Additive manufacturing has revolutionized manufacturing across a spectrum of industries by enabling the production of complex geometries with unparalleled customization and reduced waste. Beginning as a rapid prototyping tool, additive manufacturing...
Short-fiber-reinforced composites (SFRCs) are widely used for their high strength-to-weight ratio. In the Additive Manufacturing (AM) field, Material Extrusion (MEX) processes inherently induce anisotropy, primarily due to fiber alignment along the d...
The fabrication of support-free structures in pellet additive manufacturing (PAM) is severely limited by gravity-induced sagging, a phenomenon lacking predictive, physics-based models. This study introduces and validates a numerical model for the the...
It is challenging to manufacture complex and intricate shapes and geometries with desired surface characteristics using a single manufacturing process. Parts often need to undergo post-processing and must be transported from one machine into another...
Magnesium alloys, renowned for their lightweight yet high-strength characteristics, with exceptional mechanical properties, are highly coveted for numerous applications. The emergence of magnesium alloy additive manufacturing (Mg AM) has further prop...
Maraging steels are used to produce tools by Additive Manufacturing (AM) methods such as Laser Metal Deposition (LMD) and Selective Laser Melting (SLM). Although it is well established that dense parts can be produced by AM, the influence of the AM p...
Wire Laser Additive Manufacturing (WLAM) has emerged as a promising alternative for the fabrication and repair of components subjected to severe wear conditions due to its high deposition rate, efficient material utilization, and localized thermal co...
Additive manufacturing (AM) and topology optimization (TO) emerge as vital processes in modern industries, with broad adoption driven by reduced expenses and the desire for lightweight and complex designs. However, iterative topology optimization can...
The great capability of additive manufacturing to produce parts with complex, even impossible to achieve, geometries through five-or-more-axis machining or other conventional processes opened a promising future decades ago. For its part, mature subtr...
A low-profile single-ridge waveguide magic-T is proposed as a combination of two T-junctions at an X band. A slot coupling technique is used to reduce the component dimensions in the E-plane, thus leading to a low profile. The device can assume two c...
The manufacturing sector has undergone significant growth due to the integration of technologies from the Fourth Industrial Revolution. Industry 4.0 has revolutionized industrial operations, leading to increased utilization of smart and automated sys...
Wire Laser Additive Manufacturing (WLAM) has emerged as a promising directed energy deposition technology, combining the high deposition efficiency of wire-fed processes with the localized heat input and dimensional accuracy provided by laser process...
The objective of this paper is to present a new hybrid additive manufacturing route for fabricating collector coins with complex, intricate contoured holes. The new manufacturing route combines metal deposition by additive manufacturing with metal cu...
Polyetheretherketone (PEEK) has been the focus of substantial additive manufacturing research for two principal reasons: (a) the mechanical performance approaches that of aluminum at relatively high temperatures for thermoplastics and (b) the potenti...
In this work, an innovative manufacturing approach that includes a fully linked and integrated manufacturing system consisting of a laser-based directed energy deposition (DED-LB/M) module and a forming press is presented. The alternating additive ma...
Additive manufacturing (AM) is a layerwise production process that creates three-dimensional objects according to a digital model. This technology has demonstrated to be a promising alternative to conventional manufacturing methods for various indust...
Additive manufacturing (AM) (=3D printing) has emerged during the last few years as a powerful technological platform for fabrication of functional parts with unique complex geometries and superior functionalities that are next to impossible to achie...
The mechanical response of steel auxetic structures manufactured using laser-powder bed fusion was explored. The level of control exerted by the key design parameters of vertical strut length (H), re-entrant strut length (L), strut thickness (t) and...
Nature has created a unique combination of materials, and the design and material compositions used in nature are not successfully employed for industrial applications. Metallic multimaterials (MMMs) are a unique class of materials that combine the p...
Due to the unparalleled benefits of traditional processing techniques, additive manufacturing technology has experienced rapid development and continues to expand its applications. However, as industrial standards advance, the pressing needs for high...
The additive manufacturing (AM) technique, laser metal deposition (LMD), combines the advantages of near net shape manufacturing, tailored thermal process conditions and in situ alloy modification. This makes LMD a promising approach for the processi...
Advanced tissue engineering (TE) technology based on additive manufacturing (AM) can fabricate scaffolds with a three-dimensional (3D) environment suitable for cartilage regeneration. Specifically, AM technology may allow the incorporation of complex...
Design for Additive Manufacturing (DfAM) encompasses two primary strategies: adapting traditional designs for 3D printing and developing designs specifically optimized for additive manufacturing. The latter emphasizes consolidating assemblies and red...
The last few decades have seen rapid growth in additive manufacturing (AM) technologies. AM has implemented a novel method of production in design, manufacture, and delivery to end-users. Accordingly, AM technologies have given great flexibility in d...
A physics-based analytical model is proposed in order to predict the temperature profile during metal additive manufacturing (AM) processes, by considering the effects of temperature history in each layer, temperature-sensitivity of material properti...
The quest for waste reduction and the development of manufacturing processes that meet the economic, social and environmental requirements necessitate this study. Additive manufacturing is an emerging digital technology that can be used to seamlessly...
Additive manufacturing (AM), also known as 3D printing, has emerged as a transformative technology in various industries, providing unprecedented design freedom and customized manufacturing solutions. This paper presents a detailed exploration of add...
The aim of this study is to develop a digital twin hierarchy that fully examines the design and manufacturing processes of an automotive component for metal additive manufacturing. Initially, a lighter model was obtained that was more resistant to st...
Additive manufacturing (AM), commonly named 3D printing, is a promising technology for many applications. It is the most viable option for widespread use in automated construction processes, especially for harsh environments such as underwater. Some...
Metal additive manufacturing (AM) is a layer-by-layer process that makes the direct manufacturing of various industrial parts possible. This method facilitates the design and fabrication of complex industrial, advanced, and fine parts that are used i...
Directed Energy Deposition (DED), as a core branch of additive manufacturing, encompasses two typical processes: laser directed energy deposition (LDED) and wire and arc additive manufacturing (WAAM), which are widely used in manufacturing aerospace...
Hydrogel has become a commonly used material for 3D and 4D printing due to its favorable biocompatibility and low cost. Additive manufacturing, also known as 3D printing, was originally referred to as rapid prototyping manufacturing. Variable-feature...
Additive manufacturing (AM), also known as three-dimensional (3D) printing, is a manufacturing technology that constructs objects by sequentially adding material layer by layer. AM encompasses a range of different techniques capable of working with v...
The design of additive manufacturing processes, especially for batch production in industrial practice, is of high importance for the propagation of new additive manufacturing technology. Manual redesign procedures of the additive manufactured parts...
Ultrafast lasers are proven and continually evolving manufacturing tools. Concurrently, additive manufacturing (AM) has emerged as a key area of interest for 3D fabrication of objects with arbitrary geometries. Use of ultrafast lasers for AM presents...
Additive manufacturing (AM) is a rapidly expanding material production technique that brings new opportunities in various fields as it enables fast and low-cost prototyping as well as easy customisation. However, it is still hindered by raw material...
The single-pass multi-layer depositing strategy is usually used to fabricate thin-wall structures with wire and arc additive manufacturing (WAAM) technology. Various deposited wall thicknesses often lead to a change in arc shrinkage in the wall thick...
High entropy alloys have attracted much interest over the last 16 years due to their promising an unusual properties in different fields that offer many new possible application. Additionally, additive manufacturing has drawn attention due to its ver...
Metallic additive manufacturing is expeditiously gaining attention in advanced industries for manufacturing intricate structures for customized applications. However, the inadequate surface quality has inspired the inception of metallic coatings thro...
Ultrasonic-assisted wire–arc additive manufacturing (WAAM) can refine microstructures, enhancing performance and improving stress concentration and anisotropy. It has important application prospects in aerospace, weaponry, energy, transportatio...
In this paper, bimetallic functionally graded structures were fabricated using wire and arc additive manufacturing (WAAM). The bimetallic walls were built by depositing Si-Bronze and high-strength low-alloy (HSLA) steel, successively. The microstruct...
Additive manufacturing (AM) has evolved to enable the direct production of functional components through the hybridization of additive and subtractive processes. In metal wire AM, hybridization is key, encompassing process integration (addition/subtr...
The increasing power density of high-performance electronic devices poses significant thermal management challenges. Vapor chambers (VCs) offer efficient heat dissipation, but traditional manufacturing methods limit their structural precision and per...
Additive manufacturing (AM) offers the possibility to produce components in a resource-efficient and environmentally friendly way. AM can also be used to optimise the design of components in mechanical and physical terms. In this way, functionally in...
Polycaprolactone (PCL) is a resorbable semicrystalline polymer that degrades slowly via hydrolysis and has applications in medical implants and drug delivery. As a result of its low melting point, PCL can be processed easily by conventional polymer p...
(1) Background: Products, manufactured using additive manufacturing technologies (AM) are increasingly present on the market. The research was undertaken to determine the possibilities of increasing the use of AM technology in Polish manufacturing co...
Additive manufacturing (AM), commonly known as 3D printing, is revolutionizing manufacturing, medicine, and engineering. This perspective explores recent breakthroughs that position AM as a disruptive technology. Innovations like volumetric additive...
In recent years, additive manufacturing has gained importance in a wide range of research applications such as medicine, biotechnology, engineering, etc. It has become one of the most innovative and high-performance manufacturing technologies of the...
With the development of the aerospace and automotive industries, high heat exchange efficiency is a challenge facing the development of various industries. Pure copper has excellent mechanical and physical properties, especially high thermal conducti...
The additive manufacturing (AM) field is rapidly expanding, attracting significant scientific attention. This family of processes will be widely used in the evolution of Industry 4.0, particularly in the production of customized components. However,...
of 346