Next Article in Journal
Energy Transfer from Photosystem I to Thermally Reduced Graphene Oxide
Previous Article in Journal
Microstructures, Mechanical Properties, and Corrosion Behavior of As-Cast Mg–2.0Zn–0.5Zr–xGd (wt %) Biodegradable Alloys
Previous Article in Special Issue
Influence of Powder Characteristics on Processability of AlSi12 Alloy Fabricated by Selective Laser Melting
Open AccessEditorial

Frontiers of Additively Manufactured Metallic Materials

Additive Manufacturing Laboratory, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology (TU Delft), Mekelweg 2, 2628CD Delft, The Netherlands
Materials 2018, 11(9), 1566; https://doi.org/10.3390/ma11091566
Received: 20 August 2018 / Revised: 23 August 2018 / Accepted: 23 August 2018 / Published: 30 August 2018
(This article belongs to the Special Issue Perspectives on Additively Manufactured Metallic Materials)
Additive manufacturing (AM) (=3D printing) has emerged during the last few years as a powerful technological platform for fabrication of functional parts with unique complex geometries and superior functionalities that are next to impossible to achieve using conventional manufacturing techniques. Due to their importance in industrial applications and the maturity of the applicable AM techniques, metallic materials are at the forefront of the developments in AM. In this editorial, which has been written as a preamble to the special issue “Perspectives on Additively Manufactured Metallic Materials”, I will highlight some of the frontiers of research on AM of metallic materials to help readers better understand the cutting edge of research in this area. Some of these topics are addressed in the articles appearing in this special issue, while others constitute worthy avenues for future research. View Full-Text
Keywords: additive manufacturing; 3D printing; metals and metallic alloys; digital manufacturing; multi-scale manufacturing additive manufacturing; 3D printing; metals and metallic alloys; digital manufacturing; multi-scale manufacturing
MDPI and ACS Style

Zadpoor, A.A. Frontiers of Additively Manufactured Metallic Materials. Materials 2018, 11, 1566.

Show more citation formats Show less citations formats
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map by Country/Region

1
Search more from Scilit
 
Search
Back to TopTop