- Article
In order to solve the problem of randomness and volatility caused by the rapid growth of renewable energy (RE), energy storage systems (ESSs)—as an important means of regulation—can effectively improve the flexible regulation capacity of...
In order to solve the problem of randomness and volatility caused by the rapid growth of renewable energy (RE), energy storage systems (ESSs)—as an important means of regulation—can effectively improve the flexible regulation capacity of...
The spaceborne high-resolution and wide-swath synthetic aperture radar (HRWS-SAR) system combined with the ground moving target indication (GMTI) mode provides a promising prospect in the realization of wide-area target surveying and high-resolution...
In this study, a typical Grey–Taguchi method has been applied in order to select the optimal configuration of a solar air heater to achieve optimum performance. The analysis is performed for different system configurations in terms of collector...
The energy router (ER) is a crucial component in smart distribution networks, and its optimal configuration is essential for enhancing the operational efficiency, economy, and security of the grid. However, existing research rarely considers both the...
Integrated Energy Transmission Systems (IETSs) are essential to bridge the geographical gap between where energy is produced and where it is needed, transporting power from resource-rich regions to distant load centers. The fundamental challenge is t...
As the demand for power supply stability and reliability in the active distribution network (ADN) increases, the primary and secondary integrated intelligent switch (PSIIS) has become the primary choice for smart grid transformation in many weak infr...
Due to the challenges associated with the application of existing two-stage optimization methods in energy system capacity configuration, such as uncertainty scenario generation, multi-timescale coupling, and balancing economic and environmental bene...
The geotechnical centrifuge applied in various geotechnical engineering fields provides physical data for investigating mechanisms of deformation and failure and for validating analytical and numerical methods by simulating and studying the geotechni...
To address the issue of frequent power frequency overvoltage disconnection accidents in offshore WF caused by the capacitive effect of submarine cables, this paper proposes a double-layer RP optimal configuration method for large-scale offshore WF ba...
Electric thermal storage boilers (ETSBs) are important devices in enhancing the electric–thermal decoupling ability and spatiotemporal transfer of integrated energy system (IES), which is beneficial for improving system flexibility and energy u...
Firstly, the radar cross section (RCS) test results of the stealthy microsatellite of TianXun-1(TX-1) in the anechoic chamber are compared with the RCS numerically simulated by the physical optics method, and the accuracy of the physical optical meth...
In the context of new power systems, the rapid development of distributed renewable energy and the drive of dual carbon targets have prompted community-level clean energy and energy storage configuration to become the key to improving energy efficien...
The development of renewable energy in rural areas presents significant potential. Integrating renewable energy sources, such as wind power and photovoltaics, into microgrids as distributed generation systems offers a viable approach for local energy...
Under the background of the Energy Internet and the shared economy, it is of great significance to explore the collaborative planning strategies of multi-energy microgrids (MEMGs) and a shared energy storage operator (SESO) supported by shared energy...
With the rapid development of data centers, significant energy consumption challenges have emerged, with cooling system energy consumption accounting for over 30%. Traditional air cooling, limited by airflow organization issues, struggles to meet the...
This paper proposes a novel optimization method for fault current limiter (FCL) reactance configuration based on joint simulation and penalty function constraint optimization. By integrating MATLAB and ATP for joint simulation, the method accurately...
The weather research and forecasting (WRF) model is frequently used to investigate the meteorological field around nuclear installations. The configuration of physical process parameterization schemes in the WRF model has a significant impact on the...
An improved optimizer based on projection-iterative methods (IPIMO) is proposed to address the optimal configuration problem of multi-type energy storage systems (MT-ESS), with the objective of achieving synergistic minimization of comprehensive cost...
Removing the gearbox from the single-motor configuration of an electric vehicle (EV) would improve motor-to-wheel efficiency by preventing mechanical losses, thus extending the autonomy of the EV. To this end, a permanent-magnet Vernier machine (PMVM...
With the rapid growth of electric vehicles, charging demand at highway service areas has increased sharply, while insufficient charging facilities have intensified the mismatch between supply and demand. Existing studies on photovoltaic–energy...
In order to improve the accuracy and reliability of micro-electro mechanical systems (MEMS) navigation systems, an orthogonal rotation method-based nine-gyro redundant MEMS configuration is presented. By analyzing the accuracy and reliability charact...
Recently there have been many studies of power systems with a focus on “New and Renewable Energy” as part of “New Growth Engine Industry” promoted by the Korean government. “New And Renewable Energy”—especially focused on wind energy, solar energy an...
Global demographic shifts and rising population mobility have created a profound decoupling between dynamic population distributions and static public service facility configurations. This socio-spatial mismatch is particularly acute in less-develope...
The equivalent source method is widely applied to study structural acoustic radiation in an underwater environment. However, there is still uncertainty in arranging the equivalent source, and the current mainstream configuration method needs a large...
Configuration parameters of vehicular hybrid power systems (HPSs) are critical to their economy, weight, and fuel consumption. Many marine vehicles have parameters often set based on engineering experience when designing them, which often leads to ex...
Cantilever workpieces are widely used in the aerospace field; they produce vibrations easily and affect machining quality under the action of external forces. Enhancing the stiffness of the workpiece using a robot as a fixture is an effective means t...
Photovoltaic (PV) power generation has developed rapidly in recent years. Owing to its volatility and intermittency, PV power generation has an impact on the power quality and operation of the power system. To mitigate the impact caused by the PV gen...
In order to calculate heat transfer capacity and air-side pressure drop of an annular radiator (AR), one performance calculation method was proposed combining heat transfer unit (HTU) simulation and plate-and-fin heat exchanger (PFHX) performance cal...
In the context of high penetration of distributed energy resources and new load integration, existing research primarily focuses on capacity optimization under pre-established interconnection structures, addressing issues such as uneven spatiotempora...
With respect to the current campus energy systems, the research on energy storage deployment has focused mostly on single users or a single metric, making it difficult to accommodate diverse multiuser needs while efficiently utilizing the available r...
The ground current of a high-voltage direct current (HVDC) transmission system can cause DC bias in transformers near the grounding electrode during monopole operations, which affects the alternating current (AC) power system operation. Owing to mult...
The DC collection system for wind farms serves as a critical component for power transmission, making its reliable operation paramount. Currently, research on the operational reliability of DC collection systems in wind farms remains largely confined...
To address the issues of intensified source–load mismatch and peak-shaving pressure in microgrids under conditions of high-penetration distributed photovoltaic integration, this paper proposes a multi-objective optimization configuration method...
The discrete adjoint method was used to optimize the aerodynamic configuration in order to increase the efficiency and precision of design. The fully unstable simulation of propeller rotation was avoided using the quasi approach. In the meantime, the...
The present study is based on the application of an interval two-stage stochastic programming (ITSP) model in the Yinma River Basin. A robust method based on interval two-stage robust (ITSR) optimization is introduced to construct an optimization mod...
The coupling of renewable energy sources with electrolyzers under stand-alone conditions significantly enhances the operational efficiency and improves the cost-effectiveness of electrolyzers as a technologically viable and sustainable solution for g...
With the growing demand for industrial robots in the aerospace manufacturing process, the lack of positioning accuracy has become a critical factor limiting their broad application in precision manufacturing. To enhance robot positioning accuracy, on...
Disassembly is a pivotal technology to enable the circularity of electric vehicle batteries through the application of circular economy strategies to extend the life cycle of battery components through solutions such as remanufacturng, repurposing, a...
The present paper focuses on the Lagrange optimization of shock waves for a two-dimensional hypersonic inlet by limiting the cowl internal angle and inlet length. The results indicate the significant influences of geometric constraints on the configu...
Innovative designs such as morphing wings and terrain adaptive landing systems are examples of biomimicry and innovations inspired by nature, which are actively being investigated by aerospace designers. Morphing wing designs based on Variable Geomet...
Double-arch tunnels in inclined layered jointed rock masses face risks of lining cracking and collapse under bedding-inclined asymmetric stress (BIAS); however, related studies remain limited. Based on a case study of an expressway tunnel case in Zhe...
After a high proportion of photovoltaic is connected to the distribution network, it will bring some problems, such as an unbalanced source and load and voltage exceeding the limit. In order to solve them, this paper proposes an optimization method o...
As the power system develops towards a high proportion of renewable energy sources and power electronic devices, the power system suffers from poor frequency stability due to the lack of synthetic inertia. The grid-forming energy storage can not only...
Nanofluids in minichannels with various configurations are applied as cooling and heating fluids. Therefore, it is essential to have an optimal design of minichannels. For this purpose, a square channel with a cylinder in the center connected to wavy...
The T-tail configuration, while offering advantages for large transport aircraft, is susceptible to peculiar aerodynamic phenomena such as deep stall and flutter, necessitating high-fidelity dynamic scaling for wind tunnel testing. In order to addres...
To address wind power fluctuations causing curtailment and high costs, this study proposes an integrated method combining wind power forecasting with substation optimization. An enhanced Bidirectional Gated Recurrent Unit (BiGRU) model is developed b...
Frequency regulation is essential for the stability of a power grid with high load fluctuation and integration of new energies. Constrained by the large ramping, a generator alone is not capable of conducting load frequency controls effectively and e...
The integration of energy dissipation units into the Modular Multilevel Converter (MMC) enables surplus power dissipation without the need for additional energy dissipation devices outside the converter valve, thereby reducing the cost of the surplus...
In the Industry 4.0 environment, the new manufacturing transformation of mass customization for high-complexity and low-volume production is moving forward. Based on cyber-physical system (CPS) and Internet of things (IoT) technology, the flexible tr...
Compared with conventional synthetic aperture radar (SAR) three-dimensional (3D) imaging systems, distributed unmanned aerial vehicle (UAV) SAR systems offer enhanced flexibility and single-pass capability, enabling rapid 3D imaging. Their performanc...
of 97