonickel complexes is highly sensitive to structural modifications in their ligand frameworks. In this study, a series of unsymmetrical 2,3-bis(arylimino)butane-nickel complexes featuring ortho-2,6-dibenzhydr...
Achieving high polymerization activity and producing polyethylenes (PEs) with high molecular weight (Mw) as well as excellent mechanical performance remain key challenges in the development of new nickel complex catalysts. A series of five meta-chlor...
Polyolefin elastomers (POEs) produced by ethylene/α-olefin copolymerization are indispensable for high-end applications such as photovoltaic encapsulation, precision microelectronic protection, advanced foamed footwear, and automotive lightweig...
In this study, regenerated and nonregenerated off-the-road (OTR) ground tire rubber (GTR) was blended with low-density polyethylene (LDPE) to produce thermoplastic elastomers (TPE) by rotational molding. In particular, blending was performed by two d...
Adhesion of cords to elastomers is crucial for many elastomeric products, such as tires and V-belts. The best adhesion system so far is based on a combination of resorcinol, formaldehyde, and a latex (RFL). However, this cord treatment has serious di...
As most plastic materials disintegrate without being properly reused after they are discarded, this present study developed a novel thermoplastic elastomer (TPE) using recycled high-density polyethylene (rHDPE) and natural rubber (NR) with kenaf fibr...
Four examples of N,N-bis(aryl)butane-2,3-diimine–nickel(II) bromide complexes, [ArN=C(Me)-C(Me)=NAr]NiBr2 (where Ar = 2-(C5H9)-4,6-(CHPh2)2C6H2 (Ni1), Ar = 2-(C6H11)-4,6-(CHPh2)2C6H2 (Ni2), 2-(C8H15)-4,6-(CHPh2)2C6H2 (Ni3) and 2-(C12H23)-4,6-(C...
Poly(glycerol sebacate) (PGS), a biodegradable elastomer, has been extensively explored in biomedical applications for its favorable mechanical properties and biocompatibility. Efforts have been made to fabricate multifunctional PGS copolymer in rece...
The rapid expansion of the takeaway food industry has led to the widespread use of disposable gloves as food-contact materials, which may release microplastics (MPs) during use, posing potential risks to human health and the environment. This study i...
This study aimed to compare the color changes in two different orthodontic clear aligner systems after submersion in various beverages for 14 days. The tested aligner systems were Taglus Premium made of polyethylene terephthalate glycol (the TAG grou...
This work investigates the effect of ground rubber tire (GRT) particle size and their concentration on the morphological, mechanical, physical, and thermal properties of thermoplastic elastomer (TPE) blends based on recycled high-density polyethylene...
A new energetic curing reagent, Glycidyl azide polymer grafted tetrafunctional isocyanate (N100-g-GAP) was synthesized and characterized by FT-IR and GPC approaches. Polytriazole polyethylene oxide-tetrahydrofuran (PTPET) elastomer was prepared by N1...
Despite advances in material sciences and clinical procedures for surgical hygiene, medical device implantation still exposes patients to the risk of developing local or systemic infections. The development of efficacious antimicrobial/antifouling ma...
In the work presented here, we explore the upcycling of polyethylene terephthalate (PET) that was derived from water bottles. The material was granulated and extruded into a filament compatible with fused filament fabrication (FFF) additive manufactu...
In this article, ABA triblock copolymer (tri-BCP) thermoplastic elastomers with poly(ethylene oxide) (PEO) middle block and polyzwitterionic poly(4-vinylpyridine) propane-1-sulfonate (PVPS) outer blocks were synthesized. The PVPS-b-PEO-b-PVPS tri-BCP...
In order to increase the thermal stability of olefin polymerization precatalysts, new titanium(IV) complexes with diolate ligands differing in the degree of steric hindrances were synthesized from readily available precursor (±)camphor. The st...
Bottlebrush (BB) elastomers with water-soluble side chains and tissue-mimetic mechanical properties are promising for biomedical applications like tissue implants and drug depots. This work investigates the microstructure and phase transitions of BB...
The growing amount of synthetic polymeric materials is a great environmental problem that has to be solved as soon as possible. The main factor aggravating this problem is the abundance of products made from traditional synthetic polymer, such as pac...
A series of novel thermoplastic elastomers based on (poly(decamethylene terephthalamide/decamethylene isophthalamide), PA10T/10I) and poly(ethylene glycol) (PEG) were synthesized via a facile one-pot, efficient and pollution-free method. The thermal...
To improve the mechanical properties of polyurethane cross-linked poly (ethylene oxide-co-tetrahydrofuran) (P(E-co-T)) elastomers at room temperature, using poly (ethylene oxide-co-tetrahydrofuran) and high-molecular-weight polyethylene glycol (PEG)...
Since the polyurethane elastomer synthesis process is susceptible to moisture, polytriazole polyethylene oxide-tetrahydrofuran (PTPET) elastomer was used as a replacement owing to its mild production environment. In contrast to the conventional flask...
Polyurethane (PU) is one of the principal polymers in the global plastic market thanks to its versatility and continuous improvement. In this work, PU elastomeric materials having thermoregulating properties through the incorporation of microcapsules...
In this work, an isotactic polypropylene (PP) and a polyethylene–octene copolymer (POE) have been blended and injection-molded, obtaining solids and foamed samples with a relative density of 0.76. Different mold temperature and injection temper...
Polymeric antistatic additives offer improved resistance to migration compared with low-molecular-weight agents, but high loadings are generally required to establish effective charge-dissipation pathways in nonpolar polypropylene (PP). Herein, a ser...
Crystallization kinetics of various blends of poly(lactic acid) (PLA)/polyolefin elastomer (POE) was studied through nonisothermal experimental investigations and theoretical approaches. The PLA/POE blends were prepared in a melt mixing process by us...
Nickel-based ethylene polymerization catalysts have unique features, being able to produce macromolecules with a variable content of branches, resulting in polymers ranging from semicrystalline plastics to elastomers to hyperbranched amorphous waxes...
The present study proposes a novel silicone-based composite skin simulant to develop equivalent tensile properties and structures similar to the human scalp. The study utilised randomly distributed short polyethylene fibres and bioactive glass partic...
The use of polymer-modified binders in asphalt mixtures has become more widespread due to their reduced thermal susceptibility and improved rutting and fatigue resistance. Nevertheless, their high cost limits their application, thus making the use of...
In this research, thermoplastic waste (polyethylene and propylene) from waste electrical and electronic equipment (WEEE) was used to manufacture polymer composite materials that included talc, fly ash, and elastomers, with tailored electromagnetic in...
The impact of plastic pollution on the world and its inhabitants is yet to be fully measured. Significant quantities of microplastics and nanoplastics have been found in human organs, and many diseases have been traced to their presence. Even human p...
This paper presents the results of comparative research on materials used for a track steering system in an abrasive soil mass. Two types of elastomer tracks were tested: a steel-rubber stave from an asphalt paver and a rubber overlay used in vehicle...
Poly(ethylene glycol) (PEG)-based soft elastomers, bearing tertiary amine and hydroxyl groups, were synthesized in bulk from the epoxy–amine reaction between poly(ethylene glycol) diglycidyl ether (PEGDE) and a poly(etherdiamine), Jeffamine ED6...
Although considerable research has been directed at developing materials for ballistic protection, considerably less has been conducted to address non-firearm threats. Even fewer studies have examined the incorporation of particle-laden elastomers wi...
Fully biobased polylactide (PLA)/polyamide-11 (PA11) blends were prepared by melt mixing with an elastomer intermediate phase to address the low elasticity and brittleness of PLA blends. The incorporation of a biobased elastomer made of poly(butylene...
The foaming process and cellular morphologies of poly(styrene-co-acrylonitrile) (SAN)/chlorinated polyethylene (CPE) blends with supercritical carbon dioxide (scCO2) as a blowing agent were investigated in this study. As compared to pure SAN foam in...
This study evaluated the aging resistance of bitumen modified with integrated rubber–plastic thermoplastic elastomers (TPEs). Surface-activated low-Mooney reclaimed rubber was compounded with recycled high-density polyethylene, low-density poly...
Prosthetic and orthotic parts, such as prosthetic socket and inner sides of orthoses, are often in contact with human skin, giving bacteria the capability to adhere and form biofilms on the materials of those parts which can further cause infections....
Achieving multiple physical properties from a single material through three-dimensional (3D) printing is important for manufacturing applications. In addition, industrial-level durability and reliability is necessary for realizing individualized manu...
The present study is a focused and comprehensive analysis of the dielectric and thermal properties of twenty-four 3D printed polymers suitable for fused filament fabrication (FFF) in electronic applications. The selected polymers include various ther...
Hydrogel has been widely used in reservoir regulation for enhancing oil recovery, however, this process can experience negative influences on the properties and effects of the hydrogels. Therefore, developing novel hydrogels with excellent environmen...
Linear Low-Density Polyethylene (LLDPE) is a versatile polyolefin made by copolymerizing ethene with minor amounts of a 1-alkene. The short side chain branches in the comonomer units partly hinder the ability of the polyethylene main chain to crystal...
This work concerns the verification of the self-healing ability of PP-co-HUPy copolymers dispersed in epoxy systems. PP is the acronym for the Poly-PEGMA polymer, and HUPy refers to the HEMA-UPy copolymers based on ureidopyrimidinone (UPy) moieties....
The fabrication of robots and their embedded systems is challenging due to the complexity of the interacting components. The integration of additive manufacturing (AM) to robotics has made advancements in robotics manufacturing through sophisticated...
Ethylene/1-octene copolymers exhibit enhanced flexibility and impact resistance compared to polyethylene, which makes them well suited for applications in advanced plastics and elastomers. United-atom molecular dynamics (MD) simulations were conducte...
Novel actuator materials are necessary to advance the field of soft robotics. However, since current solutions are limited in terms of strain, strain rate, or robustness, a new actuator type was developed. In its basic configuration, this actuator co...
In this work, the development and application of multicomponents obtained from recycled polyethylene terephthalate (r-PET) waste and monotropic liquid crystals as anticorrosion coatings are reported. The r-PET raw material was alcoholyzed and reprodu...
Microplastic (MP) pollution in agricultural settings is an emerging field of study, with interest focusing on potential resource contamination of soil and water due to the use of plastic materials in farming practices. The Mississippi Delta, a highly...
The increasing interest in stretchable conductive composite materials, that can be versatile and suitable for wide-ranging application, has sparked a growing demand for studies of scalable fabrication techniques and specifically tailored geometries....
of 2