Skip to Content

1,218 Results Found

  • Article
  • Open Access
6 Citations
2,582 Views
18 Pages

Simulating Two-Phase Seepage in Undisturbed Soil Based on Lattice Boltzmann Method and X-ray Computed Tomography Images

  • Zhenliang Jiang,
  • Yiqian Lin,
  • Xian Chen,
  • Shanghui Li and ,
  • Peichen Cai and
  • Yun Que
  • + 1 author+ 0 author

26 June 2024

The two-phase seepage fluid (i.e., air and water) behaviors in undisturbed granite residual soil (U-GRS) have not been comprehensively studied due to a lack of accurate and representative models of its internal pore structure. By leveraging X-ray com...

(This article belongs to the Special Issue Toward Green and Intelligent Transportation Infrastructure: Road Non-destructive Testing and Structural Health Monitoring Technologies)
  • Article
  • Open Access
11 Citations
4,875 Views
10 Pages

Lung Dual-Energy CT Perfusion Blood Volume as a Marker of Severity in Chronic Thromboembolic Pulmonary Hypertension

  • Salim A. Si-Mohamed,
  • Léa Zumbihl,
  • Ségolène Turquier,
  • Sara Boccalini and ,
  • Jean-Francois Mornex,
  • Philippe Douek,
  • Vincent Cottin and
  • Loic Boussel
  • + 3 authors+ 0 author

17 February 2023

In chronic thromboembolic pulmonary hypertension (CTEPH), assessment of severity requires right heart catheterization (RHC) through cardiac index (CI). Previous studies have shown that dual-energy CT allows a quantitative assessment of the lung perfu...

(This article belongs to the Special Issue Quantitative Imaging in Computed Tomography)
  • Article
  • Open Access
8 Citations
3,102 Views
16 Pages

Quantitative Airway Assessment of Diffuse Idiopathic Pulmonary Neuroendocrine Cell Hyperplasia (DIPNECH) on CT as a Novel Biomarker

  • Cormac O’Brien,
  • John A. Duignan,
  • Margaret Gleeson,
  • Orla O’Carroll and ,
  • Alessandro N. Franciosi,
  • Dermot O’Toole,
  • Aurelie Fabre,
  • Rachel K. Crowley,
  • Cormac McCarthy and
  • David J. Murphy
  • + 6 authors+ 1 author

8 December 2022

Objectives: Diffuse idiopathic pulmonary neuroendocrine cell hyperplasia (DIPNECH) occurs due to abnormal proliferation of pulmonary neuroendocrine cells. We hypothesized that performing a quantitative analysis of airway features on chest CT may reve...

(This article belongs to the Special Issue Quantitative and Intelligent Analysis of Medical Imaging)
  • Review
  • Open Access
21 Citations
7,645 Views
28 Pages

Approaches to Configuration Determinations of Flexible Marine Natural Products: Advances and Prospects

  • Zong-Qing Huo,
  • Feng Zhu,
  • Xing-Wang Zhang,
  • Xiao Zhang and ,
  • Hong-Bao Liang,
  • Jing-Chun Yao,
  • Zhong Liu,
  • Gui-Min Zhang,
  • Qing-Qiang Yao and
  • Guo-Fei Qin
  • + 5 authors+ 0 author

19 May 2022

Flexible marine natural products (MNPs), such as eribulin and bryostatin, play an important role in the development of modern marine drugs. However, due to the multiple chiral centers and geometrical uncertainty of flexible systems, configuration det...

(This article belongs to the Section Structural Studies on Marine Natural Products)
  • Article
  • Open Access
6 Citations
2,080 Views
20 Pages

17 January 2025

This paper investigates the effects of particle morphology (PM) and particle size distribution (PSD) on the micro-macro mechanical behaviours of granular soils through a novel X-ray micro-computed tomography (μCT)-based discrete element method (DE...

  • Article
  • Open Access
8 Citations
2,215 Views
36 Pages

No Reproducibility, No Progress: Rethinking CT Benchmarking

  • Dmitry Polevoy,
  • Danil Kazimirov,
  • Marat Gilmanov and
  • Dmitry Nikolaev

2 October 2025

Reproducibility is a cornerstone of scientific progress, yet in X-ray computed tomography (CT) reconstruction, it remains a critical and unresolved challenge. Current benchmarking practices in CT are hampered by the scarcity of openly available datas...

(This article belongs to the Special Issue Tools and Techniques for Improving Radiological Imaging Applications)
  • Article
  • Open Access
22 Citations
9,963 Views
17 Pages

Correlation of X-Ray Computed Tomography with Quantitative Nuclear Magnetic Resonance Methods for Pre-Clinical Measurement of Adipose and Lean Tissues in Living Mice

  • Matthew N. Metzinger,
  • Bernadette Miramontes,
  • Peng Zhou,
  • Yueying Liu and ,
  • Sarah Chapman,
  • Lucy Sun,
  • Todd A. Sasser,
  • Giles E. Duffield,
  • M. Sharon Stack and
  • W. Matthew Leevy
  • + 5 authors+ 0 author

8 October 2014

Numerous obesity studies have coupled murine models with non-invasive methods to quantify body composition in longitudinal experiments, including X-ray computed tomography (CT) or quantitative nuclear magnetic resonance (QMR). Both microCT and QMR ha...

(This article belongs to the Special Issue Biomedical Sensors and Systems)
  • Article
  • Open Access
5 Citations
4,046 Views
16 Pages

Stereoisomeric Tris-BINOL-Menthol Bulky Monophosphites: Synthesis, Characterisation and Application in Rhodium-Catalysed Hydroformylation

  • Alexandre P. Felgueiras,
  • Fábio M. S. Rodrigues,
  • Rui M. B. Carrilho,
  • Pedro F. Cruz and ,
  • Vitor H. Rodrigues,
  • Tamás Kégl,
  • László Kollár and
  • Mariette M. Pereira
  • + 3 authors+ 0 author

19 March 2022

Four stereoisomeric monoether derivatives, based on axially chiral (R)- or (S)-BINOL bearing a chiral (+)- or (−)-neomenthyloxy group were synthesised and fully characterised by NMR spectroscopy and X-ray crystallography. The respective tris-mo...

(This article belongs to the Section Organic Chemistry)
  • Article
  • Open Access
23 Citations
4,473 Views
16 Pages

1 September 2019

In order to investigate the fatigue cracking resistance of engineered cementitious composites (ECC) used in in total life pavement, the semi-circular bending (SCB) test and improved three-point bending fatigue test (ITBF) were utilized in this study....

(This article belongs to the Special Issue Structural Performances of Concrete Composite Members: Experimental, Theoretical, Numerical Approaches)
  • Article
  • Open Access
3 Citations
3,646 Views
25 Pages

The relationships between the mechanical properties of foam concrete and its pore structure and cement slurry properties have been confirmed, but these relationships cannot be directly reflected just through experimental research. Thus, experiments a...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Review
  • Open Access
84 Citations
12,566 Views
23 Pages

Role of Computational Methods in Going beyond X-ray Crystallography to Explore Protein Structure and Dynamics

  • Ashutosh Srivastava,
  • Tetsuro Nagai,
  • Arpita Srivastava,
  • Osamu Miyashita and
  • Florence Tama

30 October 2018

Protein structural biology came a long way since the determination of the first three-dimensional structure of myoglobin about six decades ago. Across this period, X-ray crystallography was the most important experimental method for gaining atomic-re...

(This article belongs to the Special Issue Protein Structural Dynamics)
  • Article
  • Open Access
5 Citations
7,060 Views
17 Pages

Five Novel Polymorphs of Cardarine/GW501516 and Their Characterization by X-ray Diffraction, Computational Methods, Thermal Analysis and a Pharmaceutical Perspective

  • Alexandru Turza,
  • Petru Pascuta,
  • Marieta Muresan-Pop,
  • Liviu Mare and ,
  • Gheorghe Borodi and
  • Violeta Popescu
  • + 1 author+ 0 author

GW501516, also known by the name of cardarine, is a synthetic peroxisome-proliferator-activated receptor delta (PPR-δ) agonist agent developed for applications in the treatment of metabolic disorders and cardiovascular diseases. A broad polymor...

(This article belongs to the Special Issue Pharmaceutical Polymorphs and Cocrystals and Their In Vitro and In Vivo Evaluation)
  • Article
  • Open Access
5 Citations
2,786 Views
15 Pages

29 April 2024

Background and Objectives: In lumbar spine radiography, the oblique view is frequently utilized to assess the presence of spondylolysis and the morphology of facet joints. It is crucial to instantly determine whether the oblique angle is appropriate...

(This article belongs to the Special Issue Gamma and X-ray Technologies for Medical Research: Image Analysis and Disease Discovered)
  • Article
  • Open Access
7 Citations
2,685 Views
22 Pages

31 May 2023

This research investigates the influence of the pre-existing defects within concrete taken from the in-service irrigation structure on the strain distribution. The X-ray Computed Tomography (CT) technique is employed to investigate the internal concr...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
16 Citations
5,295 Views
21 Pages

29 July 2021

X-ray CT imaging provides a 3D view of a sample and is a powerful tool for investigating the internal features of porous rock. Reliable phase segmentation in these images is highly necessary but, like any other digital rock imaging technique, is time...

  • Interesting Images
  • Open Access
2 Citations
2,414 Views
4 Pages

Pedicle Screw Pseudofracture on Computed Tomography Secondary to Metal Artifact Reduction

  • Shuliang Ge,
  • Naresh Kumar and
  • James Thomas Patrick Decourcy Hallinan

Metal artifact reduction (MAR) algorithms are commonly used in computed tomography (CT) scans where metal implants are involved. However, MAR algorithms also have the potential to create new artifacts in reconstructed images. We present a case of a s...

(This article belongs to the Section Medical Imaging and Theranostics)
  • Article
  • Open Access
14 Citations
4,846 Views
23 Pages

8 April 2020

Mineral textural quantification methods have become critical in both geosciences and mineral processing as mineral texture is a critical factor contributing to ore variability. However, the lack of objective mineral texture classification has made qu...

(This article belongs to the Section Mineral Deposits)
  • Article
  • Open Access
3 Citations
4,008 Views
13 Pages

Improving a Rapid Alignment Method of Tomography Projections by a Parallel Approach

  • Francesco Guzzi,
  • George Kourousias,
  • Alessandra Gianoncelli,
  • Lorella Pascolo and ,
  • Andrea Sorrentino,
  • Fulvio Billè and
  • Sergio Carrato
  • + 2 authors+ 0 author

18 August 2021

The high resolution of synchrotron cryo-nano tomography can be easily undermined by setup instabilities and sample stage deficiencies such as runout or backlash. At the cost of limiting the sample visibility, especially in the case of bio-specimens,...

(This article belongs to the Special Issue X-ray Medical and Biological Imaging)
  • Article
  • Open Access
5 Citations
1,805 Views
16 Pages

Field Compaction Characteristics of Ultra-Thin Porous Friction Course Based on Laboratory Simulation

  • Xiaobo Du,
  • Hongwei Lin,
  • Mutian Sun,
  • Wenchang Liu and
  • Hongchao Zhang

25 June 2024

As a preventive maintenance treatment, the ultra-thin porous friction course (UPFC) has been widely recognized and used in road maintenance because of its excellent performance and cost effectiveness. The Marshall compaction method (MCM) has been ado...

(This article belongs to the Special Issue New Trends in Long-Life Road Infrastructures: Materials and Structures)
  • Article
  • Open Access
20 Citations
4,974 Views
23 Pages

10 May 2019

This paper presents an assessment of the condition of wood coming from a wharf timber sheet wall after 70 years of service in a (sea) water environment. Samples taken from the structure’s different zones, i.e., the zone impacted by waves and ch...

(This article belongs to the Special Issue Non-destructive Testing of Materials in Civil Engineering)
  • Article
  • Open Access
1,572 Views
14 Pages

Determination of the Optimal Landmark for Tube Thoracostomy in Trauma Patients: A Retrospective Study

  • Mina Lee,
  • Jaeik Jang,
  • Jae-Hyug Woo,
  • Hyuk Jun Yang and ,
  • Woo Sung Choi,
  • Jae Ho Jang and
  • Sung Youl Hyun
  • + 2 authors+ 0 author

25 October 2025

Background/Objectives: Accurate and prompt tube thoracostomy (TT) placement within the safety zone while avoiding diaphragmatic injury remains challenging, particularly in trauma patients with distorted thoracic anatomy. This study evaluated the accu...

(This article belongs to the Special Issue Clinical Advances in Trauma and Emergency Medicine)
  • Article
  • Open Access
46 Citations
6,379 Views
33 Pages

19 March 2020

Fluid flow characteristics are important to assess reservoir performance. Unfortunately, laboratory techniques are inadequate to know these characteristics, which is why numerical methods were developed. Such methods often use computed tomography (CT...

(This article belongs to the Special Issue Novel Acquisition and Analysis Methods for X-ray Micro-CT in Materials Sciences)
  • Article
  • Open Access
62 Citations
6,910 Views
16 Pages

10 July 2019

Mercury intrusion porosimetry (MIP) is questioned for possibly damaging the micro structure of cement-based materials (CBMs), but this theme still has a lack of quantitative evidence. By using X-ray computed tomography (XCT), this study reported an e...

(This article belongs to the Special Issue Non-destructive Testing of Materials in Civil Engineering)
  • Article
  • Open Access
2 Citations
4,598 Views
21 Pages

Chemistry of Spontaneous Alkylation of Methimazole with 1,2-Dichloroethane

  • Leo Štefan,
  • Ana Čikoš,
  • Robert Vianello,
  • Ivica Đilović and ,
  • Dubravka Matković-Čalogović and
  • Miljenko Dumić
  • + 1 author+ 0 author

21 November 2021

Spontaneous S-alkylation of methimazole (1) with 1,2-dichloroethane (DCE) into 1,2-bis[(1-methyl-1H-imidazole-2-yl)thio]ethane (2), that we have described recently, opened the question about its formation pathway(s). Results of the synthetic, NMR spe...

(This article belongs to the Special Issue Recent Advances in the Synthesis and Biological Studies of Five-Membered Azaheterocycle Derivatives)
  • Article
  • Open Access
5 Citations
4,143 Views
9 Pages

15 August 2021

The reconstruction of cone-beam computed tomography data using filtered back-projection algorithms unavoidably results in severe artefacts. We describe how the Direct Iterative Reconstruction of Computed Tomography Trajectories (DIRECTT) algorithm ca...

(This article belongs to the Special Issue X-ray Digital Radiography and Computed Tomography)
  • Article
  • Open Access
3 Citations
2,782 Views
18 Pages

Particle Size-and Structure-Dependent Breakage Behaviors of EnAM-Containing Slags

  • Simon Bahnmüller,
  • Paul Hirschberger,
  • Thu Trang Võ,
  • Cindytami Rachmawati and ,
  • Arno Kwade,
  • Urs Peuker,
  • Harald Kruggel-Emden and
  • Carsten Schilde
  • + 3 authors+ 0 author

19 February 2025

Slags containing critical minerals concentrated in artificial phases, so-called engineered artificial minerals (EnAMs), are a novel source of critical raw materials. To liberate the EnAMs, the slags need to be comminuted, reducing the size of the par...

(This article belongs to the Collection Engineered Artificial Minerals (EnAMs): A Geo-Metallurgical Tool to Recycle Critical Elements from Waste Streams: Synthesis, Characterization, Metallurgical and Mechanical Processing (SPP 2315))
  • Article
  • Open Access
95 Views
19 Pages

CT-Based 3D Reconstruction and CDEM Simulation of Mechanical Behavior in Conglomerates

  • Zehao Xu,
  • Zhixing Zhao,
  • Haijun Mao,
  • Ke Li and ,
  • Haiyang Zhao and
  • Jianru Gou
  • + 1 author+ 0 author

14 November 2026

The study of conglomerate mechanical properties is challenging due to their inherent heterogeneity and the limitations of conventional testing methods, which often yield highly scattered data. This research develops an integrated methodology combinin...

(This article belongs to the Section Process Control, Modeling and Optimization)
  • Article
  • Open Access
1 Citations
2,147 Views
14 Pages

Automated Restarting Fast Proximal Gradient Descent Method for Single-View Cone-Beam X-ray Luminescence Computed Tomography Based on Depth Compensation

  • Peng Gao,
  • Huangsheng Pu,
  • Tianshuai Liu,
  • Yilin Cao and ,
  • Wangyang Li,
  • Shien Huang,
  • Ruijing Li,
  • Hongbing Lu and
  • Junyan Rong
  • + 4 authors+ 0 author

Single-view cone-beam X-ray luminescence computed tomography (CB-XLCT) has recently gained attention as a highly promising imaging technique that allows for the efficient and rapid three-dimensional visualization of nanophosphor (NP) distributions in...

(This article belongs to the Special Issue Artificial Intelligence in Biomedical Imaging and Biomedical Signal Processing)
  • Article
  • Open Access
4 Citations
2,945 Views
13 Pages

Is Micro X-ray Computer Tomography a Suitable Non-Destructive Method for the Characterisation of Dental Materials?

  • Andreas Koenig,
  • Leonie Schmohl,
  • Johannes Scheffler,
  • Florian Fuchs and ,
  • Michaela Schulz-Siegmund,
  • Hans-Martin Doerfler,
  • Steffen Jankuhn and
  • Sebastian Hahnel
  • + 3 authors+ 0 author

14 April 2021

The aim of the study was to investigate the effect of X-rays used in micro X-ray computer tomography (µXCT) on the mechanical performance and microstructure of a variety of dental materials. Standardised bending beams (2 × 2 × 25 mm3) were forwarded...

(This article belongs to the Special Issue Overviews on the Progress of Polymeric Materials for Dental Applications)
  • Article
  • Open Access
174 Views
23 Pages

Chitosan-Based Nanocomposite for Tetracycline Removal

  • Gergana Kirova,
  • Margarita Stoytcheva,
  • Zdravka Velkova,
  • Georgi Avdeev and ,
  • Nikolay Zahariev and
  • Velizar Gochev
  • + 1 author+ 0 author

14 October 2026

The presence of antibiotic residues in aquatic environments poses a significant risk to water quality and public health, creating a need for effective and sustainable treatment technologies. In this study, a chitosan-based nanocomposite containing si...

(This article belongs to the Special Issue Sustainable Water Futures: Integrated Approaches for Water and Wastewater Treatment and Reuse)
  • Article
  • Open Access
12 Citations
4,026 Views
10 Pages

19 February 2020

Developments in 3D printing and CT scanning technologies have facilitated the imitation of natural wood structures. However, creating composites from the elementary features of anisotropic wood structures remains a new frontier. This paper aims to in...

(This article belongs to the Special Issue Progress in 3D Printing of Materials)
  • Article
  • Open Access
5 Citations
3,695 Views
20 Pages

X-ray Computed Tomography Method for Macroscopic Structural Property Evaluation of Active Twist Composite Blades

  • Joon H. Ahn,
  • Hyun J. Hwang,
  • Sehoon Chang,
  • Sung Nam Jung and ,
  • Steffen Kalow and
  • Ralf Keimer
  • + 1 author+ 0 author

30 November 2021

This paper describes an evaluation of the structural properties of the next-generation active twist blade using X-ray computed tomography (CT) combined with digital image processing. This non-destructive testing technique avoids the costly demolition...

(This article belongs to the Special Issue Rotorcraft)
  • Feature Paper
  • Article
  • Open Access
6 Citations
2,502 Views
16 Pages

Quantifying Soil Complexity Using Fisher Shannon Method on 3D X-ray Computed Tomography Scans

  • Domingos Aguiar,
  • Rômulo Simões Cezar Menezes,
  • Antonio Celso Dantas Antonino,
  • Tatijana Stosic and ,
  • Ana M. Tarquis and
  • Borko Stosic
  • + 1 author+ 0 author

19 October 2023

The conversion of native forest into agricultural land, which is common in many parts of the world, poses important questions regarding soil degradation, demanding further efforts to better understand the effect of land use change on soil functions....

(This article belongs to the Section Complexity)
  • Article
  • Open Access
22 Citations
8,741 Views
17 Pages

Exemplification of Detecting Gas Turbine Blade Structure Defects Using the X-ray Computed Tomography Method

  • Józef Błachnio,
  • Marek Chalimoniuk,
  • Artur Kułaszka,
  • Henryk Borowczyk and
  • Dariusz Zasada

X-ray computed tomography is more often applied in non-destructive testing the quality of construction elements significantly crucial for reliability and safety of device elements, machines and complex industrial systems. This article describes the c...

  • Article
  • Open Access
30 Citations
6,037 Views
20 Pages

23 December 2020

The inherent imbalance in the data distribution of X-ray security images is one of the most challenging aspects of computer vision algorithms applied in this domain. Most of the prior studies in this field have ignored this aspect, limiting their app...

(This article belongs to the Section Computing and Artificial Intelligence)
  • Article
  • Open Access
15 Citations
5,225 Views
16 Pages

Sinogram Inpainting with Generative Adversarial Networks and Shape Priors

  • Emilien Valat,
  • Katayoun Farrahi and
  • Thomas Blumensath

13 June 2023

X-ray computed tomography is a widely used, non-destructive imaging technique that computes cross-sectional images of an object from a set of X-ray absorption profiles (the so-called sinogram). The computation of the image from the sinogram is an ill...

(This article belongs to the Topic Artificial Intelligence in Medical Imaging and Image Processing)
  • Article
  • Open Access
11 Citations
4,629 Views
16 Pages

10 May 2021

Lab-based X-ray computed tomography (XCT) systems use X-ray sources that emit a polychromatic X-ray spectrum and detectors that do not detect all X-ray photons with the same efficiency. A consequence of using a polychromatic X-ray source is that beam...

(This article belongs to the Section Optical Sensors)
  • Article
  • Open Access
1,600 Views
13 Pages

Background/Objectives: X-ray computed tomography (XCT) is a powerful tool for volumetric imaging, where three-dimensional (3D) images are generated from a large number of individual X-ray projection images. However, collecting the required number of...

  • Article
  • Open Access
1 Citations
2,527 Views
15 Pages

The accurate calculation of the angle of refraction of X-rays passing through an object is essential in X-ray phase-contrast imaging. While the wave optics-based method is commonly employed to calculate the angle of refraction, it presents several li...

  • Article
  • Open Access
1 Citations
2,253 Views
16 Pages

Selection of X-ray Tube Settings for Relative Bone Density Quantification in the Knee Joint of Cats Using Computed Digital Absorptiometry

  • Joanna Bonecka,
  • Bernard Turek,
  • Krzysztof Jankowski,
  • Marta Borowska and ,
  • Tomasz Jasiński,
  • Katarzyna Skierbiszewska and
  • Małgorzata Domino
  • + 2 authors+ 0 author

5 September 2024

Bone mineral density (BMD) varies with aging and both systemic and local diseases; however, such evidence is lacking in feline medicine. This may be due to the need for general anesthesia in cats for direct BMD measurements using dual-energy X-ray ab...

(This article belongs to the Special Issue Image Analysis and Biomedical Sensors)
  • Article
  • Open Access
6 Citations
2,930 Views
23 Pages

24 February 2024

Medical professionals in thoracic medicine routinely analyze chest X-ray images, often comparing pairs of images taken at different times to detect lesions or anomalies in patients. This research aims to design a computer-aided diagnosis system that...

(This article belongs to the Section Sensing and Imaging)
  • Article
  • Open Access
9 Citations
6,086 Views
11 Pages

Mobile X-ray Outside the Hospital vs. X-ray at the Hospital Challenges Exposed in an Explorative RCT Study

  • Maria Toppenberg,
  • Thomas Christiansen,
  • Finn Rasmussen,
  • Camilla Nielsen and
  • Else Marie Damsgaard

Background: For frail patients, it may sometimes be preferable to carry out X-ray examinations at the patients’ own home. The general state of such patients may worsen due to transport and change of environment when transported for examination...

(This article belongs to the Section Healthcare Quality, Patient Safety, and Self-care Management)
  • Article
  • Open Access
3 Citations
4,991 Views
19 Pages

The Nature of Metal Artifacts in X-ray Computed Tomography and Their Reduction by Optimization of Tomography Systems Parameters

  • Sergey Pavlovich Osipov,
  • Sergei Vladimirovich Chakhlov,
  • Vadim Yurevich Zhvyrblia,
  • Dmitry Andreevich Sednev and ,
  • Oleg Sergeyevich Osipov and
  • Eugeny Yurevich Usachev
  • + 1 author+ 0 author

19 February 2023

A significant gap in the known methods for assessing the levels of metal artifacts in X-ray computed tomography and approaches to their reduction is an almost complete disregard for the physical nature of this artifact—the proximity to zero of...

(This article belongs to the Special Issue Application of X-ray Computed Tomography)
  • Article
  • Open Access
6 Citations
6,670 Views
15 Pages

21 December 2012

An important part of computed tomography is the calculation of a three-dimensional reconstruction of an object from series of X-ray images. Unfortunately, some applications do not provide sufficient X-ray images. Then, the reconstructed objects no lo...

(This article belongs to the Special Issue State-of-the-Art Sensors Technology in Germany 2012)
  • Review
  • Open Access
34 Citations
8,144 Views
17 Pages

A Review of Particle Size Analysis with X-ray CT

  • Julia G. Behnsen,
  • Kate Black,
  • James E. Houghton and
  • Richard H. Worden

1 February 2023

Particle size and morphology analysis is a problem common to a wide range of applications, including additive manufacturing, geological and agricultural materials’ characterisation, food manufacturing and pharmaceuticals. Here, we review the us...

  • Article
  • Open Access
5 Citations
4,415 Views
13 Pages

17 January 2019

Carbon fiber-reinforced composite has an excellent X-ray transmission rate as well as specific modulus and strength. The major components of medical devices, X-ray systems, and computed tomography (CT) equipment that require superior X-ray transmissi...

(This article belongs to the Special Issue Carbon Fibers and Their Composite Materials)
  • Article
  • Open Access
17 Citations
3,953 Views
13 Pages

Bimodal Nd-Doped LuVO4 Nanoprobes Functionalized with Polyacrilic Acid for X-Ray Computed Tomography and NIR Luminescent Imaging

  • Nuria O Nuñez,
  • Fernando Cussó,
  • Eugenio Cantelar,
  • Beatriz Martin-Gracia and ,
  • Jesús M de la Fuente,
  • Ariadna Corral,
  • Marcin Balcerzyk and
  • Manuel Ocaña
  • + 3 authors+ 0 author

14 January 2020

Uniform Nd3+-doped LuVO4 nanophosphors have been synthesized for the first time in literature by using a poliol-based method at 120 °C from Nd3+ and vanadate precursors. After optimizing the Nd doping level, these phosphors present intense lumine...

(This article belongs to the Section Synthesis, Interfaces and Nanostructures)
  • Article
  • Open Access
6 Citations
3,816 Views
23 Pages

A Method for Evaluation the Fatigue Microcrack Propagation in Human Cortical Bone Using Differential X-ray Computed Tomography

  • Petr Koudelka,
  • Daniel Kytyr,
  • Tomas Fila,
  • Jan Sleichrt and ,
  • Vaclav Rada,
  • Petr Zlamal,
  • Pavel Benes,
  • Vendula Bendova,
  • Ivana Kumpova and
  • Michal Vopalensky
  • + 5 authors+ 0 author

11 March 2021

Fatigue initiation and the propagation of microcracks in a cortical bone is an initial phase of damage development that may ultimately lead to the formation of macroscopic fractures and failure of the bone. In this work, a time-resolved high-resoluti...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
7 Citations
2,248 Views
16 Pages

20 April 2023

X-ray CT is widely used to study the structure of foam concrete, the quality of which depends on the uniformity in porosity in local volumes (LV) of the samples. The purpose of this work is to substantiate the need to assess the degree of homogeneity...

(This article belongs to the Special Issue Experimental Study, Numerical Simulation & Structural Applications of Construction Materials)
  • Feature Paper
  • Review
  • Open Access
15 Citations
8,700 Views
46 Pages

4 April 2019

A review that summarizes the most recent technological developments in the field of ultrafast structural dynamics with focus on the use of ultrashort X-ray and electron pulses follows. Atomistic views of chemical processes and phase transformations h...

(This article belongs to the Special Issue Photoinduced Cooperative Phenomena)

of 25