Skip to Content

2,672 Results Found

  • Article
  • Open Access
5 Citations
2,599 Views
14 Pages

Experimental Investigation of Surface Roughness in Milling of DuralcanTM Composite

  • Martyna Wiciak-Pikuła,
  • Paweł Twardowski,
  • Aneta Bartkowska and
  • Agata Felusiak-Czyryca

12 October 2021

In today’s developing aircraft and automotive industry, extremely durable and wear-resistant materials, especially in high temperatures, are applied. Due to this practical approach, conventional materials have been superseded by composite materials....

(This article belongs to the Special Issue Innovative and Modern Technologies of Material Machining in Cutting and Abrasive Processes)
  • Article
  • Open Access
53 Citations
7,002 Views
14 Pages

The Effect of Finishing and Polishing Sequences on The Surface Roughness of Three Different Nanocomposites and Composite/Enamel and Composite/Cementum Interfaces

  • Ksenia Babina,
  • Maria Polyakova,
  • Inna Sokhova,
  • Vladlena Doroshina and ,
  • Marianna Arakelyan and
  • Nina Novozhilova
  • + 1 author+ 0 author

The purpose of this study was to investigate the effect of final surface treatment and dental composite type on the roughness of the composite surface, composite/enamel interface, and composite/cementum interface, as well as on the polishing time. Cl...

(This article belongs to the Special Issue Nanocomposites: Nanoscience & Nanotechnology (Nanoscale Phenomena) in Advanced Composites)
  • Article
  • Open Access
5 Citations
1,333 Views
11 Pages

20 June 2025

Objective: The aim of this study was to compare the surface roughness of a conventional composite resin, a one-shade universal composite resin, and a group-shade universal composite resin after bleaching. Methods: A conventional composite resin, Clea...

  • Article
  • Open Access
19 Citations
5,811 Views
12 Pages

The Effect of Ultrasonic Scaling and Air-Powder Polishing on the Roughness of the Enamel, Three Different Nanocomposites, and Composite/Enamel and Composite/Cementum Interfaces

  • Ksenia Babina,
  • Maria Polyakova,
  • Inna Sokhova,
  • Vladlena Doroshina and ,
  • Marianna Arakelyan,
  • Alexandr Zaytsev and
  • Nina Novozhilova
  • + 2 authors+ 0 author

15 November 2021

We aimed to assess the effects of ultrasonic scaling and air-powder polishing on the roughness of enamel, three nanocomposites (Premise, Herculite Ultra, Harmonize), and composite/enamel and composite/cementum interfaces. Class V cavities were restor...

(This article belongs to the Special Issue New Insights in Nanomaterials for Dental Diseases Management)
  • Article
  • Open Access
1 Citations
923 Views
19 Pages

Effect of Simulated Oral Aging on Surface Roughness and Microhardness of Bulk-Fill Composite Resins

  • Alexandru Mihai Tănasă,
  • Ionuț Tărăboanță,
  • Irina Nica,
  • Andra Claudia Tărăboanță-Gamen and ,
  • Nicoleta Tofan,
  • Răzvan Constantin Brânzan,
  • Corina Alexandra Brânză-Concită and
  • Sorin Andrian
  • + 3 authors+ 0 author

15 June 2026

Introduction: The goal of this study was to evaluate the influence of combined artificial aging protocols on the surface roughness and Vickers microhardness of bulk-fill resin composites, compared with a nanofilled composite used as a reference. Mate...

(This article belongs to the Special Issue Dental Restorative Materials: Current Development and Future Horizons)
  • Article
  • Open Access
27 Citations
6,096 Views
11 Pages

Effects of Accelerated Aging on Color Stability and Surface Roughness of a Biomimetic Composite: An In Vitro Study

  • Abdullah Alshehri,
  • Feras Alhalabi,
  • Mohammed Mustafa,
  • Mohamed M. Awad and ,
  • Mohammed Alqhtani,
  • Mohammed Almutairi,
  • Faisal Alhijab,
  • Carlos A. Jurado,
  • Nicholas G. Fischer and
  • Abdulrahman Alshabib
  • + 6 authors+ 1 author

The aim of this in vitro study is to compare the color stability and surface roughness of conventional and self-blending resin composites before and after staining and aging. Three conventional composites (Filtek Z350, IPS Empress Direct, and Estalit...

(This article belongs to the Special Issue Biomimetic Remineralization on Enamel and Dentin)
  • Article
  • Open Access
1,021 Views
20 Pages

Influence of ZnO Nanoparticles on the Color and Surface Roughness of Composite and Glass-Ionomer Materials

  • Sanja Ilić,
  • Neda Ninkovic,
  • Branislav Sredanovic,
  • Goran Vučić and ,
  • Ljiljana Božić,
  • Ljubica Škrbić,
  • Jovana Kuzmanovic Pficer and
  • Dragica Manojlovic
  • + 3 authors+ 0 author

Objective: The effect of incorporating various concentrations of 210 nm ZnO nanoparticles (ZnO-NPs) into resin-based composites (RBCs) and glass-ionomer cement (GIC) on their color and surface roughness after immersion in red wine is evaluated. Mater...

(This article belongs to the Section Dental Biomaterials)
  • Article
  • Open Access
1 Citations
2,622 Views
18 Pages

Effect of Photoaging on the Structure, Optical Properties and Roughness of One-Shade Composite Restoratives

  • Aikaterini Petropoulou,
  • Maria Dimitriadi,
  • Spiros Zinelis,
  • Maria Antoniadou and
  • George Eliades

The aim of the study was to evaluate changes in the degree of C=C conversion (DC%), chemical structure, optical properties and roughness of one-shade composites before/after photoaging. Τhe one-shade materials tested were Charisma Topaz One (CHT)...

(This article belongs to the Special Issue Biomaterials in Conservative Dentistry and Prosthodontics)
  • Article
  • Open Access
20 Citations
3,625 Views
9 Pages

Evaluation of the Surface Roughness of Bulk-Fill Composite Resins after Submission to Acidic and Abrasive Aggressions

  • Ionuț Tărăboanță,
  • Dan Buhățel,
  • Corina Alexandra Brînză Concită,
  • Sorin Andrian and ,
  • Irina Nica,
  • Andra Claudia Tărăboanță-Gamen,
  • Răzvan Brânzan and
  • Simona Stoleriu
  • + 3 authors+ 0 author

This in vitro study aimed to assess the erosive effect of hydrochloric acid in association with toothbrushing procedure on the surface condition of three bulk-fill composite resins used for direct restoration. A total of 480 samples (160 from each co...

(This article belongs to the Special Issue Modern Polymers for Dental Application)
  • Article
  • Open Access
17 Citations
6,269 Views
12 Pages

Effect of Surface Roughness on the Bonding Strength and Spring-Back of a CFRP/CR980 Hybrid Composite

  • Ji Hoon Hwang,
  • Chul Kyu Jin,
  • Min Sik Lee,
  • Su Won Choi and
  • Chung Gil Kang

12 September 2018

Carbon fiber-reinforced plastic (CFRP), which is a light and composite material, has a higher specific strength and stiffness than metal materials. However, owing to its low elongation, it is vulnerable to local impacts such as collision. Therefore,...

(This article belongs to the Special Issue Material and Process Design for Lightweight Structures)
  • Article
  • Open Access
2 Citations
1,616 Views
16 Pages

7 April 2025

This work aims to compare the hardness (H) and roughness (Ra) of glass/epoxy composites after being exposed to various hostile environments, which is possible because the constituents are always the same. Considering the stacking sequence [452, 902,...

(This article belongs to the Special Issue Advancements in the Development of Polymer Composites: Design, Fabrication, Properties and Application)
  • Article
  • Open Access
30 Citations
5,918 Views
15 Pages

Enhancing Esthetics in Direct Dental Resin Composite: Investigating Surface Roughness and Color Stability

  • Adrian Ioan Hajdu,
  • Ramona Dumitrescu,
  • Octavia Balean,
  • Dacian Virgil Lalescu and ,
  • Berivan Laura Rebeca Buzatu,
  • Vanessa Bolchis,
  • Lucian Floare,
  • Diana Utu,
  • Daniela Jumanca and
  • Atena Galuscan
  • + 5 authors+ 0 author

Dental restorations must replicate the natural appearance of teeth while ensuring biocompatibility and durability. This study evaluated the surface characteristics and color stability of three dental composites—Herculite Ultra XRV, G-ænia...

(This article belongs to the Special Issue Dental Composite Resin: Characteristics and Future Perspectives)
  • Article
  • Open Access
2 Citations
2,527 Views
16 Pages

Influence of Composite Polishing Pastes on Surface Roughness and Their Stability After Simulated Tooth Brushing

  • Panagiotis Ntovas,
  • Bora Korkut,
  • Nikolaos Loumprinis,
  • Ioulianos Rachiotis and
  • Christos Rahiotis

10 November 2025

Background/Objectives: Achieving and maintaining a smooth restoration surface is clinically significant, as surface roughness is linked to plaque accumulation, staining, and wear. This study aimed to evaluate in vitro the effect of different polishin...

  • Article
  • Open Access
1 Citations
4,121 Views
16 Pages

Estimation of Boundary Shear Stress Distribution in a Trapezoidal Cross-Section Channel with Composite Roughness

  • You Luo,
  • Senlin Zhu,
  • Fan Yang,
  • Wenxiang Gao and ,
  • Caiming Yan and
  • Rencong Yan
  • + 1 author+ 0 author

17 August 2022

The estimation of boundary shear stress distribution in a channel is a challenge in some hydraulic or environment investigations. A new partition model of a trapezoidal cross-section in a prismatic channel with composite roughness has been introduced...

(This article belongs to the Section Hydraulics and Hydrodynamics)
  • Article
  • Open Access
1,227 Views
19 Pages

17 April 2026

Background: The aim of this in vitro study is to comparatively evaluate the effects of toothpaste formulations containing and not containing vitamin C on the surface roughness and microhardness of different composite resin materials. Methods: Four di...

(This article belongs to the Section Applied Dentistry and Oral Sciences)
  • Article
  • Open Access
13 Citations
3,598 Views
12 Pages

Influences of Successive Exposure to Bleaching and Fluoride Preparations on the Surface Hardness and Roughness of the Aged Resin Composite Restoratives

  • Khalid M. Abdelaziz,
  • Shugufta Mir,
  • Shafait Ullah Khateeb,
  • Suheel M. Baba and ,
  • Saud S. Alshahrani,
  • Eman A. Alshahrani and
  • Zahra A. Alsafi
  • + 2 authors+ 0 author

16 September 2020

Background and Objectives: Surfaces of composite restorations are adversely affected upon bleaching and topical fluoride application. Such a procedure is normally carried out in the presence of restorations already serving in a different oral environ...

(This article belongs to the Section Dentistry and Oral Health)
  • Article
  • Open Access
5 Citations
937 Views
14 Pages

10 April 2026

This in vitro study evaluated and compared the surface roughness, color stability, and gloss of two single-shade composite resins after simulated toothbrushing, and investigated the correlations among these parameters. Twenty disk-shaped specimens (n...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
16 Citations
3,572 Views
26 Pages

Prediction of Kerf Width and Surface Roughness of Al6351 Based Composite in Wire-Cut Electric Discharge Machining Using Mathematical Modelling

  • Hariharan Sree Ram,
  • Marimuthu Uthayakumar,
  • Shanmugam Suresh Kumar,
  • Sundaresan Thirumalai Kumaran and ,
  • Brian Azzopardi and
  • Kinga Korniejenko
  • + 1 author+ 0 author

30 January 2022

The machining of composite materials has been an area of intense research for the past couple of decades due to its wide range of applications, from automobiles to air crafts or from boats to nuclear systems. Non-conventional machining, especially el...

(This article belongs to the Section Advanced Composites)
  • Feature Paper
  • Article
  • Open Access
17 Citations
4,201 Views
19 Pages

19 September 2020

This work presents a comprehensive research using the Taguchi method and response surface methodology (RSM) to predict surface roughness parameters in wire electrical discharge machining (WEDM) manufacturing for a novel Ti–Al intermetallic base...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
4 Citations
1,101 Views
16 Pages

Optimization of Process Parameters for Minimum Kerf Taper Angle and Surface Roughness in the Abrasive Water Jet Machining of a Hybrid Composite

  • Sathvik M. Bekal,
  • Anupama Hiremath,
  • Murthy B. R. N.,
  • Suhas K. and ,
  • Harisha S. R.,
  • Gurumurthy B. M. and
  • Gowri Shakar M. C.
  • + 2 authors+ 0 author

5 November 2025

In the present experiment, the abrasive water jet machining parameters, such as water pressure, standoff distance, and traverse speed, are selected to study the effect of each parameter on the kerf taper angle and surface roughness during the machini...

(This article belongs to the Section Composites Manufacturing and Processing)
  • Article
  • Open Access
107 Citations
6,414 Views
15 Pages

Effect of Cold-Spray Parameters on Surface Roughness, Thickness and Adhesion of Copper-Based Composite Coating on Aluminum Alloy 6061 T6 Substrate

  • Ling Shao,
  • Na Xue,
  • Weiwei Li,
  • Song Liu and ,
  • Zhibiao Tu,
  • Yingwei Chen,
  • Jitang Zhang,
  • Sheng Dai,
  • Qijie Liu and
  • Liu Zhu
  • + 10 authors+ 5 authors

21 March 2023

A solid-state cold-spray technique was employed for depositing the copper-coated graphite reinforced copper-based composite coatings on aluminum alloy 6061 T6 substrate under different process parameters. The optimum process parameters of the cold-sp...

(This article belongs to the Topic Advances in the Metal-Based Hybrid Process of Additive Manufacturing)
  • Article
  • Open Access
2 Citations
1,125 Views
22 Pages

Impact of Layer Thickness on Mechanical Properties and Surface Roughness of FDM-Printed Carbon Fiber-PEEK Composite

  • Getu Koro Megersa,
  • Wojciech Sitek,
  • Agnieszka J. Nowak,
  • Łukasz Krzemiński and ,
  • Wojciech Kajzer and
  • Daria Niewolik
  • + 1 author+ 0 author

22 April 2026

Fused deposition modeling (FDM)-based three-dimensional (3D) fabrication offers a viable approach to manufacturing highly customized carbon fiber-reinforced polyether ether ketone (CFR-PEEK) components with complex geometries. However, the mechanical...

(This article belongs to the Topic Advanced Carbon Fiber Reinforced Composite Materials, 3rd Edition)
  • Article
  • Open Access
17 Citations
3,547 Views
13 Pages

The Effect of Dentifrice on Micro-Hardness, Surface Gloss, and Micro-Roughness of Nano Filled Conventional and Bulk-Fill Polymer Composite—A Micro Indentation and Profilometric Study

  • Mashael Binhasan,
  • Abdulilah H. Solimanie,
  • Khalid S. Almuammar,
  • Ahmed R. Alnajres and ,
  • Mai M. Alhamdan,
  • Khold Al Ahdal,
  • Yasser F. Alfaawaz,
  • Khalid Ali,
  • Fahim Vohra and
  • Tariq Abduljabbar
  • + 5 authors+ 0 author

20 June 2022

The aim of the present study was to evaluate the effect of brushing with two whitening dentifrices (Colgate Optic White (COW) and Colgate Optic White Charcoal (COC)) on surface gloss, micro-roughness, and micro-hardness of nanostructured hybrid conve...

(This article belongs to the Special Issue Adhesives and Composite Resins in Contemporary Restorative Dentistry: From the Lab to the Clinic)
  • Feature Paper
  • Article
  • Open Access
49 Citations
7,615 Views
12 Pages

An Experimental Investigation on the Material Removal Rate and Surface Roughness of a Hybrid Aluminum Metal Matrix Composite (Al6061/SiC/Gr)

  • Mandeep Singh,
  • Harish Kumar Garg,
  • Sthitapragyan Maharana,
  • Anchal Yadav and ,
  • Rasmeet Singh,
  • Pragyansu Maharana,
  • Tien V. T. Nguyen,
  • Sudesh Yadav and
  • M. K. Loganathan
  • + 4 authors+ 0 author

13 September 2021

The objective of this paper was to determine the optimum process parameters of an electric discharge machine while machining a new hybrid aluminum metal matrix composite. In this study, a new hybrid aluminum metal matrix composite was prepared, with...

(This article belongs to the Special Issue Advances in Lightweight Metal Matrix Composites)
  • Article
  • Open Access
24 Citations
2,801 Views
17 Pages

24 November 2022

Metal matrix composites (MMCs) are a special class of materials carrying combined properties that belongs to alloys and metals according to market demands. Therefore, they are used in different areas of industry, and the properties of this type of ma...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
1,677 Views
10 Pages

Effects of Over-the-Counter Whitening Products on Microhardness, Gloss Retention, and Surface Roughness of Z350 XT Universal Restorative Composite Resin

  • Mashael Binhasan,
  • Sadeem Alkhamees,
  • Reem Alkhraiyef,
  • Shahad Alsumikhi and ,
  • Sara Shabib,
  • Nourah Shono,
  • Haifa Barakah and
  • Nassr Al-Maflehi
  • + 3 authors+ 0 author

Objectives: This study investigated the effects of three over-the-counter (OTC) whitening products, whitening pen (WP, Dazzling White Instant Whitening Pen, Dazzling White, Grand Rapids, MI, USA), whitening mouthwash (MW, Colgate Optic White, Colgate...

  • Article
  • Open Access
8 Citations
3,804 Views
19 Pages

In this study, the surface laser treatment of a new type of dental biomaterial, a Ti-graphite composite, prepared by low-temperature powder metallurgy, was investigated. Different levels of output laser power and the scanning speed of the fiber nanos...

(This article belongs to the Section Biomedical Biomaterials)
  • Article
  • Open Access
52 Citations
8,176 Views
17 Pages

30 October 2023

With the developments in digital dentistry in recent years, subtractive and additive manufacturing and materials have emerged for the production of dental restoration. Novel permanent composite-based restorative materials are also among these materia...

(This article belongs to the Special Issue Biotechnology Applied to Dentistry and Oral Maxillofacial Surgery)
  • Article
  • Open Access
14 Citations
3,845 Views
11 Pages

27 August 2021

A new category of commercial bulk fill composite resins (CRs) enables the placement of 4-mm-thick layers as an alternative to the traditional time-consuming incremental technique. The purpose of the present study was to compare the efficiency of the...

(This article belongs to the Special Issue Antimicrobial Materials with Medical Applications)
  • Systematic Review
  • Open Access
5 Citations
5,599 Views
11 Pages

1 March 2024

The objective was to systematically review studies that evaluated the effect of charcoal-based dentifrices (CbDs) and conventional whitening toothpastes (CWTs) on the color stability (CS) and/or surface roughness (SR) of composite resin (CR). The que...

(This article belongs to the Special Issue Feature Papers to Celebrate the First Impact Factor of Dentistry Journal)
  • Article
  • Open Access
26 Citations
5,731 Views
10 Pages

9 March 2018

This paper describes a study of the quantify surface roughness of experimentally manufactured particleboards and sandwiched panels having fibers on the surface layers. Surface quality of specimens before and after being overlaid with thin melamine im...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
7 Citations
3,658 Views
16 Pages

4 September 2024

In this study, we performed milling machining on carbon-epoxy polymer composites and jute-epoxy composites using a CNC vertical machining center. We focused on spindle speed, feed rate, depth of cut, and flute number and analyzed the cutting force an...

(This article belongs to the Section Composites Modelling and Characterization)
  • Article
  • Open Access
4 Citations
1,631 Views
13 Pages

15 October 2025

Background/Objectives: Composite resins are widely used restorative materials, but their surface properties may be altered by bleaching procedures. This study aimed to compare the effects of two bleaching techniques—light-activated (zoom) and d...

(This article belongs to the Section Dental Materials)
  • Article
  • Open Access
35 Citations
5,841 Views
11 Pages

12 January 2021

Objective: To evaluate and compare the surface roughness and gloss of a DMA-free composite and Bis-GMA-free composite with a DMA-based composite before and after toothbrushing simulation. Materials and Methods: Fifteen dimensionally standardised comp...

  • Article
  • Open Access
4 Citations
1,338 Views
17 Pages

4 February 2026

This study investigates the influence of hybrid additives and cutting parameters on the surface roughness (Ra) of drilled Glass Fiber Reinforced Polymer (GFRP) composites. Nine composite panels were fabricated with varying concentrations of wax (0%,...

(This article belongs to the Section Polymer Composites)
  • Communication
  • Open Access
8 Citations
3,999 Views
12 Pages

31 October 2019

The objective of this experimental study was to evaluate the surface roughness and hardness of laminated wood-based composite panels as a function of exposure to high relative humidity (RH). All samples were conditioned in a room having a temperature...

(This article belongs to the Special Issue Coating—A Sustainable Future)
  • Article
  • Open Access
15 Citations
2,985 Views
12 Pages

19 October 2021

Graphite/polymer composites are brittle materials that are prone to producing cracks and concavities on machined surfaces, and their surface quality shows greater randomness. This work aims to overcome the large fluctuations in the machined surface q...

(This article belongs to the Section Materials Processes)
  • Article
  • Open Access
37 Citations
5,224 Views
12 Pages

Varying the Polishing Protocol Influences the Color Stability and Surface Roughness of Bulk-Fill Resin-Based Composites

  • Filipa Freitas,
  • Teresa Pinheiro de Melo,
  • António HS Delgado,
  • Paulo Monteiro and ,
  • João Rua,
  • Luís Proença,
  • Jorge Caldeira,
  • Ana Mano Azul and
  • José João Mendes
  • + 4 authors+ 0 author

Surface properties of composites such as roughness and color impact periodontal health and aesthetic outcomes. Novel bulk-fill composites with improved functionality are being introduced and, in light of the existing variety of finishing/polishing pr...

  • Article
  • Open Access
23 Citations
8,189 Views
14 Pages

The Effect of Various Polishing Systems on the Surface Roughness of Two Resin Composites—An In Vitro Study

  • Marta Ewa Szczepaniak,
  • Michał Krasowski and
  • Elżbieta Bołtacz-Rzepkowska

28 June 2022

The long-term success of a composite restoration largely depends on its smoothness, which can be achieved by the appropriate polishing tools and material selection. The purpose of this study was to evaluate the surface roughness of two composite mate...

(This article belongs to the Special Issue Advances and Innovations in Dental Materials and Coatings)
  • Article
  • Open Access
12 Citations
3,445 Views
12 Pages

Effect of an Effervescent Multivitamin on Color and Surface Roughness of Micro-Hybrid Dental Resin Composites

  • Bengü Doğu Kaya,
  • Pınar Yılmaz Atalı,
  • Seda Özmen,
  • Selinsu Öztürk and
  • Bilge Tarçın

24 February 2024

The use of multivitamins has become widespread globally, yet there is a scarcity of studies investigating their impact on resin composite restorations. This study aimed to evaluate the effect of an effervescent multivitamin tablet on micro-hybrid den...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
731 Views
14 Pages

Effect of Two-Step Polishing Systems on the Surface Roughness of Bulk Fill Resin Composites: An In-Vitro Study

  • Gabriela da Silva Chagas,
  • Gildo Coelho Santos,
  • Vahid Dehnavi,
  • Cesar Rogério Pucci and
  • Maria Jacinta Moraes Coelho Santos

28 February 2026

This study evaluated the effect of two-step polishing procedures on the surface roughness of bulk fill restorative materials. Disk-shaped specimens (10 × 1.5 mm) were prepared from four resin composites: Filtek One Bulk Fill (3M ESPE) and Tetri...

(This article belongs to the Special Issue Advanced Dental Biomaterials: Technologies and Applications)
  • Article
  • Open Access
1 Citations
953 Views
23 Pages

Effects of Surface Roughness and Interfacial Agents on Bond Performance of Geopolymer–Concrete Composites

  • Biao Lu,
  • Dekun Chen,
  • Weiliang Zhong,
  • Junxia Li and ,
  • Yunhan Zhang and
  • Lifeng Fan
  • + 1 author+ 0 author

9 December 2025

This study investigates the effects of surface roughness and interfacial agents on the bond performance of geopolymer–concrete composites (GCCs). Firstly, cement concrete substrates with four surface roughness conditions, including cast surface...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
10 Citations
2,618 Views
12 Pages

Understanding wire-cut electrical discharge machining (WEDM) parameters’ impact on surface roughness (Ra) is crucial for optimizing processes. This study uses artificial neural network (ANN) techniques to estimate the surface roughness of Al/Si...

(This article belongs to the Special Issue Characterization and Modeling of Composites, 4th Edition)
  • Article
  • Open Access
97 Citations
9,503 Views
13 Pages

Influence of the Titanium Implant Surface Treatment on the Surface Roughness and Chemical Composition

  • Ana Isabel Nicolas-Silvente,
  • Eugenio Velasco-Ortega,
  • Ivan Ortiz-Garcia,
  • Loreto Monsalve-Guil and ,
  • Javier Gil and
  • Alvaro Jimenez-Guerra
  • + 1 author+ 0 author

9 January 2020

The implant surface features affect the osseointegration process. Different surface treatment methods have been applied to improve the surface topography and properties. Trace of different elements may appear on the implant surface, which can modify...

(This article belongs to the Special Issue Materials in Implant Dentistry and Regenerative Medicine)
  • Article
  • Open Access
1 Citations
1,045 Views
21 Pages

10 December 2025

The objective of this study was to evaluate whether any coating material would have a beneficial influence on maintaining color stability and surface roughness and to what extent an uncoated resin composite can keep its original color. The study eval...

(This article belongs to the Special Issue Selected Papers from the 4th International Online Conference on Materials (IOCM 2025))
  • Article
  • Open Access
46 Citations
6,279 Views
15 Pages

The Microhardness and Surface Roughness Assessment of Bulk-Fill Resin Composites Treated with and without the Application of an Oxygen-Inhibited Layer and a Polishing System: An In Vitro Study

  • Ann Carrillo-Marcos,
  • Giuliany Salazar-Correa,
  • Leonor Castro-Ramirez,
  • Marysela Ladera-Castañeda and ,
  • Carlos López-Gurreonero,
  • Hernán Cachay-Criado,
  • Ana Aliaga-Mariñas,
  • Alberto Cornejo-Pinto,
  • Luis Cervantes-Ganoza and
  • César Félix Cayo-Rojas
  • + 5 authors+ 0 author

28 July 2022

The aim of this study was to assess the microhardness and surface roughness of bulk-fill resin composites treated with and without the application of an oxygen-inhibited layer (OIL) and a polishing system. This in vitro experimental study consisted o...

(This article belongs to the Special Issue Advanced Polymeric Composites in Dentistry: Synthesis, Properties, and Applications)
  • Article
  • Open Access
471 Views
16 Pages

9 September 2026

Highly filled flowable resin composites have been developed to improve the mechanical and esthetic performance of conventional flowable materials, but their long-term behavior under different aging conditions remains insufficiently characterized. Thi...

(This article belongs to the Special Issue Recent Development of Polymeric Materials for Dental Applications)
  • Article
  • Open Access
39 Citations
5,996 Views
28 Pages

1 September 2023

In recent years, fused deposition modeling (FDM) based on material extrusion additive manufacturing technology has become widely accepted as a cost-effective method for fabricating engineering components with net-shapes. However, the limited explorat...

(This article belongs to the Special Issue Mechanical and Physical Properties of 3D Printed Polymer Materials)
  • Article
  • Open Access
775 Views
13 Pages

22 February 2026

Background/Objectives: This study evaluated the effects of at-home bleaching on color stability (ΔE) and surface roughness (Ra) of a single-shade nanohybrid composite, an ORMOCER-based composite, and a conventional nanohybrid resin composite, a...

(This article belongs to the Special Issue Dental Materials Design and Application)
  • Article
  • Open Access
9 Citations
2,518 Views
15 Pages

Describing and Modeling Rough Composites Surfaces by Using Topological Data Analysis and Fractional Brownian Motion

  • Antoine Runacher,
  • Mohammad-Javad Kazemzadeh-Parsi,
  • Daniele Di Lorenzo,
  • Victor Champaney and ,
  • Nicolas Hascoet,
  • Amine Ammar and
  • Francisco Chinesta
  • + 2 authors+ 0 author

14 March 2023

Many composite manufacturing processes employ the consolidation of pre-impregnated preforms. However, in order to obtain adequate performance of the formed part, intimate contact and molecular diffusion across the different composites’ preform...

(This article belongs to the Special Issue Fiber Reinforced Thermoplastic Composites: Processing/Structure/Performance Inter-relationships)

of 54