- Article
Magnetic materials are crucial energy materials that are widely used in day-to-day life. Therefore, the development and study of high-performance magnetic materials are of great significance. In this study, the magnetic materials Co
Magnetic materials are crucial energy materials that are widely used in day-to-day life. Therefore, the development and study of high-performance magnetic materials are of great significance. In this study, the magnetic materials Co
A series of Ni-xSi/ZrO2 (x = 0, 0.1, 0.5, 1 wt%, the controlled contents of Si) catalysts with a controlled nickel content of 10 wt% were prepared by the co-impregnation method with ZrO2 as support and Si as a promoter. The effect of different amount...
In this work, two isothermal sections of the Co-Ta-Si ternary system at 900 °C and 1100 °C are constructed in the whole composition range via phase equilibrium determination with the help of electron probe microanalysis (EPMA) and X-ray diffr...
The relationship between emissivity, delay time, and surface growth for metastable solidification of CoSi-62 at. % eutectic alloys is reported from undercooling experiments conducted using electrostatic levitation. A fraction of the undercooled melt...
The increasing CO2 emission rate is deteriorating the atmospheric environment, leading to global warming and climate change. The potential of the SiC3 nanosheet as a functioning material for the separation of CO2 from the mixture of CO2, H2, N2 and C...
The properties and microstructural evolution of quaternary Cu-Ni-Co-Si alloys with different Ni/Co mass ratios are investigated systematically. These alloys exhibit higher mechanical properties when the Ni/Co mass ratio is 1.12-1.95 (NC-4-NC-5) and s...
To enhance the wide-temperature-range magnetocaloric performance of (Mn,Fe)2(P,Si) alloys, the effects of Mg-Co co-doping on their structural and magnetocaloric properties were systematically investigated. Mn1.05−yCoyFe0.9P0.5Si0.48Mg0.02 alloy...
Significant progress has been made in understanding the reactivity and catalytic activity of gas-phase and loaded gold clusters for CO oxidation. However, little research has focused on mixed silicon/gold clusters (SiAun) for CO oxidation. In the pre...
With the rapid development of society, the demand for information storage is increasing. Hence, research involving magnetic storage materials is gaining importance. In this study, Fe
Lithium silicate (Li4SiO4) material can be applied for CO2 capture in energy production processes, such as hydrogen plants, based on sorption-enhanced reforming and fossil fuel-fired power plants, which has attracted research interests of many resear...
A poly(methyl methacrylate-co-maleic anhydride) P(MMA-co-MA) copolymer was synthesized via radical polymerization. The synthesized P(MMA-co-MA) copolymer was identified by 1H- and 13C-nuclear magnetic resonance spectroscopy (1H-NMR), (13C-NMR), Fouri...
A novel composite photocatalyst was synthesized by loading 5 wt % of platinum cobalt alloy on 3C-SiC nanowires and powder (Pt-Co-SiC) respectively via a simple polyol reduction method. Pt-Co-SiC were comprehensively characterized by SEM, HRTEM, XRD,...
Cu-Ni-Si alloy with a different Co content was prepared by inductive melting and hot rolling. The alloy was solution treated at 950 °C for 1.5 h and aged at 450 °C, 500 °C, and 550 °C for different times. The phase diagram calculation and transmissio...
Cu-Ni-Si alloys are widely used in electrical and electronic industry owing to excellent electrical conductivity and strength. A suitable addition of Co in the Cu-Ni-Si alloys can improve its strength and deteriorate its electrical conductivity. In t...
Si-Co diffusion coatings were prepared on a Y-modified TiAl-Nb alloy using the pack cementation process. The structures of the coatings prepared at different temperatures (1050, 1080, and 1120 °C) and pack Co contents (5, 10, and 20 wt.%) were co...
To obtain high strength and high electrical conductivity at the same time, the microstructure and properties of 0.2 wt.% V-added, 0.1 wt.% V-added and V-free Cu-1.6Ni-1.2Co-0.65Si(-V) alloys were investigated. We examined with electrical conductivity...
Recent advancements in nanotechnology have improved our understanding of cancer treatment and allowed the opportunity to develop novel delivery systems for cancer therapy. The biological complexities of cancer and tumour micro-environments have been...
Development of a practicable artificial photosynthesis process has been considered today as one of the top-most research priorities to address the problems related to the global warming and the associated social cost of carbon, and to develop the ren...
In this research work, Co-B/SiC composite coatings were synthesized by electrochemical deposition from colloidal suspensions with different content of SiC. The Co-B/SiC films obtained were heat treatment at 350 °C. The composition, morphology, an...
Based on the first-principles method, TiAlSiN/WC-Co interface models with graphene doped into the matrix, coating, and the coating/matrix are constructed. The interface adhesion work is calculated and modeled to study the interface bonding properties...
The photoelectrochemical reduction of CO2 to syngas that is used for many practical applications has been emerging as a promising technique to relieve the increase of CO2 in the atmosphere. Si has been considered to be one of the most promising mater...
Cu-Ni-Si alloys are widely used in lead frames and vacuum devices due to their high electrical conductivity and strength. In this paper, a Cu-Ni-Co-Si-Cr-(Ce) alloy was prepared by vacuum induction melting. Hot compression tests of the Cu-Ni-Co-Si-Cr...
Giant magnetostriction could be achieved in MnCoSi-based alloys due to the magneto-elastic coupling accompanied by the meta-magnetic transition. In the present work, the effects of hydrostatic pressure on magnetostrictive behavior in MnCo0.92Ni0.08Si...
Sodium silicate, a new type of CO2 sorbent, has a relatively low cost, but its sorption reactivity is not yet good enough. Alkali carbonate doping is commonly used as an effective means to improve the CO2 uptake reactivity of solid sorbents. In this...
The conventional CO electrochemical gas sensor uses aqueous H2SO4 solution as electrolyte, with inevitable problems, such as the drying and leakage of electrolyte. Thus, research on new alternative electrolytes is an attractive field in electrochemic...
The properties and microstructure evolution of quaternary Cu-Ni-Co-Si alloys with different Ni/Co mass ratios were investigated. The microstructure and morphological characteristics of the precipitates were analyzed by using electron backscatter diff...
The study of the adsorption behavior of C, CO and Cl2 on the surface of ZrSiO4 is of great significance for the formulation of the technological parameters in the carbochlorination reaction process. Based on first principles, the adsorption structure...
A new potassium-based adsorbent for CO2 capture with Al aerogel used as support is proposed in this work. The adsorbents with different surface modifiers (tetraethyl orthosilicate (TEOS) and trimethyl chlorosilane (TMCS)) and different K2CO3 loadings...
The combination of therapeutic nucleic acids and chemotherapeutic drugs has shown great promise for cancer therapy. In this study, asialoglycoprotein receptors (ASGPR) targeting-ligand-based liposomes were tested to determine whether they can co-deli...
The urgent need to reduce CO2 emissions requires the development of efficient catalysts for the conversion of CO2 into chemicals and fuels. In this study, a series of nickel catalysts supported on ITQ-2 and ZSM-5 zeolites have been prepared, characte...
In this study, a series of Co3O4 nanoparticle-functionalized mesoporous SiO2 (Co–SiO2) were successfully synthesized via a spontaneous infiltration route. Co species were firstly infiltrated into the confined spaces between the surfactant and s...
Composite polymer electrolyte (CPE) based on polyvinyl alcohol (PVA) polymer, potassium carbonate (K2CO3) salt, and silica (SiO2) filler was investigated and optimized in this study for improved ionic conductivity and potential window for use in elec...
Silicon-doped (Si-doped) diamond films were deposited on a Co-cemented tungsten carbide (WC-Co) substrate using the hot filament chemical vapor deposition (HFCVD) method with a mixture of acetone, tetraethoxysilane (TEOS), and hydrogen as the recant...
Ni–Co–P/Si3N4 composite coatings were fabricated over an aluminum–silicon (Al–Si) substrate using a pulse-current electroplating process, in which the rapid deposition of an intermediate nickel–cobalt layer was used to i...
This study aimed to improve the surface hardness and wear resistance of spindle hook teeth with special shapes to reduce the cost of replacing the spindle on cotton pickers. For this goal, a Ni-Co-β-SiC composite coating with different concentrations...
Middle East respiratory syndrome coronavirus (MERS-CoV) is caused by a well-known coronavirus first identified in a hospitalized patient in the Kingdom of Saudi Arabia. MERS-CoV is a serious pathogen affecting both human and camel health globally, wi...
This review provides an overview of recent advancements in Cu-Ni-Co-Si alloys, focusing on their processing methods, microstructures, and properties. Due to their non-toxic composition, enhanced mechanical properties, and excellent electrical conduct...
MERS-CoV was identified for the first time in Jeddah, Saudi Arabia in 2012 in a hospitalized patient. This virus subsequently spread to 27 countries with a total of 939 deaths and 2586 confirmed cases and now has become a serious concern globally. Ca...
The porous and biomimetic cobalt silicate@diatomite (Co2SiO4@diatomite) was successfully synthesized by a two-step method, including the hydrothermal method and calcination to improve the electromagnetic wave absorption property. Different hydrotherm...
Ni-Co-SiC composite coatings were prepared by modified watt-type plating solution with 40 nm SiC particles. The effects of polyethyleneimine (PEI) on the dispersion of SiC nanoparticles and the hardness and corrosion resistance of Ni-Co-SiC coatings...
A combination of chemotherapeutic drugs and siRNA is emerging as a new modality for cancer therapy. A safe and effective carrier platform is needed for combination drug delivery. Here, a functionalized mixed micelle-based delivery system was develope...
It is well known that layered double hydroxides (LDHs) are two-dimensional (2D) layered compounds. However, we modified these 2D layered compounds to become one-dimensional (1D) nanostructures destined for high-performance supercapacitors application...
CoCrFeNiSiMoW medium-entropy alloy coatings (MEACs) were fabricated by plasma-arc surfacing welding on Q235 steel. The microstructures and mechanical properties of CoCrFeNiSiMoW MEACs were studied. CoCrFeNiSiMoW MEACs are made from a mixture of NiCrC...
Cu-Ni-Si is a prominent example of a high-end lead frame copper alloy. The enhancement of strength without compromising electrical conductivity has emerged as a prominent research focus. The evolution of the precipitates exerts a significant influenc...
17 October 2023
The Middle East respiratory syndrome coronavirus (MERS-CoV) was first isolated from a patient with acute pneumonia and renal failure in Saudi Arabia in 2012. By July 2023, MERS-CoV had resulted in 2605 human cases worldwide, causing a fatality rate o...
Coronavirus infectious disease 2019 (COVID-19), caused by severe acute respiratory virus type 2 (SARS-CoV-2), has caused a global public health crisis. As an RNA virus, the high gene mutability of SARS-CoV-2 poses significant challenges to the develo...
The plate-like structure is the most familiar morphology for conventional layered double hydroxides (LDHs) in case their structures consist of divalent and trivalent cations in their layers. In this study, nanofibers and nanoneedles of Co–Si LD...
Lead was recovered through a direct smelting reduction route from a lead concentrate by using mixtures of Na2CO3 and SiC to 1000 °C. The lead concentrate was obtained from the mining State of Zacatecas, México by traditional mineral proces...
Water alternating gas (WAG) flooding is a widely employed enhanced oil recovery method in various reservoirs worldwide. In this research, we will employ SiO2 nanofluid alternating with the CO2 injection method as a replacement for the conventional WA...
This study explores microstructure, wear, and corrosion resistance properties of FeCoNiCrAl0.7Cu0.3Six (x = 0, 0.2, 0.3, 0.5) high-entropy alloys. The FeCoNiCrAl0.7Cu0.3Six alloy contains FCC and BCC structures; as the x increases, the FeCoNiCrAl0.7C...
of 66