Skip to Content

377 Results Found

  • Article
  • Open Access
24 Citations
4,566 Views
18 Pages

27 November 2020

Structural systems developed from novel materials that are more durable and less prone to maintenance during the service lifetime are in great demand. Due to many advantages such as being lightweight as well as having high strength, corrosion resista...

  • Article
  • Open Access
9 Citations
5,703 Views
13 Pages

18 February 2023

The performance of fiber-reinforced composite materials is significantly influenced by the mechanical properties of the yarns. Predictive simulations of the mechanical response of yarns are, thus, necessary for fiber-reinforced composite materials. T...

(This article belongs to the Special Issue New Research Trends for Textiles, a Bright Future)
  • Article
  • Open Access
5 Citations
2,862 Views
19 Pages

Mechanical Deformation Analysis of a Flexible Finger in Terms of an Improved ANCF Plate Element

  • Yu Xing,
  • Lei Liu,
  • Chao Liu,
  • Bo Li and ,
  • Zishen Wang,
  • Pengfei Li and
  • Erhu Zhang
  • + 2 authors+ 0 author

27 June 2022

In recent years, flexible continuum robots have been substantially developed. Absolute nodal coordinates formulation (ANCF) gives a feasible path for simulating the behavior of flexible robots. However, the model of finger-shaped robots is often rega...

(This article belongs to the Special Issue Bio-Inspired Smart Machines: Structure, Mechanisms and Applications)
  • Article
  • Open Access
4 Citations
3,597 Views
17 Pages

2 February 2024

Bending is one of the dominant material deformation mechanisms that occurs during the forming process of unidirectional (UD) thermoplastic tapes. Experimental characterization of the bending behavior at processing temperatures is crucial to obtaining...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Article
  • Open Access
7 Citations
2,141 Views
11 Pages

27 November 2025

Biocompatible electroactive hydrogels with bidirectional pH-responsive bending are important for the creation of biomedical actuators. This study developed chitosan/carboxymethylcellulose (CS/CMC) semi-interpenetrating networks (SIPNs) with different...

  • Article
  • Open Access
1,230 Views
16 Pages

13 July 2025

This paper primarily investigates the response and failure behavior of 6063-T5 aluminum alloy square tubes with varying outer side lengths under symmetric curvature-controlled cyclic bending in different bending directions. The response is characteri...

(This article belongs to the Special Issue Mechanical Structure Damage of Metallic Materials)
  • Article
  • Open Access
7 Citations
4,124 Views
14 Pages

Two-Way Shape Memory Effect of a Shape Memory Composite Strip

  • Haiyang Du,
  • Yongtao Yao,
  • Yang Liu and
  • Wei Zhao

8 April 2023

In this work, a NiTi shape memory alloy (SMA) wire was embedded into a rubber/shape memory polymer (SMP) soft matrix to form a composite strip with a two-way reversible bending behavior. First, the elastic moduli of SMA wire were characterized as inc...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
4 Citations
4,126 Views
18 Pages

Indentation Measurement in Thin Plates under Bending Using 3D Digital Image Correlation

  • Juan-Antonio Almazán-Lázaro,
  • Elías López-Alba,
  • Luis Rubio-García and
  • Francisco-Alberto Díaz-Garrido

17 March 2021

In the current paper, a novel experimental methodology to characterize the contact behavior on thin plates under bending is presented. The method is based on the experimental measurement of the indentation observed during contact experiments. Tests w...

(This article belongs to the Special Issue Time-Series Measurements of 3D Shape and Deformation Using Image Analysis)
  • Article
  • Open Access
1,711 Views
17 Pages

Influence of Tool Geometry, Straightening Strategy and Tool Clearance in Thin Wire Punch-Bending

  • Ankit Kumar Pandey,
  • Henning Peters,
  • Tim Rostek and
  • Werner Homberg

In punch-bending of thin stainless steel components, the final product angle is significantly influenced by springback after process completion. In the present study, an attempt has been made to investigate the effect of wire straightening strategies...

  • Article
  • Open Access
1 Citations
4,526 Views
23 Pages

28 August 2025

Pre-stacked uncured metal–fiber-reinforced polymer (FRP) laminates, which are critical for aerospace components like double-curved fuselage panels, wing ribs, and engine nacelles, exhibit better deformation behavior than their fully cured count...

(This article belongs to the Special Issue Manufacturing, Simulation and Process Optimization of High-Performance Polymers and Their Composites)
  • Article
  • Open Access
1 Citations
1,712 Views
19 Pages

28 October 2025

Understanding the microstructure–property relationship in aluminum extrusions is crucial to leverage their potential in automotive lightweighting. The sensitivity of the processing history to the microstructure and through-thickness variations...

(This article belongs to the Section Metal Failure Analysis)
  • Article
  • Open Access
10 Citations
6,008 Views
16 Pages

Modeling Fracture Formation, Behavior and Mechanics of Polymeric Materials: A Biomedical Implant Perspective

  • Quazi Md. Zobaer Shah,
  • Md. Arefin Kowser,
  • Mohammad Asaduzzaman Chowdhury,
  • Muhammad Tariq Saeed Chani and ,
  • Khalid A. Alamry,
  • Nayem Hossain and
  • Mohammed M. Rahman
  • + 2 authors+ 0 author

17 January 2022

In industrial applications where contact behavior of materials is characterized, fretting-associated fatigue plays a vital role as a failure agitator. While considering connection, it encounters friction. Biomaterials like polytetrafluoroethylene (PT...

(This article belongs to the Special Issue Characterization and Modelling of Composites, Volume II)
  • Article
  • Open Access
2 Citations
1,776 Views
20 Pages

Experimental and Numerical Modeling of Bending Characteristics of Fir and Black Pine Wood from Different Forest Regions in Türkiye

  • Fatih Kurul,
  • Hızır Volkan Görgün,
  • Sedanur Şeker,
  • Tülay Yılmaz and ,
  • Türker Dündar and
  • Nadir Ayrilmis
  • + 1 author+ 0 author

19 May 2025

The bending test is a good indicator of wood characterization, including compression, tension, and shear stresses. Therefore, many studies have been published on bending tests for wood. Its heterogeneous structure, anisotropic behavior during the phy...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
111 Citations
11,483 Views
20 Pages

Application-Oriented Chemical Optimization of a Metakaolin Based Geopolymer

  • Claudio Ferone,
  • Francesco Colangelo,
  • Giuseppina Roviello,
  • Domenico Asprone and ,
  • Costantino Menna,
  • Alberto Balsamo,
  • Andrea Prota,
  • Raffaele Cioffi and
  • Gaetano Manfredi
  • + 4 authors+ 0 author

10 May 2013

In this study the development of a metakaolin based geopolymeric mortar to be used as bonding matrix for external strengthening of reinforced concrete beams is reported. Four geopolymer formulations have been obtained by varying the composition of th...

(This article belongs to the Special Issue Geopolymers and Geopolymeric Materials)
  • Article
  • Open Access
748 Views
24 Pages

15 August 2026

This paper systematically investigates the structural design and numerical characterization of ultra-compact low-loss waveguide bends on lithium niobate-on-insulator (LNOI) thin films via 3D-FDTD simulations. Six 90° bend architectures are analyz...

(This article belongs to the Special Issue Advances in Nanophotonics and Metasurface)
  • Review
  • Open Access
122 Views
35 Pages

Strain Localization, Damage Evolution, and Fracture Mechanisms in Sheet-Metal Bending: A Review

  • Wenjun Huang,
  • Zheng Chen,
  • Dajin Liu,
  • Zipan Chen and ,
  • Mu Yang,
  • Shoudong Chen and
  • Jing Qin
  • + 2 authors+ 0 author

10 November 2026

Sheet-metal bending produces pronounced through-thickness strain gradients and localized deformation. The resulting damage and fracture depend on microstructure, specimen geometry, loading path, and failure criterion. This review examines bending con...

  • Article
  • Open Access
28 Citations
6,998 Views
20 Pages

Damping Characterization of Hybrid Carbon Fiber Elastomer Metal Laminates using Experimental and Numerical Dynamic Mechanical Analysis

  • Vincent Sessner,
  • Alexander Jackstadt,
  • Wilfried V. Liebig,
  • Luise Kärger and
  • Kay A. Weidenmann

Lightweight structures which consist to a large extent of carbon fiber reinforced plastics (CFRP), often lack sufficient damping behavior. This also applies to hybrid laminates such as fiber metal laminates made of CFRP and aluminum. Since they are u...

  • Article
  • Open Access
8 Citations
2,467 Views
11 Pages

1 October 2024

We report a computational study of the bending deformation of two-dimensional nanoribbons by classical molecular dynamics methods. Two-dimensional double transition metal carbides, together with monometallic ones, belong to the family of novel nanoma...

(This article belongs to the Special Issue The Way Forward in MXenes Materials)
  • Article
  • Open Access
420 Views
17 Pages

Experimental and Analytical Investigation of Transverse Bending Resistance in Steel Threaded Joints

  • Maurizio Arena,
  • Vincenzo Raiola,
  • Francesco Spinaci,
  • Mario Miano and ,
  • Martina Castaldo and
  • Francesco Bocchetto
  • + 1 author+ 0 author

4 June 2026

Rod ends are critical structural components primarily designed to sustain axial loads in mechanical and aeronautical assemblies. However, operational conditions may involve transverse loading, which induces significant bending stresses concentrated i...

(This article belongs to the Special Issue Steel Structures: Modelling, Experiments and Applications)
  • Feature Paper
  • Article
  • Open Access
4 Citations
3,939 Views
12 Pages

Experimental and Simulation Analysis of Effects of Laser Bending on Microstructures Applied to Advanced Metallic Alloys

  • Esteban Ramos-Moore,
  • Joaquín Hoffmann,
  • Rafael H. M. Siqueira,
  • Sheila Medeiros de Carvalho and ,
  • Milton S. Fernandes de Lima and
  • Diego J. Celentano
  • + 1 author+ 0 author

21 February 2021

The aim of this work is the analysis of laser beam forming (LBF) in the bending of two relevant materials used in the transportation industry—interstitial-free (IF) steel and AA6013 high-strength aluminum alloy. Our experiments and numerical simulati...

(This article belongs to the Special Issue Laser Processing of Metals and Alloys)
  • Feature Paper
  • Article
  • Open Access
16 Citations
5,719 Views
21 Pages

Fabrication and Characterization of Fiber-Reinforced Composite Sandwich Structures Obtained by Fused Filament Fabrication Process

  • George Razvan Buican,
  • Sebastian-Marian Zaharia,
  • Mihai Alin Pop,
  • Lucia-Antoneta Chicos and ,
  • Camil Lancea,
  • Valentin-Marian Stamate and
  • Ionut Stelian Pascariu
  • + 2 authors+ 0 author

The application of fused filament fabrication processes is rapidly expanding in many domains such as aerospace, automotive, medical, and energy, mainly due to the flexibility of manufacturing structures with complex geometries in a short time. To imp...

(This article belongs to the Special Issue Surface Modification for Additive Manufacturing: Materials, Processing, Applications and Future Challenges)
  • Article
  • Open Access
8 Citations
3,200 Views
12 Pages

Assembly of Surface-Mounted Devices on Flexible Substrates by Isotropic Conductive Adhesive and Solder and Lifetime Characterization

  • Rafat Saleh,
  • Sophie Schütt,
  • Maximilian Barth,
  • Thassilo Lang and ,
  • Wolfgang Eberhardt and
  • André Zimmermann
  • + 1 author+ 0 author

1 August 2022

The assembly of passive components on flexible electronics is essential for the functionalization of circuits. For this purpose, adhesive bonding technology by isotropic conductive adhesive (ICA) is increasingly used in addition to soldering processe...

(This article belongs to the Special Issue Structural Analyses and Designs for Flexible/Stretchable Electronics)
  • Article
  • Open Access
1 Citations
1,804 Views
19 Pages

7 March 2025

Leaf spring-type flexible hinges serve as critical transmission components in kilogram quantization energy balance systems. Investigating their bending behavior is crucial for enhancing measurement accuracy and ensuring structural reliability. This w...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
26 Citations
6,329 Views
17 Pages

Effect of Post-Cure on the Static and Viscoelastic Properties of a Polyester Resin

  • Marco P. Silva,
  • Paulo Santos,
  • João M. Parente,
  • Sara Valvez and ,
  • Paulo N. B. Reis and
  • Ana P. Piedade
  • + 1 author+ 0 author

26 August 2020

This work intends to study the effect of the curing parameters on the mechanical properties of a polyester resin without a complete curing reaction process. For this purpose, cures at room temperature, 40 °C, and 60 °C, and post-cures at 40 &...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
10 Citations
5,345 Views
18 Pages

Alginate Hydrogels Reinforced by Dehydration under Stress—Application to a Soft Magnetic Actuator

  • Alberto Leon-Cecilla,
  • Francisco J. Vazquez-Perez,
  • Cristina Gila-Vilchez,
  • Luis Álvarez de Cienfuegos and
  • Modesto T. Lopez-Lopez

3 January 2023

We investigated the effect of partial dehydration under mechanical stress in the properties of alginate hydrogels. For this aim, we characterized the mechanical properties of the hydrogels under tensile and shear stress, as well as their swelling beh...

(This article belongs to the Special Issue Biosoursed and Bioinspired Gels for Biomedical Applications)
  • Article
  • Open Access
685 Views
12 Pages

The effective bending stiffness formula for cross-sections of timber–concrete composite (TCC) beams was derived under semi-sinusoidal loading condition in Eurocode 5; however, this formula does not account for the non-uniform distribution of be...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
1 Citations
1,197 Views
29 Pages

An Experimental–Numerical Framework for Springback Prediction and Angle Compensation in Air Bending with Additively Manufactured Polymer Tools

  • Vesna Mandic,
  • Marko Delic,
  • Dragan Adamovic,
  • Dusan Arsic and ,
  • Nada Ratkovic,
  • Djordje Ivkovic and
  • Andjelka Ilic
  • + 2 authors+ 0 author

Additive manufacturing of polymer tools represents a promising alternative to conventional steel tooling for low-force and low-volume sheet metal air bending. However, accurate prediction of sheet springback and the resulting deviation of the bending...

  • Article
  • Open Access
34 Citations
5,749 Views
21 Pages

Underwater Local Cavity Welding of S460N Steel

  • Jacek Tomków,
  • Anna Janeczek,
  • Grzegorz Rogalski and
  • Adrian Wolski

4 December 2020

In this paper, a comparison of the mechanical properties of high-strength low-alloy S460N steel welded joints is presented. The welded joints were made by the gas metal arc welding (GMAW) process in the air environment and water, by the local cavity...

(This article belongs to the Special Issue Underwater Processing of Materials)
  • Article
  • Open Access
3 Citations
1,578 Views
37 Pages

Numerical Analysis of the Three-Roll Bending Process of 6061-T6 Aluminum Profiles with Multiple Bending Radii Using the Finite Element Method

  • Mauricio da Silva Moreira,
  • Carlos Eduardo Marcos Guilherme,
  • João Henrique Corrêa de Souza,
  • Elizaldo Domingues dos Santos and
  • Liércio André Isoldi

1 October 2025

The present work numerically investigates the mechanical behavior of six 6061-T6 aluminum profiles during roll bending, considering, in two specific cases, the application of the process in different bending directions (vertical and horizontal), tota...

(This article belongs to the Special Issue Advances in Lightweight Material Forming Technology)
  • Article
  • Open Access
9 Citations
4,307 Views
18 Pages

26 April 2024

Since sheet metal exhibits significant anisotropy in processing and forming, which has a significant impact on its performance during processing, forming, and use, we explore the anisotropic behavior of materials in the forming process of sheet metal...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
4 Citations
3,238 Views
18 Pages

13 July 2020

This work proposes a novel methodology for the complete characterization of fiber reinforced concrete (FRC). The method includes bending tests of prismatic notched specimens, based on the Standards for FRC, tensile and pure shear tests. The values ad...

(This article belongs to the Special Issue Advances on Structural Engineering)
  • Article
  • Open Access
98 Citations
12,265 Views
22 Pages

30 July 2015

Although the steel slit dampers commonly utilized for aseismic design approach can dissipate considerable energy created by the yielding of base materials, large residual deformation may happen in the entire frame structure. After strong external exc...

  • Article
  • Open Access
7 Citations
1,351 Views
34 Pages

Geometrically Optimized FDM-Printed Conductive TPU Bend Sensors for Hand Rehabilitation

  • Ahmet Özkurt,
  • Damla Gürkan Kuntalp,
  • Ozan Kayacan,
  • Özlem Kayacan and
  • Selnur Narin Aral

9 April 2026

Flexible resistive bend sensors are essential for monitoring human movement in smart rehabilitation and soft robotics. However, widespread adoption is currently hindered by a trade-off between the high cost of metal-film technologies and the performa...

(This article belongs to the Section Sensors Development)
  • Article
  • Open Access
6 Citations
1,880 Views
18 Pages

16 May 2024

With the continuous improvement in the strength of medium-thick plate materials, the hot straightening of plates at high temperatures is increasingly influencing the final defect characteristics of products. In the high-temperature hot straightening...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
8 Citations
3,167 Views
26 Pages

28 April 2023

The direct tensile test (DTT) is the most recommended test to determine the tensile behavior of fiber-reinforced concrete (FRC). However, this test is challenging to perform. Several studies have investigated inverse analysis to determine this behavi...

  • Article
  • Open Access
71 Citations
13,996 Views
11 Pages

Mechanical Properties of Flexible TPU-Based 3D Printed Lattice Structures: Role of Lattice Cut Direction and Architecture

  • Victor Beloshenko,
  • Yan Beygelzimer,
  • Vyacheslav Chishko,
  • Bogdan Savchenko and ,
  • Nadiya Sova,
  • Dmytro Verbylo,
  • Andrei Voznyak and
  • Iurii Vozniak
  • + 3 authors+ 0 author

3 September 2021

This study addresses the mechanical behavior of lattice materials based on flexible thermoplastic polyurethane (TPU) with honeycomb and gyroid architecture fabricated by 3D printing. Tensile, compression, and three-point bending tests were chosen as...

(This article belongs to the Special Issue Additive Manufacturing of Bio and Synthetic Polymers)
  • Article
  • Open Access
3 Citations
1,293 Views
21 Pages

Thermographic Investigation of Elastocaloric Behavior in Ni-Ti Sheet Elements Under Cyclic Bending

  • Saeed Danaee Barforooshi,
  • Gianmarco Bizzarri,
  • Girolamo Costanza,
  • Stefano Paoloni and ,
  • Ilaria Porroni and
  • Maria Elisa Tata
  • + 1 author+ 0 author

29 July 2025

Growing environmental concerns have driven increased interest in solid-state thermal technologies based on the elastocaloric properties of shape memory alloys (SMA). This work examines the elastocaloric effect (eCE) in Ni-Ti SMA sheets subjected to c...

(This article belongs to the Special Issue Technology and Applications of Shape Memory Materials)
  • Article
  • Open Access
8 Citations
3,463 Views
15 Pages

A Finite Element Analysis of Cold Deep Drawing of Al Alloy Considering Friction Condition and Corner Design of Plunger

  • Warda Bahanan,
  • Siti Fatimah,
  • Jae Hoon Go,
  • Jeong Moo Oh and ,
  • Min Jun Kim,
  • Myung Jae Kim,
  • Jee-Hyun Kang,
  • Dong-Ju Kim,
  • I Putu Widiantara and
  • Young Gun Ko
  • + 5 authors+ 0 author

10 September 2023

This study presents an innovative methodology that integrates experimental investigations with finite element simulations to ascertain the validity and reliability of Al 3104 sheet metals during cold deep drawing. Focusing on the nose plunger radius...

  • Article
  • Open Access
3 Citations
983 Views
19 Pages

Mechanical Stability of Amorphous Silicon Thin-Film Devices on Polyimide for Flexible Sensor Platforms

  • Giulia Petrucci,
  • Fabio Cappelli,
  • Martina Baldini,
  • Francesca Costantini and ,
  • Augusto Nascetti,
  • Giampiero de Cesare,
  • Domenico Caputo and
  • Nicola Lovecchio
  • + 3 authors+ 0 author

4 February 2026

Hydrogenated amorphous silicon (a-Si:H) is a mature thin-film technology for large-area devices and thin-film sensors, and its low-temperature growth via Plasma-Enhanced Chemical Vapor Deposition (PECVD) makes it particularly suitable for biomedical...

(This article belongs to the Special Issue Recent Innovations in Wearable Sensors for Biomedical Approaches)
  • Article
  • Open Access
14 Citations
4,034 Views
13 Pages

Underwater Bending Actuator Based on Integrated Anisotropic Textile Materials and a Conductive Hydrogel Electrode

  • Sascha Pfeil,
  • Alice Mieting,
  • Rebecca Grün,
  • Konrad Katzer and ,
  • Johannes Mersch,
  • Cornelia Breitkopf,
  • Martina Zimmermann and
  • Gerald Gerlach
  • + 3 authors+ 0 author

14 October 2021

Electroactive polymers (EAPs), especially dielectric elastomer actuators (DEAs), belong to a very promising and emerging class of functional materials. While DEAs are mostly utilized to rely on carbon-based electrodes, there are certain shortcomings...

  • Article
  • Open Access
2 Citations
1,863 Views
23 Pages

17 September 2024

Longitudinal ordinary rebars are discontinuous at the joints of precast concrete segmental bridges (PCSBs), which can open under tensile stresses induced by bending moments. This will lead to durability issues with the joints. To improve the bending...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
1,093 Views
18 Pages

Buckling Analysis of Extruded Polystyrene Columns with Various Slenderness Ratios

  • Hiroshi Yoshihara,
  • Koki Yoshimura,
  • Masahiro Yoshinobu and
  • Makoto Maruta

11 November 2025

Extruded polystyrene (XPS) has recently been used for construction such as in walls, and floors. When it is used for walls, axial load is inevitably applied along the length direction, raising concerns of collapse owing to buckling deformation. To ad...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
2 Citations
2,741 Views
15 Pages

Study on the Mechanical Properties of Carbon Fabric/Polyetherketoneketone Composites Under Different Environmental Conditions

  • Xiangyu Xu,
  • Baoyan Zhang,
  • Fenghui Shi,
  • Kai Liu and ,
  • Gongqiu Peng and
  • Junpeng Gao
  • + 1 author+ 0 author

22 April 2025

Carbon fabric reinforced polyetherketoneketone (CFF/PEKK) composites have garnered significant attention from researchers due to their superior properties and have been successfully applied in various engineering fields. Environmental conditions are...

(This article belongs to the Special Issue Editorial Board Members' Collection Series: Polymer Physics and Theory—2nd Edition)
  • Article
  • Open Access
6 Citations
2,475 Views
19 Pages

Optimizing Polymer-Stabilized Raw Earth Composites with Plant Fibers Reinforcement for Historic Building Rehabilitation

  • Souad Menadi,
  • Yazid Hadidane,
  • Mohammed Benzerara,
  • Messaoud Saidani and ,
  • Morteza Khorami,
  • Redjem Belouettar,
  • Fayçal Slimani,
  • Nadia Gouider and
  • Souhila Rehab-Bekkouche
  • + 4 authors+ 0 author

24 October 2023

This research focuses on the optimization of formulation, characterization, and damage analysis of plant fiber-reinforced polyester resin composites (jute and date palm). To better understand the characteristics and mechanical behavior of these mater...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
3 Citations
2,019 Views
19 Pages

22 April 2024

Structures composed of aviation aluminium alloys, characterized by their limited rigidity and thin-walled configurations, frequently exhibit deformation after processing. This paper presents an investigation into T-shaped components fabricated from p...

(This article belongs to the Section Metal Failure Analysis)
  • Article
  • Open Access
20 Citations
6,532 Views
14 Pages

8 January 2020

This paper reports an active catheter-tip device functionalized by integrating a temperature-responsive smart polymer onto a microfabricated flexible heater strip, targeting at enabling the controlled steering of catheters through complex vascular ne...

(This article belongs to the Special Issue 10th Anniversary of Micromachines)
  • Article
  • Open Access
686 Views
16 Pages

9 March 2026

Although the cyclic bending behavior of circular and elliptical steel tubes has been widely studied, the combined effects of major-to-minor axis length ratio and curvature ratio on the deformation characteristics and buckling life of galvanized steel...

(This article belongs to the Special Issue Plastic Deformation, Strengthening and Toughening of Advanced Metallic Materials (3rd Edition))
  • Article
  • Open Access
13 Citations
2,856 Views
15 Pages

3 March 2023

The microscopic anisotropy of shale has an important impact on its mechanical properties and crack behavior, so it is essential to understand the microscopic origin of anisotropic growth with a more effective laboratory work scheme. Uniaxial compress...

(This article belongs to the Special Issue Advances in Petroleum Geology and Unconventional Oil and Gas)
  • Article
  • Open Access
222 Views
20 Pages

18 September 2026

This study presents an entropy-based framework for segmenting and characterizing the deformation behavior of AZ31B magnesium alloy sheets using acoustic emission (AE) signals obtained during tensile and V-bending tests. Shannon entropy was calculated...

(This article belongs to the Special Issue Advances in Lightweight Alloys: Microstructure, Mechanical Properties and Applications)
  • Article
  • Open Access
3 Citations
3,048 Views
20 Pages

On the Residual Lifetime and Inactivity Time in Mixtures

  • Francisco Germán Badía and
  • María Dolores Berrade

6 August 2022

In this paper we study the aging characteristics in mixtures of distributions, providing characterizations for their derivatives that explain the smooth behavior of the mixture. The classical preservation results for the reversed hazard rate, mean re...

(This article belongs to the Special Issue Probability Theory and Stochastic Modeling with Applications)

of 8