Colloid transport experiments focusing on the initial deposition stage in water-unsaturated sand columns were conducted. To examine the effect of electrostatic interaction in the unsaturated condition, negatively and positively charged silica colloid...
The formation of ordered particle arrays plays an essential role in nanotechnology, biological systems, and inorganic photonic structures in the geosphere. Here, we show how ordered arrays of amorphous silica spheres form in deeply weathered litholog...
Colloids may have an important role in regulating the structure and function of groundwater ecosystems, and may influence the migration of low solubility contaminants in groundwater. There is, however, a degree of uncertainty about how colloids behav...
Potentiometric titrations have been routinely used to measure the proton-related surface charge density (SCD) of particles in solution. Here, we quantify the SCD of silica nanoparticles (NPs) that are commercially available as charge-stabilized collo...
The viability of spin-coating methods for the self-assembly of 150 nm diameter silica nanocolloids into large crystal structures on mica was investigated using different colloidal concentrations, accelerations, and rotational speeds. The samples were...
The main challenge in scheelite flotation lies in the contamination of the concentrate by other calcium-bearing minerals, mainly calcite. To remedy this problem, sodium silicate is frequently used as a depressant. According to the literature, one hyp...
Colloidal silica can quickly seep through sand and then form silica gels to cement sand particles. To improve the strength of sand seeped by colloidal silica, carbon nanotubes were dispersed in the colloidal silica to form carbon-nanotube-reinforced...
Recently, fluorine materials have been a serious cause of environmental concern. In response, a novel fluorine-free superhydrophobic coating is presented in this paper. A superhydrophobic coating based on silicone and surface-modified colloidal silic...
The transport and deposition of colloids in aquifers plays an important role in managed aquifer recharge (MAR) schemes. Here, the processes of colloidal silica transport and deposition were studied by displacing groundwater with recharge water. The r...
Colloidal silica acts as a multifunctional reagent in the froth flotation process of semi-soluble salt-type minerals, enabling the selective depression of calcite. This study investigates its effect on four key minerals—calcite, scheelite, apat...
There have been numerous studies on shotcrete based on strength and durability. However, few studies have been conducted on rheological characteristics, which are very important parameters for evaluating the pumpability and shootability of shotcrete....
Late-Archean seawater functioned as a vast, redox-tuned colloidal system for which its kinetics were largely governed by the surface chemistry of silica–iron nanoparticles. By reproducing Archean seawater (≈0.7 M ionic strength, 25 °C) in laboratory...
High-volume fly ash cement exhibits drawbacks such as delayed hydration and reduced early-age compressive strength due to the replacement of large amounts of cement with fly ash. In recent years, various studies have been conducted to overcome these...
Cembinder, Eka EXP36, and MEYCO MP320 are three colloidal silica materials that have been proposed for post-excavation grouting of deep tunnels in a radioactive waste repository. In this study, samples of these colloidal silicas were tested for their...
Colloidal silica can seep through calcareous sand in the subgrade, forming colloidal-silica-cemented sand with self-sensing ability—that is, it is sensitive to stress changes caused by vehicle loading. Its self-sensing sensitivity is higher tha...
This study applies a new method of mixing colloidal nano-silica (CNS). Previous studies have used powdered nano-silica or colloidal nano-silica and applied a binder weight substitution method. In this study, we tried to use ordinary Portland cement (...
Colloids are metastable suspensions of particles dispersed in a base fluid, with high scientific and industrial importance, but the monitoring of these systems still demands expensive and large instrumentation. In this research, the measurement of co...
Colloidal silica (CS) is a kind of nanomaterial used in soil/rock grouting techniques in different branches of civil engineering. Many studies have recently been performed to investigate the potential of CS in improving the mechanical behavior of coh...
Water seepage flow can dissolve soluble minerals that exist in rock formations. With the development of the excavated area due to dissolution, the water seepage velocity (discharge) into the dissolved rock will also increase. Therefore, water seepage...
A colloidal damper (CD) can dissipate a significant amount of vibrations and impact energy owing to the interface power that is generated when it is used. It is of great practical significance to study the influence of the nanochannel structure of hy...
Colloidal silica-bonded castables offer several advantages compared to traditional calcium aluminate cement (CAC)-bonded castables, including lower torque values during mixing, superior drying properties, and a lower CaO content. Nevertheless, inform...
The influence of the quantity of silanol in an active silicic acid solution (ASAS) on the growth rate of colloidal silica particles was investigated. The quantity of silanol in the ASAS was controlled by varying the acid concentration as a hydrolysis...
Surface imprinting is an effective and simple method to fabricate and retain imprinted templates and recognizable nanocavities after template extraction. The imprinted effects can be controlled depending on the surface morphological changes. In gener...
Previous studies of alkali-activated slag cement (AASC) using nano-silica have mentioned mostly powdered nano-silica and binder weight replacement methods, which have a rapid decrease in fluidity, a short setting time and a low nano-silica replacemen...
This paper presents a laboratory investigation into the mechanical response of a silty sand, with a fines content of 10%, stabilized with colloidal silica (CS). To this end, a series of unconfined compression tests as well as monotonic and cyclic tri...
In this work, colloidal fouling by silica particles of different sizes on micro-patterned pristine and poly-(N-isopropylacylamide)-coated polyamide (PA) thin-film composite (TFC) membranes was studied. The competing impacts of surface micro-patternin...
The inadequate biosafety of MRI contrast agents (CAs) remains a challenging issue. Both increasing the magnetic relaxivity of CAs and targeting them through conjugation with folates are promising approaches to addressing this issue. Silica nanopartic...
Antireflective (AR) nanostructures offer an effective, broadband alternative to conventional AR coatings that could be used even under extreme conditions. In this publication, a possible fabrication process based on colloidal polystyrene (PS) nanosph...
Nano-composite films have been the subject of extensive work for developing the energy-storage efficiency of electrostatic capacitors. Factors such as polymer purity, nanoparticle size, and film morphology drastically affect the electrostatic efficie...
The effect of colloidal silica (CS) on the hydrate phases and microstructure evolution of calcium aluminate cement (CAC) was investigated. Samples hydrated with CS were obtained and characterized by X-ray diffraction (XRD), Field Emission Scanning El...
In the booming field of nanotechnology, colloidal silica (CS) has been introduced for ground improvement and liquefaction mitigation. It possesses a great ability to restrain pore pressure generation during seismic events by using an innovative stabi...
Colloidal nano-silica (CNS) was used to improve the mechanical and impermeability characteristics of mortar in this study. The samples were prepared with 0%, 1%, 2% and 3% (solid content) CNS addition. The mechanical strength and permeability of each...
Designing a robust direct compression (DC) formulation for an active pharmaceutical ingredient (API) with poor flow and compaction properties at a high API load is challenging. This study tackled two challenges: the unfavorable flow characteristics a...
Medical-grade ultrahigh molecular weight polyethylene (UHMWPE) is the material of choice for sliding surfaces in various articular joint implants owing to its excellent biocompatibility and superior physical properties, such as an exceptionally low c...
Previous reports have shown that colloidal crystal (CC) films with visible Bragg reflection characteristics can be fabricated by the surface modification of monodisperse silica particles (SiPs) with poly(methyl methacrylate) (PMMA) chains, followed b...
Binder jetting is the most widely implemented additive technology for the fabrication of sand molds. However, the use of furan binder-jetting technology in the production of molds for vacuum casting is hindered by the thermal destruction of the furan...
This study investigates the effect of a 30 wt.% solid-content colloidal nano-silica (CNS) suspension, incorporated at 0–6 wt.% of cement, on the early-age (7 and 14 days) and later-age (28 and 56 days) compressive strength and microstructure of...
We combined a nickel–aluminum–zirconium complex hydroxide (NAZ) with colloidal silica as a binder to prepare a granulated agent for adsorbing heavy metals from aqueous media. Three samples with different particle diameters were prepared t...
This study investigates the optimization of sol–silicate façade coatings modified with colloidal silica and a silane-based hydrophobizing additive to enhance hydrophobicity while maintaining a high water-vapor transmission rate (V). The...
In this paper, we propose a modified gravity method by introducing centrifugal force to promote the stacking of silica particles and the order of formed colloidal crystals. In this method, a monodispersed silica colloidal solution is filled into empt...
This paper presents an analysis of the fouling of a ceramic membrane by a mixture containing high concentrations of humic acid and colloidal silica during cross-flow ultrafiltration under various operating conditions. Two types of feed water were tes...
In this paper, a wavelength tunable colloidal-crystal laser with monodispersed silica particles was demonstrated. Silica particles were synthesized through the modified Stöber process and self-assembled into the colloidal photonic-crystal struct...
Nowadays, numerous researches are being performed to formulate nontoxic multifunctional magnetic materials possessing both high colloidal stability and magnetization, but there is a demand in the prediction of chemical and colloidal stability in wate...
This study reports the size-dependent interactions of silica nanoparticle (NP) dispersions with oil, which facilitate oil recovery from sandstone rock. Herein, we studied various 7–22 nm sized colloidal silica NPs (CSNPs; the colloidal state when dis...
Fucosylated glycosaminoglycans (FGs) derived from sea cucumbers exhibit potent intrinsic Xase (iXase) inhibition, anticoagulation, and antithrombosis. Plasma activated partial thromboplastin time (APTT), a widely used screening test worldwide, is cru...
Many attempts have been made to fabricate various types of inorganic nanoparticle-filled polymers (filler/polymer nanocomposites) by a mechanical or chemical approach. However, these approaches require modification of the nanofiller surfaces and/or c...
Quartz glass is a typical optical material. In this research, colloidal silica (SiO2) and colloidal cerium oxide (CeO2) are used as abrasive grains to polish quartz glass in the shear thickening polishing (STP) process. The STP method employs the she...
A polyester fabric with rectangular openings was used as a sacrificial template for the guiding of a sub-micron sphere (polystyrene (PS) and silica) aqueous colloid self-assembly process during evaporation as a patterned colloidal crystal (PCC). This...
Biomolecular corona is spontaneously formed on the surface of nanoparticles (NPs) when they are in contact with biological fluids. It plays an important role in the colloidal stability of NPs, which is of importance for most of their medical applicat...
In this paper, we describe the synthesis of multilayer nanoparticles as a platform for the diagnosis and treatment of ischemic injuries. The platform is based on magnetite (MNP) and silica (SNP) nanoparticles, while quinacrine is used as an anti-isch...
of 7