- Article
The sol–gel polymerization of alkoxysilanes is a convenient and widely used method for the synthesis of silicon polymers and silicon–organic composites. The development of new sol–gel precursors is very important for obtaining new t...
The sol–gel polymerization of alkoxysilanes is a convenient and widely used method for the synthesis of silicon polymers and silicon–organic composites. The development of new sol–gel precursors is very important for obtaining new t...
Headed for developing minimalistic strategies to produce graphene@metal hybrids for electronics on a larger scale, we discovered that graphene oxide (GO)-metal oxide (MO) hybrids are formed spontaneously in water at room temperature in the presence o...
Recent interest in optimizing composition and synthesis conditions of functional crystals, and the further exploration of new possible candidates for tunable solid-state lasers, has led to significant research on compounds in this family MIMIII(MVIO4...
Solid-state nuclear magnetic resonance (ssNMR) spectroscopy provides information on native structures and the dynamics for predicting and designing the physical properties of multi-component solid materials. However, such an analysis is difficult bec...
This work explores the effect of lattice solvent on the observed solid-state spin-transition of a previously reported dinuclear Fe(II) triple helicate series 1–3 of the general form [FeII2L3](BF4)4(CH3CN)n, where L is the Schiff base condensati...
Metal organic complexes consisting of transition metal centers linked by organic ligands, may show bistability which enables the system to be observed in two different electronic states depending on external condition. One of the spectacular examples...
The calcium-binding protein S100A9 is recognized as an important component of the brain neuroinflammatory response to the onset and development of neurodegenerative disease. S100A9 is intrinsically amyloidogenic and in vivo co-aggregates with amyloid...
Cooperative spin crossover (SCO) materials exhibit first-order phase transitions in the solid state, between the high-spin (HS) and low-spin (LS) states. Elastic long-range interactions are the basic mechanism for this particular behavior and are des...
Carbamazepine (CBZ), a widely used antiepileptic, is known to be sensitive to light. The aim of this study was to evaluate the photostabilities of three cocrystals of CBZ (CBZ–succinic acid (SUC), CBZ–saccharin (SAC) form I, and CBZ&ndash...
For spin crossover (SCO) complexes, computation results are reported and confirmed with experiments at multiscale levels of the isolated molecule and extended solid on the one hand and theory on the other hand. The SCO phenomenon which characteriz...
In this investigation, a multifunctional visible-light TX-based photosensitizer containing a siloxane moiety (TXS) was designed with a good overall yield of 54%. The addition of a siloxane moiety enabled the incorporation of a TX photosensitizer into...
A new solid-state
Armalcolite, a rare ceramic mineral and normally found in the lunar earth, was synthesized by solid-state step-sintering. The in situ phase-changed novel ceramic nanocrystals of Ca-Mg-Ti-Fe based oxide (CMTFOx), their chemical reactions and bonding w...
More and more attention has been paid to environmentally friendly bio-based renewable materials as the substitution of fossil-based materials, due to the increasing environmental concerns. In this study, regenerated cellulose films with enhanced mech...
The preparation of novel organic-inorganic hybrid mesoporous organosilica containing pyridinedicarboxamide functional groups uniformly distributed inside the nanostructured pore walls has been addressed. The mesoporosity and uniformity of the synthes...
The discovery of high-
With the development of chip technology, the demand for device reliability in various electronic chip industries continues to grow. In recent years, with the advancement of quantum sensors, the solid-state spin (nitrogen-vacancy) NV center temperatur...
Increasing the number of phenylcarbazole (PC) units attached to the silicon atom in organic solid-state thin films led to a remarkable enhancement in charge mobility. Specifically, the charge mobility values exhibited an increase from 1.32 × 10...
Indium Arsenide is a III–V semiconductor with low electron effective mass, a small band gap, strong spin–orbit coupling, and a large g-factor. These properties and its surface Fermi level pinned in the conduction band make InAs a good can...
In this study, Ba0.6Sr0.4Ti1-xMnxO3 ceramics were fabricated by a novel ball milling technique followed by spin-coating to produce thin-film resistive memories. Measurements were made using field emission scanning electron microscopes, atomic force m...
The reaction of wood with maleic anhydride (MA) and sodium hypophosphite (SHP) has been identified as a viable modification method, with macroscopical properties indicating formation of cross-linking to explain the results. However, the chemical reac...
In this review on advanced biomolecular EPR spectroscopy, which addresses both the EPR and NMR communities, considerable emphasis is put on delineating the complementarity of NMR and EPR regarding the measurement of interactions and dynamics of large...
Iron(II) spin crossover molecular materials are made of coordination centres switchable between two states by temperature, pressure or a visible light irradiation. The relevant macroscopic parameter which monitors the magnetic state of a given solid...
This review is devoted to different types of novel polymer electrolytes for lithium power sources developed during the last decade. In the first part, the compositions and conductivity of various polymer electrolytes are considered. The second part c...
Previous investigations of H. oreadica reported the presence of a wide spectrum of complex limonoids and dihydrocinnamic acids. Our interest in the Rutaceae motivated a reinvestigation of H. oreadica, H. brasiliana and H. superba searching for other...
Conventional thin-film processing techniques remain inadequate for obtaining superior dense ceramic thick films. The incompatibility of ceramic films prepared via other methods, such as screen printing, spin coating, and sputtering, is a major obstac...
Two-dimensional aluminophosphate is an important precursor of phosphate-based zeolites; a new Sun Yat-sen University No. 6 (SYSU-6) with |Hada|2[Al2(HPO4)(PO4)2] has been synthesized in the hydrothermal synthesis with organic structure-directing agen...
Gene V protein (gVp) of the bacteriophages of the Ff family is a non-specific single-stranded DNA (ssDNA) binding protein. gVp binds to viral DNA during phage replication inside host Escherichia coli cells, thereby blocking further replication and si...
We examined the magnetic ground states, the preferred spin orientations and the spin exchanges of four layered phases MPS3 (M = Mn, Fe, Co, Ni) by first principles density functional theory plus onsite repulsion (DFT + U) calculations. The magnetic g...
Spin Hamiltonians, like the Heisenberg model, are used to describe the magnetic properties of exchange-coupled molecules and solids. For finite clusters, physical quantities, such as heat capacities, magnetic susceptibilities or neutron-scattering sp...
Recently, Bombyx mori silk fibroin (SF) has been shown to be a suitable material for vascular prostheses for small arteries. In this study, we developed a softer SF graft by coating water-dispersed biodegradable polyurethane (PU) based on polycaprola...
Cork is a unique material and its by-products are attracting an ever-growing interest for preparing new materials in an attempt to extend the outstanding properties of cork toward innovative and high value applications. Yet, the miscibility of cork p...
In 1991 the layered organic compound
Structural and magnetic data on two iron (III) complexes with a hexadentate Schiff base chelating ligand and Cl− or BPh4− counterions are reported. In the solid state, the Cl− complex [Fe(5F-sal2333)]Cl, 1, is high spin between 5&nd...
In the present study, the screening of Mirabegron (MBR) co-amorphous was performed to produce water-soluble and thermodynamically stable MBR co-amorphous with the purpose of overcoming the water solubility problem of MBR. MBR is Biopharmaceutics Clas...
Colloidal quantum dots (QDs) are a promising luminescent material for the development of next generation hybrid light-emitting diodes (QDLEDs). In particular, QDs are of great interest in terms of the development of solid-state light sources with an...
Intake of butyrylated starches may increase colonic butyrate supply, which can be of public health and clinical benefit by maintaining colonic health. The objective was to investigate if an organocatalytic method with tartaric acid as a catalyst coul...
Atomically thin two-dimensional (2D) hexagonal boron nitride (hBN) has emerged as an essential material for the encapsulation layer in van der Waals heterostructures and efficient deep ultraviolet optoelectronics. This is primarily due to its remarka...
Two-dimensional metal chalcogenides (2D-MCs) with complex interactions are usually rich in phase transition behavior, such as superconductivity, charge density wave (CDW), and magnetic transitions, which hold great promise for the exploration of exci...
Polymer microparticles are used in additive manufacturing, separation and purification devices, biocatalysis, or for the recognition of biomolecules. This study reports on the effect of metal fillers on the structure and molecular dynamics of polyami...
Hydride-forming alloys are currently considered reliable and suitable hydrogen storage materials because of their relatively high volumetric densities, and reversible H2 absorption/desorption kinetics, with high storage capacity. Nonetheless, their p...
The formation of secondary phases of NiTe2 and NbTe2 in p-type Bi0.5Sb1.5Te3 thermoelectric alloys was investigated through in situ phase separation by using the melt spinning process. Adding stoichiometric Ni, Nb, and Te in a solid-state synthesis p...
Hyperpolarization is one of the approaches to enhance Nuclear Magnetic Resonance (NMR) and Magnetic Resonance Imaging (MRI) signal by increasing the population difference between the nuclear spin states. Imaging hyperpolarized solids opens up extensi...
Herein we report the synthesis and characterization of three new dinuclear iron(II) complexes [FeII2(I4MTD)2](F3CSO3)4 (C1), [FeII2(I4MTD)2](ClO4)4 (C2) and [FeII2(I4MTD)2](BF4)4 (C3) based on the novel ligand (I4MTD = 2,5-bis{[(1H-imidazol-4-ylmethy...
Spin-crossover solids have been studied for many years for their promising applications as optical switches and reversible high-density memories for information storage. This study reports the effect of random metal dilution on the thermal and struct...
Among the large family of spin-crossover materials, binuclear systems play an important role due to their specific molecular configurations, allowing the presence of multi-step transitions and elastic frustration. Although this issue benefited from a...
Aceclofenac-loaded polyvinylpyrrolidone fiber-based amorphous solid dispersion was produced successfully by centrifugal spinning. The solution concentration and rotational speed were optimized to produce the fiber-based drug carrier system, with a de...
One-dimensional spin crossover (SCO) solids that convert between the low spin (LS) and the high spin (HS) states are widely studied in the literature due to their diverse thermal and optical characteristics which allow obtaining many original behavio...
Finite-temperature density functional theory (DFT) has become of topical interest, partly due to the increasing ability to create novel states of warm-correlated matter (WCM).Warm-dense matter (WDM), ultra-fast matter (UFM), and high-energy density m...
of 6