- Article
This study investigates the improvement of Ni/SiO2-Al2O3 catalysts in the dry reforming of methane (DRM) process by detailed adjustments of calcination temperature (600–900 °C) and duration (1–9 h). N2 physisorption, H2-TPR, XRD, TGA,...
This study investigates the improvement of Ni/SiO2-Al2O3 catalysts in the dry reforming of methane (DRM) process by detailed adjustments of calcination temperature (600–900 °C) and duration (1–9 h). N2 physisorption, H2-TPR, XRD, TGA,...
To clarify the Ni species of NiO/SiO2-Al2O3 catalysts that are active for ethylene oligomerization, 18 types of NiO/SiO2-Al2O3 were prepared using three Ni-loading methods (i.e., ion-exchange, impregnation, and homogeneous precipitation), with differ...
This work establishes the primordial role played by the support’s nature when aimed at the constitution of Ni2P active phases for supported catalysts. Thus, carbon dioxide reforming of methane was studied over three novel Ni2P catalysts supported on...
Rising greenhouse gas concentrations are causing climatic change that threatens ecosystem sustainability. This study investigated the impact of silica incorporation into alumina-supported nickel catalysts for the partial oxidation of methane (POM), a...
The pore structure of a hydrotreating catalyst plays a pivotal role in hydrodemetallization (HDM) reactions. To effectively construct a meso-macroporous catalyst, we employed a CTAB-guided in situ TEOS hydrolysis approach to prepare silica-coated &ga...
Structured catalysts are one of the most widely used catalysts for carbon dioxide (CO2) methanation, while the interactions between the loaded catalyst and structural supports significantly affect its catalytic activity and stability. Herein, CeO2 mo...
Encapsulation of metal nanoparticles is a leading technique used to inhibit the main deactivation mechanisms in dry reforming of methane reaction (DRM): Carbon formation and Sintering. Ni catalysts (15%) supported on alumina (Al2O3) and ceria (CeO2)...
NiMo sulfide catalysts were prepared by the impregnation of high surface area supports with an aqueous solution made of NiCO3·2Ni(OH)2, MoO3 and citric acid, followed by freeze drying and sulfidation in H2S/H2 mixture. N2 physisorption and X-r...
Pd–Ni bimetallic catalyst supported on a composite carrier of γAl2O3 and SiO2 was prepared by chemical precipitation methodology enhanced with an ultrasonic wave. In the present paper, the influence of dispersant, carrier, ultrasonic time...
Heat and mass transport properties of heterogeneous catalysts have significant effects on their overall performance in many industrial chemical reaction processes. In this work, a new catalyst micro-architecture consisting of a highly thermally condu...
The development of efficient and cost-effective catalysts is crucial for modern catalytic processes, especially in oxidation reactions. In this study, a sol–gel method was successfully adapted for the synthesis of NiO-Fe2O3-SiO2/Al2O3 catalysts...
The siliceous precursor was hydrolyzed from tetraethylorthosilicate (TEOS) under acidic conditions, followed by the addition of sodium aluminate and sodium hydroxide. Y zeolite was subsequently obtained through hydrothermal crystallization under alka...
The Ni2P/SiO2 catalyst, which was prepared by in situ temperature-programmed reduction and in the mixture with the inert (SiC, SiO2) or acidic (γ-Al2O3) material was studied in methyl palmitate hydrodeoxygenation (HDO). Methyl palmitate HDO was carri...
A promising method to reduce global warming has been methane reforming with CO2, as it combines two greenhouse gases to obtain useful products. In this study, Ni-supported catalysts were synthesized using the wet impregnation method to obtain 5%Ni/Al...
H2 production through dry reforming of methane (DRM) is a hot topic amidst growing environmental and atom-economy concerns. Loading Ni-based reducible mixed oxide systems onto a thermally stable support is a reliable approach for obtaining catalysts...
A series of NiMo catalysts with a low MoO3/NiO mass ratio were prepared by introducing SiO2 and Ni during the formation of the support. The supports were improved by adding SiO2 to optimise the surface acidity properties, regulate the main structure...
Previous studies have shown that fats, oils, and greases (FOG) can be deoxygenated to fuel-like hydrocarbons over inexpensive alumina-supported Ni catalysts promoted with Cu or Fe to afford excellent yields of renewable diesel (RD). In this study, su...
This work studied the catalytic activity and stability of Ni-MoS2 supported on γ-Al2O3, SiO2, and TiO2 toward deoxygenation of different feedstocks, i.e., crude Pongamia pinnata oil (PPO) and refined palm olein (RPO). PPO was used as a renewabl...
Ni-based catalysts as replacement for noble metal catalysts are of particular interest in the catalytic conversion of biomass due to their cheap and satisfactory catalytic activity. The Ni/SiO2 catalyst has been studied for the hydrogenolysis of glyc...
Carbon dioxide methanation was carried out over Ni-based catalysts on different supports and chelating ligands in microreactors. To investigate the influence of chelating ligands and supports, the Ni catalysts were prepared using different support su...
Ni, V and Fe are the main contaminant metals that lead to the deactivation of the spent fluid catalytic cracking (SFCC) catalyst. In this work, the properties and distribution of Ni, V and Fe in the SFCC catalyst are investigated by employing EPMA-ED...
Catalytic behaviors of copper phosphide supported on various oxides (SiO2, γ-Al2O3, and USY zeolite) have been evaluated for deoxygenation of oleic acid and compared with nickel and cobalt phosphides. All catalysts were prepared by the hydrogen...
The effect of support nature, SiO2 and γ-Al2O3, on physicochemical and catalytic properties of nickel phosphide catalysts in methyl palmitate hydrodeoxygenation (HDO) has been considered. Firstly, alumina-supported nickel phosphide catalysts pr...
The use of heterogeneous catalysts to increase the development of green chemistry is a rapidly growing area of research to save industry money. In this paper, mesoporous SiO2-Al2O3 mixed oxide supports with various Si/Al ratios were prepared using tw...
Expanded multilayered vermiculite (VMT) was successfully used as catalyst support and Ni/VMT synthesized by microwave irradiation assisted synthesis (MIAS) exhibited excellent performance in our previous work. We also developed a two-dimensional poro...
1-Methylnaphthalene and the products of hydrogenation exhibit a high hydrogen storage capacity (6.6 wt.%), which makes them extremely promising as liquid organic hydrogen carriers. In this work, effective monometallic catalysts, 15Ni/Al2O3, 15Ni/Al2O...
The performance of Ni-Cu/Al2O3 catalysts for steam reforming (SR) of gasoline to produce a hydrogen-rich gas mixture applied in a spark ignition (SI) engine was investigated at relatively low temperature. The structural and morphological features and...
Catalytic hydrotreatment is recognized as an efficient method to improve the properties of pyrolysis liquids (PO) to allow co-feeding with fossil fuels in conventional refinery units. The promising catalyst recipes identified so far are catalysts wit...
Electrified steam methane reforming (eSMR) is emerging as a promising technology for the decarbonization of the chemical industry and low-carbon hydrogen production by coupling renewable electricity with renewable gaseous feedstocks such as biomethan...
Ni/Siral catalysts with different Si/Al ratios were prepared by incipient wetness impregnation (IWI) to assess the impact of support composition on Ni2+ speciation and ethylene oligomerization (EO) performance. The catalysts were characterized by X-r...
In this work, we present an investigation concerning the evaluation of the catalytic properties of Ni nanoparticles supported on ZrO2, SiO2, and MgAl2O4 for CO2 hydrogenation to methane. The supports were prepared by coprecipitation and sol-gel, whil...
CO/CO2 hydrogenation has attracted much attention as a pathway to achieve carbon neutrality and production of synthetic natural gas (SNG). In this work, two-dimensional NiAl layered double oxide (2D NiAl-LDO) has been successfully decorated by SiO2 n...
Dry reforming of methane (DRM) is an eco-friendly method of syngas production due to the utilization of two main greenhouse gases—methane and carbon dioxide. An industrial application of methane dry reforming requires the use of a catalyst with...
The reactive adsorption desulfurization (RADS) of a model gasoline n-hexane containing thiophene was carried out with a NiO/ZnO-Al2O3-SiO2 adsorbent in N2 and H2, respectively. A declining RADS trend has been observed in N2, without the presence of H...
Hydrogenation of phenol in aqueous solutions on Pt-Ni/SiO2, Pt-Ni-Cr/Al2O3, Pt/C, and Ru/C catalysts was studied at temperatures of 150–250 °C and pressures of 40–80 bar. The possibility of hydrogenation of hydrolysis lignin in an aqu...
The activity and stability of Ni-based catalysts for CO2 methanation strongly depend on the morphology and chemical composition of the support. In this work, Ni catalysts with four oxidic supports (SiO2, Al2O3, CeO2, ZrO2) were synthesized via a one-...
In this work, in-house synthesized NiMgAl, Ru/NiMgAl, and Ru/SiO2 catalysts and a commercial ruthenium-containing material (Ru/Al2O3com.) were tested for CO2 methanation at 250, 300, and 350 °C (weight hourly space velocity, WHSV, of 2400 mLN,CO2...
The tackling of carbon deposition during the dry reforming of biogas (BDR) necessitates research of the surface of spent catalysts in an effort to obtain a better understanding of the effect that different carbon allotropes have on the deactivation m...
Post-synthesis methods are a promising technology and have received much attention. In this paper, a series of post-synthesis aluminum modified TUD-1 (PAT) materials with different Al contents were successfully prepared by using aluminum isopropoxide...
This study investigates the effects of samarium (Sm) promotion on the catalytic activity of 5 weight percent Ni catalysts for partial oxidation of methane (POM)-based hydrogen production supported on a Si-Al mixed oxide (10SiO2+90Al2O3) system. Sever...
In this paper, the dependences of the morphology, particle sizes, and compositions of the condensed combustion products (CCP) of modified double-base propellants (1,3,5-trimethylenetrinitramine (RDX) as oxidizer) on the chamber pressure (<35 MPa)...
Three Ni-based natural gas steam reforming catalysts, i.e., commercial JM25-4Q and JM57-4Q, and a laboratory-made catalyst (26% Ni on a 5% SiO2–95% Al2O3), are tested in a laboratory reactor, under carbon dioxide methanation and methane steam r...
Different metathesis catalysts were evaluated regarding their activity for propene production from ethene and trans-butene feedstocks. Nickel, molybdenum, rhenium and tungsten, along with bimetallic nickel-rhenium systems were applied with commercial...
Levulinic acid and its esters (e.g., ethyl levulinate, EL) are platform chemicals derived from biomass feedstocks that can be converted to a variety of valuable compounds. Reductive amination of levulinates with primary amines and H2 over heterogeneo...
In this study, we examine the effect of integrating different carbon nanostructures (carbon nanotubes, CNTs, graphene nanoplatelets, GNPs) into Ni- and Ni-W-based bi-functional catalysts for hydrocracking of heptane performed at 400 °C. The effec...
The in-situ catalytic fast pyrolysis of pinecone over HY catalysts, HY(30; SiO2/Al2O3), HY(60), and 1% Ni/HY(30), was studied by TGA and Py-GC/MS. Thermal and catalytic TGA indicated that the main decomposition temperature region of pinecone, from 20...
Fluid Catalytic Cracking (FCC) has traditionally been a key refining process in generating transportation fuels. Recently, the focus on FCC has been further intensified as it plays an increasingly important role in the generation of key building bloc...
Ammonia borane (AB) is an ideal chemical hydrogen storage material owing to its high gravimetric and volumetric hydrogen capacities. However, the practical application through hydrolysis calls for catalysts that are efficient, stable, and low-cost. I...
Liquid Organic Hydrogen Carriers (LOHCs) represent a promising technology for the safe storage and transport of hydrogen. Its technical development largely depends on the catalysts used in the hydrogenation and dehydrogenation processes. Typically, n...
We report on the growth of SiC nanowires on a single crystal Si substrate by pyrolysis of polycarbosilane and using two catalyst (Al2O3 and Ni) films with different thickness (2, 4, and 6 nm). The catalyst films were deposited on the Si substrate, an...
of 2