Skip to Content

100 Results Found

  • Article
  • Open Access
9 Citations
2,090 Views
25 Pages

20 March 2024

Shale is a common rock type that is associated with underground engineering projects, and several important factors, such as bedding structure, confining pressure, and the loading and unloading path, significantly influence the anisotropy of shale. T...

  • Proceeding Paper
  • Open Access
3 Citations
2,239 Views
7 Pages

Acoustic Emission Health Monitoring of Historical Masonry to Evaluate Structural Integrity under Incremental Cyclic Loading

  • Georgios Livitsanos,
  • Naveen Shetty,
  • Els Verstrynge,
  • Martine Wevers and ,
  • Danny Van Hemelrijck and
  • Dimitrios G. Aggelis
  • + 1 author+ 0 author

Historical masonry structures during the decades, were composed with a variety of brick and mortar types according to materials availability of each region and the desirable mechanical properties in each specific case. Different composition of mortar...

(This article belongs to the Proceedings of The 18th International Conference on Experimental Mechanics)
  • Article
  • Open Access
3 Citations
3,041 Views
14 Pages

13 October 2021

Incremental techniques are always required for clinical cases of deep and/or large cavities restored with resin composite materials. The purpose of this study was to examine the bonding states of class 2 direct resin composite restoration applied by...

  • Article
  • Open Access
23 Citations
3,199 Views
15 Pages

9 November 2021

For many rock engineering projects, the stress of surrounding rocks is constantly increasing and decreasing during excavating progress and the long-term operation stage. Herein, the triaxial creep behavior of dolomitic limestone subjected to cyclic i...

(This article belongs to the Special Issue Advances in Rock Mechanics and Geotechnical Engineering)
  • Article
  • Open Access
677 Views
19 Pages

Multi-Feature Incremental Scheduling for TSN Cyclic Queuing and Forwarding via a Triple-Mode Cooperative Optimizer

  • Jianning Zhan,
  • Hangu Zhang,
  • Changsheng Chen,
  • Wentao Zhang and ,
  • Chao Fan,
  • Xu Han and
  • Shizhuang Deng
  • + 2 authors+ 0 author

Time-Sensitive Networking (TSN) with Cyclic Queuing and Forwarding (CQF) is a critical mechanism for ensuring deterministic forwarding. However, existing incremental schedulers typically rely on single-dimensional heuristics, which fail to address th...

(This article belongs to the Section Networks)
  • Feature Paper
  • Article
  • Open Access
9 Citations
4,247 Views
18 Pages

29 June 2022

Fused silica is an important optical material with important applications, where the surface must be precisely machined without subsurface damage. In this study, multi-cyclic indentations under incremental loads were performed on fused silica using t...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
2 Citations
2,314 Views
18 Pages

Effect of Cyclic Loading Treatment on the Compression Energy and Creep Properties of Machine-Harvested Seed Cotton

  • Ximei Wei,
  • Meng Wang,
  • Hongwen Zhang,
  • Lei Wang and ,
  • Xintian Du,
  • Lixin Chen and
  • Shaohua Zhi
  • + 2 authors+ 0 author

Machine-harvested seed cotton was taken as the research object to further clarify its creep performance, minimize its power consumption during the loading process, and obtain a better loading method. The uniaxial compression creep test was carried ou...

(This article belongs to the Section Agricultural Technology)
  • Article
  • Open Access
3 Citations
2,462 Views
15 Pages

12 December 2023

The leak-before-break design concept is based on J-R curves, which are obtained by J-R tests on various types of specimens and are known to be dependent on the cyclic load history. The J-R curves of standard specimens suggested by the American Societ...

(This article belongs to the Section Structural Integrity of Metals)
  • Article
  • Open Access
10 Citations
3,216 Views
16 Pages

Experimental Study on Strength and Liquefaction Characteristics of Sand under Dynamic Loading

  • Yongbo Cai,
  • Yanlu Zhang,
  • Qingjie Qi,
  • Ye Cheng and ,
  • Yongbo Shi and
  • Zuo Sun
  • + 1 author+ 0 author

29 June 2023

To investigate the influence of moisture content, density, and loading frequency on the dynamic strength and liquefaction characteristics of sandy soil, a series of vibration triaxial tests were designed and conducted. The tests were divided into inc...

(This article belongs to the Special Issue Sustainable Mining and Emergency Prevention and Control)
  • Article
  • Open Access
4 Citations
2,458 Views
22 Pages

Incremental Growth Analysis of a Cantilever Beam under Cyclic Thermal and Axial Loads

  • Ali Shahrjerdi,
  • Hamidreza Heydari,
  • Mehdi Bayat and
  • Mohammadmehdi Shahzamanian

16 September 2024

Ratcheting analysis for cantilever beams subjected to the thermomechanical loads is presented using the finite element method. The cantilever beam is constrained along the vertical direction, and plane stress conditions are assumed according to the b...

  • Article
  • Open Access
2 Citations
3,123 Views
14 Pages

18 January 2023

As a force-based finite element method (FEM), large increment method (LIM) shows unique advantages in material nonlinearity problems. In LIM for material nonlinearity analysis, adaptive load incremental step is a fundamental step for its successful a...

(This article belongs to the Special Issue Advanced Numerical Analysis and Scientific Computing)
  • Proceeding Paper
  • Open Access
1,884 Views
8 Pages

Experimental Protocol for Nonlinear Behavior Characterization of CFRP Materials under Dynamic Loadings

  • Jordan Berton,
  • Fabien Coussa,
  • Julien Berthe,
  • Eric Deletombe and
  • Mathias Brieu

This study presents an experimental protocol for the characterization of the strain rate effects on the nonlinear behavior of an organic matrix composite. This protocol is based on the development of a displacement interrupted tensile test device ada...

(This article belongs to the Proceedings of The 19th International Conference on Experimental Mechanics)
  • Article
  • Open Access
5 Citations
2,821 Views
20 Pages

24 June 2022

To accurately describe the deformation characteristics of clay under long-term cyclic load, based on fractional calculus theory, elastoplastic theory and the basic element model, a variable-order fractional dynamic model designed to predict accumulat...

(This article belongs to the Topic Dynamical Systems: Theory and Applications)
  • Article
  • Open Access
34 Citations
7,067 Views
18 Pages

Fatigue Lifetime of Ceramic Matrix Composites at Intermediate Temperature by Acoustic Emission

  • Elie Racle,
  • Nathalie Godin,
  • Pascal Reynaud and
  • Gilbert Fantozzi

16 June 2017

The fatigue behavior of a Ceramic Matrix Composite (CMC) at intermediate temperature under air is investigated. Because of the low density and the high tensile strength of CMC, they offer a good technical solution to design aeronautical structural co...

(This article belongs to the Special Issue The Life of Materials at High Temperatures)
  • Article
  • Open Access

Nonlinear Fatigue Mechanical Behavior and Damage Evolution of Salt Rock Under Stepwise Cyclic Loading: Insight from Strain-Driven Perspective

  • Tianyin Wu,
  • Huan Li,
  • Xiaomeng Sun,
  • Jiaxiang Chen and ,
  • Qiang Fu,
  • Haonan Xu,
  • Xincheng Cui,
  • Hongling Ma,
  • Wei Liang and
  • Liangliang Ye
  • + 5 authors+ 0 author
Appl. Sci.2026, 16(23), 11546;https://doi.org/10.3390/app162311546 
(registering DOI)

21 November 2026

Understanding the cyclic deformation and fatigue damage evolution of rock salt is critical for the long-term stability of compressed air energy storage (CAES) salt caverns. In this study, uniaxial stepwise cyclic loading–unloading tests were pe...

  • Review
  • Open Access
11 Citations
5,201 Views
24 Pages

Computational Methods for Lifetime Prediction of Metallic Components under High-Temperature Fatigue

  • Vitaliy Kindrachuk,
  • Bernard Fedelich,
  • Birgit Rehmer and
  • Frauke Peter

28 March 2019

The issue of service life prediction of hot metallic components subjected to cyclic loadings is addressed. Two classes of lifetime models are considered, namely, the incremental lifetime rules and the parametric models governed by the fracture mechan...

  • Article
  • Open Access
1 Citations
2,351 Views
19 Pages

29 December 2022

Subsoil support is generally ignored in the design of reinforced piled embankments, resulting in a very conservative design for settlement control. This design philosophy may lead to an unnecessary increase in construction costs, especially for emban...

  • Article
  • Open Access
8 Citations
3,327 Views
18 Pages

Tube Expansion by Single Point Incremental Forming: An Experimental and Numerical Investigation

  • Carlos Suntaxi,
  • Gabriel Centeno,
  • M. Beatriz Silva,
  • Carpóforo Vallellano and
  • Paulo A. F. Martins

17 September 2021

In this paper, we revisit the formability of tube expansion by single point incremental forming to account for the material strain hardening and the non-proportional loading paths that were not taken into consideration in a previously published analy...

(This article belongs to the Special Issue Tube and Sheet Metal Forming Processes and Applications)
  • Article
  • Open Access
614 Views
29 Pages

12 April 2026

This article compares the analytical results from two models, based on the theory of hereditary creep strain, with experimental results on the rheological properties of lightweight sintered aggregate concrete under cyclically varying loads. In a prev...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
85 Citations
7,890 Views
20 Pages

Influence of Groundwater Depth on Pile–Soil Mechanical Properties and Fractal Characteristics under Cyclic Loading

  • Bingxiang Yuan,
  • Zhijie Li,
  • Weijie Chen,
  • Jin Zhao and ,
  • Jianbing Lv,
  • Jie Song and
  • Xudong Cao
  • + 2 authors+ 0 author

The analysis of the behavior of soil and foundations when the piles in offshore areas are subjected to long-term lateral loading (wind) is one of the major problems associated with the smooth operation of superstructure. The strength of the pile-soil...

(This article belongs to the Special Issue Fractal and Fractional in Geomaterials)
  • Article
  • Open Access
11 Citations
4,638 Views
13 Pages

30 August 2019

This work presents a new isotropic model to describe the cyclic hardening/softening plasticity behavior of metals. The model requires three parameters to be evaluated experimentally. The physical behavior of each parameter is explained by sensitivity...

(This article belongs to the Special Issue Metal Plasticity and Fatigue at High Temperature)
  • Article
  • Open Access
908 Views
20 Pages

4 November 2025

The article presents an analysis of the outcomes for AA2519 aluminum alloy exposed to variable loads. The variable loads were implemented with a strain control program consisting of incremental steps and increasing/decreasing multiple steps. Tests we...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
13 Citations
8,205 Views
12 Pages

22 October 2019

This study presents an experimental investigation of the flexure behavior of exterior beam-column joints made from hybrid concrete (normal concrete (NC) and reactive powder concrete (RPC)) or hybrid reinforcement (steel and carbon fiber reinforced po...

(This article belongs to the Special Issue Application of Fiber Reinforced Polymers in Strengthening of Reinforced Concrete Structures)
  • Article
  • Open Access
2 Citations
802 Views
21 Pages

14 November 2025

This study examines the seepage and damage behavior of coal under cyclic loading and unloading, typical in multi-layer coal seam mining. Four stress paths were designed: isobaric, stepwise, incrementally increasing, and cross-cyclic, based on real-ti...

  • Article
  • Open Access
25 Citations
4,340 Views
17 Pages

Recycled Glass Blends with Recycled Concrete Aggregates in Sustainable Railway Geotechnics

  • Mahdi Naeini,
  • Alireza Mohammadinia,
  • Arul Arulrajah and
  • Suksun Horpibulsuk

25 February 2021

This research investigates the static and cyclic characteristics of recycled glass (RG) as a supplementary material with recycled concrete aggregate (RCA) in the rail track capping layer. RG was blended by-weight with RCA in 10% increments up to 50%...

(This article belongs to the Special Issue Sustainability and Innovation in Transport Infrastructure Geotechnics)
  • Technical Note
  • Open Access
883 Views
11 Pages

Electrical Resistivity as a Non-Destructive Technique for Fatigue Damage Detection in Aluminium Alloy 6082

  • Viththagan Vivekanandam,
  • Shubham Sanjay Joshi,
  • Ebad Bagherpour and
  • Zhongyun Fan

9 August 2026

Metals are widely used in various types of structural applications such as the automotive, aerospace and construction industries. However, their service life is limited due to the various loads they experience during operation. Specifically, cyclic l...

(This article belongs to the Special Issue NDT for Digital Transformation, Diagnostics, and Preservation)
  • Article
  • Open Access
4 Citations
2,840 Views
21 Pages

19 June 2023

Under strain control tests and cyclic loading, extruded magnesium alloys exhibit a special mechanism of plastic deformation (“twinning” and “de-twining”). As a result, magnesium alloys exhibit an asymmetric material behavior t...

(This article belongs to the Special Issue Crystal Plasticity (Volume III))
  • Article
  • Open Access
24 Citations
3,279 Views
24 Pages

Cyclically Loaded Copper Slag Admixed Reinforced Concrete Beams with Cement Partially Replaced with Fly Ash

  • Sumathy Raju,
  • Jagadheeswari Rathinam,
  • Brindha Dharmar,
  • Sasi Rekha and ,
  • Siva Avudaiappan,
  • Mugahed Amran,
  • Kseniia Iurevna Usanova,
  • Roman Fediuk,
  • Pablo Guindos and
  • Ramkumar Velayutham Ramamoorthy
  • + 5 authors+ 0 author

25 April 2022

Generally, the concrete with higher strength appears to produce brittle failure more easily. However, the use of mineral admixture can help in enhancing the ductility, energy dissipation, and seismic energy in the designed concrete. This paper presen...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
8 Citations
3,195 Views
17 Pages

19 November 2022

Damage to underground structures induced by soil liquefaction under cyclic loads such as earthquakes has long been an important issue in underground engineering practice. In this paper, five models are developed using Flac3D software to analyze the e...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
20 Citations
5,266 Views
19 Pages

Integrated Forming and Surface Engineering of Disc Springs by Inducing Residual Stresses by Incremental Sheet Forming

  • Ramin Hajavifard,
  • Fawad Maqbool,
  • Anke Schmiedt-Kalenborn,
  • Johannes Buhl and ,
  • Markus Bambach and
  • Frank Walther
  • + 1 author+ 0 author

20 May 2019

Disc springs are conical annular discs, which are characterized by a high spring force with a small spring travel and good space utilization. In operation, they must meet high demands on the stability of the spring characteristic and the fatigue stre...

  • Article
  • Open Access
2 Citations
1,810 Views
20 Pages

9 February 2024

Horizontal well cavern completion and stress release is considered a potential technique for efficient development of coalbed methane in tectonically deformed coal (TDC). Pulsating loading and unloading is a key technique for the controlled expansion...

(This article belongs to the Special Issue Exploration, Exploitation and Utilization of Coal and Gas Resources)
  • Article
  • Open Access
2 Citations
1,421 Views
26 Pages

28 January 2026

This study aims to elucidate the deterministic correlation between the microscopic fracture mechanisms and the multi-domain characteristics of acoustic emission in reinforced concrete beams under cyclic loading. Cyclic incremental tests were designed...

(This article belongs to the Topic Advances in Non-Destructive Testing Methods, 3rd Edition)
  • Article
  • Open Access
1 Citations
2,097 Views
16 Pages

5 September 2024

This work aims to reveal the effect of rock bridge length (RBL), i.e., 10, 20, 30, or 40 mm, on the fatigue mechanical responses and fracture evolution of marble samples containing stepped fissures under multilevel cyclic loading paths. Comprehensive...

(This article belongs to the Topic Advances in Understanding Rock Mass Structural-Dependent Cyclic and Fatigue Behaviors)
  • Article
  • Open Access
21 Citations
5,125 Views
29 Pages

New Metallic Damper with Multiphase Behavior for Seismic Protection of Structures

  • Amadeo Benavent-Climent,
  • David Escolano-Margarit,
  • Julio Arcos-Espada and
  • Hermes Ponce-Parra

20 January 2021

This paper proposes a new metallic damper based on the plastic deformation of mild steel. It is intended to function as an energy dissipation device in structures subjected to severe or extreme earthquakes. The damper possesses a gap mechanism that p...

(This article belongs to the Special Issue Advances in Structural Steel Research)
  • Article
  • Open Access
23 Citations
5,375 Views
17 Pages

In Situ Strain and Damage Monitoring of GFRP Laminates Incorporating Carbon Nanofibers under Tension

  • Yanlei Wang,
  • Yongshuai Wang,
  • Baoguo Han,
  • Baolin Wan and ,
  • Gaochuang Cai and
  • Ruijuan Chang
  • + 1 author+ 0 author

16 July 2018

In this study, conductive carbon nanofibers (CNFs) were dispersed into epoxy resin and then infused into glass fiber fabric to fabricate CNF/glass fiber-reinforced polymer (GFRP) laminates. The electrical resistance and strain of CNF/GFRP laminates w...

(This article belongs to the Special Issue Multi-functional Polymer Composites and Structures)
  • Article
  • Open Access
2,642 Views
13 Pages

Fatigue Crack Propagation under Christmas Tree Load Pattern

  • Diogo M. Neto,
  • Edmundo R. Sérgio,
  • Francisco Jesus,
  • James C. Newman and
  • Fernando V. Antunes

18 January 2023

Most mechanical components are subject to dynamic loads, which can cause failure in service. This study aims to evaluate the effect of variable amplitude loadings on fatigue crack growth (FCG) in CT specimens produced with the AA2024-T351 aluminum al...

(This article belongs to the Topic Fatigue and Fracture Assessment of Structural Components and Materials)
  • Article
  • Open Access
6 Citations
3,779 Views
14 Pages

13 December 2022

Under traffic loading, the soil elements in subgrade are subjected to a complex 3D stress path. To investigate the cyclic behavior of desert subgrade under initial shear stress conditions, the number of cyclic true triaxial tests were implemented on...

(This article belongs to the Special Issue Soil Dynamics and Earthquake Engineering in Sustainability)
  • Article
  • Open Access
1 Citations
462 Views
19 Pages

Stability Analysis of a Gravity Anchorage Foundation in Layered Argillaceous Sandstone Subjected to Dry–Wet Cycles and Cyclic Vehicle Loads

  • Yupeng Gu,
  • Xuanjun Wang,
  • Wei Chen,
  • Jingcheng Zheng and ,
  • Zhiqing Liu,
  • Minzhe Yu and
  • Xinyuan Liu
  • + 2 authors+ 0 author

29 June 2026

This study investigates the dynamic response and local stability of gravity-anchored foundations constructed in layered argillaceous sandstone under the coupled effects of wet–dry cycling degradation and cyclic vehicle loads. Based on in situ d...

  • Article
  • Open Access
10 Citations
3,197 Views
22 Pages

24 March 2021

In this paper, the stability of large-size graded crushed stone used for road base or cushioning under repeated load is investigated. Using an in-house developed device, large-size crushed stone mix was compacted and molded by the vibration and rotar...

(This article belongs to the Special Issue Experimental Testing and Constitutive Modelling of Pavement Materials)
  • Article
  • Open Access
8 Citations
4,307 Views
28 Pages

Convergence Check Phase-Field Scheme for Modelling of Brittle and Ductile Fractures

  • Tomislav Lesičar,
  • Tomislav Polančec and
  • Zdenko Tonković

30 June 2023

The paper proposes a novel staggered phase-field framework for modelling brittle and ductile fractures in monotonic and cyclic loading regimes. The algorithm consists of two mesh layers (displacement and phase field) and a single special-purpose, use...

  • Feature Paper
  • Article
  • Open Access
10 Citations
3,786 Views
18 Pages

Influence of Weld-Porosity Defects on Fatigue Strength of AH36 Butt Joints Used in Ship Structures

  • Vincenzo Crupi,
  • Gabriella Epasto,
  • Eugenio Guglielmino and
  • Alberto Marinò

8 March 2021

Experimental tests were carried out to assess the fatigue strength of four types of welded joints, made of AH36 steel and used for ship structures. The joints differ for the presence of weld defects and for the thickness value. Fatigue tests were car...

  • Article
  • Open Access
16 Citations
3,481 Views
19 Pages

Behaviour of Hybrid Fibre-Reinforced Ternary Blend Geopolymer Concrete Beam-Column Joints under Reverse Cyclic Loading

  • Veerappan Sathish Kumar,
  • Namasivayam Ganesan,
  • Pookattu Vattarambath Indira,
  • Gunasekaran Murali and
  • Nikolai Ivanovich Vatin

31 May 2022

Beam–column joints are extremely vulnerable to lateral and vertical loads in reinforced concrete (RC) structures. This insufficiency in joint performance can lead to the failure of the whole structure in the event of unforeseen seismic and wind...

(This article belongs to the Topic Innovative Construction and Building Materials)
  • Article
  • Open Access
1 Citations
767 Views
18 Pages

Physics-Constrained Identification and OpenSees Deployment of a Twelve-Parameter BWBN Model for RC Column Hysteresis

  • Bochen Wang,
  • Hongqian Lu,
  • Weiming Gong,
  • Zele Li and ,
  • Jiaqing Shu and
  • Xiaoqing Gu
  • + 1 author+ 0 author

18 March 2026

Accurate simulation of reinforced concrete (RC) members under cyclic loading requires hysteresis models that capture degradation and pinching, yet inverse identification of such models remains challenging because the internal-state evolution is stron...

(This article belongs to the Special Issue Seismic Performance of Steel and Composite Structures)
  • Article
  • Open Access
91 Citations
4,519 Views
20 Pages

Calcareous sand is a special marine soil rich in calcium carbonate minerals, characterized by brittle particles. It is, therefore, widely used as a filling material in the construction of islands and reefs. In this study, a series of cyclic tri-axial...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
8 Citations
4,640 Views
35 Pages

16 July 2023

Recently, buckling-restrained braces (BRBs) have been widely implemented as seismic load resistance systems in buildings to enhance their response against dynamic vibration. However, during catastrophic earthquakes, the steel core in BRB devices full...

(This article belongs to the Special Issue Sustainable Concretes: Latest Advances and Prospects)
  • Article
  • Open Access
23 Citations
5,449 Views
13 Pages

21 June 2019

Thermal Fatigue of flip chip component solder joints is widely existing in thermal energy systems, which imposes a great challenge to operational safety. In order to investigate the influential factors, this paper develops a model to analyze thermal...

(This article belongs to the Special Issue Modelling, Simulation and Control of Thermal Energy Systems)
  • Article
  • Open Access
278 Views
22 Pages

Analysis of Uniaxial Fatigue Mechanical Properties and Constitutive Modeling for Freeze–Thaw Cycled Red Sandstone with Double Fissures

  • Jianxi Ren,
  • Zhengtao Jiang,
  • Mufan Tan,
  • Mengchen Yun and ,
  • Kun Zhang,
  • Kechen Zhang and
  • Haojun Wang
  • + 2 authors+ 0 author

31 August 2026

This study addresses the challenge of the mechanical behavior of fractured rock masses in cold regions under freeze–thaw-fatigue coupling. Uniaxial step-incremental cyclic loading tests were conducted on double-cracked red sandstone subjected t...

  • Article
  • Open Access
1,052 Views
15 Pages

16 December 2025

Background/Objectives: This study investigates the effect of mild cyclic loads on the stress state of degenerative knee joint cartilages using a combination of experimental data and numerical modeling. Methods: A three-dimensional finite element mode...

(This article belongs to the Section Biomedical Engineering and Materials)
  • Article
  • Open Access
5 Citations
2,070 Views
13 Pages

Prediction of Crack Initiation Based on Energy Storage Rate during Low-Cycle Fatigue of Austenitic Stainless Steel

  • Wojciech Grodzki,
  • Wiera Oliferuk,
  • Michał Doroszko,
  • Jarosław Szusta and
  • Leszek Urbański

24 September 2021

The low-cycle deformation of 304L austenitic stainless steel was examined in terms of energy conversion. Specimens were subjected to cyclic loading at the frequency of 2 Hz. The loading process was carried out in a hybrid strain–stress manner. In eac...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
8 Citations
3,258 Views
20 Pages

7 March 2023

A series of medium-sized cyclic triaxial tests were performed to investigate the permanent deformation properties of granular materials. The strain rate was then plotted against loading cycles to classify the permanent deformation properties of granu...

(This article belongs to the Special Issue Advanced Experimental Research on Pavement and Subgrade Materials)

of 2