- Article
The Cramer–Rao–Frechet inequality is reviewed and extended to track fitting. A diffused opinion attributes to this inequality the limitation of the resolution of the track fits with the number N of observations. It will be shown that this...
The Cramer–Rao–Frechet inequality is reviewed and extended to track fitting. A diffused opinion attributes to this inequality the limitation of the resolution of the track fits with the number N of observations. It will be shown that this...
Models based on a power law are prevalent in many areas of study. When regression analysis is performed on data sets modeled by a power law, the traditional model uses a lead coefficient. However, the proposed model replaces the lead coefficient with...
The limit state function is important for the assessment of the longitudinal strength of damaged ships under combined bending moments in severe waves. As the limit state function cannot be obtained directly, the common approach is to calculate the re...
Geometric iterative methods, including progressive iterative approximation and geometric interpolation methods, are efficient for fitting a given data set. With the development of big data technology, the number of fitting data points has become mass...
High-precision, high-reliability, and high-density GPS crustal velocity are extremely important requirements for geodynamic analysis. The least-squares collocation algorithm (LSC) has unique advantages over crustal movement models to overcome observa...
In this contribution the fitting of a straight line to 3D point data is considered, with Cartesian coordinates
Modeling cyclic plasticity remains challenging due to the high computational cost of nonlinear constitutive models and the large number of parameters requiring evaluation, which are often temperature-dependent. This work presents a systematic procedu...
The Length of Day (LOD) and the Universal Time (UT1) play crucial roles in satellite positioning, deep space exploration, and related fields. The primary method for predicting LOD and UT1 is least squares fitting combined with autoregressive (AR) mod...
The wafer pre-aligner is a crucial component in the lithography process to correct the wafer center and notch orientation. To improve the precision and the efficiency of pre-alignment, a new method to calibrate the center and the orientation of a waf...
A standard criterium in statistics is to define an optimal estimator as the one with the minimum variance. Thus, the optimality is proved with inequality among variances of competing estimators. The demonstrations of inequalities among estimators are...
This study proposes an automated method for estimating the uncertain parameters of the solidification model in response to the inefficient and time-consuming problem of manually estimating multiple uncertain parameters of the solidification model. Th...
To address the inefficiencies and limited spatial resolution of traditional single-point monitoring techniques, this study proposes a multi-scale analysis method that integrates the Multi-Scale Model-to-Model Cloud Comparison (M3C2) algorithm with le...
We examine energetic electron distributions in the region of the diffuse aurora using a two-dimensional bi-Maxwellian model, applied to electron flux data at a single geomagnetic equator (L = 6.5). Electron flux is analyzed as a function of energy an...
In this paper a stochastic resonance (SR)-based method for recovering weak impulsive signals is developed for quantitative diagnosis of faults in rotating machinery. It was shown in theory that weak impulsive signals follow the mechanism of SR, but t...
Temporally-spatially modulated Fourier transform imaging spectrometers (TSMFTISs) provide high-throughout-type push-broom spectrometry with both temporal and spatial modulation features. The system requires strict registration between the detector an...
The transverse beam size is a key parameter for characterizing the performance of synchrotron radiation sources. Accurate measurement of the transverse beam size is crucial for assessing beam quality. In this study, a fiber array-photomultiplier tube...
(1) Background: This paper will present an elaboration of the risk assessment methodology by Deutsche Gesellschaft für Internationale Zusammenarbeit GmbH (GIZ), Eurac Research and United Nations University Institute for Environment and Human Sec...
The surface quality and profile accuracy of a radar fiberglass radome are determined by the manufacturing of the fiber-reinforced-plastic (FRP) complex curved mold. The surface quality, thickness uniformity, and shape accuracy of the mold seriously a...
A ship experiences the random motion of sea waves during its travels. Hence, the coarse alignment of the marine strapdown Inertial Navigation System (INS) suffers from rocking disturbances such as pitch and roll. In this paper, a novel approach of ma...
This paper proposes new sets of suitable broadcast ephemeris parameters for geosynchronous (GEO) and inclined geosynchronous (IGSO) navigation satellites (NSs). Despite the increasing number of GEO and IGSO NSs, global positioning system (GPS)-type e...
For T2 mapping, the underlying mono-exponential signal decay is traditionally quantified by non-linear Least-Squares Estimation (LSE) curve fitting, which is prone to outliers and computationally expensive. This study aimed to validate a fully connec...
In the contemporary era, where digital audio-visual media continues to evolve, the media landscape is increasingly converging with the urban landscape. This trend has made the importance of urban waterfront areas in city landscapes more pronounced. T...
The southern Apuan Alps (Italy) are prone to rainfall-induced landslides. A first attempt to calculate rainfall thresholds was made in 2006 using non-statistical and repeatable methods for the 1975–2002 period. This research aims to update, val...
Power curtailment methods contribute to the frequency stability of power systems with a high share of photovoltaic generation. This paper focuses on an online strategy that estimates the output characteristic of a photovoltaic generator while operati...
Reliable estimation of the air change rate from CO2 decay measurements is essential for ventilation assessment, but results may strongly depend on the assumed background concentration and the selected analysis window. This study compares the ISO 1256...
This paper presents a novel framework to extract metro tunnel cross sections (profiles) from Terrestrial Laser Scanning point clouds. The entire framework consists of two steps: tunnel central axis extraction and cross section determination. In tunne...
This study proposes a non-contact engine speed measurement system using vehicle electrical characterization to address the limitations of traditional contact-type methods and optical methods. The developed system collects coupled AC signals through a...
Traditional field surveys are expensive, time-consuming, laborious, and difficult to perform, especially in mountainous and dense forests, which imposes a burden on forest management personnel and researchers. This study focuses on predicting forest...
Phosphate sorption data are often analyzed by least-squares fitting to the two- or three-parameter Freundlich model. The standard methods are flawed by (1) treating the measured pseudo-equilibrium concentration C as the independent (hence error-free)...
The classical curve-fitting problem to relate two variables, x and y, deals with polynomials. Generally, this problem is solved by the least squares method (LS), where the minimization function considers the vertical errors from the data points to th...
Ellipsoid or geometric anisotropy is a widely used method in geostatistical analysis to obtain variograms with different ranges in different directions (azimuth) and relatively similar sill variance. Ellipsoid anisotropy is indispensable in mining wh...
Further processing and the added value of potatoes are limited by irregular potatoes. An ellipse-fitting-based Hausdorff distance and intersection over union (IoU) method for identifying irregular potatoes is proposed to solve the problem. First, the...
The traditional measurement method (e.g., field survey) of tree diameter circumference often has high labor costs and is time-consuming. Mobile laser scanning (MLS) is a powerful tool for measuring forest diameter at breast height (DBH). However, the...
In high-voltage (HV) transmission and distribution systems, HV apparatuses are subjected to electrical, thermal, and mechanical stresses that deteriorate the insulation performance. The polarization and depolarization current (PDC) measurement is an...
Fluorescence background is a persistent limitation in quantitative Raman spectroscopy of biological tissue, and it is pronounced in the pregnant cervix, where weak Raman bands sit on a strong and variable baseline. Baseline correction is a routine st...
Optical metrology has experienced a fast development in recent years—cross laser-pattern has become a common cooperative measuring marker in optical metrology equipment, such as infrared imaging equipment or visual 3D measurement system. The rapid an...
Wavelength scanning interferometry is an interferometric technique for measuring surface topography without the well-known 2π phase ambiguity limitation. The measurement accuracy and resolution of this technique depends, among other factors, on th...
Sea level monitoring is of great significance to the life safety and daily production activities of coastal residents. In recent years, GNSS interferometric reflectometry (GNSS-IR) has gradually developed into a powerful complementary technique for s...
This paper proposes a novel pupil and glint detection method for gaze tracking system using a wearable camera sensor and near-infrared LED array. A novel circular ring rays location (CRRL) method is proposed for pupil boundary points detection. First...
The Measurement-While-Drilling (MWD) system, composed of a tri-axial magnetometer and a tri-axial accelerometer, is widely used in the Horizontal Directional Drilling machine in coal mines. This system can provide attitude information of each measuri...
The detailed structure information under the forest canopy is important for forestry surveying. As a high-precision environmental sensing and measurement method, terrestrial laser scanning (TLS) is widely used in high-precision forestry surveying. In...
The Electronic Manufacturing Service (EMS) industry contributes significantly to toxic waste generation due to its fabrication processes. Notably, adherence to the Restriction of Hazardous Substances (RoHS) Directive varies amongst EMS providers, des...
Modeling complex conditions involving extensive engineering structures with large numbers of beams and columns often requires a mixture of analytical modeling based on beam theory and numerical simulations involving finite element models composed of...
The purpose of the study is to explore the antecedents of university students’ fitness application usage behaviours by combining the theory of planned behaviour and the technology acceptance model. An anonymous questionnaire survey was adopted to add...
15 January 2021
In this paper, we consider controlling coronavirus disease 2019 (COVID-19) outbreaks with financial incentives. We use the recently developed susceptible-unidentified infected-confirmed (SUC) epidemic model. The unidentified infected population is de...
This paper deals with transformations from electrocardiographic (ECG) to vectorcardiographic (VCG) leads. VCG provides better sensitivity, for example for the detection of myocardial infarction, ischemia, and hypertrophy. However, in clinical practic...
Based on charge-discharge cycle tests for commercial nickel-metal hydride (Ni-MH) batteries, a nonlinear relationship is found between the discharging capacity (Cdischarge, Ah) and the voltage changes in 1 s occurring at the start of the charging pro...
An image analysis procedure based on a two dimensional Gaussian fitting is presented and applied to satellite maps describing the surface urban heat island (SUHI). The application of this fitting technique allows us to parameterize the SUHI pattern i...
In a high accuracy strapdown inertial navigation system (SINS), the ring laser gyroscope’s (RLG) bias changes and the performance decreases due to factors in the RLG’s self-heating and changes in ambient temperature. Therefore, it is impo...
Recognition and localization of fruits are key components to achieve automated fruit picking. However, current neural-network-based fruit recognition algorithms have disadvantages such as high complexity. Traditional stereo matching algorithms also h...
of 32