Search Results (497)

This paper aims to analyse the mechanisms of microscopic diffusion and adhesion at the interface between polymer-modified asphalt and aggregate at high blending ratios. Using molecular dynamics simulations, a model of the polymer-modified asphalt–aggregate interface was developed. The study systematically investigated the effects of three types of modifiers—SBS, SBR and PE—on the wetting, diffusion and adhesion behaviour at the asphalt interface within a content range of 2.5% to 10% and under various temperature conditions. The results indicate that an increase in modifier content inhibits the migration of light fractions towards the interface, leading to weakened interfacial diffusion and non-uniform wetting under high-temperature conditions. In contrast, the SBS and SBR systems are more sensitive to changes in temperature and modifier content, while the PE system exhibits a relatively weaker diffusion attenuation effect. The interfacial adhesion results further indicate that the adhesion energy between modified asphalt and aggregate is higher at low temperatures and is primarily governed by van der Waals forces; as the modifier content increases, interfacial adhesion at low temperatures is enhanced, but construction and coating performance at high temperatures are somewhat affected. This study elucidates the microstructural diffusion and adhesion mechanisms of high-content polymer-modified asphalt under cold-climate conditions, providing a theoretical basis for the selection of modified asphalt materials and the optimisation of mix designs in low-temperature regions. Full article

This article presents a multi-criteria comparative analysis of modern wall partitions in light-frame technology, with a focus on highly energy-efficient modular construction. The motivation for this research stems from the critical need to optimize building thermal insulation materials to minimize heat loss, while simultaneously ensuring low structural weight, rapid assembly, and hygrothermal safety in prefabricated systems. The aim of this study is to identify the most advantageous insulating materials and structural configurations by evaluating their thermal transmittance, moisture behavior, thermal dynamics, and fire resistance. The analysis encompassed four structural variants paired with seven types of advanced and conventional insulation materials. This comprehensive matrix allowed for the development of 28 computational models. Simulations were carried out for severe winter climatic conditions in Poland, utilizing the Ubakus software and conforming to the PN-EN ISO 13788, PN-EN ISO 6946, PN-EN 12524, and DIN 4108-3 standards. The simulations assumed strict steady-state boundary conditions for a 90-day condensation period, with an external profile of −14 °C/80% RH and an internal climate of 20 °C/50% RH. The evaluation focused on key physical and energy parameters, including the heat transfer coefficient (U-value), condensation risk, diffusion resistance, thermal phase shift, and partition weight. Quantitative findings reveal that the ventilated system with resol foam insulation (variant 4d) yielded the best overall performance, achieving a U-value of 0.089 W/(m²·K) W/(m²·K). The results confirm that the strategic selection of high-performance thermal insulation materials, coupled with structural thermal bridge mitigation, significantly enhances the energy efficiency, thermal stability, and moisture resistance of lightweight enclosures, establishing a comprehensive comparative framework for optimizing modular building envelopes. Full article

Perception-oriented evaluation of automotive headlamps still relies mainly on human-vision photometric criteria, although forward-facing cameras are increasingly safety-critical sensing elements for night driving. This paper benchmarks 16 measured production headlamp light distributions with a simulation chain that combines headlamp spectra and beam patterns, diffuse scene reflection, an imaging-transfer model, and an EMVA-based camera model. The quantitative chain maps scene radiance to sensor-domain signal-to-noise ratio, derives task-specific required signal-to-noise curves from a six-network object-recognition ensemble, and aggregates local threshold satisfaction as region-of-interest coverage across three target reflectances and five driving speeds using WLTP moving-time weights. For the baseline RGB camera, WLTP-weighted coverage ranges from 18.95% to 53.48% across the evaluated light distributions, corresponding to a factor of 2.82 between the weakest and strongest distribution. The camera-parameter sweeps show that favorable beam placement can deliver comparable benchmark coverage with roughly 60% smaller pixel pitch than the weakest distribution, corresponding to an 84% reduction in pixel area, or at materially shorter exposure times. The WLTP-weighted coverage score correlates positively with the established Headlamp Safety Performance Rating, with Pearson $r=0.68$ for the RGB configuration, indicating partial alignment between human-centric and camera-centric illumination needs while confirming that the metrics are not interchangeable. The results identify headlamp light distribution as a primary design parameter for nighttime camera perception and provide a quantitative basis for co-design of automotive lighting and camera-based systems. Full article

The development of durable and practical polymer-supported photocatalytic materials that are suitable for use in continuous-flow systems has become an increasingly pressing issue in the field of water treatment. In this study, FeTiO₃/BiOCl heterojunction structures were synthesized at different ratios and integrated into a poly(vinylidene fluoride) (PVDF) matrix to develop photocatalytic thin-film systems. The resulting materials were characterized by Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and UV–visible diffuse reflectance spectroscopy (UV-DRS) analyses. In photocatalytic experiments conducted under visible light, a 66.3% removal of doxycycline was achieved for pristine FeTiO₃ within 180 min, whilst the FTO@BiOCl(III) composite reached 74.4%. In the PVDF-based thin-film system, the film catalyst demonstrated a removal efficiency of 68.9%. When the pH effect was investigated, the highest total removal of 90.3% was achieved under pH 6.0 conditions. Radical scavenging experiments revealed that superoxide radicals were the predominant active species (a decrease to 30.5% in the presence of benzoquinone (BQ). In experiments conducted in the air-lift reactor system, the P-FTO@BiOCl(III) film achieved approximately 65% removal after 9 h and maintained its structural stability. The PVDF-supported FeTiO₃/BiOCl heterojunction thin-film system offers a noteworthy alternative for environmental applications due to its suitability for continuous systems, structural stability and effective photocatalytic performance. Full article

To improve the visible-light response and antibacterial performance of titanium dioxide, a TiO₂/GO/CdS mesoporous nanocomposite was prepared via an ultrasound-assisted sol–gel method in this study. Systematic characterizations including XRD, XPS, SEM, TEM, BET, UV-Vis DRS and FTIR were carried out to analyze the structure, morphology and optical properties of the material. The results show that the composite exhibits a typical mesoporous structure with a specific surface area of 197.0962 m²/g and a pore size distribution of 2–14 nm. CdS is successfully doped into the TiO₂ matrix and forms a heterostructure with GO. UV-Vis diffuse reflectance spectra indicate that the synergistic effect of CdS and GO significantly broadens the visible-light absorption range of TiO₂ and suppresses the recombination of photogenerated carriers. Antibacterial tests using Escherichia coli as the target strain demonstrate that the TiO₂/GO/CdS composite exhibits remarkably better visible-light photocatalytic bactericidal activity than pure TiO₂ and the TiO₂/GO composite. This work provides a new strategy for the modification of TiO₂-based photocatalytic antibacterial materials, and the as-prepared composite shows promising application prospects in the antibacterial field. Full article

Ternary heterojunction photocatalysts enhance the separation and transport of photogenerated charge carriers, thereby boosting their redox activity for use in environmental and sustainable energy applications. This study focuses on the synthesis of a TiO₂/Bi₂O₃/g-C₃N₄ heterojunction composite via a ceramic method with TiO₂ loadings of 80%, 85%, and 90% (denoted 80T-BC, 85T-BC, and 90T-BC, respectively) to investigate structure–property–performance relationships in photocatalytic dye degradation. The structural, optical, and morphological properties of the synthesised materials were characterised using X-ray diffraction (XRD), scanning electron microscopy (SEM), and diffuse reflectance UV–Vis spectroscopy (DRS). The photocatalytic performance was evaluated by measuring the degradation of Rhodamine B under visible light irradiation. Under optimised conditions (pH 6, initial RhB concentration of 5 mg/L, and a reaction time of 120 min), a degradation rate of 99% was achieved. Furthermore, the semiconductor demonstrated significant antibacterial activity against both Gram-negative (Pseudomonas aeruginosa) and Gram-positive (Staphylococcus aureus) bacteria. This study presents a promising strategy for modifying TiO₂-based semiconductors by incorporating different metal oxides. The formation of the resulting heterojunction significantly enhances photocatalytic efficiency, demonstrating strong potential for practical environmental remediation. Full article

Vacancy-ordered double-perovskite Cs₂SnI₆ is known to be a good candidate for perovskite photovoltaics, as it is a light harvesting material which has potential both as an individual compound and as a component of a composite material. The compound is interesting due to being free of atom sites in B cationic positions, making the lattice “breathable” and giving it optoelectronic characteristics that vary with dopants. Here, antimony was examined as a possible heterovalent dopant with an ionic radius larger than that of Sn⁴⁺. In practice, it has been found that most of the materials are composites of Cs₂SnI₆ and Cs₃Sb₂I₉ phases. In the CsI–SnI₄–SbI₃ phase triangle, the melt crystallization process produced a layered (111)-oriented microstructure of crystallites with an increasing percentage of antimony. Two-dimensional perovskite materials look more promising in the decomposition of a solid solution to Cs₂SnI₆ and Cs₃Sb₂I₉ phases than in heterophase nucleation. The observed effect of (111)-oriented growth could be translated to other inorganic halides to form new oriented films or single crystals of perovskite materials. Diffuse reflectance spectroscopy showed an additional absorption shoulder in the NIR region for all groups of compounds, most likely induced by point defects in I sublattices of Cs₂SnI₆. Expanding the Cs₂SnI₆ absorption range to the NIR region could lead to new perspectives for its application. Full article

Graphitic carbon nitride (CN) is a promising photocatalytic material, but its practical application is limited by small specific surface area, narrow light absorption range, and high photogenerated carrier recombination rate. To address these issues, this study synthesized boron-doped carbon nitride (BCN) and sulfuric acid-exfoliated boron-doped carbon nitride (BCND). X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) results confirmed that boron was successfully doped into the CN skeleton via B-N bonds. Scanning electron microscopy (SEM) and N₂ adsorption–desorption (BET) characterizations showed that acid exfoliation significantly increased the specific surface area of BCND to 68.80 m²·g⁻¹, much higher than that of CN (9.54 m²·g⁻¹) and BCN (15.98 m²·g⁻¹). UV–visible diffuse reflectance spectroscopy (UV-Vis DRS) analysis revealed that BCND had the narrowest bandgap (2.59 eV) among the three materials, which enhanced its visible-light absorption efficiency. Photoelectrochemical tests demonstrated that BCND exhibited the smallest charge transfer resistance and the highest transient photocurrent density (eight times that of CN), indicating efficient separation of photogenerated electron–hole pairs. Photocatalytic water splitting experiments showed that BCND achieved the highest Hydrogen production rate of 792.34 μmol·g⁻¹·h⁻¹, which was about 4 times that of CN (158.41 μmol·g⁻¹·h⁻¹) and 1.36 times that of 2.5% BCN (584.30 μmol·g⁻¹·h⁻¹). Free-radical trapping experiments indicated that hydroxyl radicals (·OH) played a crucial promotional role in Hydrogen production, while superoxide anions (·O₂⁻) exerted an inhibitory effect. The enhanced performance of BCND was attributed to the synergistic effects of boron doping (narrowing bandgap) and acid exfoliation (increasing specific surface area). A possible photocatalytic Hydrogen production mechanism was proposed based on the experimental results. This study provides a feasible strategy for the structural modification and performance optimization of g-C₃N₄-based photocatalysts for water splitting. Full article

Licania tomentosa leaf extract was used to synthesize zinc oxide nanoparticles (ZnO NPs) which were systematically analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-Visible (UV-Vis) and Fourier transform infrared (FT-IR) spectroscopies and energy-dispersion X-ray spectroscopy (EDS) methods. Based on XRD scans, the green NPs have an average crystallite size of 15.9 nm as estimated using the Scherrer equation and have a roughly spherical shape with an average diameter of 25.15 ± 1.2 nm as calculated from SEM data. As estimated from the Tauc plot based on UV-Vis absorption spectra, ZnO NPs have a small band gap of 3.0 eV. The biosynthesized ZnO NPs were effectively utilized for the photodegradation of methylene blue (MB) and crystal violet (CV) dyes under UV illumination with resulting MB and CV degradation efficiencies of ~94% and ~81% after 60 min and 70 min, with pH = 12 and pH = 10, respectively. Different experimental parameters such as NPs quantity, experimental pH, light intensity and initial concentration of dyes were varied to test the performance of the catalyst. Furthermore, efficient recycling of the catalyst was demonstrated. We also undertook antimicrobial studies of the green ZnO NPs. The ZnO NPs demonstrated broad-spectrum antimicrobial efficacy against Escherichia coli ATCC 35218, Enterococcus faecalis ATCC 29737, Klebsiella pneumoniae ATCC 700603, Pseudomonas aeruginosa ATCC 27853, P. aeruginosa B3, Staphylococcus aureus ATCC 29213, and S. aureus SA01, with the minimum inhibitory concentration (MIC) and the inhibitory concentrations associated with 50% effect (IC50) values ranging from 250 to 2000 µg/mL and 7.74 to 283.14 µg/mL, respectively. The nanoparticles also significantly inhibited biofilm formation by E. faecalis ATCC 29737, P. aeruginosa ATCC 27856, and S. aureus SA03. The antimicrobial efficiency of the ZnO NPs against Escherichia coli ATCC 25922 and Staphylococcus aureus SA03 isolates was also assessed using the disk diffusion assays. Taken together, our results reveal that the biosynthesized ZnO NPs are promising multifunctional materials with potential applications in antimicrobial treatments, biofilm control, and photocatalytic remediation. Full article

Light-responsive hydrogel-based oscillators typically exhibit small oscillation amplitudes because solvent diffusion is intrinsically slow, and their dependence on external periodic light modulation further results in limited amplitude, poor stability, and insufficient autonomy. Inspired by the trigger and sliding mechanism of the ancient crossbow, this study introduces an innovative system that integrates a sliding-block mechanism with time-delay feedback, breaking from conventional approaches that rely on hydrogel inertia or external modulation, within a purely theoretical and simulation-based framework. By establishing a nonlinear dynamic model coupling solvent diffusion, photoisomerization, and optical attenuation, this research shows through numerical simulations that the system can exhibit two distinct modes under constant illumination: a stable state and a self-sustained oscillatory state. The model predicts that the oscillation frequency can be flexibly tuned by varying key parameters, including the crosslinking density, Flory–Huggins interaction parameters of the spiropyran and hydrophilic polymer, ring-opening reaction rate, light intensity, fraction of light-sensitive molecules, and sliding displacement, whereas the initial absorption coefficient has only a minor influence. The slider displacement is also identified as an effective means to regulate the oscillation amplitude. Furthermore, the expansion force at the container bottom is predicted to oscillate synchronously with the hydrogel’s volume change. This theoretical framework represents a paradigm shift from “static small deformation” to “dynamic large-amplitude oscillation”, significantly enhancing the mechanical responsiveness of the material. This work provides a novel and controllable strategy for the conceptual design of autonomous light-driven micromechanical systems. Full article

Objective: Primary extranodal lymphomas of the head and neck region are relatively rare and represent a biologically distinct subset. The diagnosis and differential diagnosis of head and neck lymphomas are important and deserve special attention. The aim of the present study was to retrospectively evaluate patients diagnosed with primary head and neck lymphomas at the Department of Pathology between January 2020 and January 2026. Histopathological subtypes, localization, relative frequencies, and overall survival were analyzed. Materials and Methods: This retrospective study included 31 cases diagnosed with lymphoma involving the head and neck region. Medical records were reviewed. Histopathological slides were re-evaluated under light microscopy by experienced pathologists. All cases were classified according to the current World Health Organization (WHO) classification of tumors of hematopoietic and lymphoid tissues. An extensive immunohistochemical panel was applied. Statistical analysis was performed using SPSS statistical software (version 27.0; IBM Corp., Armonk, NY, USA). Results: The study group included 31 patients with head and neck lymphoma. The most common histological type was diffuse large B-cell lymphoma (DLBCL) (54.8%). Other histological subtypes included follicular lymphoma (FL), mantle cell lymphoma (MCL), extranodal NK/T-cell lymphoma (NKTCL), anaplastic large cell lymphoma (ALCL), and Hodgkin lymphoma (HL). The most common location was the tonsil (38.7%). Other locations included the nasopharynx, oral cavity, nasal cavity, salivary glands, and thyroid. Epstein–Barr virus (EBV) positivity was detected in two patients (6.5%), and human immunodeficiency virus (HIV) infection was identified in two patients (6.5%). At the time of the last follow-up, 27 patients (87.1%) were alive, whereas four patients (12.9%) had died. The mortality rate was 12.9%. The median overall survival was 28 months (95% CI: 10–45). Conclusions: Malignant lymphoma should be considered when evaluating head and neck masses, and histopathological assessment of the affected tissue remains the cornerstone of diagnosis. Full article

Dark current represents a fundamental limiting factor in photodiode performance, establishing the noise floor and constraining detectivity in low-light applications. This comprehensive literature review examines publications covering the physical mechanisms underlying dark current generation and diverse techniques employed for its reduction. Covered mechanisms include diffusion current, Shockley–Read–Hall (SRH) generation–recombination, trap-assisted tunneling, band-to-band tunneling, and surface leakage, each examined with respect to its physical origin and characteristic signatures. Reduction strategies are categorized into thermal management approaches, surface passivation techniques including atomic-layer-deposited aluminum oxide (ALD Al₂O₃), guard ring architectures (attached, floating, and combined configurations), gettering and defect engineering methods, doping profile optimization, bias voltage management, and advanced device architectures such as pinned photodiodes and black silicon structures. A classification table organizes all the reviewed literature by material system, reduction technique, and key findings. Special emphasis is placed on silicon, germanium, III–V compounds, and emerging material photodiodes relevant to near-infrared detection, CMOS imaging, single-photon avalanche diodes (SPADs), and Time-of-Flight (ToF) applications. Full article

In this work, the impact of hydrogen plasma treatment on the electrical and electronic quality of multicrystalline silicon (mc-Si) was systematically investigated using plasma-enhanced chemical vapor deposition (PE-CVD). Hydrogen radicals generated in the plasma effectively passivate dangling bonds, reducing electrically active defects and enhancing material quality. Optimized PE-CVD conditions were applied to promote efficient hydrogen incorporation and surface modification. Optical characterization, including reflectivity measurements and FT-IR spectroscopy, confirms the formation of Si–H bonds and a significant reduction in surface reflectivity of up to 66% at 600 nm. Electrical and optoelectronic analyses reveal pronounced improvements in carrier lifetime and diffusion length, increased by 200% and 79%, respectively. In addition, dark current–voltage (I–V) measurements show a 32% decrease in series resistance and a 51% increase in shunt resistance, indicating enhanced charge transport and suppressed leakage currents. These macroscopic electrical improvements are supported by light beam-induced current (LBIC) measurements, which demonstrate a 14% increase in grain boundary current, confirming effective hydrogen passivation and reduced recombination. Overall, hydrogen plasma PE-CVD treatment is shown to significantly improve the electronic quality and photovoltaic performance of mc-Si solar cells. Full article

Organic dye-, pharmaceutical-, and heavy metal-contaminated water are emerging environmental issues, and thus there is a requirement for the development of efficient and sustainable purification methods. Semiconductor (SmC) material-based photocatalysis using TiO₂ and Fe₂O₃ nanostructures is considered a promising field for pollutant degradation due to its chemical stability, nontoxicity, and ability to perform photocatalytic degradation using light irradiation. Understanding the thermal, optical, and charge transport properties governing their photocatalytic activity requires advanced characterisation methods. In this context, photothermal (PT) techniques provide powerful tools for probing non-radiative processes and energy transport in photocatalytic materials. The photocatalytic activity of these materials strongly depends on their structural, optical, thermal, and electronic properties. These properties can be enhanced through several modification strategies, including metal and non-metal doping (e.g., C, N, Cu, Ag, Au), surface modification, forming a complex with SiO₂, and the formation of Fe₂O₃–TiO₂ heterostructure nanocomposites. In this review, a comprehensive overview is provided of TiO₂ and Fe₂O₃-based nanocomposites with a specific focus on characterisation techniques for photothermal characterisation techniques, including thermal lens spectroscopy (TLS), beam deflection spectrometry (BDS), and photoacoustic spectroscopy (PAS), for determining thermal diffusivity, thermal conductivity, bandgap energy, carrier lifetime, surface roughness, porosity, etc., which are related to photocatalytic activity. The properties of these nanocomposites are correlated with photocatalytic activity for pollutant degradation using these nanocomposites. The challenges faced while using these nanocomposites for pollutant degradation are also discussed, along with future prospects for designing efficient photocatalysts for water purification applications. Full article

In this study, the in situ solvothermal synthesis of a copper-based metal–organic framework (Cu-BTC MOF) into two porous ceramic substrates with a 10 cm diameter and 2 cm thickness was reported. X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, diffuse reflectance spectroscopy (DRS), Tauc plot analysis, optical microscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were the techniques that were utilized to verify the formation and incorporation of the MOF into ceramics (two samples, with different SiO₂ particles; 500 µm (Ceramic 1), and 150 µm (Ceramic 2)). The synthesized Cu-MOF exhibited a crystalline structure. Both the composites and the Cu-MOF exhibited visible-light absorption, with optical band gaps of 2.5 eV and 2.4 eV, respectively, as determined by DRS. TEM images demonstrated that crystalline MOF domains were successfully included inside the ceramics. Methyl orange (MO), Congo red (CR), and methylene blue (MB) were used to assess the composites’ ability to remove dyes. Catalytic hydrogenation, powered by in situ hydrogen production from NaBH₄ hydrolysis, demonstrated high removal efficiencies of 91–97% after 60 min. Adsorption, on the other hand, was ineffective. Despite undergoing four consecutive cycles without performance degradation, the materials demonstrated remarkable recyclability. Cu-MOF@ceramic composites are effective, durable, and practically applicable for improved wastewater treatment. Full article