Skip to Content

905 Results Found

  • Article
  • Open Access
10 Citations
3,107 Views
32 Pages

Heat Convection in a Channel-Opened Cavity with Two Heated Sources and Baffle

  • Farhan Lafta Rashid,
  • Asseel M. Rasheed Al-Gaheeshi,
  • Hayder I. Mohammed and
  • Arman Ameen

3 March 2024

This study employs COMSOL software v 5.6 to investigate a novel approach to heat transfer via mixed convection in an open hollow structure with an unheated 90° baffle elbow. Two 20 W heat sources are strategically positioned on the cavity’s...

(This article belongs to the Special Issue New Challenges in Heat Transfer Enhancement)
  • Proceeding Paper
  • Open Access
2,000 Views
18 Pages

20 November 2017

Liquid impinging jet at the bottom of the annular cavity is a typical case in the process industry. The jet could have an impact at the bottom center or its peripheral section. The profiled annular cylindrical cavity with the installed electricity he...

(This article belongs to the Proceedings of The 4th International Electronic Conference on Entropy and Its Applications)
  • Article
  • Open Access
13 Citations
4,648 Views
17 Pages

Numerical Study of the Effect of a Heated Cylinder on Natural Convection in a Square Cavity in the Presence of a Magnetic Field

  • Muhammad Sajjad Hossain,
  • Muhammad Fayz-Al-Asad,
  • Muhammad Saiful Islam Mallik,
  • Mehmet Yavuz and ,
  • Md. Abdul Alim and
  • Kazi Md. Khairul Basher
  • + 1 author+ 0 author

The present research was developed to find out the effect of heated cylinder configurations in accordance with the magnetic field on the natural convective flow within a square cavity. In the cavity, four types of configurations—left bottom hea...

(This article belongs to the Special Issue Significance of Mathematical Modelling and Control in Real-World Problems: New Developments and Applications)
  • Article
  • Open Access
17 Citations
3,149 Views
18 Pages

Hydrothermal and Entropy Investigation of Nanofluid Mixed Convection in Triangular Cavity with Wavy Boundary Heated from below and Rotating Cylinders

  • Bellakhdar Mohamed Cherif,
  • Aissa Abderrahmane,
  • Abdulkafi Mohammed Saeed,
  • Naef A. A. Qasem and ,
  • Obai Younis,
  • Riadh Marzouki,
  • Jae Dong Chung and
  • Nehad Ali Shah
  • + 3 authors+ 0 author

26 April 2022

Nanofluids have become important working fluids for many engineering applications as they have better thermal properties than traditional liquids. Thus, this paper addresses heat transfer rates and entropy generation for a Fe3O4/MWCNT-water hybrid na...

(This article belongs to the Special Issue Nanomaterials-Based Solutions for Thermal Systems)
  • Article
  • Open Access
23 Citations
3,872 Views
10 Pages

22 November 2019

The study utilizes the energy-flux-vector method to analyze the heat transfer characteristics of natural convection in a wavy-wall porous square cavity with a partially-heated bottom surface. The effects of the modified Darcy number, modified Rayleig...

(This article belongs to the Special Issue Selected Papers from IEEE ICKII 2019)
  • Article
  • Open Access
634 Views
35 Pages

Dimensional and Non-Dimensional Implementations for the Differentially Heated Square Cavity Benchmark: Accuracy and Computational Efficiency

  • Fernando I. Molina-Herrera,
  • Hugo Jiménez-Islas,
  • María L. López-González,
  • Nora E. Maldonado-Sierra and ,
  • Pedro Yañez-Contreras,
  • Francisco J. Santander-Bastida,
  • Juan M. Oliveros-Muñoz and
  • Norma L. Flores-Martínez
  • + 3 authors+ 0 author

This study presents a numerical comparison of dimensional and non-dimensional implementations of the classical benchmark problem of steady natural convection in a two-dimensional differentially heated square cavity over the Rayleigh-number range 103...

  • Article
  • Open Access
29 Citations
5,728 Views
18 Pages

Numerical Study of Natural Convection of Power Law Fluid in a Square Cavity Fitted with a Uniformly Heated T-Fin

  • Sardar Bilal,
  • Noor Zeb Khan,
  • Imtiaz Ali Shah,
  • Jan Awrejcewicz and ,
  • Ali Akgül and
  • Muhammad Bilal Riaz
  • + 1 author+ 0 author

24 January 2022

Flow of a liquid in an enclosure with heat transfer has drawn special focus of researchers due to the abundant thermal engineering applications. So, the aim of present communication is to explore thermal characteristics of natural convective power-la...

(This article belongs to the Special Issue Computational Fluid Dynamics II)
  • Article
  • Open Access
3,150 Views
12 Pages

Radiation Effect on Heat Transfer in Narrow Cavities

  • Wen-He Zhou,
  • Lei Sun,
  • Si-Si Li and
  • Jian-Yun Wu

23 May 2023

The thermal comfort and air-conditioning energy consumption of vehicles or trains are dependent on the thermal resistance of its envelopes, which could be enhanced by improving the radiation characteristics of the narrow cavities scattered in their e...

(This article belongs to the Topic Applied Heat Transfer)
  • Article
  • Open Access
32 Citations
5,512 Views
15 Pages

12 April 2020

The application of microchannel heat exchangers is of great significance in industrial fields due to their advantages of miniaturized scale, large surface-area-to-volume ratio, and high heat transfer rate. In this study, microchannel heat exchangers...

  • Article
  • Open Access
7 Citations
3,591 Views
29 Pages

17 April 2021

Numerical simulations are subject to uncertainties due to the imprecise knowledge of physical properties, model parameters, as well as initial and boundary conditions. The assessment of these uncertainties is required for some applications. In the fi...

(This article belongs to the Special Issue Application of Computational Fluid Dynamics in Nuclear Reactor Safety Analysis)
  • Article
  • Open Access
62 Citations
7,240 Views
53 Pages

Heat Transfer in Cavities: Configurative Systematic Review

  • Goutam Saha,
  • Ahmed A.Y. Al-Waaly,
  • Manosh C. Paul and
  • Suvash C. Saha

28 February 2023

This study is a systematic review of research on heat transfer analysis in cavities and aims to provide a comprehensive understanding of flow and heat transfer performance in various kinds of cavities with or without the presence of fins, obstacles,...

(This article belongs to the Section J1: Heat and Mass Transfer)
  • Review
  • Open Access
64 Citations
4,819 Views
30 Pages

Review of Heat Transfer Analysis in Different Cavity Geometries with and without Nanofluids

  • Farhan Lafta Rashid,
  • Ahmed Kadhim Hussein,
  • Emad Hasani Malekshah,
  • Aissa Abderrahmane and ,
  • Kamel Guedri and
  • Obai Younis
  • + 1 author+ 0 author

19 July 2022

Many strategies have been attempted for accomplishing the needed changes in the heat-transfer rate in closed cavities in recent years. Some strategies used include the addition of flexible or hard partitions to the cavities (to split them into variou...

(This article belongs to the Special Issue New Frontiers in Nanofluids)
  • Article
  • Open Access
33 Citations
3,993 Views
22 Pages

24 July 2020

Due to the large surface-area-to-volume ratio, microchannel heat exchangers have a higher heat transfer rate compared with traditional scale heat exchangers. In this study, the optimum microchannel cavity with high heat transfer and low flow resistan...

(This article belongs to the Section A: Physics)
  • Article
  • Open Access
4 Citations
2,581 Views
25 Pages

The design of heat and drag reduction systems for hypersonic vehicles has garnered widespread global attention. In this study, the Navier–Stokes equations and the SST k-ω turbulence model are employed to establish a simulation model for h...

(This article belongs to the Special Issue Thermal Protection System Design of Space Vehicles)
  • Article
  • Open Access
9 Citations
2,921 Views
17 Pages

Numerical Study of Mixed Convection and Heat Transfer in Arc-Shaped Cavity with Inner Heat Sources

  • Huimin Cui,
  • Haoran An,
  • Wenyue Wang,
  • Zhiming Han and ,
  • Bo Hu,
  • Feng Xu,
  • Qingkuan Liu and
  • Suvash C. Saha
  • + 3 authors+ 0 author

12 January 2023

The mixed convection and heat transfer in enclosures with inner heat sources widely exist in building ventilation, cooling of nuclear reactors and cooling of electronic components. In this study, the heat transfer characteristics of mixed convection...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
30 Citations
6,910 Views
18 Pages

28 January 2022

To reduce carbon emissions during heating in the manufacturing processes, microwave technology has attracted significant attention. Microwaves have considerable advantages over traditional heating methods, including more rapid heating, lower thermal...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
2 Citations
3,540 Views
19 Pages

24 February 2020

The temperature distribution and thermal efficiency of a molten salt cavity receiver are investigated by a nonuniform heat transfer model based on thermal resistance analysis. For the cavity receiver MSEE in Sandia National Laboratories, thermal effi...

(This article belongs to the Section A2: Solar Energy and Photovoltaic Systems)
  • Article
  • Open Access
10 Citations
3,299 Views
25 Pages

Conjugate Radiation and Convection Heat Transfer Analysis in Solar Cooker Cavity Using a Computational Approach

  • Abhisek Sarangi,
  • Asish Sarangi,
  • Sudhansu Sekhar Sahoo,
  • Ramesh Kumar Mallik and
  • Mohamed M. Awad

2 May 2023

The heat loss caused by radiation and persistently laminar natural convection in a solar cooker cavity that has a rectangular cavity or a trapezoidal cavity are computationally explored in this paper. The hot bottom and the adiabatic side wall are bo...

(This article belongs to the Special Issue Applied Solar Thermal Energy)
  • Article
  • Open Access
13 Citations
2,071 Views
18 Pages

A Computational Study of Chaotic Flow and Heat Transfer within a Trapezoidal Cavity

  • Md. Mahafujur Rahaman,
  • Sidhartha Bhowmick,
  • Rabindra Nath Mondal and
  • Suvash C. Saha

28 June 2023

Numerical findings of natural convection flows in a trapezoidal cavity are reported in this study. This study focuses on the shift from symmetric steady to chaotic flow within the cavity. This cavity has a heated bottom wall, a cooled top wall, and a...

(This article belongs to the Section J1: Heat and Mass Transfer)
  • Article
  • Open Access
4 Citations
4,055 Views
21 Pages

28 March 2022

In buildings with the solar heat collection/insulation energy-saving window (SHC/IESW), when the insulation device is placed at night in winter, a double-wall structure façade (DSF) is formed between the glass and the insulation curtain, and t...

  • Article
  • Open Access
1 Citations
876 Views
15 Pages

23 September 2025

The secondary air system plays important roles in gas turbines, such as cooling hot-end components, sealing the rim, and balancing axial forces. In this paper, the flow structure and the heat transfer characteristics of the rotating disk cavity with...

(This article belongs to the Section J1: Heat and Mass Transfer)
  • Article
  • Open Access
8 Citations
4,360 Views
21 Pages

21 January 2022

The cavity receiver’s thermal conversion performance is critical for parabolic dish and tower Concentrated Solar Power (CSP) systems. Distinct from precedent research aiming to increase the receiver’s absorption through cavity geometry op...

(This article belongs to the Topic Solar Thermal Energy and Photovoltaic Systems)
  • Article
  • Open Access
39 Citations
3,438 Views
17 Pages

Hydrothermal and Entropy Investigation of Nanofluid Natural Convection in a Lid-Driven Cavity Concentric with an Elliptical Cavity with a Wavy Boundary Heated from Below

  • Aiman Alshare,
  • Aissa Abderrahmane,
  • Kamel Guedri,
  • Obai Younis and ,
  • Muhammed Fayz-Al-Asad,
  • Hafiz Muhammed Ali and
  • Wael Al-Kouz
  • + 2 authors+ 0 author

19 April 2022

This work investigates mixed convection in a lid-driven cavity. This cavity is filled with nanofluid and subjected to a magnetic field. The concentric ovoid cavity orientation (γ),  0–90°, and undulation number (N), 1–4, ar...

(This article belongs to the Special Issue Nanomaterials-Based Solutions for Thermal Systems)
  • Article
  • Open Access

Effect of magnetic field on mixed convection in a vented square cavity with volumetric heat generation or absorption in presence of a cylindrical obstacle is analyzed numerically. The right vertical wall is considered at the hot temperature Th and ot...

  • Article
  • Open Access
3 Citations
1,731 Views
22 Pages

20 August 2025

The flow and heat transfer in a rotating disk cavity with dual axial inlets are investigated under a range of operating conditions. A full 360° computational fluid dynamics model is employed, with 40 simulation cases varying the rotational Reynol...

  • Article
  • Open Access
59 Citations
3,534 Views
14 Pages

Mixed Convection inside a Duct with an Open Trapezoidal Cavity Equipped with Two Discrete Heat Sources and Moving Walls

  • Fateh Mebarek-Oudina,
  • Hanane Laouira,
  • Ahmed Kadhim Hussein,
  • Mohamed Omri and ,
  • Aissa Abderrahmane,
  • Lioua Kolsi and
  • Uddhaba Biswal
  • + 2 authors+ 0 author

14 March 2022

The current research presents a numerical investigation of the mixed convection inside a horizontal rectangular duct combined with an open trapezoidal cavity. The region in the bottom wall of the cavity is heated by using two discrete heat sources. T...

(This article belongs to the Special Issue Nonlinear Partial Differential Equations in Mathematical Fluid Dynamics)
  • Article
  • Open Access
5 Citations
2,604 Views
25 Pages

Investigation of Thermo-Hydraulics in a Lid-Driven Square Cavity with a Heated Hemispherical Obstacle at the Bottom

  • Farhan Lafta Rashid,
  • Abbas Fadhil Khalaf,
  • Arman Ameen and
  • Mudhar A. Al-Obaidi

8 May 2024

Lid-driven cavity (LDC) flow is a significant area of study in fluid mechanics due to its common occurrence in engineering challenges. However, using numerical simulations (ANSYS Fluent) to accurately predict fluid flow and mixed convective heat tran...

(This article belongs to the Section Thermodynamics)
  • Article
  • Open Access
2 Citations
982 Views
31 Pages

25 October 2025

An ambit of enhancing heat transfer throughout thermal convection in a cavity is explored numerically in this study, contemplating the heat dispersal from a segmental heat source circumscribed in a square-vented porous cavity with a moving lid. The c...

(This article belongs to the Special Issue Numerical Simulation and Application of Flow in Porous Media)
  • Article
  • Open Access
6 Citations
2,427 Views
14 Pages

Numerical Study on Free Convection in an Inclined Wavy Porous Cavity with Localized Heating

  • Sivasankaran Sivanandam,
  • Huey Tyng Cheong and
  • Aasaithambi Thangaraj

The goal of the present investigation is to explore the heater position and tilting angle of geometry on a buoyant convective stream and energy transport in a tilted, curved porous cavity. This work can be utilized in the field of solar panel constru...

  • Article
  • Open Access
461 Views
36 Pages

Effects of Rayleigh Number and Inclination Angle on Natural Convection in a Differentially Heated Square Cavity

  • Fernando I. Molina-Herrera,
  • María L. López-González,
  • Luis I. Quemada-Villagómez,
  • Shafqat Hussain and ,
  • Mario A. Sandoval-Hernández and
  • Hugo Jiménez-Islas
  • + 1 author+ 0 author

1 September 2026

This study presents a numerical investigation of natural convection in a two-dimensional inclined square cavity filled with air and subjected to differential heating. The effects of the Rayleigh number and cavity inclination on heat transfer and flow...

(This article belongs to the Section Modelling in Mechanics)
  • Article
  • Open Access
11 Citations
3,918 Views
27 Pages

10 July 2023

Numerical simulations have been performed to investigate the influence of constant volumetric heat generation and viscous dissipation on the unsteady natural convection flow of an incompressible Newtonian fluid contained in a rectangular cavity. The...

(This article belongs to the Section J1: Heat and Mass Transfer)
  • Article
  • Open Access
654 Views
41 Pages

Blade tip leakage flow in gas turbines is associated with aerodynamic loss and local heat transfer variation in the tip region. In this study, the flow structure, total pressure loss coefficient, heat transfer coefficient (HTC), and film cooling effe...

(This article belongs to the Section Turbomachinery)
  • Article
  • Open Access
10 Citations
6,672 Views
15 Pages

Axial Thrust, Disk Frictional Losses, and Heat Transfer in a Gas Turbine Disk Cavity

  • Bo Hu,
  • Xuesong Li,
  • Yanxia Fu,
  • Chunwei Gu and ,
  • Xiaodong Ren and
  • Jiaxing Lu
  • + 1 author+ 0 author

29 July 2019

The gas turbine is a kind of high-power and high-performance energy machine. Currently, it is a hot issue to improve the efficiency of the gas turbines by reducing the amount of secondary air used in the disk cavity. The precondition is to understand...

  • Article
  • Open Access
8 Citations
3,519 Views
20 Pages

23 October 2021

The cooling effect of turbine vane is of great importance for ensuring thermal protection and economic operation of gas turbines. This study aims to reveal the influence mechanism and performance of impingement cooling and heat transfer within a turb...

(This article belongs to the Special Issue Heat Transfer Reinforcement Techniques in Heat Exchangers)
  • Article
  • Open Access
2 Citations
3,659 Views
9 Pages

1 March 2019

Neutral beam injection, for plasma heating, will supposedly be achieved, in ITER, by collisional detachment of a pre-accelerated D − beam. Collisional detachment, however, makes use of a D 2 -filled neutralisation chamber, which has se...

(This article belongs to the Special Issue SPIG2018)
  • Article
  • Open Access
16 Citations
6,209 Views
34 Pages

Swirl Flow and Heat Transfer in a Rotor-Stator Cavity with Consideration of the Inlet Seal Thermal Deformation Effect

  • Yu Shi,
  • Shuiting Ding,
  • Peng Liu,
  • Tian Qiu and ,
  • Chuankai Liu,
  • Changbo Qiu and
  • Dahai Ye
  • + 2 authors+ 0 author

31 January 2023

In the typical structure of a turboshaft aero-engine, the mass flow of the cooling air in the rotor-stator cavity is controlled by the inlet seal labyrinth. This study focused on the swirl flow and heat transfer characteristics in a rotor-stator cavi...

(This article belongs to the Special Issue Fluid-Dynamics and Heat Transfer in Aerospace Propulsion Systems)
  • Article
  • Open Access
9 Citations
4,136 Views
21 Pages

21 November 2018

A numerical study of ferromagnetic-fluid flow and heat transfer in a square porous cavity under the effect of a magnetic field is presented. The water-magnetic particle suspension is treated as a miscible mixture and, thus, the magnetization, density...

(This article belongs to the Special Issue Fluid Flow and Heat Transfer)
  • Article
  • Open Access
25 Citations
3,339 Views
31 Pages

MHD Natural Convection and Radiation over a Flame in a Partially Heated Semicircular Cavity Filled with a Nanofluid

  • Obai Younis,
  • Milad Alizadeh,
  • Ahmed Kadhim Hussein,
  • Bagh Ali and ,
  • Uddhaba Biswal and
  • Emad Hasani Malekshah
  • + 1 author+ 0 author

18 April 2022

The numerical analysis of MHD-free convective heat transfer and its interaction with the radiation over a heated flame inside a porous semicircular cavity loaded with SWCNTs–water nanofluid was explored for the very first time in the present wo...

(This article belongs to the Special Issue Nonlinear Partial Differential Equations in Mathematical Fluid Dynamics)
  • Article
  • Open Access
3 Citations
3,234 Views
25 Pages

Natural Convection Fluid Flow and Heat Transfer in a Valley-Shaped Cavity

  • Sidhartha Bhowmick,
  • Laxmi Rani Roy,
  • Feng Xu and
  • Suvash C. Saha

The phenomenon of natural convection is the subject of significant research interest due to its widespread occurrence in both natural and industrial contexts. This study focuses on investigating natural convection phenomena within triangular enclosur...

(This article belongs to the Special Issue 10th Anniversary of Computation—Computational Heat and Mass Transfer (ICCHMT 2023))
  • Article
  • Open Access
11 Citations
2,406 Views
19 Pages

24 May 2024

The present numerical investigation is focused on analyzing the characteristics of steady laminar mixed convection flow in a lid-driven square cavity, specifically considering the utilization of Al2O3–water nanofluid. The Al2O3–water nano...

(This article belongs to the Special Issue New Trends and Processes in Nanofluids and Carbon-Based Nanoparticles)
  • Article
  • Open Access
3 Citations
4,035 Views
15 Pages

7 July 2019

A centrifugal carbon dioxide compressor is a kind of general machine with extensive applications. The geometry of the side chambers of the compressors can be determined by studying the rotor-stator cavity with centripetal through-flow. In this paper,...

  • Article
  • Open Access
723 Views
26 Pages

30 January 2026

Partitioned cavities are widely used in passive, compact thermal management systems (data-center liquid cooling, cryogenic hydrogen/LNG storage, and battery modules) where geometric confinement governs natural convection and heat transfer. This study...

  • Article
  • Open Access
11 Citations
3,067 Views
20 Pages

17 October 2022

In this paper, natural convective heat transfer in a rectangular cavity filled with (50% CuO-50% Al2O3)/water hybrid nanofluids connected to a wall containing a phase change material (PCM) has been experimentally investigated. The vertical walls were...

(This article belongs to the Special Issue Symmetry: Recent Developments in Engineering Science and Applications)
  • Article
  • Open Access
30 Citations
3,057 Views
17 Pages

Free Convection Heat Transfer and Entropy Generation in an Odd-Shaped Cavity Filled with a Cu-Al2O3 Hybrid Nanofluid

  • Mohammad Ghalambaz,
  • Seyed Mohsen Hashem Zadeh,
  • Ali Veismoradi,
  • Mikhail A. Sheremet and
  • Ioan Pop

12 January 2021

The present paper aims to analyze the thermal convective heat transport and generated irreversibility of water-Cu-Al2O3 hybrid nanosuspension in an odd-shaped cavity. The side walls are adiabatic, and the internal and external borders of the enclosur...

(This article belongs to the Special Issue Recent Advances in Conjugate Heat Transfer)
  • Article
  • Open Access
9 Citations
1,225 Views
34 Pages

17 July 2025

Based on admirable porous media performance and the popularity of additive manufacturing technology, gradient porous media are progressively being applied in increasing fields. In this study, convection heat transfer within a square vented cavity, pa...

(This article belongs to the Special Issue Numerical Modeling and Simulation of Multiphase Flows in Industrial and Environmental Applications)
  • Article
  • Open Access
8 Citations
2,178 Views
21 Pages

Finite Element Analysis of Laminar Natural Convection in a Differentially Heated Porous Cavity Using the Darcy–Brinkman Model

  • Benabderrahmane Farhat,
  • Noureddine Kaid,
  • Sultan Alqahtani,
  • Younes Menni and ,
  • Badr M. Alshammari and
  • Lioua Kolsi
  • + 1 author+ 0 author

13 September 2024

This study delves into the convective heat transfer phenomena within a square cavity that houses a porous medium, analyzing the effects of Darcy (Da) and Rayleigh (Ra) numbers on the thermal and fluid dynamic behavior within the system. Utilizing a c...

(This article belongs to the Section AI-Enabled Process Engineering)
  • Article
  • Open Access
6 Citations
3,145 Views
15 Pages

10 February 2022

We examine how a square-grid microstructure affects the manner in which a Bingham fluid is convected in a sidewall-heated rectangular porous cavity. When the porous microstructure is isotropic, flow arises only when the Darcy–Rayleigh number is...

(This article belongs to the Special Issue Physics in Engineering: A Themed Issue in Honour of Professor Peter Vadasz on the Occasion of His 70th Birthday)
  • Article
  • Open Access
3 Citations
1,087 Views
26 Pages

6 September 2025

Practical applications such as solar power energy systems, electronic cooling, and the convective drying of vented enclosures require continuous developments to enhance fluid and heat flow. Numerous studies have investigated the enhancement of heat t...

(This article belongs to the Section Computational Engineering)
  • Review
  • Open Access
37 Citations
5,619 Views
31 Pages

The Impact of Cavities in Different Thermal Applications of Nanofluids: A Review

  • Mudasar Zafar,
  • Hamzah Sakidin,
  • Mikhail Sheremet,
  • Iskandar Dzulkarnain and ,
  • Roslinda Mohd Nazar,
  • Abida Hussain,
  • Zafar Said,
  • Farkhanda Afzal,
  • Abdullah Al-Yaari and
  • Javed Akbar Khan
  • + 6 authors+ 1 author

22 March 2023

Nanofluids and nanotechnology are very important in enhancing heat transfer due to the thermal conductivity of their nanoparticles, which play a vital role in heat transfer applications. Researchers have used cavities filled with nanofluids for two d...

(This article belongs to the Special Issue Applications of Nanofluids – II)
  • Article
  • Open Access
3 Citations
2,941 Views
14 Pages

Analysis of Dielectric Attached on Sweep Frequency Microwave Heating Uniformity

  • Can Liang,
  • Yuehao Ma,
  • Fengming Yang,
  • Chengzhuo Wang and ,
  • Huacheng Zhu,
  • Yang Yang,
  • Long Gao and
  • Jia Liu
  • + 3 authors+ 0 author

8 August 2024

Traditional microwave heating faces challenges such as low efficiency and uneven heating, hindering its industrial application. Sweep frequency microwave heating is an effective way to improve uniformity. Larger cavity sizes result in better heating...

(This article belongs to the Section Chemical Processes and Systems)

of 19