- Article
This study models the electrical conductivity (EC) of passion fruit juice during ohmic heating under voltage gradients of 10, 20, and 30 V/cm, considering temperature (25–85 °C) and total soluble solids (TSS: 11.5, 15.5, and 19.5 °Brix)...
This study models the electrical conductivity (EC) of passion fruit juice during ohmic heating under voltage gradients of 10, 20, and 30 V/cm, considering temperature (25–85 °C) and total soluble solids (TSS: 11.5, 15.5, and 19.5 °Brix)...
Nanostructured metal mesh structures demonstrating excellent conductivity and high transparency are one of the promising transparent conducting electrode (TCE) alternatives for indium tin oxide (ITO). Often, these metal nanostructures are to be emplo...
Sensors as a composite film made from reduced graphene oxide (rGO) structures filled with a silicone elastomer are soft and flexible, making them suitable for wearable applications. The sensors exhibit three distinct conducting regions, denoting diff...
The development of electric resistance is a key factor affecting the performance of conductive concrete, especially the electrical–thermal performance. In this work, the effects of different influencing factors (including the water-to-binder ra...
Young pulsars are thought to be highly magnetized neutron stars (NSs). The crustal magnetic field of a NS usually decays at different timescales in the forms of Hall drift and Ohmic dissipation. The magnetization parameter
CaZrO3 (CZO) thin films were deposited on Pt/Ti/SiO2/Si substrates at 450 °C by radio-frequency magnetron sputtering technology. The microstructures and dielectric properties of CZO thin films were investigated. X-ray diffraction analysis reveals...
Resistive switching memories are among the emerging next-generation technologies that are possible candidates for in-memory and neuromorphic computing. In this report, resistive memory-switching behavior in solution-processed trans, trans-1,4-bis-(2-...
Currently, Li-ion cells are the preferred candidates as energy sources for existing portable applications and for those being developed. Thus, a proper characterization of Li-ion cells is required to optimize their use and their manufacturing process...
Pleasant interior conditions within cars, as well as a comfortable feeling, are primary needs of car drivers to perform vital body functions during driving. In a cooler outer environment, a warming system within seats can quite feasibly maintain a re...
Micro-tubular solid oxide fuel cells (µT-SOFCs) are suited to a broad range of applications with power demands ranging from a few watts to several hundred watts. µT-SOFCs possess inherently favourable characteristics over alternate configurations suc...
A simple and low-cost alternating current (AC)-based method, without electrolyte correction, is proposed (Electrochemical Impedance Spectroscopy (EIS)-Zero Gap Cell) for the determination of ohmic contribution of diaphragms. The effectiveness of the...
The primary objective of the present work is to study the effects of heat transfer and entropy production in a nanofluid flow over a curved surface. The influences of Lorentz force and magnetic heating caused by the applied uniform magnetic field and...
Textile structures with ohmic (Joule) heating capability are frequently used for personal thermal management by tuning fluctuations in human body temperature that arise due to climatic changes or for medical applications as electrotherapy. They are c...
The results of experimental studies of ohmic conductivity degradation in the ensembles of nanostructured anatase bridges under a long-term effect of direct current are presented. Stochastic sets of partially conducting inter-electrode bridges consist...
Indium Tin Oxide (ITO) is one of the most widely used ohmic materials for fabricating ohmic layers in thin-film solar cells. ITO thin layers have reached almost the maximum theoretical conductivity and the lowest practical resistivity. Along with ind...
One of the key issues in GaN-based devices is the resistivity and technology of ohmic contacts to n-type GaN. This work presents, for the first time, effective intentional oxygen doping of sputtered GaN films to obtain highly conductive n+-GaN:O film...
Using moderate electric field (MEF) techniques, Ohmic heating (OH) provides the rapid and uniform heating of food products by applying electric fields to them. A range of theoretical Ohmic heating models have been studied by researchers, but model va...
A novel empirical method for fabricating Van der Pauw Hall test samples on GaN epitaxy is proposed and tested, which enables rapid preparation of Van der Pauw Hall test samples on both conductive and non-conductive substrates. Compared to traditional...
This paper reports on the effects of different load profiles on the transient behavior of a polymer electrolyte fuel cell (PEFC). A protocol of six tests, each with different current density ramps, was conducted. The corresponding cell voltage, press...
Zinc electrowinning is an energy-intensive step of hydrometallurgical zinc production in which ohmic drop contributes the second highest overpotential in the process. As the ohmic drop is a result of electrolyte conductivity, three conductivity model...
We used large area, monolayer graphene epitaxially grown on SiC (0001) as contact electrodes for polymer nanofiber devices. Our fabrication process, which avoids polymer resist residues on the graphene surface, results in graphene-polyaniline nanofib...
In order to study the crystallinity of different density polyethylenes, this paper conducts an experimental study on the transformation of the conductance mechanism under a high electric field. In this experiment, X-ray diffraction (XRD), differentia...
Effective Ohmic contact between metals and their conductive channels is a crucial step in developing high-performance Ga2O3-based transistors. Distinct from bulk materials, excess thermal energy of the annealing process can destroy the low-dimensiona...
This paper addresses the trap exploration in amorphous boron-doped ZnO (ZnO:B) films using an asymmetric structure of metal-oxide-metal. In this work, the structure of Ni/ZnO:B/TaN is adopted and the ZnO:B film is deposited by RF magnetron sputtering...
The use of ohmic heating (OH) processing technologies in beverages might provide a higher quality value to the final product; consumers tended to prefer more natural products with minimum preservative substances. The aim of this work was to evaluate...
This paper investigates the possibility of using a nanolaminate TiO2/Ag/TiO2 structure as a transparent conductive coating on GaAs solar cells. A novel result is that this structure forms an Ohmic contact to Al-rich AlGaAs, which is used as a “...
Power conversion efficiency (PCE) has been one of the key concerns for power management circuits (PMC) due to the low output power of the vibrational energy harvesters. This work reports a dynamic threshold cancellation technique for a high-power con...
Among various polymorphic phases of gallium oxide (Ga2O3), α-phase Ga2O3 has clear advantages such as its heteroepitaxial growth as well as wide bandgap, which is promising for use in power devices. In this work, we demonstrate α-Ga2O3 MO...
In this paper, the performance of a high-temperature polymer electrolyte membrane fuel cell (HT-PEMFC) was modeled using literature data. The paper attempted to combine different sources from the literature to find trends in the degradation mechanism...
Research on stretchable strain sensors is actively conducted due to increasing interest in wearable devices. However, typical studies have focused on improving the elasticity of the electrode. Therefore, methods of directly connecting wire or attachi...
In the present study, a series of carbon-based nanocomposites based on recycled thermoplastic polyurethane (TPU) matrix and MWCNT fillers synthesized in a laboratory environment were prepared at various loadings and assessed in terms of their functio...
A zero-dimensional, non-isothermal analytical framework was developed to assess solid oxide fuel cell (SOFC) performance across a broad range of operating conditions. The model integrates the anode, electrolyte, interlayers, and cathode, while resolv...
Prussian blue (PB) layers were electrodeposited for the fabrication of Au/PB/Ag stacks to study the resistive switching effect. The PB layers were characterized by different techniques to prove the homogeneity, composition, and structure. Electrical...
The effects of Fe-implantation on the electrical characteristics of Au/p-Si Schottky barrier diodes (SBDs) were studied using current–voltage (I–V) and capacitance–voltage (C–V) techniques. The Rutherford Backscattering Spectr...
This work reports, for the first time, the phenomenon of lateral Poole–Frenkel current conduction along the dielectric/Si interface of a silicon nanowire metal-oxide semiconductor (MOS) transistor. This discovery has a great impact on the study...
Improving the performances and reducing costs of III-V multijunction solar cells are crucial in aerospatial energy systems and in terrestrial concentrator modules. We attempted to achieve both objectives by implementing non-ohmic metal/semiconductor...
Polymer nanocomposites can serve as promising electrostatic shielding materials; however, the underlying physical mechanisms governing the carrier transport properties between nanofillers and polymers remain unclear. Herein, the structural and electr...
The steady-state electrical conduction current for single and multilayer polyimide (PI) nanocomposite films was observed at the low and high electric field for different temperatures. Experimental data were fitted to conduction models to investigate...
Charge injection and conduction are fundamental phenomena that occur in dielectric materials when subjected to both low and high electric fields. This paper delves into the exploration of various conduction mechanisms, including space-charge-limited...
The study examines the effect of using low nickel (Ni) with high ceria (CeO2) anode content towards the oxidation of H2 and CH4 fuel by evaluating the activation energy of the ohmic process and charge transfer process. Using a micro-tubular solid oxi...
Highly conductive silicon-doped AlGaN and ohmic contacts are needed for deep-UV LEDs and ultrawide bandgap electronics. We demonstrate improved n-Al0.65Ga0.35N films grown by metal–organic chemical vapor deposition (MOCVD) on sapphire substrates usin...
In this study, the effect of atmospheric hydrogen plasma treatment on the in-plane conductivity of solution-processed zinc oxide (ZnO) in various environments is reported. The hydrogen-plasma-treated and untreated ZnO films exhibited ohmic behavior w...
Ohmic heating pasteurization (OHP) is a volumetric thermal processing technology that enables rapid and uniform heat generation within liquid foods. This study aimed to optimize the OHP conditions for passion fruit juice processing by maximizing ther...
In this work, we demonstrate the threshold switching and bipolar resistive switching with non-volatile property of TiN/TaOx/indium tin oxide (ITO) memristor device. The intrinsic switching of TaOx is preferred when a positive bias is applied to the T...
Sodium iron hexacyanoferrate (NaFeHCF) films were electrodeposited on Au/Cr/Si for the study of growth behavior and physical properties. The NaFeHCF films were studied by different analytical methods to prove the chemical composition, morphology and...
The structure formed by cobalt phthalocyanine (CoPc) and cobalt octaethylporphyrin (CoOEP) with electron-acceptor tetracyano-π-quinodimethane (TCNQ), was studied by Density Functional Theory (DFT) methods. According to theoretical calculations, bo...
In this work, a series of novel mixed metal oxide (MMO) electrodes with the composition Ti/RuO2Sb2O4Ptx (0 ≤ x ≤ 10.0) were developed, envisaging their application in a reversible electrochemical cell based on the chloralkaline process as an en...
The aging mechanisms of lead-acid batteries change the electrochemical characteristics. For example, sulfation influences the active surface area, and corrosion increases the resistance. Therefore, it is expected that the state of health (SoH) can be...
Operating proton-exchange membrane fuel cells (PEMFCs) under near-boiling-point conditions is considered promising for heavy-duty applications; however, elevated temperatures and insufficient hydration can intensify mass transport limitations in the...
The present work discusses the influence of the thickness of MF-4SK perfluorinated sulfonic cation-exchange membranes on their electrotransport properties in hydrochloric acid solutions. It is found that diffusion permeability and conductivity are pr...
of 5