Skip to Content

647 Results Found

  • Article
  • Open Access
47 Citations
6,382 Views
16 Pages

Upcycling of Electroplating Sludge to Prepare Erdite-Bearing Nanorods for the Adsorption of Heavy Metals from Electroplating Wastewater Effluent

  • Yanwen Liu,
  • Asghar Khan,
  • Zhihua Wang,
  • Yu Chen and ,
  • Suiyi Zhu,
  • Tong Sun,
  • Dongxu Liang and
  • Hongbin Yu
  • + 3 authors+ 0 author

3 April 2020

Electroplating sludge is a hazardous waste produced in plating and metallurgical processes which is commonly disposed of in safety landfills. In this work, electroplating sludge containing 25.6% Fe and 5.5% Co (named S1) and another containing 36.8%...

(This article belongs to the Special Issue Adsorbents for Water and Wastewater Treatment and Resource Recovery)
  • Article
  • Open Access
3 Citations
2,690 Views
16 Pages

8 August 2025

To achieve superior interfacial bonding between carbon fibers and an Al matrix, this study employed a simplified electroplating system to deposit Ni coatings on carbon fibers using an additive-free electrolyte. The investigation first optimized the c...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
3 Citations
2,078 Views
14 Pages

Investigation into Ultrasonic Oscillation-Assisted Nickel Electroplating onto a Diamond Surface

  • Qingming Fan,
  • Bin Guo,
  • Guokang Su,
  • Hui Qi and ,
  • Pengfan Li,
  • Chuanyun Zhang and
  • Kai Cheng
  • + 2 authors+ 0 author

21 August 2025

At present, there are some challenging issues for diamond electroplating devices, such as poor particle–cathode contact uniformity, low conductivity, inefficient deposition, and complex disassembly/cleaning process of the device. To overcome th...

  • Review
  • Open Access
35 Citations
6,353 Views
20 Pages

Approaches for the Treatment and Resource Utilization of Electroplating Sludge

  • Song Guo,
  • Huimin Wang,
  • Xiaoming Liu,
  • Zengqi Zhang and
  • Yu Liu

8 April 2024

The disposal of electroplating sludge (ES) is a major challenge for the sustainable development of the electroplating industry. ESs have a significant environmental impact, occupying valuable land resources and incurring high treatment costs, which i...

(This article belongs to the Section Green Materials)
  • Article
  • Open Access
2 Citations
2,797 Views
13 Pages

Electroplating Cobalt Films on Silicon Nanostructures for Sensing Molecules

  • Chihyang Chen,
  • Zhe Kan,
  • Zibo Wang,
  • Haibin Huo and
  • Mengyan Shen

2 December 2022

In this study, we electroplated Co and Cu on nano-spiked silicon substrates that were treated with femtosecond laser irradiations. With energy-dispersive X-ray (EDX) analysis by a scanning electron microscope (SEM), it was found that both Co and Cu a...

(This article belongs to the Special Issue Advanced Nanoscale Materials for Energy and Environment Applications)
  • Communication
  • Open Access
1 Citations
3,161 Views
6 Pages

16 May 2022

Microvia interconnectors are a critical element of 3D packaging technology, as they provide the shortest interconnection path between stacked chips. However, low efficiency of microvia filling is a long-standing problem. This study proposed a two-ste...

(This article belongs to the Topic Materials and Surface Treatment Processes Used for Engineering Applications)
  • Article
  • Open Access
1,231 Views
14 Pages

Electroplating Nickel Coatings on Foam Nickel for Sand Control Screens

  • Wenbo Wang,
  • Xinyang Luo,
  • Zhen Pei,
  • Shengchi Bai and ,
  • Wen Wen,
  • Huidi Yu,
  • Xiaoqi Wang and
  • Xingzhong Guo
  • + 3 authors+ 0 author

26 February 2026

Nickel foam filtration layers used in sand control screens for petroleum extraction often suffer from insufficient mechanical strength and poor corrosion resistance and wear resistance. In this work, a two-stage electroplating strategy using the same...

(This article belongs to the Special Issue Surface Modification of Metals for Corrosion Mitigation and Functionalization)
  • Article
  • Open Access
8 Citations
6,274 Views
10 Pages

11 November 2019

The high reliability of electroplating through silicon vias (TSVs) is an attractive hotspot in the application of high-density integrated circuit packaging. In this paper, improvements for fully filled TSVs by optimizing sputtering and electroplating...

  • Feature Paper
  • Review
  • Open Access
57 Citations
15,151 Views
17 Pages

The attributes of electroplating as a low-cost, simple, scalable, and manufacturable semiconductor deposition technique for the fabrication of large-area and nanotechnology-based device applications are discussed. These strengths of electrodeposition...

(This article belongs to the Special Issue Advanced Thin Film Materials for Photovoltaic Applications)
  • Article
  • Open Access
29 Citations
6,111 Views
14 Pages

Laser-Assisted Selective Fabrication of Copper Traces on Polymers by Electroplating

  • Vitalij Fiodorov,
  • Karolis Ratautas,
  • Zenius Mockus,
  • Romualdas Trusovas and ,
  • Lina Mikoliūnaitė and
  • Gediminas Račiukaitis
  • + 1 author+ 0 author

17 February 2022

The selective deposition of metals on dielectric materials is widely used in the electronic industry, making electro-conductive connections between circuit elements. We report a new low-cost laser-assisted method for the selective deposition of coppe...

(This article belongs to the Topic Application of Graphene-Based Materials)
  • Article
  • Open Access
5 Citations
4,896 Views
13 Pages

28 August 2024

Due to its excellent electrical performance, mechanical reliability, and thermal stability, electroplated gold is still the most commonly used material for movable beams in RF MEMS switches. This paper investigates the influence of process conditions...

  • Review
  • Open Access
24 Citations
9,639 Views
27 Pages

24 February 2025

Electroplating has become a cornerstone technology in semiconductor manufacturing, enabling high-performance interconnects and advanced packaging. Since the introduction of the Damascene Cu process at the 180 nm node, it has evolved to meet the deman...

  • Article
  • Open Access
3 Citations
2,770 Views
13 Pages

An In-Situ Electroplating Fabricated Fabry-Perot Interferometric Sensor and Its Temperature Sensing Characteristics

  • Sijia Li,
  • Yulong Li,
  • Xubo Liu,
  • Xuewen Li and ,
  • Tao Ding and
  • Hua Ouyang
  • + 1 author+ 0 author

30 November 2020

In this study, in-situ electroplating method was used to fabricate a metal joint fixed extrinsic Fabry-Perot interferometric (EFPI) sensor. Specifically, optical fibers were firstly chemical plated with a very thin conductive nickel layer and then el...

  • Article
  • Open Access
10 Citations
4,373 Views
21 Pages

28 May 2025

Electroplating sludge, a hazardous waste generated from the electroplating industry, contains significant quantities of heavy metals such as Cu, Cr, and Ni. Improper disposal of these metals poses severe environmental and health risks. This study pro...

(This article belongs to the Section Waste and Recycling)
  • Article
  • Open Access
23 Citations
5,093 Views
18 Pages

A Reverse Osmosis Process to Recover and Recycle Trivalent Chromium from Electroplating Wastewater

  • Roxanne Engstler,
  • Jan Reipert,
  • Somayeh Karimi,
  • Josipa Lisičar Vukušić and ,
  • Felix Heinzler,
  • Philip Davies,
  • Mathias Ulbricht and
  • Stéphan Barbe
  • + 3 authors+ 0 author

31 August 2022

Electroplating generates high volumes of rinse water that is contaminated with heavy metals. This study presents an approach for direct metal recovery and recycling from simulated rinse water, made up of an electroplating electrolyte used in industry...

(This article belongs to the Special Issue UF/NF/RO Membranes for Wastewater Treatment and Reuse)
  • Feature Paper
  • Article
  • Open Access
2 Citations
2,735 Views
15 Pages

6 January 2026

Electroplating wastewater poses a serious environmental threat due to its high concentrations of heavy metals and persistent organic pollutants. This study evaluated the efficiency of a combined coagulation and activated carbon filtration process for...

(This article belongs to the Special Issue Processes Development for Wastewater Treatment)
  • Article
  • Open Access
19 Citations
5,643 Views
12 Pages

Fabrication and Optimization of High Aspect Ratio Through-Silicon-Vias Electroplating for 3D Inductor

  • Haiwang Li,
  • Jiasi Liu,
  • Tiantong Xu,
  • Jingchao Xia and ,
  • Xiao Tan and
  • Zhi Tao
  • + 1 author+ 0 author

18 October 2018

In this study, the filling process of high aspect ratio through-silicon-vias (TSVs) under dense conditions using the electroplating method was efficiently achieved and optimized. Pulsed power was used as the experimental power source and the electrop...

  • Article
  • Open Access
3 Citations
1,750 Views
19 Pages

With the rapid development of China’s zinc-related industries, the grade of zinc concentrate has steadily declined, while the generation of zinc-containing solid waste has shown a significant upward trend. To address this issue, a collaborative...

  • Article
  • Open Access
13 Citations
9,096 Views
13 Pages

Electroplating on Al6082 Aluminium: A New Green and Sustainable Approach

  • Andrea Comparini,
  • Ivan Del Pace,
  • Walter Giurlani,
  • Roberta Emanuele and ,
  • Margherita Verrucchi,
  • Marco Bonechi and
  • Massimo Innocenti
  • + 2 authors+ 0 author

22 December 2022

Aluminium and its alloys are interesting for many applications because they are very light, cheap, and unlimitedly recyclable. Despite being a promising base material for the fashion-jewellery sector, their tendency to form a passivating film makes t...

(This article belongs to the Collection Feature Paper Collection for Topic Editors and Invited Scholars in Coatings)
  • Abstract
  • Open Access
1,769 Views
3 Pages

Engineered Porous Metal Structures via Electroplating in Two-Photon Polymerized Molds

  • Ana Luiza Silveira Fiates,
  • Sina Reede,
  • Franziska Bollhorst,
  • Lukas Hansen and ,
  • Klaus Froehner and
  • Michael J. Vellekoop
  • + 1 author+ 0 author

We report the realization of metallic 3D microstructures, electroplated in two-photon polymerized molds. These molds are typically 150 × 150 × 30 µm3 in size and the smallest feature size is about 1 µm. After the electroplatin...

(This article belongs to the Proceedings of XXXV EUROSENSORS Conference)
  • Feature Paper
  • Article
  • Open Access
3 Citations
3,253 Views
18 Pages

5 January 2024

The morphology of catalysts in microchannels plays a crucial role in the orbital maneuvering and networking applications of micro/nano satellites using hydrogen peroxide as a unit propellant. In this paper, a microfluidic reaction chip was designed a...

(This article belongs to the Section Catalytic Reaction Engineering)
  • Feature Paper
  • Article
  • Open Access
13 Citations
6,099 Views
9 Pages

17 March 2022

X-ray zone plates made from gold are common optical components used in X-ray imaging experiments. These nanostructures are normally fabricated using a combination of electron-beam lithography and gold electroplating with cyanide gold baths. In this s...

(This article belongs to the Special Issue Micro-Manufacturing and Applications, Volume III: Advanced Hybrid Processes in Micro-Manufacturing)
  • Article
  • Open Access
8 Citations
4,735 Views
16 Pages

Electrochemical Processes for the Treatment of Hazardous Wastes Exemplified by Electroplating Sludge Leaching Solutions

  • Nan Wu,
  • Xue Zhang,
  • Xuemin Zhang,
  • Yanjuan Li and ,
  • Xiaosan Song and
  • Sanfan Wang
  • + 1 author+ 0 author

2 June 2021

The solidified landfill disposal of hazardous solid waste such as electroplating sludge in arid/semi-arid areas has potential risks and hazards. In this study, the electrochemical method was used to destroy the structures of metal complexes in electr...

(This article belongs to the Section Wastewater Treatment and Reuse)
  • Review
  • Open Access
20 Citations
6,753 Views
31 Pages

What Is the Current State of Sustainability in the Decorative Electroplating Industry? A Close Look at New Practices and Advances

  • Walter Giurlani,
  • Giulio Pappaianni,
  • Fabio Biffoli,
  • Elena Mariani and ,
  • Marco Bonechi,
  • Leonardo Giliberti,
  • Margherita Tufarelli,
  • Paolo Franzo,
  • Elisabetta Cianfanelli and
  • Massimo Innocenti
  • + 5 authors+ 0 author

8 July 2024

Electroplating is a key process in many industrial fields such as automotive, electronics and decorative applications; this process makes it possible to provide new properties to substrates materials such as corrosion resistance, hardness and aesthet...

  • Article
  • Open Access
1 Citations
2,566 Views
11 Pages

3 July 2024

This study aimed to measure personal exposure to sulfuric acid in the electroplating industry to establish a predictive model and test its validation. We collected indoor air parameters and related information from four electroplating plants. Silica...

(This article belongs to the Special Issue Occupational and Environmental Exposures, Diseases and Epidemiology: From Basic Research to Human Health)
  • Article
  • Open Access
21 Citations
6,348 Views
11 Pages

27 December 2020

Here, in a certain high density interconnect (HDI) printed circuit board, the effect of copper sulfate and sulfuric acid on the filling effect of a blind hole with a certain diameter and depth was investigated by making a blind hole using a CO2 laser...

(This article belongs to the Special Issue Special Issue of Manufacturing Engineering Society-2020 (SIMES-2020))
  • Article
  • Open Access
21 Citations
5,021 Views
10 Pages

Fabrication of X-ray Gratings for Interferometric Imaging by Conformal Seedless Gold Electroplating

  • Konstantins Jefimovs,
  • Joan Vila-Comamala,
  • Carolina Arboleda,
  • Zhentian Wang and ,
  • Lucia Romano,
  • Zhitian Shi,
  • Matias Kagias and
  • Marco Stampanoni
  • + 3 authors+ 0 author

We present a method to produce small pitch gratings for X-ray interferometric imaging applications, allowing the phase sensitivity to be increased and/or the length of the laboratory setup to be minimized. The method is based on fabrication of high a...

(This article belongs to the Special Issue Recent Advances in Reactive Ion Etching and Applications of High-Aspect-Ratio Microfabrication)
  • Article
  • Open Access
7 Citations
3,119 Views
12 Pages

Distribution and Source Resolution of Heavy Metals in an Electroplating Site and Their Health Risk Assessment

  • Zikai Fan,
  • Xiaoyun Xu,
  • Rong Wang,
  • Zhi Meng and ,
  • Luochun Wang,
  • Xinde Cao and
  • Ziyang Lou
  • + 2 authors+ 0 author

9 August 2023

It is very important to understand the distribution and sources of typical potentially toxic elements in industrial sites in order to provide essential information for risk assessment and the process of land reclamation selection. Here, around 29 soi...

(This article belongs to the Special Issue Sustainability: Resources and Waste Management)
  • Article
  • Open Access
14 Citations
3,468 Views
14 Pages

Immobilization of Metals in Fired Clay Brick Incorporated with Aluminium-Rich Electroplating Sludge: Properties and Leaching Analysis

  • Azini Amiza Hashim,
  • Aeslina Abdul Kadir,
  • Noor Amira Sarani,
  • Mohd Ikhmal Haqeem Hassan and ,
  • Arunraj Kersnansamy and
  • Mohd Mustafa Al Bakri Abdullah
  • + 1 author+ 0 author

17 July 2022

Electroplating sludge is the hazardous waste discarded from the plating and extractive metallurgical process which can only be disposed of at a secured landfill. In this study, the physical and mechanical properties, as well as metal leaching analysi...

(This article belongs to the Section Green Building)
  • Article
  • Open Access
17 Citations
5,001 Views
10 Pages

30 September 2019

This study involves the fabrication and measurement of a flexible thermoelectric generator (FTG) using micromachining and electroplating processes. The area of the FTG is 46 × 17 mm2, and it is composed of 39 thermocouples in series. The thermo...

(This article belongs to the Special Issue 10th Anniversary of Micromachines)
  • Article
  • Open Access
9 Citations
6,457 Views
13 Pages

Copper-Electroplating-Modified Liquid Metal Microfluidic Electrodes

  • Jiahao Gong,
  • Bingxin Liu,
  • Pan Zhang,
  • Huimin Zhang and
  • Lin Gui

25 February 2022

Here, we report a novel technology for the fabrication of copper-electroplating-modified liquid metal microelectrodes. This technology overcomes the complexity of the traditional fabrication of sidewall solid metal electrodes and successfully fabrica...

(This article belongs to the Section Chemical Sensors)
  • Article
  • Open Access
7 Citations
4,035 Views
11 Pages

Electroplating Deposition of Bismuth Absorbers for X-ray Superconducting Transition Edge Sensors

  • Jian Chen,
  • Jinjin Li,
  • Xiaolong Xu,
  • Zhenyu Wang and ,
  • Siming Guo,
  • Zheng Jiang,
  • Huifang Gao,
  • Qing Zhong,
  • Yuan Zhong and
  • Xueshen Wang
  • + 6 authors+ 1 author

25 November 2021

An absorber with a high absorbing efficiency is crucial for X-ray transition edge sensors (TESs) to realize high quantum efficiency and the best energy resolution. Semimetal Bismuth (Bi) has shown greater superiority than gold (Au) as the absorber du...

(This article belongs to the Topic Inorganic Thin Film Materials)
  • Review
  • Open Access
189 Citations
33,071 Views
25 Pages

Electroplating for Decorative Applications: Recent Trends in Research and Development

  • Walter Giurlani,
  • Giovanni Zangari,
  • Filippo Gambinossi,
  • Maurizio Passaponti and ,
  • Emanuele Salvietti,
  • Francesco Di Benedetto,
  • Stefano Caporali and
  • Massimo Innocenti
  • + 3 authors+ 0 author

Electroplating processes are widely employed in industrial environments for a large variety of metallic coatings, ranging from technological to decorative applications. Even if the galvanic electrodeposition is certainly a mature technology, new conc...

(This article belongs to the Collection Surface and Interface Science and Engineering for the Society of the Future)
  • Article
  • Open Access
9 Citations
2,853 Views
13 Pages

Microwave Drying Kinetics of Chromium-Rich Electroplating Sludge

  • Jian Zhang,
  • Zhiwei Peng,
  • Guanwen Luo,
  • Ran Tian and
  • Mingjun Rao

30 December 2022

Chromium-rich electroplating sludge (CRES) is a hazardous solid waste with a high content of moisture requiring efficient drying before subsequent treatment. In this study, the microwave drying kinetics of CRES were examined. The results showed that...

(This article belongs to the Special Issue Comprehensive Utilization of Metallurgical Resources and Environmental Protection)
  • Article
  • Open Access
7 Citations
6,329 Views
11 Pages

7 February 2020

Electrodeposition is a versatile technique for the fabrication of electrodes in micro-electroanalytical devices. Conductive but low-cost materials, such as copper, can be coated with functional yet higher-cost materials such as gold or silver using e...

(This article belongs to the Special Issue Microfluidic Platforms for Environmental Monitoring and Medical Diagnostics)
  • Article
  • Open Access
244 Views
20 Pages

Rotating Magnetic Field-Assisted Vertical Sanding Electroplating Process for Diamond Wire

  • Tao Gong,
  • Jiahao Liu,
  • Jingang Liu,
  • Junhao Hu and ,
  • Zhuangzhi Li,
  • Xuan Zhou and
  • Ming Zhao
  • + 2 authors+ 0 author

13 October 2026

For coarse-diameter electroplated diamond wires, the traditional horizontal sanding process suffers from inhomogeneous circumferential abrasive distribution, a lengthy manufacturing process, and poor production consistency. To address these issues, a...

(This article belongs to the Special Issue Advanced Coating Technologies for Metals)
  • Article
  • Open Access
15 Citations
5,254 Views
11 Pages

16 April 2021

This work deals with a comparison between electroplating and Physical Vapor Deposition (PVD) finishing technologies applied in the fashion industry, with a special focus on their environmental impacts. The goal of this work is to present and validate...

  • Article
  • Open Access
11 Citations
7,725 Views
15 Pages

Effects of Organic Additives on Alkaline Non-Cyanide Zinc Electroplating

  • Su-Byung Jeon,
  • Byung-Ki Son,
  • Ji-Won Choi and
  • Injoon Son

18 April 2023

We investigated the effects and interactions of the organic additives Polyquaternium-2 (PUB) and 1-benzyl pyridinium-3-carboxylate (BPC) in alkaline non-cyanide zinc electroplating. As PUB and BPC were added, the cathode potential of the polarization...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Article
  • Open Access
22 Citations
9,131 Views
16 Pages

A Study on the Influence of the Electroplating Process on the Corrosion Resistance of Zinc-Based Alloy Coatings

  • Fan Cao,
  • Jianpeng Wang,
  • Yuli Lian,
  • Yuanhao Wang and ,
  • Xue Wang,
  • Xiaomin Wang,
  • Aiqing Song and
  • Lei Shi
  • + 3 authors+ 0 author

16 October 2023

A comprehensive analysis was conducted to examine the crystal phase composition, surface and cross-section morphology, elemental composition, thickness, and corrosion resistance of coatings. X-ray diffraction (XRD) was employed to investigate the tex...

(This article belongs to the Special Issue Advanced Corrosion Protection through Coatings and Surface Rebuilding)
  • Article
  • Open Access
3 Citations
2,788 Views
20 Pages

Precision Hotspot Mitigation in Wafer-Level Electroplating with Novel Auxiliary Electrode Design for Advanced Large-Scale Chip Packaging

  • Tao Jiang,
  • Huiyong Hu,
  • He Wang,
  • Qiongling Yin and ,
  • Pengpeng Lin,
  • Yongyan Wei,
  • Yanan Xu,
  • Yitian Wang and
  • Feng Hong
  • + 4 authors+ 0 author

27 February 2025

This study introduces a novel, non-rotationally symmetrical auxiliary electrode design aimed at mitigating localized hotspots and enhancing the deposition uniformity in wafer-level electroplating for advanced large-scale chip packaging. The formation...

(This article belongs to the Section Microelectronics)
  • Article
  • Open Access
4 Citations
3,139 Views
17 Pages

The Effect of Electroplating Nickel on the Mechanical Properties of Brittle Mg-Based Bulk Metallic Glasses

  • Jingyao Zhang,
  • Jing Li,
  • Mei Jing,
  • Lichen Zhao and ,
  • Yumin Qi,
  • Wei Yang and
  • Xin Wang
  • + 2 authors+ 0 author

13 September 2023

Magnesium-based bulk metallic glasses (BMGs) are typical intrinsic brittle lightweight BMG alloys, and their improvement in plasticity has attracted widespread attention in the field of BMGs. We used the electroplating method to modify the surface of...

(This article belongs to the Special Issue Microstructure, Mechanical and Tribological Properties of Alloys)
  • Article
  • Open Access
27 Citations
7,427 Views
17 Pages

Improvement of Ecological Risk Considering Heavy Metal in Soil and Groundwater Surrounding Electroplating Factories

  • Hong Fang,
  • Xiujuan Wang,
  • Di Xia,
  • Jianting Zhu and ,
  • Weida Yu,
  • Yaoming Su,
  • Jingwen Zeng,
  • Yuanling Zhang,
  • Xiaojun Lin and
  • Jinrong Qiu
  • + 6 authors+ 1 author

27 June 2022

Heavy metals in groundwater and soil are toxic to humans. An accurate risk assessment of heavy metal contamination can aid in environmental security decision making. In this study, the improved ecological risk index (RI) is used to comprehensively in...

(This article belongs to the Special Issue Advances in Remediation of Contaminated Sites: Volume I)
  • Article
  • Open Access
4 Citations
2,781 Views
10 Pages

Au Coated Printed Circuit Board Current Collectors Using a Pulse Electroplating Method for Fuel Cell Applications

  • Sang-Sun Park,
  • Na-Young Shin,
  • Chanmin Lee,
  • Yukwon Jeon and ,
  • Won Seok Chi and
  • Yong-Gun Shul
  • + 1 author+ 0 author

13 August 2021

The effect of the Au coated printed circuit board (PCB) as a current collector on the performance of fuel cells is demonstrated. In this study, optimized pulse electroplating was introduced, which was found to be much more effective compared to the d...

  • Article
  • Open Access
3 Citations
2,395 Views
16 Pages

Cu Pillar Electroplating Using a Synthetic Polyquaterntum Leveler and Its Coupling Effect on SAC305/Cu Solder Joint Voiding

  • Wenjie Li,
  • Zhe Li,
  • Fang-Yuan Zeng,
  • Qi Zhang and ,
  • Liwei Guo,
  • Dan Li,
  • Yong-Hui Ma and
  • Zhi-Quan Liu
  • + 3 authors+ 0 author

5 November 2024

With the advancement of high-integration and high-density interconnection in chip manufacturing and packaging, Cu bumping technology in wafer- and panel- level packaging is developed to micrometer-sized structures and pitches to accommodate increased...

  • Article
  • Open Access
Coatings2026, 16(12), 1381;https://doi.org/10.3390/coatings16121381 
(registering DOI)

21 November 2026

Recycling and reusing electroplating waste have been widely researched, but high initial capital costs and low product value often make these methods economically unfeasible at the industrial level. Moreover, disposing of this sludge remains a seriou...

(This article belongs to the Topic Advances in Coatings Technology and Their Multidisciplinary Applications)
  • Article
  • Open Access
2 Citations
1,479 Views
12 Pages

FEM Study on Electrolyte Additive, External Current Density, and via Geometry for Cu Electroplating of Through-Glass Vias

  • Xuan Zhang,
  • Yuqi Lin,
  • Rong Wang,
  • Xingyan Zhao and ,
  • Yang Qiu,
  • Shaonan Zheng,
  • Yuan Dong,
  • Qize Zhong and
  • Ting Hu
  • + 4 authors+ 0 author

Cu electroplating is one of the most expensive, complex and critical steps in fabricating through-glass vias (TGVs), which serve as the core component of 2.5D or 3D integration. This paper presents a simplified 2D via electroplating model to systemat...

  • Article
  • Open Access
6 Citations
4,155 Views
13 Pages

Seedless Cu Electroplating on Co-W Thin Films in Low pH Electrolyte: Early Stages of Formation

  • Rúben F. Santos,
  • Bruno M. C. Oliveira,
  • Alexandre Chícharo,
  • Pedro Alpuim and ,
  • Paulo J. Ferreira,
  • Sónia Simões,
  • Filomena Viana and
  • Manuel F. Vieira
  • + 3 authors+ 0 author

25 July 2021

The use of Ta/TaN barrier bilayer systems in electronic applications has been ubiquitous over the last decade. Alternative materials such as Co-W or Ru-W alloys have gathered interest as possible replacements due to their conjugation of favourable el...

(This article belongs to the Section Nanofabrication and Nanomanufacturing)
  • Article
  • Open Access
3 Citations
4,490 Views
9 Pages

Optimizing Nickel Electroplating in Low-Ni Environments for Efficient Source Production in Small Plating Baths

  • Gujin Kang,
  • Jongbum Kim,
  • Jin Kim,
  • Jinjoo Kim and ,
  • Jintae Hong and
  • Sangwook Kim
  • + 1 author+ 0 author

Electroplating nickel-63, a radioactive isotope used in betavoltaic batteries and random number generators, requires precise control due to its limited availability and the generation of radioactive waste. To minimize waste and ensure effective plati...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
8 Citations
2,966 Views
11 Pages

Correction of Phase Balance on Nd:YAG Pulsed Laser Welded UNS S32750 Using Cobalt Electroplating Technique

  • Eli J. Da Cruz Junior,
  • Bruna B. Seloto,
  • Vicente A. Ventrella,
  • Francisco M. F. A. Varasquim and ,
  • Andrea Zambon,
  • Irene Calliari,
  • Claudio Gennari and
  • Alessio G. Settimi
  • + 3 authors+ 0 author

2 February 2023

Super-duplex stainless steel (SDSS) shows high mechanical and corrosion resistance because of the balanced structure of austenite and ferrite. However, maintaining this phase ratio after welding is a challenge. The use of austenite stabilizing compon...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Austenitic Stainless Steels)
  • Article
  • Open Access
1 Citations
1,472 Views
20 Pages

Electroplating Composite Coatings of Nickel with Dispersed WO3 and MoO3 on Al Substrate to Increase Wear Resistance

  • Petr Osipov,
  • Roza Shayakhmetova,
  • Danatbek Murzalinov,
  • Azamat Sagyndykov and ,
  • Ainur Kali,
  • Anar Mukhametzhanova,
  • Galymzhan Maldybayev and
  • Konstantin Mit
  • + 3 authors+ 0 author

13 June 2025

Investigations of the synthesis of multicomponent coatings and their subsequent application to metal substrates to increase the wear resistance of materials is relevant for industry. Nickel compounds obtained from oxidized magnesia-iron nickel ores w...

(This article belongs to the Section Advanced Composites)

of 13