The expected outcome after a scaffold augmented hernia repair is the regeneration of a tissue composition strong enough to sustain biomechanical function over long periods. It is hypothesised that melt electrowriting (MEW) medical-grade polycaprolact...
Three-dimensional (3D) scaffold systems have proven instrumental in advancing our understanding of polymicrobial biofilm dynamics and probiotic interactions within the oral environment. Among oral probiotics, Streptococcus salivarius K12 (Ssk12) has...
In the present work, the porous metal-organic framework (MOF) Basolite®F300 (Fe-BTC) was tested as a potential drug-releasing depot to enhance the solubility of the anticancer drug paclitaxel (PTX) and to prepare controlled release formulations after...
Background: Pancreatic cystic lesions (PCLs) are frequently detected incidentally and vary from benign to malignant. Accurate differentiation between mucinous (M-PCLs) and non-mucinous PCLs (NM-PCLs) is essential for appropriate management. This stud...
Docetaxel (DTX), a taxane-based anticancer drug, and osthol (OTH), a coumarin-derivative compound, have shown anticancer effects against different types of cancers through various mechanisms. However, these drugs have low solubility in water and low...
Thymoquinone (TQ) is a water-insoluble natural compound isolated from Nigella sativa that has demonstrated promising chemotherapeutic activity. The purpose of this study was to develop a polymeric nanoscale formulation for TQ to circumvent its delive...
Ovarian cancer has a high mortality rate due to difficult detection at an early stage. It is necessary to develop a novel anticancer treatment that demonstrates improved efficacy while reducing toxicity. Here, using the freeze-drying method, micelles...
The differences in micro-environment between cancer cells and the normal ones offer the possibility to develop stimuli-responsive drug-delivery systems for overcoming the drawbacks in the clinical use of anticancer drugs, such as paclitaxel, doxorubi...
Developing nanoformulations of antitumor drugs represents a critical priority in addressing key challenges of free drug administration such as low therapeutic efficacy, poor bioavailability, and severe side effects, including high systemic toxicity....
Background/Objectives: This research focuses on the development and optimization of polymer–lipid hybrid nanoparticles (PLHNs) using two grades of mPEG-PCL co-polymers in combination with DPPC and lecithin to address the biopharmaceutical chall...
Pancreatic cystic lesions (PCLs) are increasingly identified via computerized tomography (CT) and magnetic resonance (MR), with a prevalence of 2–45%. Distinguishing mucinous PCLs (M-PCLs), which include intraductal papillary mucinous neoplasms...
The content and surface topology of tissue engineering scaffolds are two important parameters in regulating the cell behavior. In this study, a phase separation micromolding (PSµM) method was implemented to develop micro-groove-imprinted poly(&...
The side effects of doxorubicin (DOX) extremely limit its application in the treatment of malignant tumors. Nano-sized polymeric drugs based on the acidic microenvironment of tissular- or intra- tumor have attracted ample attention because of their p...
This work describes the development of a fast Model Predictive Control (MPC) algorithm for a Proton Exchange Membrane (PEM) fuel cell. The MPC cost-function used considers the sum of absolute values of predicted control errors (the L
Massive segmental bone defects present significant challenges in orthopaedic and maxillofacial reconstruction. As defect size increases, the disparity between tissue volume and diffusion-limited biological processes becomes more pronounced. This narr...
Recently, several thermogelling materials have been developed for biomedical applications. In this study, we prepared methoxy polyethylene glycol (MPEG)-b-(poly(ε-caprolactone)-ran-poly(2-chloride-ε-caprolactone) (PCL-ran-PfCL)) (MP-Cl) diblock copol...
Electroencephalography (EEG) is an emerging biometric trait because it is difficult to steal or forge and requires acquisition from living subjects. However, many EEG-based person identification methods rely on large enrollment datasets, increasing a...
Herein, dendrimer-modified montmorillonite (Mt)-decorated poly-Ɛ-caprolactone (PCL) and chitosan (CHIT)-based nanofibers were prepared. Mt was modified with a poly(amidoamine) generation 1 (PAMAMG1) dendrimer, and the obtained PAMAMG1–Mt w...
Angiogenesis is critical for local tumor growth. This study aimed to develop a three-dimensional two-layer co-culture system to investigate effects of cancer cells on the growth of endothelial cells (ECs). Poly(ε-caprolactone) (PCL) nanofibro...
Gel-polymer electrolytes offer a promising route toward safer and more stable sodium-ion batteries, but conventional polymer systems often suffer from low ionic conductivity and limited voltage stability. In this study, we developed composite GPEs by...
Acne is the over growth of the commensal bacteria Propionibacterium acnes (P. acnes) on human skin. Lauric acid (LA) has been investigated as an effective candidate to suppress the activity of P. acnes. Although LA is nearly insoluble in water, dimet...
Porous films have been prepared from degradable polymers—poly-3-hydroxybutyrate (PHB), poly-ε-caprolactone (PCL) and a blend of these polymers (1:3)—by adding porogen (camphor) to the polymer solution at 10%, 30% or 50% of the tot...
Natural cosmetic products have recently re-emerged as a novel tool able to counteract skin aging and skin related damages. In addition, recently achieved progress in nanomedicine opens a novel approach yielding from combination of modern nanotechnolo...
In this study, novel triblock copolymers, including poly(N-isopropylacrylamide)-block-poly(ε-caprolactone)-block-poly(N-isopropylacrylamide) (PNIPAM-b-PCL-b-PNIPAM), poly(N-vinyl-pyrrolidone)-block-poly(ε-caprolactone)-block-poly(N-vi...
Oral delivery, the most common method of therapeutic administration, has two significant obstacles: drug solubility and permeability. The challenges of current oral medicine delivery are being tackled through an emerging method that uses structures c...
The selection of a suitable combination of reference genes (RGs) for data normalization is a crucial step for obtaining reliable and reproducible results from transcriptional response analysis using a reverse transcription-quantitative polymerase cha...
The study analyzes the influence of plant growth promoters and biological control agents on the chemical composition and antioxidant activity (AA) in the sprouts of buckwheat. The AA of cv. Kora sprouts was higher than cv. Panda, with 110.0 µM...
The Genus Mycobacterium includes pathogens known to cause disease in mammals such as tuberculosis (Mycobacterium tuberculosis) and skin infections (M. abscessus). M. smegmatis is a model bacterium that can cause opportunistic infections in human tiss...
Polycaprolactone (PCL) is one of the promising linear aliphatic polyesters which can be used as mulching film. Although it has suitable glass transition temperature and good biodegradability, further practical applications are restricted by the limit...
In this study, polylactic acid (PLA) was blended with poly(ε-caprolactone) (PCL) and reinforced with nanosilica (SiO2) to tailor surface characteristics and improve adhesion in biopolymer-based printed packaging applications. The surface micr...
The objective of this study was to synthesize and characterize a set of biodegradable block copolymers based on TPGS-block-poly(ε-caprolactone) (TPGS-b-PCL) and to assess their self-assembled structures as a nanodelivery system for paclitaxel (PAX)....
Novel tough hydrogel materials are required for 3D-printing applications. Here, a series of thermoplastic polyurethanes (TPUs) based on poly(ɛ-caprolactone)-b-poly(ethylene glycol)-b-poly(ɛ-caprolactone) (PCL-b-PEG-b-PCL) triblock copolymers and hexa...
Halting liver fibrosis progression is a key goal in treating liver disease, yet effective antifibrotic drugs remain unavailable. This study explores the use of precision-cut liver slices (PCLS) as an ex vivo model to evaluate new therapies. Researche...
This work presents the first example of utilization of amphiphilic block copolymer PCL-PEG-PCL as a stationary phase for capillary gas chromatographic (GC) separations. The PCL-PEG-PCL capillary column fabricated by static coating provides a high col...
Paclitaxel (PTX), etoposide (ETP), and rapamycin (RAPA) have different mechanisms, allowing multiple pathways to be targeted simultaneously, effectively treating various cancers. However, these drugs have a low hydrosolubility, limiting clinical appl...
Coaxial electrospun membranes made of polycaprolactone (PCL) and polyvinylalcohol (PVA) were produced and filled with a promising synthetic gold complex (AuM1) for antitumoral applications. Coaxial nanofibers characterized by a PVA shell and PCL + Au...
In this work, we aimed to improve the encapsulation efficiency of sepiapterin (SP), the natural precursor of the essential cofactor tetrahydrobiopterin (BH4) that displays mild water-solubility and a short biological half-life, within methoxy-poly(et...
Intranasal administration is a promising route for direct drug delivery to the brain; its combination with nanocarriers enhances delivery. We have previously shown that intranasal administration combined with PEG-PCL-Tat (a nanocarrier) efficiently d...
The blood-brain barrier is a substantial obstacle for delivering anticancer agents to brain tumors, and new strategies for bypassing it are sorely needed for brain tumor therapy. Intranasal delivery provides a practical, noninvasive method for delive...
Competition for nutrients and niches (CNN) is known to be one of the mechanisms for biocontrol mostly exhibited by Pseudomonas strains. Phenotypic and full genome analysis revealed Pseudomonas putida PCL1760 controlling tomato foot and root rot (TFRR...
The study intended to utilizing waste organic fiber for low-cost semi-flexible substrate fabrication to develop microstrip patch antennas for low band communication applications. All the semi-flexible substrates (12.2 wt. % OPEFF/87.8 wt. % PCL, 12.2...
When it comes to the disposal of paperboard and cardboard packaging waste to reduce their environmental impact, recycling is one of the most desirable options. With innovations and development of biopolymer coatings and their application in packaging...
The development of innovative wound dressings capable of accelerating diabetic wound healing while simultaneously reducing scar formation is a significant clinical challenge. In this study, we designed and fabricated a multifunctional nanofibrous sca...
Enamel demineralization around brackets is a relatively common complication of fixed orthodontic treatment, which seriously affects the aesthetics of teeth. In this study, a novel orthodontic adhesive containing polycaprolactone–gelatin–s...
Rapid antigen tests targeting SARS-CoV-2 nucleocapsid protein were essential for decentralised testing during the COVID-19 pandemic. Independent performance evaluations are essential to support regulatory approval and inform clinical implementation,...
Bromocriptine mesylate (BM), primarily ergocryptine, is a dopamine agonist derived from ergot alkaloids. This study aimed to formulate chitosan (CS)-coated poly ε-caprolactone nanoparticles (PCL NPs) loaded with BM for direct targeting to the...
To address the challenges posed by the narrow oxidation decomposition potential window and the characteristic of low ionic conductivity at room temperature of solid polymer electrolytes (SPEs), carbon dioxide (CO2), epichlorohydrin (PO), caprolactone...
Nanoparticles are used increasingly for the treatment of different disorders, including burn wounds of the skin, due to their important role in wound healing. In this study, acriflavine-loaded poly (ε-caprolactone) nanoparticles (ACR-PCL-NPs)...
In this study, composite nanofibers (SF/PCL/CS) for the application of dressings were prepared with silk fibroin (SF), polycaprolactone (PCL), and chitosan (CS) by electrospinning techniques, and the effect of the fiber diameter was investigated usin...
The lack of suitable functional groups for cell adhesion on the surface of Polycaprolactone (PCL) is one of the main limitations in order to use PCL for biomedical applications. The aim of this research is to modify the PCL film surface using arginin...
of 6