1,798 Results Found

The absolute majority of modern studies dealing with the interpretation of experimental data on the basis of the Freundlich isotherm ignore the fact that the data obtained for regions of low and moderate adsorbate concentration/pressure can be analyt...

Using experimental data for the adsorption of phosphates out of wastewater on waste recycled bricks, published independently in MDPI Processes before (2020), this message re-visits the mathematical theory of the Freundlich adsorption model. It demons...

The objective of this study was to model an adsorption column bed with biomass residues using computational software to remove Pb (II) at the industrial level and analyse the effects of parametric variation. For this purpose, several simulations of t...

Knowing the methane adsorption dynamic is of great importance for evaluating shale gas reserves and predicting gas well production. Many experiments have been carried out to explore the influence of many aspects on the adsorption dynamic of methane o...

In the present study, the adsorption of zinc (Zn), lead (Pb), copper (Cu), and cadmium (Cd) was studied in two already polluted urban soil samples with different pH values, an acidic and an alkaline one. The Langmuir and Freundlich adsorption isother...

This study presents evaluation of biochar derived from silkworm cocoons for the adsorption of organic and inorganic contaminants from rainwater. The material was characterised using BET surface area analysis, scanning electron microscopy (SEM), and t...

The demand for intensive agriculture to boost food and crop production has increased. High nitrogen (N) fertilizer use is crucial for increasing agricultural productivity but often leads to significant nitrate losses, posing risks to surface and grou...

This study explores the adsorption of Pb(II) from aqueous solutions using glutathione-modified carbon powder at room temperature. The graphite powder was modified through oxidation followed by surface immobilization of glutathione. The Pb(II) concent...

This study examined the ability of the green microalgae Chlorella vulgaris to remove arsenic from aqueous solutions. A series of studies was conducted to determine the optimal conditions for biological arsenic elimination, including biomass amount, i...

Adsorption equilibrium and kinetics on lignocellulosic base adsorbents from oil palm bagasse (OPB) and yam peels (YP) were studied for the removal of hexavalent chromium present in aqueous solution, in a batch system, evaluating the effect of tempera...

Chlorinated organic compounds (COCs) are a serious threat to human health and the ecological environment due to their toxicity, mutagenicity and carcinogenicity. A number of corresponding treatment techniques have been developed thus far; among these...

Interactions of C.I. Basic Blue 3 with potassium humate in aqueous systems were investigated. Both the humic content and dye removal are of crucial significance in relation to water of a desired quality. Dye retention experiments demonstrated that po...

The presence of dyes in water stream is a major environmental problem that affects aquatic and human life negatively. Therefore, it is essential to remove dye from wastewater before its discharge into the water bodies. In this study, Banyan (Ficus be...

Water contamination by heavy metals is a major global concern resulting from anthropogenic activities and natural geological processes. Their removal and recovery are important for protecting water resources and addressing the depletion of critical m...

Coffee silverskin (CS), the main solid waste produced from the coffee industry, has efficiently been used as adsorbent material to remove potential toxic metals (PTMs). In order to assess its suitability in water remediation, kinetic adsorption exper...

A stable and magnetic graphene oxide (GO) foam–polyethyleneimine–iron nanoparticle (GO–PEI–FeNPs) composite has been fabricated for removal of endocrine disruptors—bisphenol A, progesterone and norethisterone—from...

Phosphate enrichment of surface waters is a major cause of eutrophication, creating demand for low-cost materials that support phosphorus removal and recovery. In this study, Conocarpus waste biochar (CBC) was modified with iron (Fe-CBC), magnesium (...

Carbon dioxide (CO₂) is considered one of the most important greenhouse gases in the study of climate change. CO₂ adsorption was studied using the gas chromatography technique, while the Freundlich and Langmuir adsorption models were employed for pro...

The adsorption mechanisms of methylene blue (MB) onto olive waste (residue) treated with KOH (OR-KOH) and onto an OR-KOH and PEG–silica gel composite (OR-KOH/PEG-SG) at various temperatures were investigated using a combination of experimental...

Consumers are increasingly looking for foods, including wine, that are free of animal-derived proteins. This study seeks to evaluate patatin, a new, plant-based and allergen-free fining agent, by comparing it with the fining agents polyvinipolypyrrol...

Composite hydrogels were prepared that consisted of quasi-colloidal layered double hydroxide (LDH) nanoparticles and agarose via the electrophoretic method, starting from three different agarose concentrations of 0.5, 1, and 2 wt/v%. The composite hy...

The paper presents the research of adsorptive properties of activated carbons to chromium (VI) removal from the water solution. Different types of carbon were investigated: WD-ekstra (WDA), WD-ekstra modified by salt acid WD(HCl) and nitrogen acid WD...

We investigated the adsorption of lead (Pb²⁺) and nickel (Ni²⁺) ions by electrospun membranes of polyacrylonitrile (PAN) nanofiber activated with NaHCO₃ (PANmod). Analysis by Fourier-transform infrared spectrometry (FTIR), field emission scanning ele...

Copper (Cu) and silver (Ag) occur naturally in the environment but have toxic effects on organisms at elevated concentrations. This paper discussed the removal of Cu and Ag from aqueous solutions using biochars obtained at different pyrolysis tempera...

Liquid effluents generated during mineral processing are usually contaminated with heavy metals and oxyanions, requiring an effective technique for their simultaneous removal. This study evaluated adsorption as a method to remove ions from an artific...

Waste from electrical and electronic equipment (WEEE) is constantly increasing in quantity and becoming more and more heterogeneous as technology is rapidly advancing. The negative impacts it has on human and environment safety, and its richness in v...

Toxic metal wastewater is a challenge for exposed terrestrial and aquatic environments, as well as the recyclability of the water, prompting inputs for the development of promising treatment methods. Consequently, the rGO/ZnONP nanocomposite was synt...

The present research demonstrates the facile fabrication of xanthan gum-cl-poly(acrylamide-co-alginic acid) (XG-cl-poly(AAm-co-AA)) hydrogel by employing microwave-assisted copolymerization. Simultaneous copolymerization of acrylamide (AAm) and algin...

Industrial wastewater discharge, tainted with hazardous substances, including dyes like methylene blue (MB) from the textile sector, further emphasizes the need for water treatment to produce safe drinking water. This study explores the potential of...

The effects of rapid industrialization created an enormous burden on the environment. The quality of the water source is drastically affected by the discharge coming from industry and domestic usage. Nowadays, the treatment of wastewater involves the...

Chitosan beads demonstrate good adsorption capacity in wastewater treatment. The ease with which the chitosan beads separate from the effuent and the possibilities of sorbent regeneration have made chitosan beads a more prominent form for biosorption...

NO₂-sensing properties of semiconductor gas sensors using porous In₂O₃ powders loaded with and without 0.5 wt% Au (Au/In₂O₃ and In₂O₃ sensors, respectively) were examined in wet air (70% relative humidity at 25 °C). In addition, the effects of Au...

The ammonia adsorption capacity of lignin-rich biomass solids was tested for the first time at low partial pressures (<1.5 kPa) and 20 °C. The biomass samples included untreated tree barks, husks, and peats, as well as the biochars produced by...

The objective of this study was to investigate the adsorption of two rare earth elements (REEs), namely scandium (Sc) and neodymium (Nd), on biochar produced after low temperature pyrolysis (350 °C) of wood sawdust. The biochar was characterized with...

Selenium adsorption/desorption behavior was examined for eight Greek top soils with different properties, aiming to describe the geochemistry of the elements in the selected soils in terms of bioavailability and contamination risk by leaching. Four s...

In the present work, an Egyptian bentonitic clay sample has been structurally characterized using different techniques such as XRD, IR, SEM, and EDX analyses then evaluated as a sorbent for heavy metal ions removal. The characterization results showe...

This study investigates the potential of biochar derived from agricultural residues—corn cob and wheat straw—for removing polycyclic aromatic hydrocarbons (PAHs) from aqueous systems. Biochars were produced via pyrolysis at 700 °C and...

Natural zeolites are easily found and abundant in Indonesia. The natural zeolites are low-cost minerals; however, their ammonium sorption is poor. A hydrothermal method was applied to improve the ammonium sorption. Hydrothermal treatment times were v...

In this work, pectin biopolymers were functionalized with dichloride (5,10,15,20-tetraphenylporphyrinato) antimony [Sb(TPP)Cl₂] at various compositions (0.5%, 1%, and 2%). The prepared compounds were characterized with several analytical methods, inc...

Freshwater contamination by phosphate and pathogenic bacteria requires low-cost multifunctional treatment materials. Unlike previous studies that use a single biogenic agent to synthesize a single nanoparticle type, this work uses one fixed Aloe vera...

The discharge of nanoparticles into the environment, such as through industrial plants and municipal wastewater treatment plants, can pose a hazard to aquatic life. This study demonstrates the effective removal of silver nanoparticles (AgNPs) using a...

Owing to its exciting physicochemical properties and doping–dedoping chemistry, polyaniline (PANI) has emerged as a potential adsorbent for removal of dyes and heavy metals from aqueous solution. Herein, we report on the synthesis of PANI compo...

Surplus cyanobacterial biomass can serve as a low-cost sorbent for polishing nitrate-contaminated waters. We compared raw cyanobacterial biomass (Leptolyngbya sp.) with its hydrochar produced by hydrothermal carbonization. Despite an approximately te...

Optimizing the physicochemical properties of the chitosan-based activated carbon (Ch-ACs) can greatly enhance its performance toward heavy metal removal from contaminated water. Herein, Ch was converted into a high surface area (1556 m²/g) and porous...

The aquatic environment is continuously being polluted by heavy metals released from industrial, domestic, agricultural, and medical applications. It is difficult to remove heavy metals, as they are nonbiodegradable. Heavy metals cause genotoxicity a...

(1) Phosphorus (P) removal has proven difficult in decentralized wastewater treatment systems, and P binding material, installed as an external filter, has been proposed for improving P removal. Especially, calcium (Ca)-rich materials have shown prom...

Antibiotics in wastewater, sewage sludge, manures, and slurries constitute a risk for the environment when spread on soils. This work studies the adsorption and desorption of the antibiotic cefuroxime (CFX) in 23 agricultural and forest soils, using...

This research investigates the adsorption potential of mango and pitanga tree pruning waste biochar produced at 300 °C and 500 °C for the uptake of Methylene Blue (MB) dye. The particle size of biochar, initial MB concentration, adsorbent mas...

Methylene blue and safranin are dyes that may have harmful effects on both aquatic ecosystems and human health. This research aims to simulate an industrial-scale operational adsorption column for competitively removing these dyes from wastewater, em...

The present paper reviews and analyses different models that could be used to describe the adsorption equilibrium of pure gases. The adsorption equilibrium of hydrogen, nitrogen and methane is characterised and modelled. Several thermodynamic concept...