Skip to Content

787 Results Found

  • Review
  • Open Access
1 Citations
1,982 Views
24 Pages

Advances in Magnetic and Electrochemical Techniques for Monitoring Corrosion and Microstructural Degradation in Steels

  • Polyxeni Vourna,
  • Pinelopi P. Falara,
  • Aphrodite Ktena,
  • Evangelos V. Hristoforou and
  • Nikolaos D. Papadopoulos

21 March 2026

Steels remain among the most widely used structural and engineering materials in modern infrastructure, energy systems, and industrial facilities. Their long-term reliability depends critically on the early detection of corrosion damage and microstru...

(This article belongs to the Special Issue Novel Insights into Corrosion and Electrochemical Behavior of Metals and Alloys)
  • Article
  • Open Access
4 Citations
1,927 Views
20 Pages

Correlating Microstructural and Mechanical Property Alteration with Process Parameters Using Thermal Signature Monitoring of Laser-Welded Inconel 625 Superalloy

  • Gulshad Nawaz Ahmad,
  • Mohammad Shahid Raza,
  • Barun Haldar,
  • Indrajeet Kumar and ,
  • Nirmal Kumar Singh and
  • Abdullah A. Elfar
  • + 1 author+ 0 author

24 November 2025

Inconel 625 is widely employed in high-temperature and corrosive environments, where the integrity of welded joints critically influences component performance. This study systematically investigates how laser beam welding (LBW) heat input governs co...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
9 Citations
2,674 Views
16 Pages

Hybrid Pressure Sensor Based on Carbon Nano-Onions and Hierarchical Microstructures with Synergistic Enhancement Mechanism for Multi-Parameter Sleep Monitoring

  • Jie Zou,
  • Yina Qiao,
  • Juanhong Zhao,
  • Zhigang Duan and ,
  • Junbin Yu,
  • Yu Jing,
  • Jian He,
  • Le Zhang,
  • Xiujian Chou and
  • Jiliang Mu
  • + 5 authors+ 0 author

1 October 2023

With the existing pressure sensors, it is difficult to achieve the unification of wide pressure response range and high sensitivity. Furthermore, the preparation of pressure sensors with excellent performance for sleep health monitoring has become a...

(This article belongs to the Topic Advanced Nanomaterials for Sensing Applications)
  • Article
  • Open Access
13 Citations
4,054 Views
15 Pages

23 January 2024

Cylindrical Inconel 718 specimens were fabricated via a blown-powder, laser-directed energy deposition (DED-L) additive manufacturing (AM) process equipped with a dual thermal monitoring system to learn key process–structure relationships. Ther...

(This article belongs to the Collection Additive Manufacturing: Alloy Design and Process Innovations)
  • Article
  • Open Access
2 Citations
1,297 Views
28 Pages

Fractional-Order Ultrasonic Sensing for Monitoring Microstructural Evolution in Cementitious Materials

  • Haoran Zheng,
  • Chao Lu,
  • Xiaoxiong Zhou,
  • Xuejun Jia and ,
  • Xiang Lv,
  • Zhihan Shi and
  • Guangming Zhang
  • + 2 authors+ 0 author

1 January 2026

Monitoring the early-age evolution of cementitious materials is essential for ensuring the quality and reliability of concrete structures. However, most ultrasonic approaches rely on empirical correlations and lack a physics-based mechanism to descri...

(This article belongs to the Special Issue Novel Sensors and Sensing Technology Used for Empowering High-End Equipment Structure)
  • Article
  • Open Access
1 Citations
1,248 Views
26 Pages

Corrosion, Microstructural Evolution and Non-Destructive Monitoring of High-Strength Low-Alloy Steels Under Multiparametric Marine Exposure

  • Polyxeni Vourna,
  • Pinelopi P. Falara,
  • Aphrodite Ktena,
  • Evangelos V. Hristoforou and
  • Nikolaos D. Papadopoulos

28 February 2026

High-strength low-alloy (HSLA) steels in marine environments suffer from microbiologically influenced corrosion (MIC) and hydrogen-assisted degradation. This study investigates the synergistic effects of sulfate-reducing bacterial biofilms, mechanica...

(This article belongs to the Special Issue Advances in High-Strength Low-Alloy Steels (2nd Edition))
  • Communication
  • Open Access
6 Citations
2,496 Views
9 Pages

11 April 2025

Flexible pressure sensors play a significant role in wearable electronics, human–machine interfaces, and health monitoring, and improving their performance has always been a major focus of research. Various microstructures have been proposed to...

(This article belongs to the Special Issue Flexible Sensing in Robotics, Healthcare, and Beyond)
  • Article
  • Open Access
1,651 Views
20 Pages

Development and Validation of a Universal Eating Monitor (UEM) for Distinguishing the Intake of Multiple Foods and Macronutrients

  • Li Xue,
  • Ying Liu,
  • Huihui Mei,
  • Ying Yu and ,
  • Huanan Zhang,
  • Lin Gao,
  • Zengguang Jin,
  • Lu Wang,
  • Chaoqun Niu and
  • John R. Speakman
  • + 5 authors+ 0 author

11 September 2025

Background/Objectives: Dietary microstructure affects energy intake. Traditional Universal Eating Monitors (UEMs) offer accuracy but are limited for monitoring diverse diets. We developed the ‘Feeding Table’, a novel UEM that simultaneous...

(This article belongs to the Section Nutrition Methodology & Assessment)
  • Review
  • Open Access
55 Citations
11,878 Views
51 Pages

7 August 2020

Electronic skin (e-skin), which is an electronic surrogate of human skin, aims to recreate the multifunctionality of skin by using sensing units to detect multiple stimuli, while keeping key features of skin such as low thickness, stretchability, fle...

(This article belongs to the Section Sensor Materials)
  • Article
  • Open Access
11 Citations
4,669 Views
12 Pages

5 July 2020

Controllable morphological metal catalytic materials have always been a focus in research. In the previous work, hexapod AgCl was successfully synthesized. In this paper, hexapod Ag@AgCl microstructures with diverse Ag contents are prepared through N...

(This article belongs to the Special Issue Emerging Nanostructured Catalytic Materials for Energy and Environmental Applications)
  • Article
  • Open Access
24 Citations
7,848 Views
14 Pages

Imaging Techniques and Scanning Electron Microscopy as Tools for Characterizing a Si-Based Material Used in Air Monitoring Applications

  • Suárez-Peña Beatriz,
  • Negral Luis,
  • Castrillón Leonor,
  • Megido Laura and ,
  • Marañón Elena and
  • Fernández-Nava Yolanda
  • + 1 author+ 0 author

11 February 2016

This paper presents a study of the quartz fibrous filters used as a substrate for capturing the particulate matter (PM) present in the air. Although these substrates are widely used in environmental applications, their microstructure has been barely...

(This article belongs to the Special Issue Materials and Nanomaterials for Environmental and Bio-Medical Applications)
  • Feature Paper
  • Article
  • Open Access
25 Citations
7,785 Views
14 Pages

Real-Time Quality Monitoring of Laser Cladding Process on Rail Steel by an Infrared Camera

  • Pornsak Srisungsitthisunti,
  • Boonrit Kaewprachum,
  • Zhigang Yang and
  • Guhui Gao

11 May 2022

Laser cladding is considered to be a highly complex process to set up and control because it involves several parameters, such as laser power, laser scanning speed, powder flow rate, powder size, etc. It has been widely studied for metal-part coating...

(This article belongs to the Special Issue High Performance Bainitic Steels)
  • Review
  • Open Access
421 Views
25 Pages

19 September 2026

Microstructured optical sensors (MOS) have emerged as transformative photonic devices offering unprecedented sensitivity, miniaturization, and multiplexing capability. This review synthesizes the state of the field for specialists in photonics and op...

(This article belongs to the Special Issue Microstructured Optical Sensors: Design, Fabrication and Applications)
  • Article
  • Open Access
388 Views
18 Pages

10 September 2026

Ultrasonic vibration-assisted machining (UVAM) can improve the machinability of difficult-to-machine titanium alloys; however, the relationship between machining-load fluctuations, subsurface microstructure, and electrochemical response remains insuf...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
23 Citations
4,937 Views
17 Pages

Flexible Piezoresistive Sensor Based on CNT/PVA Composite with Wide Linear Detection Range for Human Motion Monitoring

  • Lijun Chen,
  • Yucheng Huang,
  • Honglong Ning,
  • Yuxiang Liu and ,
  • Huacheng Tang,
  • Rui Zhou,
  • Shaojie Jin,
  • Jiahao Zheng,
  • Rihui Yao and
  • Junbiao Peng
  • + 5 authors+ 0 author

17 May 2025

In recent years, flexible pressure sensors have attracted significant attention due to their extensive application prospects in wearable devices, healthcare monitoring, and other fields. Herein, we propose a flexible piezoresistive sensor with a broa...

(This article belongs to the Special Issue Development of Applications of Polymer-Based Sensors and Actuators)
  • Article
  • Open Access
510 Views
15 Pages

Longitudinal Diffusion MRI Characterizes Persistent Perivascular Diffusivity Asymmetry and White Matter Abnormalities After Cranioplasty for Decompressive Craniectomy

  • Xinyu Xu,
  • Lulu Yang,
  • Jiuyu Gao,
  • Xiaoxuan Li and ,
  • Yifan Fu,
  • Minghao Xu,
  • Shilin Liu,
  • Yaotian Gao,
  • Keyi Lin and
  • Tao Jiang
  • + 6 authors+ 1 author

Background/Objectives: Delayed neurological deficits after decompressive craniectomy may improve after cranioplasty, but quantitative imaging markers for postoperative monitoring remain limited. This study evaluated diffusion tensor imaging analysis...

(This article belongs to the Section Medical Imaging and Theranostics)
  • Article
  • Open Access
10 Citations
5,523 Views
10 Pages

Growth of Magnetron-Sputtered Ultrathin Chromium Films: In Situ Monitoring and Ex Situ Film Properties

  • Alexandr Belosludtsev,
  • Anna Sytchkova,
  • Kazimieras Baltrusaitis,
  • Viktoras Vaicikauskas and ,
  • Vitalija Jasulaitiene and
  • Tatjana Gric
  • + 1 author+ 0 author

2 February 2023

We report a systematic nanoscale investigation on the ultrathin Cr film growth process and properties. Polycrystalline metallic films were manufactured by magnetron sputtering on fused silica substrates. The film growth was observed in situ by broad-...

(This article belongs to the Section Surface Engineering for Energy Harvesting, Conversion, and Storage)
  • Article
  • Open Access
24 Citations
3,362 Views
15 Pages

Impact of External Mechanical Loads on Coda Waves in Concrete

  • Fabian Diewald,
  • Niklas Epple,
  • Thomas Kraenkel,
  • Christoph Gehlen and
  • Ernst Niederleithinger

9 August 2022

During their life span, concrete structures interact with many kinds of external mechanical loads. Most of these loads are considered in advance and result in reversible deformations. Nevertheless, some of the loads cause irreversible, sometimes unno...

(This article belongs to the Special Issue Concrete and Concrete Structures Monitored by Ultrasound)
  • Article
  • Open Access
800 Views
32 Pages

Multi-Sensor Correlation of Torch Orientation and Energy Distribution for Tailored Process Manipulation in Arc-Based Directed Energy Deposition

  • Thomas Reindl,
  • Georgij Safronov,
  • Stefan Rotzsche,
  • Tom-Eric Adams and ,
  • Peter Mayr and
  • Josip Vincic
  • + 1 author+ 0 author

Wire-arc directed energy deposition (WA-DED) using dynamic multi-axis hardware is typically restricted to a neutral position (90°), limiting process flexibility and full exploitation of multi-axis capabilities. To unlock torch positioning and sti...

(This article belongs to the Special Issue Arc-Based Directed Energy Deposition: Processes, Applications and Monitoring)
  • Article
  • Open Access
1,359 Views
25 Pages

Magnetically Repulsive Cushion Triboelectric Nanogenerator for Rotating Machinery Structural Health Monitoring

  • Haojie Peng,
  • Yufen Wu,
  • Yanling Li,
  • Yingjie He and ,
  • Changke Wang,
  • Xin Na,
  • Qiang Tan,
  • Wei Qiu and
  • Xiaohong Yang
  • + 4 authors+ 0 author

4 June 2026

Rotor imbalance and abnormal vibration are classical operating conditions in rotating machinery and can often be identified by conventional vibration analysis. However, the development of low-power, self-powered, and distributed sensing nodes remains...

(This article belongs to the Section Fault Diagnosis & Sensors)
  • Article
  • Open Access
38 Citations
5,040 Views
13 Pages

A Flexible TENG Based on Micro-Structure Film for Speed Skating Techniques Monitoring and Biomechanical Energy Harvesting

  • Zhuo Lu,
  • Changjun Jia,
  • Xu Yang,
  • Yongsheng Zhu and ,
  • Fengxin Sun,
  • Tianming Zhao,
  • Shouwei Zhang and
  • Yupeng Mao
  • + 3 authors+ 0 author

Wearable motion-monitoring systems have been widely used in recent years. However, the battery energy storage problem of traditional wearable devices limits the development of human sports training applications. In this paper, a self-powered and port...

(This article belongs to the Special Issue Nanostructured Electrodes for High-Performance Supercapacitors and Batteries)
  • Article
  • Open Access
1 Citations
2,194 Views
17 Pages

Development of an In-Situ Multifrequency Electromagnetic Sensor for Real-Time Microstructure Monitoring in a Continuous Annealing Furnace

  • John W. Wilson,
  • Mohsen A. Jolfaei,
  • Lei Zhou,
  • Carl Slater and ,
  • Claire Davis and
  • Anthony J. Peyton
  • + 1 author+ 0 author

19 August 2025

The continuous annealing process is widely used in the production of advanced high-strength steels. However, to tightly regulate the mechanical properties of the steel, precise control of processing parameters is needed. Although some techniques are...

(This article belongs to the Special Issue Electromagnetic Sensing and Its Applications)
  • Article
  • Open Access
2 Citations
2,258 Views
12 Pages

Flexible Sensor with Material–Microstructure Synergistic Optimization for Wearable Physiological Monitoring

  • Yaojia Mou,
  • Cong Wang,
  • Xiaohu Jiang,
  • Jingxiang Wang and ,
  • Changchao Zhang,
  • Linpeng Liu and
  • Ji’an Duan
  • + 2 authors+ 0 author

7 August 2025

Flexible sensors have emerged as essential components in next-generation technologies such as wearable electronics, smart healthcare, soft robotics, and human–machine interfaces, owing to their outstanding mechanical flexibility and multifuncti...

(This article belongs to the Special Issue Advanced Materials for Flexible Sensing Applications and Electronics)
  • Article
  • Open Access
41 Citations
6,855 Views
26 Pages

Process Induced Preheating in Laser Powder Bed Fusion Monitored by Thermography and Its Influence on the Microstructure of 316L Stainless Steel Parts

  • Gunther Mohr,
  • Konstantin Sommer,
  • Tim Knobloch,
  • Simon J. Altenburg and ,
  • Sebastian Recknagel,
  • Dirk Bettge and
  • Kai Hilgenberg
  • + 2 authors+ 0 author

1 July 2021

Undetected and undesired microstructural variations in components produced by laser powder bed fusion are a major challenge, especially for safety-critical components. In this study, an in-depth analysis of the microstructural features of 316L specim...

(This article belongs to the Special Issue Advanced Characterization and On-Line Process Monitoring of Additively Manufactured Materials and Components)
  • Article
  • Open Access
12 Citations
4,444 Views
22 Pages

Skin-Inspired Tactile Sensor on Cellulose Fiber Substrates with Interfacial Microstructure for Health Monitoring and Guitar Posture Feedback

  • Rajat Subhra Karmakar,
  • Chia-Pei Chu,
  • Chia-Lin Li,
  • Chun-Hway Hsueh and ,
  • Ying-Chih Liao and
  • Yen-Wen Lu
  • + 1 author+ 0 author

22 January 2023

Skin-inspired flexible tactile sensors, with interfacial microstructure, are developed on cellulose fiber substrates for subtle pressure applications. Our device is made of two cellulose fiber substrates with conductive microscale structures, which e...

(This article belongs to the Section Wearable Biosensors)
  • Article
  • Open Access
19 Citations
5,369 Views
14 Pages

Flexible Sensors Array Based on Frosted Microstructured Ecoflex Film and TPU Nanofibers for Epidermal Pulse Wave Monitoring

  • Xue Wang,
  • Zhiping Feng,
  • Gaoqiang Zhang,
  • Luna Wang and ,
  • Liang Chen,
  • Jin Yang and
  • Zhonglin Wang
  • + 2 authors+ 0 author

3 April 2023

Recent advances in flexible pressure sensors have fueled increasing attention as promising technologies with which to realize human epidermal pulse wave monitoring for the early diagnosis and prevention of cardiovascular diseases. However, strict req...

(This article belongs to the Special Issue Feature Papers in Electronic Sensors)
  • Review
  • Open Access
47 Citations
8,775 Views
50 Pages

A Review of Diagnostics Methodologies for Metal Additive Manufacturing Processes and Products

  • Teng Yang,
  • Sangram Mazumder,
  • Yuqi Jin,
  • Brian Squires and ,
  • Mathew Sofield,
  • Mangesh V. Pantawane,
  • Narendra B. Dahotre and
  • Arup Neogi
  • + 3 authors+ 0 author

30 August 2021

Additive manufacturing technologies based on metal are evolving into an essential advanced manufacturing tool for constructing prototypes and parts that can lead to complex structures, dissimilar metal-based structures that cannot be constructed usin...

(This article belongs to the Topic Metallurgical and Materials Engineering)
  • Review
  • Open Access
24 Citations
5,046 Views
23 Pages

Symmetry and Its Application in Metal Additive Manufacturing (MAM)

  • Virginia Uralde,
  • Fernando Veiga,
  • Eider Aldalur,
  • Alfredo Suarez and
  • Tomas Ballesteros

1 September 2022

Additive manufacturing (AM) is proving to be a promising new and economical technique for the manufacture of metal parts. This technique basically consists of depositing material in a more or less precise way until a solid is built. This stage of mat...

(This article belongs to the Special Issue Advanced Materials, Structures, Symmetrical Design and Mechanism in Mechanical Engineering)
  • Article
  • Open Access
75 Citations
9,073 Views
12 Pages

UV Absorption Spectroscopy in Water-Filled Antiresonant Hollow Core Fibers for Pharmaceutical Detection

  • Mona Nissen,
  • Brenda Doherty,
  • Jonas Hamperl,
  • Jens Kobelke and ,
  • Karina Weber,
  • Thomas Henkel and
  • Markus A. Schmidt
  • + 2 authors+ 0 author

6 February 2018

Due to a worldwide increased use of pharmaceuticals and, in particular, antibiotics, a growing number of these substance residues now contaminate natural water resources and drinking supplies. This triggers a considerable demand for low-cost, high-se...

(This article belongs to the Special Issue Lab on Fiber Optrodes for Chemical and Biological Sensing: Recent Trends and Advances)
  • Article
  • Open Access
54 Citations
13,647 Views
15 Pages

19 February 2019

This work describes the development of a pressure-sensing array for noninvasive continuous blood pulse-wave monitoring. The sensing elements comprise a conductive polymer film and interdigital electrodes patterned on a flexible Parylene C substrate....

(This article belongs to the Special Issue Polymeric Sensors)
  • Article
  • Open Access
38 Citations
11,767 Views
15 Pages

Weldability and Monitoring of Resistance Spot Welding of Q&P and TRIP Steels

  • Pasquale Russo Spena,
  • Manuela De Maddis,
  • Gianluca D’Antonio and
  • Franco Lombardi

8 November 2016

This work aims at investigating the spot weldability of a new advanced Quenching and Partitioning (Q&P) steel and a Transformation Induced Plasticity (TRIP) steel for automotive applications by evaluating the effects of the main welding parameter...

(This article belongs to the Special Issue Advances in Welding Metal Alloys, Dissimilar Metals and Additively Manufactured Parts)
  • Article
  • Open Access
10 Citations
3,804 Views
12 Pages

5 October 2018

The availability of tools for predicting quality in high pressure die casting is a challenging issue since a large amount of defects is detected in components with a consequent worsening of the mechanical behavior. In this paper, a tool for predictin...

(This article belongs to the Special Issue Processing-Structure-Property Relationships in Metals)
  • Article
  • Open Access
1 Citations
2,408 Views
33 Pages

Scientific Research Support for the Construction and Operation of Inwashed Tailing Dumps at Operating Sites

  • Alan Lolaev,
  • Aleksandr Badoev,
  • Aleksan Oganesyan,
  • Emil Oganesyan and ,
  • Stanislav Dzeboev and
  • Ilya Tvauri
  • + 1 author+ 0 author

8 August 2023

Accidents at mining enterprises, including tailing dumps, pose significant threats to human lives, structures, and the environment. This study focuses on designing, constructing, and operating tailing dumps in Siberia’s northern region. To ensu...

  • Review
  • Open Access
1 Citations
2,088 Views
22 Pages

Ultrafast Laser-Enabled 3D Glass Microchannel Reactors

  • Xiaolong Li,
  • Jinxin Huang,
  • Jian Xu and
  • Ya Cheng

24 November 2025

Microchannel reactors are among the most important tools used for high-performance continuous-flow synthesis. However, most microchannel reactors manufactured with conventional micromachining techniques are limited to two-dimensional (2D) planar geom...

(This article belongs to the Special Issue Feature Review Papers in Optical Sensors)
  • Article
  • Open Access
1 Citations
613 Views
27 Pages

9 April 2026

As an emerging oilseed crop in China, peony seed oils account for 0.41% of the annual production of Chinese edible vegetable oils, and the oil-type peony seed is rich in alpha-linolenic acid (ALA). Moisture content and temperature are key factors in...

(This article belongs to the Special Issue Application of Artificial Intelligence and Machine Learning in Food Analysis)
  • Article
  • Open Access
1 Citations
770 Views
19 Pages

26 February 2026

The cement industry is a major contributor to global CO2 emissions, creating a need for monitoring techniques that support carbon capture strategies while assessing material performance. This study investigates the accelerated carbonation curing of c...

(This article belongs to the Section Advanced Materials Characterization)
  • Review
  • Open Access
20 Citations
4,718 Views
31 Pages

From 1D to 2D to 3D: Electrospun Microstructures towards Wearable Sensing

  • Jia-Han Zhang,
  • Xidi Sun,
  • Haitao Wang,
  • Jiean Li and ,
  • Xin Guo,
  • Sheng Li,
  • Yaqun Wang,
  • Wen Cheng,
  • Hao Qiu and
  • Lijia Pan
  • + 6 authors+ 1 author

Wearable sensors open unprecedented opportunities for long-term health monitoring and human–machine interaction. Electrospinning is considered to be an ideal technology to produce functional structures for wearable sensors because of its unique...

(This article belongs to the Section Materials for Chemical Sensing)
  • Article
  • Open Access
1,140 Views
10 Pages

17 June 2025

Wearable tactile sensors with high sensitivity can be potentially used to continuously monitoring physiological signals that are closely related to disease diagnosis and health condition tracking. However, the development of such tactile sensors invo...

(This article belongs to the Special Issue Smart Textile Materials: Design, Characterization and Application)
  • Article
  • Open Access
4 Citations
3,605 Views
22 Pages

26 January 2024

A miniature pneumatic bellows device was designed for in-situ testing inside the scanning electron microscope. The device uses a pneumatic actuator to load the specimen and displacement is directly monitored with a linear variable differential transf...

  • Article
  • Open Access
66 Citations
6,821 Views
12 Pages

21 February 2022

Flexible piezoresistive pressure sensors have been attracted a lot of attention due to their simple mechanism, easy fabrication, and convenient signal acquisition and analysis. Herein, a new flexible piezoresistive sensor based on microstructured ele...

(This article belongs to the Section Nanoelectronics, Nanosensors and Devices)
  • Article
  • Open Access
43 Citations
7,135 Views
13 Pages

A Sensitivity-Optimized Flexible Capacitive Pressure Sensor with Cylindrical Ladder Microstructural Dielectric Layers

  • Tian Hua,
  • Ziyin Xiang,
  • Xiangling Xia,
  • Zhangling Li and ,
  • Dandan Sun,
  • Yuanzhao Wu,
  • Yiwei Liu,
  • Jie Shang,
  • Jun Chen and
  • Runwei Li
  • + 5 authors+ 0 author

27 April 2023

Flexible capacitive pressure sensors have attracted extensive attention due to their dynamic response and good sensing capability for static and small pressures. Using microstructural dielectric layers is an effective method for improving performance...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
4 Citations
3,820 Views
9 Pages

Optical Detection Method for High Aspect Ratio Microstructures

  • Wenbin Wei,
  • Shuangyue Hou,
  • Zhao Wu,
  • Yue Hu and ,
  • Yi Wang,
  • Lijuan Chen,
  • Ying Xiong,
  • Yangchao Tian and
  • Gang Liu
  • + 4 authors+ 0 author

11 March 2020

High aspect ratio microstructures (HARMS) are of great importance for many application fields. Many defects are generated during the fabrication processes, especially in line microstructures, and it is necessary to examine the quality of the structur...

(This article belongs to the Section A: Physics)
  • Article
  • Open Access
4 Citations
3,965 Views
23 Pages

18 May 2020

In this research, some nondestructive ultrasonic techniques were employed to inquire into the effect of microstructural changes induced by thermal aging and cold work on the ultrasonic response. As thermal embrittlement is a risk to the safety of nuc...

(This article belongs to the Special Issue Microstructural and Mechanical Properties of Metallic Materials)
  • Article
  • Open Access
3 Citations
1,425 Views
15 Pages

Corrosion Resistance Properties of As-Sintered 17-4 PH Samples Additive-Manufactured Through Binder Jetting

  • Pietro Forcellese,
  • Wasiq Ali Khan,
  • Tommaso Mancia,
  • Michela Simoncini and ,
  • Matěj Reiser,
  • Milan Kouřil and
  • Tiziano Bellezze
  • + 2 authors+ 0 author

27 September 2025

The corrosion resistance and microstructural characteristics of 17-4 PH stainless steel fabricated through Metal Binder Jetting (MBJ) were investigated through Cyclic Potentiodynamic Polarization (CPP), Open Circuit Potential (OCP) monitoring, SEM-ED...

(This article belongs to the Section Corrosion and Protection)
  • Article
  • Open Access
1,038 Views
11 Pages

14 April 2026

This study developed a machine learning approach to detect carbide precipitation in the microstructure of austenitic stainless steel, specifically grade 316, using a convolutional neural network (CNN). Microstructural images were prepared and classif...

  • Review
  • Open Access
14 Citations
4,901 Views
49 Pages

A Review on In-Situ Monitoring in Wire Arc Additive Manufacturing: Technologies, Applications, Challenges, and Needs

  • Mohammad Arjomandi,
  • Jackson Motley,
  • Quang Ngo,
  • Yoosuf Anees and ,
  • Muhammad Ayaan Afzal and
  • Tuhin Mukherjee
  • + 1 author+ 0 author

22 December 2025

Wire Arc Additive Manufacturing (WAAM), also known as Wire Arc Directed Energy Deposition, is used for fabricating large metallic components with high deposition rates. However, the process often leads to residual stress, distortion, defects, undesir...

(This article belongs to the Special Issue In Situ Monitoring of Manufacturing Processes)
  • Article
  • Open Access
27 Citations
6,063 Views
11 Pages

Fatigue Behaviour and Crack Initiation in CoCrFeNiMn High-Entropy Alloy Processed by Powder Metallurgy

  • Zdeněk Chlup,
  • Stanislava Fintová,
  • Hynek Hadraba,
  • Ivo Kuběna and ,
  • Monika Vilémová and
  • Jiří Matějíček
  • + 1 author+ 0 author

17 October 2019

Single-phase equiatomic five-element high entropy alloy CoCrFeMnNi was prepared by powder metallurgy. Two materials with ultra-fine-grained microstructure were prepared by spark plasma sintering (SPS) of ball-milled powder at two sintering times (5 a...

  • Article
  • Open Access
89 Citations
14,218 Views
14 Pages

Microstructured Optical Fiber Sensors Embedded in a Laminate Composite for Smart Material Applications

  • Camille Sonnenfeld,
  • Sanne Sulejmani,
  • Thomas Geernaert,
  • Sophie Eve and ,
  • Nicolas Lammens,
  • Geert Luyckx,
  • Eli Voet,
  • Joris Degrieck,
  • Waclaw Urbanczyk and
  • Hugo Thienpont
  • + 9 authors+ 4 authors

28 February 2011

Fiber Bragg gratings written in highly birefringent microstructured optical fiber with a dedicated design are embedded in a composite fiber-reinforced polymer. The Bragg peak wavelength shifts are measured under controlled axial and transversal strai...

(This article belongs to the Special Issue Advanced Embedded Sensors)
  • Article
  • Open Access
42 Citations
4,801 Views
19 Pages

29 May 2022

Metal additive manufacturing (AM) is an innovative manufacturing technology that uses a high-power laser for the layer-by-layer production of metal components. Despite many achievements in the field of AM, few studies have focused on the nondestructi...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Alloys and Steels)
  • Review
  • Open Access
11 Citations
3,721 Views
45 Pages

Monitoring, Modeling, and Statistical Analysis in Metal Additive Manufacturing: A Review

  • Grant A. Johnson,
  • Matthew M. Dolde,
  • Jonathan T. Zaugg,
  • Maria J. Quintana and
  • Peter C. Collins

29 November 2024

Despite the significant advances made involving the additive manufacturing (AM) of metals, including those related to both materials and processes, challenges remain in regard to the rapid qualification and insertion of such materials into applicatio...

(This article belongs to the Special Issue Applications of Modeling and Machine Learning in Additive Manufacturing)

of 16