Skip to Content

9,681 Results Found

  • Article
  • Open Access
5 Citations
1,565 Views
27 Pages

In contrast to brittle normal-strength concrete (NSC), high-performance steel-fiber-reinforced concrete (HPSFRC) provides better tensile and shear resistance, enabling enhanced bridge girder design. To achieve a balance between cost efficiency and qu...

(This article belongs to the Special Issue Advances in Mechanical Behavior of Prefabricated Structures)
  • Article
  • Open Access
18 Citations
3,733 Views
13 Pages

Performance of Warm-Mixed Flame Retardant Modified Asphalt Binder

  • Ruixia Li,
  • Kaiwei Zhang,
  • Jiahui Wu and
  • Wenjuan Liu

10 April 2019

In order to analyze the effect of flame retardant and warm mix asphalt (WMA) additives-Sasobit on the flame-retardant performance and pavement performance of asphalt binder, the limiting oxygen index test, conventional performance test, and Superpave...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
2 Citations
3,077 Views
33 Pages

Aerodynamic Layout Design of a Compound Conventional Rotor High-Speed Unmanned Helicopter

  • Long He,
  • Liangquan Wang,
  • Shipeng Yang,
  • Jinwu Xiang and ,
  • Qinghua Zhu and
  • Dongxia Xu
  • + 1 author+ 0 author

12 April 2026

High-speed capability is a defining feature of next-generation helicopters, enabling time-sensitive missions. This paper compares three high-speed configurations: tiltrotor, coaxial rigid rotor, and compound conventional rotor. Based on existing tech...

(This article belongs to the Section Drone Design and Development)
  • Article
  • Open Access
39 Citations
3,693 Views
19 Pages

Transforming Conventional Construction Binders and Grouts into High-Performance Nanocarbon Binders and Grouts for Today’s Constructions

  • Herda Yati Binti Katman,
  • Wong Jee Khai,
  • Mehmet Serkan Kırgız,
  • Moncef L. Nehdi and ,
  • Omrane Benjeddou,
  • Blessen Skariah Thomas,
  • Styliani Papatzani,
  • Kishor Rambhad,
  • Manoj A. Kumbhalkar and
  • Arash Karimipour
  • + 5 authors+ 0 author

The transformation of conventional binder and grout into high-performance nanocarbon binder and grout was evaluated in this investigation. The high-performance nanocarbon grout consisted of grey cement, white cement, lime, gypsum, sand, water, and gr...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
1,186 Views
33 Pages

Performance of Piezoball and Piezo-T Flow Penetrometers Compared with Conventional In Situ Tests in Brazilian Soft Soils

  • Jonatas Sosnoski,
  • Gracieli Dienstmann,
  • Helena Paula Nierwinski,
  • Edgar Odebrecht and ,
  • Graziella Maria Faquim Jannuzzi and
  • Fernando Artur Brasil Danziger
  • + 1 author+ 0 author

Limitations of the cone penetration test, especially to accurately determine undrained shear strength (Su) in soft soil deposits with high in situ stresses, have motivated the development of alternative devices, such as the T-bar and ball penetration...

(This article belongs to the Special Issue Recent Advances in Geotechnical Engineering (3rd Edition))
  • Article
  • Open Access
15 Citations
3,012 Views
21 Pages

12 December 2023

The balanced mix design (BMD) constitutes a significant step forward in the pursuit of better-performing asphalt mixtures. This approach/framework offers increased innovative opportunities for the proper design and production of engineered asphalt mi...

(This article belongs to the Collection Advanced Civil Engineering Materials: From Synthesis to Application)
  • Article
  • Open Access
6 Citations
3,524 Views
8 Pages

21 April 2020

Background: We compared the utility of the penile cuff test (PCT) and the conventional urodynamic study (UDS) for the preoperative assessment of patients undergoing scheduled photoselective vaporization of the prostate (PVP) for benign prostate hyper...

(This article belongs to the Special Issue Lower Urinary Tract Symptoms and Benign Prostatic Hyperplasia)
  • Article
  • Open Access
13 Citations
4,221 Views
8 Pages

Masticatory Performance Test Using a Gummy Jelly for Older People with Low Masticatory Ability

  • Kazuhiro Murakami,
  • Tasuku Yoshimoto,
  • Kazuhiro Hori,
  • Rikako Sato and ,
  • Ma. Therese Sta. Maria,
  • Pinta Marito,
  • Hinako Takano,
  • Aye Mya Mya Khaing,
  • Takashi Nokubi and
  • Takahiro Ono
  • + 5 authors+ 0 author

11 January 2023

Evaluation of masticatory ability has become more important in an aging society because decreased masticatory ability has the potential to affect the general health of older people. A new masticatory performance test, intended for older people with l...

(This article belongs to the Special Issue New Perspectives in Oral Health for Patients with Special Needs and Compromised Older Adults)
  • Article
  • Open Access
15 Citations
3,865 Views
14 Pages

1 July 2018

The energy performance of the semi-transparent PV (STPV) window was carried out in a hot-summer and cold-winter zone of China. Semi-transparent PV (STPV) windows generate electric, reduce the heating load and aim to utilize daylighting efficiently. I...

(This article belongs to the Special Issue Building renewable energy and thermal energy storage system 2018)
  • Article
  • Open Access
17 Citations
2,970 Views
9 Pages

Comparison of Antimicrobial Resistances in Escherichia coli from Conventionally and Organic Farmed Poultry from Germany

  • Mirjam Grobbel,
  • Jens A. Hammerl,
  • Katja Alt,
  • Alexandra Irrgang and ,
  • Annemarie Kaesbohrer and
  • Bernd-Alois Tenhagen
  • + 1 author+ 0 author

21 September 2022

In this study, resistance rates in Escherichia coli from organic and conventional poultry in Germany were compared. Isolates were randomly collected from organic and conventional broiler and turkey flocks at the farm and from turkey meat at retail. R...

(This article belongs to the Special Issue Antimicrobial Compounds and Antimicrobial Resistance: The Big Challenge of the One Health Approach)
  • Article
  • Open Access
1 Citations
1,840 Views
21 Pages

27 July 2023

To address the practical problem of decreased anchoring effect due to the detachment of the exterior bolt head from the cave wall under dynamic loads, this paper developed a partially recoverable displacement energy absorption (RDEA) bolt. On the bas...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
8 Citations
3,722 Views
11 Pages

Analysis of Plantar Tactile Sensitivity in Older Women after Conventional Proprioceptive Training and Exergame

  • Claudio Henrique Meira Mascarenhas,
  • José Ailton Oliveira Carneiro,
  • Thaiza Teixeira Xavier Nobre,
  • Ludmila Schettino and ,
  • Claudineia Matos de Araujo,
  • Luciana Araújo dos Reis and
  • Marcos Henrique Fernandes
  • + 2 authors+ 0 author

Objective: To evaluate and compare the effects of conventional proprioceptive training and games with motion monitoring on plantar tactile sensitivity in older women. Methods: A randomized controlled clinical trial, with 50 older women randomized int...

(This article belongs to the Special Issue Aging, Physical Activity, and Health)
  • Article
  • Open Access
1 Citations
2,852 Views
13 Pages

Artificial Intelligence in the Identification of Germinated Soybean Seeds

  • Hiago H. R. Zanetoni,
  • Lucas G. Araujo,
  • Reynaldo P. Almeida and
  • Carlos E. A. Cabral

This study resulted from the demand for seeds with physiological qualities and studies in germination tests applied for seed improvement aimed at productive and homogeneous harvests. The objective of this study was to improve the classification of se...

(This article belongs to the Special Issue Transforming Agriculture with Artificial Intelligence: Recent Advances and Applications)
  • Feature Paper
  • Article
  • Open Access
40 Citations
5,996 Views
14 Pages

2 February 2022

Scrap tire rubber and nylon fiber are waste materials that could potentially be recycled and used to improve the mechanical properties of asphalt pavement. The objective of this research was to investigate the properties of scrap tire rubber and nylo...

(This article belongs to the Collection Sustainable and Green Construction Materials)
  • Article
  • Open Access
4 Citations
2,958 Views
10 Pages

Comparison of Retention between Conventional and Nanofilled Resin Sealants in a Paediatric Population: A Randomized Clinical Trial

  • Vinayak Kamath,
  • Mamata Hebbal,
  • Anil Ankola,
  • Roopali Sankeshwari and ,
  • Sagar Jalihal,
  • Abhra Choudhury,
  • Mai Soliman and
  • Elzahraa Eldwakhly
  • + 3 authors+ 0 author

8 June 2022

Background: This study compared conventional-resin-sealant versus nanofilled-sealant retention at different intervals. Methods: A double-blinded split-mouth randomized control trial was performed on sixty-two children aged from six to nine years. Par...

(This article belongs to the Special Issue Prevention and Management of Dental Caries and Erosive Tooth Wear)
  • Article
  • Open Access
2 Citations
4,413 Views
17 Pages

Improved Current Sensor for Water Diffusion Testing of Composite Insulators

  • Zhonghao Zhang,
  • Fanghui Yin,
  • Liming Wang and
  • Hongwei Mei

14 February 2019

An improved current sensor aimed at measuring currents of different parts in composite insulator samples was proposed. Conventional current sensors used in water diffusion tests aim to examine the performance of composite insulators, however, it is d...

(This article belongs to the Special Issue Advances in FRP Composites: Applications, Sensing, and Monitoring)
  • Article
  • Open Access
965 Views
13 Pages

Bonding Performance, Mass Stability and Mechanical Properties of Self-Adhesive Resin Composites and Conventional Dental Composites: A Comparative Laboratory Evaluation

  • Md Sofiqul Islam,
  • Vivek Padmanabhan,
  • Nansi Fadi Wahbeh,
  • Lana Yassin Almaghribi and ,
  • Nada Tawfig Hashim,
  • Smriti Aryal A C,
  • Upoma Guha and
  • Muhammed Mustahsen Rahman
  • + 3 authors+ 0 author

1 September 2026

Self-adhesive resin composites (SARCs) are gaining popularity due to their simplified clinical steps. The objectives of the study were to evaluate the bonding performance, mass stability and mechanical properties of three SARC materials and to compar...

(This article belongs to the Special Issue Progress in Polymeric Dental Materials)
  • Article
  • Open Access
1 Citations
2,945 Views
16 Pages

3 February 2025

Fiber-reinforced polymers (FRPs) are often incorporated as internal (primary) reinforcement in new concrete constructions or as external (secondary) reinforcement in retrofitting and strengthening of existing concrete structures. Under fire condition...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
45 Citations
7,830 Views
17 Pages

24 February 2023

Dry-processed rubberized asphalt mixture has recently attracted a lot of attention as an alternative to conventional asphalt mixtures. Dry-processed rubberized asphalt pavement has improved the overall performance characteristics compared to the conv...

(This article belongs to the Special Issue Asphalt Mixtures and Pavements Design)
  • Article
  • Open Access
1,706 Views
20 Pages

Can Non-Conventional Blood Biomarkers Improve Running Performance Prediction? A Proof of Concept

  • Matija Dvorski,
  • Marija Rakovac,
  • Tomislav Kelava,
  • Nataša Kovačić and ,
  • Darja Flegar,
  • Sara Aničić,
  • Ivo Krešić,
  • Ljiljana Ćulibrk,
  • Filip Koražija and
  • Alan Šućur
  • + 6 authors+ 1 author

12 February 2026

Conventional measures such as maximal oxygen uptake (V˙O2max), although widely regarded as the gold standard, do not fully capture endurance performance. Therefore, this study investigated whether a 2.4 km Cooper test elicits measurable changes...

(This article belongs to the Special Issue Advances and Applications of Sport Physiology: 2nd Edition)
  • Article
  • Open Access
150 Views
15 Pages

Study on the Performance of K-Type Pre-Embedded Iron Seat for Double-Slip Turnouts

  • Zeyu Wu,
  • Dongsheng Yang,
  • Zhongyuan Wang,
  • Meng Wang and ,
  • Zelin Chen,
  • Zhenhua Zhao and
  • Pu Wang
  • + 2 authors+ 0 author

23 October 2026

There exist difficulties in applying conventional pre-embedded iron seats and their fastening systems in space-limited areas such as double-slip turnouts. To improve the convenience of fastener installation, a novel K-type pre-embedded iron seat and...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
44 Citations
9,394 Views
10 Pages

This study investigated the effects of a rehabilitation program using a wearable device on upper limb function, the performance of activities of daily living, and rehabilitation participation in acute phase stroke patients. A total of 44 patients wer...

  • Article
  • Open Access
3 Citations
1,436 Views
23 Pages

19 September 2025

This study conducted punching shear tests on steel grid–ultra-high-performance concrete (UHPC) composite bridge decks and performed finite element analysis (FEA) to evaluate their punching shear performance. Initially, a comparative analysis is...

(This article belongs to the Special Issue Advances Testing and Computation Methods for Disaster Mitigation of Engineering Structures—2nd Edition)
  • Proceeding Paper
  • Open Access
131 Views
9 Pages

Experimental Comparison of PID, LQI, and Nonlinear PID Controllers for Angular Position Control of a Vertical Take-Off and Landing System

  • Andrés Cuaycal,
  • Ronald Pillajo,
  • Jessica Balseca,
  • Stefany Villarreal and ,
  • Pablo Proaño and
  • Alan Cuenca-Sánchez
  • + 1 author+ 0 author

2 November 2026

This paper presents a comparative experimental evaluation of three control strategies for angular position regulation of a Vertical Take-Off and Landing (VTOL) system: a conventional Proportional–Integral–Derivative (PID) controller, a Li...

(This article belongs to the Proceedings of The XXXIV Conference on Electrical and Electronic Engineering (JIEE 2026))
  • Article
  • Open Access
9 Citations
4,305 Views
13 Pages

Effect of Crumb Rubber, Epolene (EE-2), and Date Palm Ash as Modifiers on the Performance of Binders and Mixtures: A Sustainable Approach

  • Muhammad Imran Khan,
  • Muslich Hartadi Sutanto,
  • Sri Sunarjono,
  • Shah Room and
  • Nur Izzi Md Yusoff

18 November 2019

The only type of conventional bitumen (PG 64-10) available in the Kingdom of Saudi Arabia (KSA) does not meet the temperature requirements of most of the kingdom’s regions. Hence, the binder needs to be modified to improve the performance of fl...

  • Article
  • Open Access
33 Citations
4,774 Views
42 Pages

Application of Neuro-Fuzzy Controller to Replace SMIB and Interconnected Multi-Machine Power System Stabilizers

  • Aliyu Sabo,
  • Noor Izzri Abdul Wahab,
  • Mohammad Lutfi Othman,
  • Mai Zurwatul Ahlam Mohd Jaffar and ,
  • Hakan Acikgoz and
  • Hamzeh Beiranvand
  • + 1 author+ 0 author

18 November 2020

In this research, an effective application and performance assessment of the Neuro-Fuzzy Controller (NFC) damping controller is designed to replace a single machine infinite bus (SMIB) power system stabilizer (PSS), and coordinated multi PSSs in larg...

  • Review
  • Open Access
31 Citations
12,374 Views
16 Pages

1 February 2022

Traditional neuromuscular tests (e.g., jumping and sprinting tasks) are useful to assess athletic performance, but the basic outcomes (e.g., jump height, sprint time) offer only a limited amount of information, warranting a more detailed approach to...

  • Article
  • Open Access
34 Citations
6,358 Views
17 Pages

4 January 2021

In this study, a linear quadratic regulator based on the fuzzy logic (LQRF) control algorithm for a variable-speed variable-pitch wind turbine was designed. In addition, to verify the optimum performance of the controller, simulations and wind tunnel...

(This article belongs to the Section A3: Wind, Wave and Tidal Energy)
  • Communication
  • Open Access
2 Citations
6,543 Views
12 Pages

A portable wireless device with a “vocal commands” feature for activating the mechanical milking phase in conventional milking parlors was developed and tested to increase the level of automation in the milking procedures. The device was tested in th...

(This article belongs to the Special Issue Big Data Application in Agriculture)
  • Article
  • Open Access
8 Citations
9,408 Views
20 Pages

4 January 2018

External Insulation Finishing System (EIFS) is recognized as a suitable method for attaining energy efficiency of buildings. However, conventional EIFS is not actively applied to building construction due to additional time and cost compared with int...

  • Article
  • Open Access
39 Citations
10,717 Views
19 Pages

17 April 2015

The utility of micro-electro-mechanical sensors (MEMS) for application in air-coupled (contactless or noncontact) sensing to concrete nondestructive testing (NDT) is studied in this paper. The fundamental operation and characteristics of MEMS are fi...

(This article belongs to the Special Issue Novel Sensors for Non-Destructive Testing and Structural Health Monitoring)
  • Article
  • Open Access
19 Citations
3,036 Views
13 Pages

9 June 2022

To promote the construction of environmentally friendly, sustainable pavements and solve the impact of the scarcity of asphalt resources on highway development, bio-mixed asphalt (BMA) modified by SBS and polyphosphoric acid (PPA) was prepared, and t...

(This article belongs to the Topic Advanced Polymer Materials for Sustainable Development and Health Care)
  • Proceeding Paper
  • Open Access
1,552 Views
11 Pages

3 November 2025

This experimental study investigates the effects of conventional and non-conventional (Electrical Discharge Machining, EDM) techniques on the performance of threading dies fabricated from H13 die steel. The research focuses on variations in material...

(This article belongs to the Proceedings of The 5th International Conference on Advances in Mechanical Engineering (ICAME-25))
  • Article
  • Open Access
17 Citations
5,085 Views
9 Pages

In this study, we evaluated the efficiency of a drive-through (DT) screening system for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) by comparing it with a conventional screening system. We reviewed and analyzed the SARS-CoV-2 screeni...

(This article belongs to the Special Issue Novel Coronavirus (SARS-CoV-2) Outbreak: Epidemiology, Research and Implications for Public Health)
  • Article
  • Open Access
12 Citations
4,072 Views
20 Pages

Analysis of a Vegetable Oil Performance in a Milling Process by MQL Lubrication

  • Inês S. Afonso,
  • José Pereira,
  • António E. Ribeiro,
  • Joana S. Amaral and ,
  • Nuno Rodrigues,
  • José R. Gomes,
  • Rui Lima and
  • João Ribeiro
  • + 3 authors+ 0 author

4 August 2022

In this work, we carried out a comparison between the dry machining of an aluminum block with conventional cutting oil and a block with vegetable oil. The two oils had different flow rates. Using the Taguchi method, it was possible to determine the m...

  • Article
  • Open Access
23 Citations
5,627 Views
13 Pages

17 January 2017

This study aims to show the effect of a modified equivalent mortar volume (EMV) method on the flexural performance of recycled concrete aggregate (RCA). To verify this, an experimental study was carried out firstly by testing fresh and hardened mater...

(This article belongs to the Section Sustainable Engineering and Science)
  • Article
  • Open Access
2 Citations
4,260 Views
16 Pages

An Improved Calibration Method to Determine the Strain Coefficient for Optical Fibre Sensing Cables

  • Pengju An,
  • Chaoqun Wei,
  • Huiming Tang,
  • Qinglu Deng and ,
  • Bofan Yu and
  • Kun Fang
  • + 1 author+ 0 author

7 October 2021

The strain coefficient of an optical fibre sensing cable is a critical parameter for a distributed optical fibre sensing system. The conventional tensile load test method tends to underestimate the strain coefficient of sensing cables due to slippage...

(This article belongs to the Section Optical Communication and Network)
  • Article
  • Open Access
30 Citations
5,737 Views
13 Pages

Comparison of a Novel Polymeric Hollow Fiber Heat Exchanger and a Commercially Available Metal Automotive Radiator

  • Tereza Kroulíková,
  • Tereza Kůdelová,
  • Erik Bartuli,
  • Jan Vančura and
  • Ilya Astrouski

6 April 2021

A novel heat exchanger for automotive applications developed by the Heat Transfer and Fluid Flow Laboratory at the Brno University of Technology, Czech Republic, is compared with a conventional commercially available metal radiator. The heat transfer...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
10 Citations
4,390 Views
27 Pages

Nano-technology has played a vital role in upgrading the durability and sustainability of asphalt pavements during the last decade. Conventional bitumen does not provide adequate performance against permanent deformation in severe weather conditions....

  • Article
  • Open Access
3 Citations
7,026 Views
11 Pages

Evaluation of Pre-Transfusion Crossmatch Test Using Microscanner C3

  • Insu Park,
  • Woong Sik Jang,
  • Chae Seung Lim and
  • Jeeyong Kim

A pre-transfusion crossmatch test is crucial for ensuring safe blood transfusions by identifying the compatibility between donor and recipient blood samples. Conventional tube methods for crossmatching have limitations, including subjectivity in resu...

(This article belongs to the Special Issue A Useful Diagnostic Method: Blood Test)
  • Proceeding Paper
  • Open Access
1,610 Views
5 Pages

Large-Scale Test Setup of Concrete Pavement Slabs Jointed by Carbon Fiber-Reinforced Polymer Dowel Bars as Load Transfer Devices

  • Taha Ahmed,
  • Ahmad Saad,
  • Abdulhadi Kazem,
  • Ali Radwan and ,
  • Ali AlMutairi and
  • Sarah Ashkanani
  • + 1 author+ 0 author

Conventional steel bars are mostly used as the main load transfer mechanism between jointed slabs in rigid pavements; however, they are generally prone to corrosion which reduces the load transfer efficiency at the joints. This study evaluates the pe...

(This article belongs to the Proceedings of The Second International Conference on Maintenance and Rehabilitation of Constructed Infrastructure Facilities (MAIREINFRA2))
  • Article
  • Open Access
388 Views
20 Pages

Wear Resistance and Fracture Load of Ceramic-Reinforced Hybrid 3D-Printed Denture Teeth: A Comparative Analysis Before and After Thermal Aging

  • Mohammed M. Gad,
  • Amr A. Mahrous,
  • Essam A. Nassar,
  • Ahmed Rahoma and ,
  • Hamsa kamal Ahmed,
  • Saqib Ali,
  • Ahmed E. Nassar,
  • Abdulrahman A. Balhaddad and
  • Ahmed Fathey Elhagali
  • + 4 authors+ 0 author

3 October 2026

Background/Objectives: This in vitro study evaluated the wear resistance and fracture load of newly introduced ceramic-reinforced hybrid 3D-printed permanent resin tooth materials and compared their mechanical performance with prefabricated polymethy...

(This article belongs to the Special Issue Digital Workflows in Prosthodontics and Implant Rehabilitation: From Design to Clinical Application)
  • Article
  • Open Access
18 Citations
10,897 Views
14 Pages

Sustainable Urban Street Comprising Permeable Pavement and Bioretention Facilities: A Practice

  • Yiqing Dai,
  • Jiwang Jiang,
  • Xingyu Gu,
  • Yanjing Zhao and
  • Fujian Ni

8 October 2020

Roadside bioretention and permeable pavements have proven effectiveness in rainwater filtration and waterlogging mitigation, but conventional street design approach could not accommodate their work in conjunction. In this research, possible roadside...

(This article belongs to the Special Issue Sustainability of Transport Infrastructures)
  • Article
  • Open Access
336 Views
23 Pages

6 November 2026

Background/Objectives: Patellofemoral pain syndrome (PFPS) is associated with pain, functional limitation and impaired balance. This study investigated whether adding neuromuscular training to conventional physiotherapy provides additional benefit ov...

(This article belongs to the Special Issue Clinical Updates in Physiotherapy for Musculoskeletal Disorders: 2nd Edition)
  • Article
  • Open Access
4 Citations
3,050 Views
18 Pages

The Hybrid Contra Rotating Propeller is a developing propulsion system that combines a conventional single-shaft propeller with a POD propeller to achieve high energy-saving performance through a Contra Rotating Propeller. In this paper, a new towing...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
7 Citations
3,368 Views
12 Pages

3 September 2021

This study aimed to evaluate the effectiveness of conventional and sonic activation techniques on push-out bond strength of fiber post cemented with two different monomers containing self-adhesive resin cement (SARC). Four groups (n = 19 each) were m...

(This article belongs to the Special Issue Bioinspired Materials for Dentistry)
  • Article
  • Open Access
1 Citations
3,646 Views
22 Pages

2 December 2019

The energy consumption for heating and cooling in the building sector accounts for more than one-third of total energy used worldwide. In view of that, it is important to develop energy efficient cooling and heating systems in order to conserve energ...

  • Feature Paper
  • Article
  • Open Access
16 Citations
10,177 Views
13 Pages

Bending and Torsion Fatigue-Testing Machine Developed for Multiaxial Non-Proportional Loading

  • Fumio Ogawa,
  • Yusuke Shimizu,
  • Stefano Bressan,
  • Takahiro Morishita and
  • Takamoto Itoh

18 October 2019

A new fatigue-testing machine was developed to perform high-cycle multiaxial fatigue tests at 50 Hz, in order to reduce testing time. The developed machine can combine bending and torsion loading and perform fatigue tests at a high frequency, under p...

  • Article
  • Open Access
9 Citations
3,168 Views
10 Pages

Analysis of Mechanical Properties and Printing Orientation Influence of Composite Resin for 3D Printing Compared to Conventional Resin

  • Leonardo V. Araújo,
  • Fabiana S. Figuerêdo de Siqueira,
  • Rayssa F. Cavaleiro de Macedo,
  • Felipe S. Gomes and ,
  • Gustavo G. Castro,
  • Daniela B. Dibai,
  • Etevaldo M. Maia Filho and
  • Rudys R. J. Tavarez
  • + 3 authors+ 0 author

18 November 2024

This study aimed to compare the flexural strength, surface roughness, and microhardness of a resin for three-dimensional (3D) printing and a conventional composite resin and to evaluate whether the printing orientation influences these properties. To...

(This article belongs to the Section Polymeric Materials)
  • Article
  • Open Access
2 Citations
1,924 Views
14 Pages

A Semi-Analytical Method for the Identification of DC-Decay Parameters at an Arbitrary Rotor Position in Large Synchronous Machines

  • Zhenming Lai,
  • Haoyu Kang,
  • Demin Liu,
  • Zhichao Wang and ,
  • Yong Yang and
  • Jin Wang
  • + 1 author+ 0 author

10 January 2025

Experimental approaches for the identification of dynamic parameters in synchronous machines mainly include two methods, a three-phase sudden short-circuit (TPSSC) test and a standstill frequency response (SSFR) test. However, the former has signific...

(This article belongs to the Section F: Electrical Engineering)

of 194