Skip to Content

965 Results Found

  • Article
  • Open Access
267 Views
21 Pages

Full-Scale Test and Finite Element Analysis of Flat Tempered Glass Sheets Subjected to Long-Edge Bending

  • Wentao Li,
  • Jie Ming,
  • Wenjian Chen,
  • Jianghao Zhou and ,
  • Xiaoxiong Zha,
  • Hualin Cao and
  • Wei Wei
  • + 2 authors+ 0 author

20 September 2026

Flat tempered glass sheets subjected to cold bending have been increasingly used in modern architectural curtain walls due to its extremely low production and processing costs and construction flexibility. However, existing studies mainly focus on sm...

(This article belongs to the Special Issue Innovations in Structural Materials and Performance-Based Building Design)
  • Article
  • Open Access
5 Citations
3,633 Views
16 Pages

Full-Scale Fatigue Test and Finite Element Analysis on External Inclined Strut Welded Joints of a Wide-Flanged Composite Box Girder Bridge

  • Bin Wang,
  • Laijun Liu,
  • Yuqing Liu,
  • Xudong Jia and ,
  • Xiaoqing Xu,
  • Kaixiang Miao and
  • Jiandong Ji
  • + 2 authors+ 0 author

10 May 2023

For a wide-flanged composite box girder bridge, the risk of fatigue cracking in the external inclined strut welded joint under the fatigue vehicle load is a problem. The main purposes of this research are to verify the safety of the main bridge of th...

(This article belongs to the Special Issue Experimental Study, Numerical Simulation & Structural Applications of Construction Materials)
  • Article
  • Open Access
15 Citations
5,714 Views
26 Pages

Full-Scale Simulation and Validation of Wear for a Mining Rope Shovel Bucket

  • Andreas Svanberg,
  • Simon Larsson,
  • Rikard Mäki and
  • Pär Jonsén

11 June 2021

Failure in industrial processes is often related to wear and can cause significant problems. It is estimated that approximately 1–4% of the gross national product for an industrialized nation is related to abrasive wear. This work aims to numerically...

(This article belongs to the Special Issue Simulation Using the Discrete Element Method (DEM) in the Minerals Industry)
  • Article
  • Open Access
18 Citations
5,191 Views
16 Pages

15 August 2022

Concrete constructions need widespread monitoring for the control of their state of integrity during their service life. In particular, after critical events such as earthquakes, this type of structure may experience the formation and development of...

(This article belongs to the Special Issue Sensor and Embedded System Applications in Structural Engineering and Engineering Seismology)
  • Article
  • Open Access
7 Citations
4,336 Views
20 Pages

Axial Compression Behavior of Symmetrical Full-Scale Concrete Filled Double Skin Steel Tube Stub Columns

  • Wen Bai,
  • Yunhao Li,
  • Jing Ji,
  • Yuchen Liu and ,
  • Lei Zhang,
  • Ruili Wang,
  • Liangqin Jiang and
  • Lingjie He
  • + 3 authors+ 0 author

24 January 2022

To investigate the bearing behavior of symmetrical full-scale different strength concrete filled double skin steel tube (CFDST) stub columns, 19 full-scale specimens were designed, considering the slenderness ratio (λ); the compression strengt...

(This article belongs to the Special Issue Symmetry in Applied Mechanics Analysis on Smart Optical Fiber Sensors)
  • Article
  • Open Access
177 Views
21 Pages

25 October 2026

The shear capacity of underground box culverts decreases with increasing service life. Removing the soil above and enlarging the section are restricted. Bonded fiber-reinforced polymer (FRP) strengthening is suitable for these conditions, but full-sc...

(This article belongs to the Topic Advances in Fiber-Reinforced Composites)
  • Article
  • Open Access
7 Citations
6,507 Views
24 Pages

21 September 2018

This paper presents the full-scale experimental assessment of a log-house timber wall with partial thermal insulation under in-plane compression and exposed to fire on one side. A key aspect of the current design application for log-house systems is...

(This article belongs to the Special Issue Advances in Mass Timber and Timber Hybrid Lateral Load Resisting Systems)
  • Article
  • Open Access
2 Citations
1,681 Views
18 Pages

Experiment and Numerical Study on the Flexural Behavior of a 30 m Pre-Tensioned Concrete T-Beam with Polygonal Tendons

  • Bo Yang,
  • Chunlei Zhang,
  • Hai Yan,
  • Ding-Hao Yu and ,
  • Yaohui Xue,
  • Gang Li,
  • Mingguang Wei,
  • Jinglin Tao and
  • Huiteng Pei
  • + 4 authors+ 0 author

22 July 2025

As a novel prefabricated structural element, the pre-tensioned, prestressed concrete T-beam with polygonal tendons layout demonstrates advantages including reduced prestress loss, streamlined construction procedures, and stable manufacturing quality,...

(This article belongs to the Special Issue Structural Vibration Analysis and Control in Civil Engineering)
  • Article
  • Open Access
534 Views
28 Pages

A Full-Scale Thermo-Hydro-Mechanical Coupled Numerical Model for Wellbore Injection Operations

  • Quanbin Wang,
  • Deli Jia,
  • Jun Fu,
  • Chuan Yu and ,
  • Mujie Luo and
  • Xiuyuan Chen
  • + 1 author+ 0 author

10 May 2026

Injection operations are critical in subsurface energy engineering, where wellbores endure complex thermo-hydro-mechanical (THM) coupling under high-temperature and high-pressure conditions, impacting tubing string stability and wellbore long-term sa...

(This article belongs to the Section Petroleum and Low-Carbon Energy Process Engineering)
  • Article
  • Open Access
5 Citations
2,612 Views
24 Pages

3 January 2022

The use of adhesive to joint structural elements, despite many advantages of this technology, is not a method commonly used in engineering practice, especially in construction. This is mainly due to the poor recognition of the behavior, both in terms...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
9 Citations
2,726 Views
18 Pages

Experimental and Numerical Visualisation of Subsurface Rail Deformation in a Full-Scale Wheel–Rail Test Rig

  • Timna J. Gschwandl,
  • Tristan M. Weniger,
  • Thomas Antretter,
  • David Künstner and ,
  • Stephan Scheriau and
  • Werner Daves
  • + 1 author+ 0 author

8 June 2023

To tackle the problem of various types of rail damage, such as rolling contact fatigue (RCF) or wear, a profound knowledge of the occurring mechanisms is necessary. This paper presents a newly developed full-scale test rig experiment that involves in...

(This article belongs to the Section Metal Failure Analysis)
  • Article
  • Open Access
687 Views
21 Pages

Mechanical Behavior of Prestressed Concrete Cylinder Pipe Joints Under Rotation Action

  • Yihu Ma,
  • Haiyang Xie,
  • Guanglei Chen,
  • Deqiang Hu and ,
  • Bin Li,
  • Penglu Cui,
  • Xueming Du,
  • Hanying Wu and
  • Kejie Zhai
  • + 4 authors+ 0 author

16 March 2026

To investigate the mechanical performance and failure modes of Prestressed Concrete Cylinder Pipe (PCCP) bell-and-spigot joints under conditions such as differential settlement, this study conducted a full-scale rotation test on a DN1400 PCCP joint a...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
12 Citations
2,958 Views
15 Pages

A Numerical Prediction of the Resistance of Bulk Carriers in Brash Ice Channels

  • Haisu Sun,
  • Xuan Ni,
  • Yuxin Zhang,
  • Kang Chen and
  • Baoyu Ni

Ship resistance increases significantly when navigating a brash ice channel. In this study, the numerical method is applied to predict the full-scale ship resistance of bulk carriers in brash ice channels. The viscous flow computational fluid dynamic...

(This article belongs to the Special Issue Ice-Structure Interaction in Marine Engineering)
  • Article
  • Open Access
682 Views
23 Pages

Experimental and Numerical Characterization of a Prefabricated Timber Facade with Integrated HVAC Unit

  • Barbara Messner,
  • Martino Gubert,
  • Diego Tamburrini,
  • Stefano Avesani and ,
  • Giovanni Pernigotto,
  • Andrea Gasparella and
  • Ingrid Demanega
  • + 2 authors+ 0 author

17 March 2026

The built environment in the EU accounts for 40% of the total energy consumption and 36% of the total greenhouse gas emissions. To address the inefficiency of existing buildings, renovation could reduce their total energy consumption by 5–6% an...

(This article belongs to the Section Building Energy, Physics, Environment, and Systems)
  • Article
  • Open Access
1 Citations
1,719 Views
17 Pages

Numerical Simulation and Experimental Verification of Quality Detection of Grouting in Pre-Stressed Pipelines Based on Transmission Wave Method

  • Qingshan Wang,
  • Yun Luo,
  • Yang Liu,
  • Minghao Song and ,
  • Heng Liu and
  • Xiaoge Liu
  • + 1 author+ 0 author

28 April 2024

The quality of grouting in pre-stressed pipelines plays a critical role in ensuring the safety and durability of pre-stressed concrete bridges. In this study, the transmission wave method was proposed as a means to assess the quality of grouting in p...

(This article belongs to the Special Issue Advances in Civil Structural Damage Detection and Health Monitoring)
  • Article
  • Open Access
2 Citations
6,783 Views
21 Pages

12 July 2023

Rebar cages are the skeletons of reinforced concrete structures. These temporary structures consist of longitudinal and transverse reinforcing bars connected by tie-wires. Given the relatively low strength of tie-wire connections, replacing tie-wires...

(This article belongs to the Special Issue Engineering Structures: Design and Assessment Issues for Static and Seismic Actions)
  • Article
  • Open Access
3 Citations
3,264 Views
24 Pages

This study investigates the structural performance and load-bearing capacity of single- and double-story modular bridge configurations using both experimental testing and finite element analysis. A full-scale field test was conducted on a 45.7 m doub...

(This article belongs to the Special Issue Sustainable and Low-Carbon Building Materials and Structures)
  • Article
  • Open Access
8 Citations
4,612 Views
18 Pages

Case Study on Prestressed CFRP Plates Applied for Strengthening Hollow-Section Beam Removed from an Old Bridge

  • Guirong Liu,
  • Bingchen Li,
  • Jiasheng Bao,
  • Shengzhao Cheng and ,
  • Qingxin Meng and
  • Shunbo Zhao
  • + 1 author+ 0 author

20 January 2023

With the wide application of carbon fiber reinforced polymer (CFRP) plate, used for strengthening existed concrete structures, the prestressing technology of CFRP plate is becoming a hot topic, in order to sufficiently develop its high-strength pecul...

(This article belongs to the Special Issue Advances in Fiber-Reinforced Polymer Concrete)
  • Article
  • Open Access
11 Citations
2,870 Views
18 Pages

30 December 2022

Based on a previously designed variable-stiffness load transfer component (LTC), a novel dispersed-tendon cable anchor system (CAS) was developed to increase the anchoring efficiency of large-diameter basalt-fiber-reinforced polymer (BFRP) cables. Th...

(This article belongs to the Special Issue Fiber Reinforced Polymer (FRP) Composites for Construction)
  • Article
  • Open Access
6 Citations
2,866 Views
18 Pages

Finite Element Modeling and Experimental Investigation for Wood/PVC Composites Log-Walls under In-Plane Lateral Load

  • Warawit Eakintumas,
  • Tawich Pulngern,
  • Vichai Rosarpitak and
  • Narongrit Sombatsompop

2 November 2022

This work experimentally determines the in-plane lateral load behavior of a full-scale WPVC composite log-wall, with and without additional through-bolts. The results indicate that the WPVC composite log-wall panel with through-bolts produced higher...

(This article belongs to the Special Issue Advances in Reinforced Polymer Composites II)
  • Article
  • Open Access
1 Citations
1,391 Views
26 Pages

9 October 2025

This study investigates the mechanical behavior of a new type of link slab through experimental testing and numerical simulation. A full-scale segmental specimen of an I-shaped steel–concrete composite beam was designed, and a vertical active p...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
453 Views
21 Pages

11 August 2026

To evaluate the damage evolution of prestressed concrete cylinder pipe (PCCP) with broken wires and the effectiveness of internal steel-cylinder repair, a three-dimensional finite element model was established using ABAQUS and calibrated with a full-...

(This article belongs to the Special Issue Design, Mechanical Properties, and Fatigue Behavior of Materials, Welding Joints and Structures (Second Edition))
  • Article
  • Open Access
10 Citations
3,822 Views
27 Pages

Research on Mechanical Performance of Improved Low Vibration Track and Its Feasibility Analysis for Heavy-Haul Railway Applications

  • Zhiping Zeng,
  • Guangzhao Peng,
  • Wuji Guo,
  • Xiangdong Huang and ,
  • Weidong Wang,
  • Ji Hu,
  • Shiye Li,
  • Abdulmumin Ahmed Shuaibu,
  • Yu Yuan and
  • Xianggang Du
  • + 5 authors+ 0 author

1 November 2021

With the gradual increase of the cargo weight of heavy-haul trains, the traditional ballasted track with the accumulation of stone and ballast has been unable to meet its structural safety requirements. From the comparison of the three common ballast...

(This article belongs to the Special Issue Advanced Railway Infrastructures Engineering)
  • Article
  • Open Access
491 Views
31 Pages

28 February 2026

Based on the dual requirements of building energy efficiency and construction industrialization, along with the development of high-strength, high thermal resistance (low thermal conductivity) foamed concrete (HLFC), this study proposes a new prefabr...

(This article belongs to the Special Issue Advances Testing and Computation Methods for Disaster Mitigation of Engineering Structures—2nd Edition)
  • Article
  • Open Access
4 Citations
1,549 Views
26 Pages

Experimental and Numerical Investigation on Flexural Behaviors of a 30 m Full-Scale Prestressed UHPC-NC Composite Box Girder

  • Chengan Zhou,
  • Shengze Wu,
  • Kaisheng Wu,
  • Fan Mo and ,
  • Haibo Jiang,
  • Yueqiang Tian and
  • Junfa Fang
  • + 2 authors+ 0 author

28 August 2025

Ultra-high-performance concrete (UHPC) exhibits significantly superior compressive and tensile properties compared to conventional concrete, demonstrating substantial application potential in bridge engineering. This study conducted full-scale bendin...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
41 Citations
16,324 Views
14 Pages

Biogas Production from Thin Stillage on an Industrial Scale—Experience and Optimisation

  • Jan Moestedt,
  • Sören Nilsson Påledal,
  • Anna Schnürer and
  • Erik Nordell

29 October 2013

With the increasing demand for renewable energy and sustainable waste treatment, biogas production is expanding. Approximately four billion litres of bio-ethanol are produced annually for vehicle fuel in Europe, resulting in the production of large a...

(This article belongs to the Special Issue Biomass and Biofuels 2013)
  • Article
  • Open Access
2 Citations
1,054 Views
20 Pages

Experimental and Numerical Bearing Capacity Analysis of Locally Corroded K-Shaped Circular Joints

  • Ying-Qiang Su,
  • Shu-Jing Tong,
  • Hai-Lou Jiang,
  • Xiao-Dong Feng and ,
  • Jian-Hua Li and
  • Jian-Kun Xu
  • + 1 author+ 0 author

29 August 2025

This study systematically investigates the influence of varying corrosion severity on the bearing capacity of K-shaped circular-section joints, with explicit consideration of weld line positioning. Four full-scale circular-section joint specimens wit...

(This article belongs to the Special Issue Transformable and Modular Building Systems: Mechanics, Design, and Applications Innovations)
  • Article
  • Open Access
5 Citations
1,549 Views
27 Pages

In contrast to brittle normal-strength concrete (NSC), high-performance steel-fiber-reinforced concrete (HPSFRC) provides better tensile and shear resistance, enabling enhanced bridge girder design. To achieve a balance between cost efficiency and qu...

(This article belongs to the Special Issue Advances in Mechanical Behavior of Prefabricated Structures)
  • Article
  • Open Access
7 Citations
5,071 Views
16 Pages

A Realistic Full-Scale 3D Modeling of Turning Using Coupled Smoothed Particle Hydrodynamics and Finite Element Method for Predicting Cutting Forces

  • Nishant Ojal,
  • Ryan Copenhaver,
  • Harish P. Cherukuri,
  • Tony L. Schmitz and ,
  • Kyle T. Devlugt and
  • Adam W. Jaycox
  • + 1 author+ 0 author

Computational modelling is an effective technique for understanding the complex physics of machining. Large deformations, material separation, and high computational requirements are the key challenges faced while simulating machining. This work intr...

  • Article
  • Open Access
15 Citations
4,928 Views
23 Pages

Bayesian Model-Updating Implementation in a Five-Story Building

  • Oscar D. Hurtado,
  • Albert R. Ortiz,
  • Daniel Gomez and
  • Rodrigo Astroza

Simplifications and theoretical assumptions are usually incorporated into the numerical modeling of structures. However, these assumptions may reduce the accuracy of the simulation results. This problem has led to the development of model-updating te...

(This article belongs to the Special Issue Structural Identification and Damage Evaluation by Integrating Physics-Based Models with Data)
  • Article
  • Open Access
12 Citations
2,883 Views
18 Pages

7 December 2020

Owing to the development of new materials that enhance structural members in the construction field, steel–polymer composite floors have been developed and applied to steel structures. Similar to a sandwich system, steel–polymer composite...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
6 Citations
5,119 Views
20 Pages

Fatigue Life of a Comb Plate Expansion Joint

  • Yao Li,
  • Pengmin Lu,
  • Chenyu Liu,
  • Wei Ren and
  • Jintang Wen

20 April 2023

Comb-plate expansion joints are widely used in bridge construction, and their failures are mainly static strength and fatigue. This paper used a new type of comb-plate expansion joint as the research object. Firstly, the finite element models (FEM) o...

(This article belongs to the Section Machine Design and Theory)
  • Article
  • Open Access
15 Citations
10,880 Views
11 Pages

1 November 2018

Crash cushions are designed to gradually absorb the kinetic energy of an impacting vehicle and bring it to a controlled stop within an acceptable distance while maintaining a limited amount of deceleration on the occupants. These cushions are used to...

  • Article
  • Open Access
4 Citations
2,963 Views
17 Pages

Research on Full-Element and Multi-Time-Scale Modeling Method of BIM for Lean Construction

  • Xuefeng Zhao,
  • Haodong Chen,
  • Jing Liu,
  • Jiaqi Liu and ,
  • Meng Zhang,
  • Yibing Tao,
  • Junbo Li and
  • Xuyang Wang
  • + 3 authors+ 0 author

22 August 2023

Building Information Modeling (BIM) is a very effective technology for supporting lean construction. However, the current application of BIM during the construction phase does not incorporate all necessary elements of the construction site in a compr...

  • Article
  • Open Access
8 Citations
4,255 Views
28 Pages

Considering aeroelastic effects plays a vital role in the aircraft design process. The construction of elastic wind tunnel models is a critical element in the investigation of occurring aeroelastic phenomena. However, the structural scaling between f...

(This article belongs to the Special Issue Applied Aeroelasticity and Fluid-Structure Interaction)
  • Proceeding Paper
  • Open Access
5 Citations
2,949 Views
6 Pages

Global Response of a Three-Story Building Exposed to Blast Loading

  • Solveig Heggelund,
  • Kristoffer Brekken,
  • Petter Ingier and
  • Svein Olav Christensen

Experimental data from full-scale experiments with reinforced concrete buildings exposed to blast loading are limited. As full-scale experiments are expensive, numerical simulations of the global response of structures exposed to blast loading may be...

(This article belongs to the Proceedings of The 18th International Conference on Experimental Mechanics)
  • Article
  • Open Access
253 Views
22 Pages

11 June 2026

Existing research on the axial compressive performance and size effect of carbon fiber-reinforced polymer (CFRP)-confined recycled aggregate concrete (RAC) short columns mainly relies on macroscopic experimental analysis, lacking research methods cap...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
7 Citations
3,903 Views
20 Pages

27 October 2022

A new type of precast pile, namely steel strand square piles with reinforcement (PRS), is proposed in present study, which uses steel strand as a prestressed reinforcement and is equipped with hot-rolled reinforcement. Two kinds of full-scale pile sp...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
22 Citations
4,325 Views
17 Pages

Wind Tunnel Tests of Wake Characteristics for a Scaled Wind Turbine Model Based on Dynamic Similarity

  • Wei Yang,
  • Meng Yu,
  • Bowen Yan,
  • Guoqing Huang and ,
  • Qingshan Yang,
  • Senqin Zhang,
  • Tianhao Hong,
  • Xu Zhou and
  • Xiaowei Deng
  • + 4 authors+ 0 author

25 August 2022

This wind tunnel study was conducted to investigate the similarity laws involved in the reasonable simulation of the wake characteristics of a full-scale wind turbine. A 5 MW scaled wind turbine model was designed using an optimization method based o...

(This article belongs to the Section A3: Wind, Wave and Tidal Energy)
  • Article
  • Open Access
26 Citations
7,113 Views
13 Pages

Analysis of Concentration Polarisation in Full-Size Spiral Wound Reverse Osmosis Membranes Using Computational Fluid Dynamics

  • Wenshu Wei,
  • Xiang Zou,
  • Xinxiang Ji,
  • Rulin Zhou and ,
  • Kangkang Zhao and
  • Yuan Wang
  • + 1 author+ 0 author

A three-dimensional model for the simulation of concentration polarisation in a full-scale spiral wound reverse osmosis (RO) membrane element was developed. The model considered the coupled effect of complex spacer geometry, pressure drop and membran...

  • Article
  • Open Access
8 Citations
3,873 Views
20 Pages

Comparison of DEM Models with Different Elemental Dimensions for TBM Disc Cutter Rock Fragmentation

  • Chen Xu,
  • Yujie Zhu,
  • Danqing Song,
  • Xiaogang Guo and ,
  • Xiaoli Liu,
  • Enzhi Wang and
  • Runhu Lu
  • + 2 authors+ 0 author

10 October 2022

Disc cutters are the dominant tool used in the excavation of hard rock formations in any underground construction application, such as when tunneling using tunnel-boring machines (TBM), as well as in shaft- and raise boring operations. Optimization o...

(This article belongs to the Special Issue Sustainability in Geology and Civil Engineering)
  • Article
  • Open Access
3 Citations
2,892 Views
13 Pages

27 January 2022

In the modern construction industry, lightweight aggregate concrete (LWAC) is often used to produce load-bearing structural members. LWAC can be up to 40% lighter by volume than normal strength concrete. However, the lack of adequate numerical models...

(This article belongs to the Special Issue Advances in Serviceability Analysis of Concrete Structures)
  • Article
  • Open Access
2 Citations
3,321 Views
14 Pages

5 March 2020

This paper presents a discussion of the problem of compressive strength in a direction perpendicular to the grains based on test results of the joints made by timber posts and sill plate. These tests accompanied a larger series of full-scale tests of...

  • Article
  • Open Access
1 Citations
1,027 Views
16 Pages

18 September 2025

Steel trapezoidal profiled sheeting (STPS) is widely used in the construction industry. It is often viewed not as a structural element but as a material with its own properties, similar to bricks or masonry blocks. Consequently, to determine the load...

(This article belongs to the Special Issue Cement-Based/Non-Cement-Based Construction Materials: Multiscale Mechanics under Diverse Loadings)
  • Article
  • Open Access
39 Citations
11,578 Views
18 Pages

25 May 2018

A commercial 43 m wind turbine blade was tested under static loads. During these tests, loads, displacements, and local strains were recorded. In this work, the blade was modeled using the finite element method. Both a segment of the spar structure a...

(This article belongs to the Collection Wind Turbines)
  • Article
  • Open Access
  • Best Paper Award
28 Citations
8,491 Views
14 Pages

11 January 2023

Salvaged timber elements often have length limitations, and therefore, their reuse in structural products normally would require additional processing and end-to-end joining. This increases the costs of reusing such materials, which makes them even l...

(This article belongs to the Special Issue The Application and Performance of Timber in Construction)
  • Article
  • Open Access
7 Citations
3,345 Views
26 Pages

Hysteretic Behavior on Asymmetrical Composite Joints with Concrete-Filled Steel Tube Columns and Unequal High Steel Beams

  • Jing Ji,
  • Wen Zeng,
  • Liangqin Jiang,
  • Wen Bai and ,
  • Hongguo Ren,
  • Qingru Chai,
  • Lei Zhang,
  • Hongtao Wang,
  • Yunhao Li and
  • Lingjie He
  • + 5 authors+ 0 author

10 December 2021

In order to acquire the hysteretic behavior of the asymmetrical composite joints with concrete-filled steel tube (CFST) columns and unequal high steel beams, 36 full-scale composite joints were designed, and the CFST hoop coefficient (ξ), axial co...

(This article belongs to the Special Issue Symmetry in Applied Mechanics Analysis on Smart Optical Fiber Sensors)
  • Article
  • Open Access
1 Citations
5,358 Views
16 Pages

Experimental Loading of Staircase Made from Cement Fiber Boards with Cellulose Fibers Using Full-Scale Model

  • Ondřej Nespěšný,
  • David Bečkovský,
  • Jan Vystrčil,
  • Vojtěch Vaněk and ,
  • Miloslav Novotný and
  • Jan Pěnčík
  • + 1 author+ 0 author

The study presents a possible innovative use of cement fiber boards (CFBs) reinforced with cellulose fibers for construction of an interior prefabricated staircase. Regarding the unusual use of traditional material that was used in all bearing elemen...

(This article belongs to the Special Issue Experiment and Analysis of Building Structures)
  • Article
  • Open Access
10 Citations
5,864 Views
11 Pages

Numerical Simulations of Calcium Sulphate Scaling in Full-Scale Brackish Water Reverse Osmosis Pressure Vessels Using Computational Fluid Dynamics

  • Weidong Mao,
  • Xiang Zou,
  • Zhongquan Guo,
  • Sui Sun and ,
  • Sai Ma,
  • Shunzhi Lyv,
  • Yan Xiao,
  • Xinxiang Ji and
  • Yuan Wang
  • + 4 authors+ 0 author

Coal mine waters often have high salinity, hardness and alkalinity. The treatment of coal mine water requires careful management of multi-stage reverse osmosis (RO) systems to achieve effective recovery of water for domestic reuse, as well as zero li...

(This article belongs to the Special Issue Computational Modeling and Digitalisation in Membranes Process: Simulation, Design and Application)
  • Article
  • Open Access
29 Citations
10,545 Views
42 Pages

Study on Numerical Simulation Methods for Hypervelocity Impact on Large-Scale Complex Spacecraft Structures

  • Yanxi Zhang,
  • Fengjiang An,
  • Shasha Liao,
  • Cheng Wu and ,
  • Jian Liu and
  • Yipeng Li
  • + 1 author+ 0 author

25 December 2021

This paper aims to study the difference of results in breakup state judgment, debris cloud and fragment characteristic parameter during hypervelocity impact (HVI) on large-scale complex spacecraft structures by various numerical simulation methods. W...

of 20