Skip to Content

2,410 Results Found

  • Article
  • Open Access
7 Citations
4,207 Views
14 Pages

Surface Modification of Poly(l-lactic acid) through Stereocomplexation with Enantiomeric Poly(d-lactic acid) and Its Copolymer

  • Qianjin Zhu,
  • Kaixin Chang,
  • Liyan Qi,
  • Xinyi Li and ,
  • Woming Gao and
  • Qinwei Gao
  • + 1 author+ 0 author

27 May 2021

Poly(l-lactic acid) with high molecular weight was used to prepare PLLA films by means of the solvent casting technique. Poly(d-lactic acid) (PDLA) and poly(d-lactic acid-co-glucose) copolymer (PDLAG) with a low molecular weight were synthesized from...

(This article belongs to the Section Polymer Chemistry)
  • Review
  • Open Access
75 Citations
12,512 Views
24 Pages

Poly(lactic acid)-Based Blends: A Comprehensive Review

  • Leonid Ilyich Vayshbeyn,
  • Elena Evgenyevna Mastalygina,
  • Anatoly Aleksandrovich Olkhov and
  • Maria Victorovna Podzorova

20 April 2023

Aliphatic and aromatic polyesters of hydroxycarboxylic acids are characterized not only by biodegradability, but also by biocompatibility and inertness, which makes them suitable for use in different applications. Polyesters with high enzymatic hydro...

(This article belongs to the Special Issue Functional Polymers: Synthesis, Properties and Applications)
  • Article
  • Open Access
20 Citations
7,440 Views
20 Pages

Synthesis and Modeling of Poly(L-lactic acid) via Polycondensation of L-Lactic Acid

  • Alexis Theodorou,
  • Vasilios Raptis,
  • Chrissie Isabella Maria Baltzaki,
  • Thrassyvoulos Manios and ,
  • Vagelis Harmandaris and
  • Kelly Velonia
  • + 1 author+ 0 author

29 November 2023

We present synthetic experiments of lactic acid (LA) polycondensation to produce poly(lactic acid) (PLA) as well as kinetic modeling calculations that capture the polymer molecular weight increase with time, given the initial concentrations. Tin-octo...

(This article belongs to the Special Issue State-of-the-Art Polymer Science and Technology in Greece: 2nd Edition)
  • Article
  • Open Access
10 Citations
4,082 Views
18 Pages

3 June 2020

Due to the brittle nature of poly(lactic acid) many attempts have been made to flexibilize this polyester for applications such as thin films and foils. However, due to complex phase behavior, many drawbacks for plasticizer and blend components are d...

(This article belongs to the Special Issue Biobased Polymers)
  • Article
  • Open Access
19 Citations
3,792 Views
12 Pages

Poly(lactic acid) Degradation by Recombinant Cutinases from Aspergillus nidulans

  • Eric Alvarado,
  • Rafael Castro,
  • José Augusto Castro-Rodríguez,
  • Arturo Navarro and
  • Amelia Farrés

12 July 2024

Poly(lactic-acid) (PLA) is a biodegradable polymer widely used as a packaging material. Its monomer, lactic acid, and its derivatives have been used in the food, cosmetic, and chemical industries. The accumulation of PLA residues leads to the develop...

(This article belongs to the Special Issue Degradation of Plastics)
  • Article
  • Open Access
44 Citations
12,769 Views
12 Pages

15 November 2017

This study aimed to evaluate the effect of styrene-assisted maleic anhydride-grafted poly(lactic acid) (PLA-g-St/MAH) on the interfacial properties of wood flour/poly(lactic acid) (PLA) bio-composites. PLA-g-St/MAH was synthesized by free-radical mel...

(This article belongs to the Special Issue Bio-Based Resins and Crosslinked Polymers from Renewable Resources)
  • Article
  • Open Access
31 Citations
6,469 Views
18 Pages

19 September 2022

Generally, poly(ethylene glycol) (PEG) is added to poly(lactic acid) (PLA) to reduce brittleness and improve mechanical properties. However, shape memory properties of PEG/PLA blends suffered due to the blend’s incompatibility. To enhance shape...

(This article belongs to the Section Smart and Functional Polymers)
  • Review
  • Open Access
45 Citations
7,362 Views
15 Pages

A Review: Research Progress in Modification of Poly (Lactic Acid) by Lignin and Cellulose

  • Sixiang Zhai,
  • Qingying Liu,
  • Yuelong Zhao,
  • Hui Sun and ,
  • Biao Yang and
  • Yunxuan Weng
  • + 1 author+ 0 author

3 March 2021

With the depletion of petroleum energy, the possibility of prices of petroleum-based materials increasing, and increased environmental awareness, biodegradable materials as a kind of green alternative have attracted more and more research attention....

(This article belongs to the Special Issue Design and Modification of Bio-Based Polymers, Blends and Composites)
  • Article
  • Open Access
58 Citations
9,206 Views
11 Pages

Surface Functional Poly(lactic Acid) Electrospun Nanofibers for Biosensor Applications

  • Edurne González,
  • Larissa M. Shepherd,
  • Laura Saunders and
  • Margaret W. Frey

14 January 2016

In this work, biotin surface functionalized hydrophilic non-water-soluble biocompatible poly(lactic acid) (PLA) nanofibers are created for their potential use as biosensors. Varying concentrations of biotin (up to 18 weight total percent (wt %)) were...

(This article belongs to the Special Issue Electrospun Materials)
  • Review
  • Open Access
16 Citations
5,985 Views
28 Pages

Potential Use of Cow Manure for Poly(Lactic Acid) Production

  • Ricard Garrido,
  • Luisa F. Cabeza,
  • Víctor Falguera and
  • Omar Pérez Navarro

14 December 2022

Cow manure is an abundant residue and poses a problem regarding recycling. Intensive animal farming produces manure, which, if not properly managed, can contaminate nearby water bodies and soils with nutrient excess. There are 1.9 billion cattle worl...

(This article belongs to the Special Issue Prospects and Challenges of Bioeconomy Sustainability Assessment)
  • Article
  • Open Access
13 Citations
4,554 Views
17 Pages

Preparation and Properties of Stereocomplex of Poly(lactic acid) and Its Amphiphilic Copolymers Containing Glucose Groups

  • Liyan Qi,
  • Qianjin Zhu,
  • Dan Cao,
  • Tingting Liu and ,
  • Kevin R Zhu,
  • Kaixin Chang and
  • Qinwei Gao
  • + 2 authors+ 0 author

31 March 2020

The stereocomplex of poly(lactic acid) containing glucose groups (sc-PLAG) was prepared by solution blending from equal amounts of poly(l-lactic acid) (PLLA) and poly(d-lactic acid-co-glucose) (PDLAG), which were synthesized from l- and d-lactic acid...

  • Article
  • Open Access
35 Citations
6,970 Views
13 Pages

Kinetics of Alkyl Lactate Formation from the Alcoholysis of Poly(Lactic Acid)

  • Fabio M. Lamberti,
  • Luis A. Román-Ramírez,
  • Paul Mckeown,
  • Matthew D. Jones and
  • Joseph Wood

24 June 2020

Alkyl lactates are green solvents that are successfully employed in several industries such as pharmaceutical, food and agricultural. They are considered prospective renewable substitutes for petroleum-derived solvents and the opportunity exists to o...

(This article belongs to the Section Environmental and Green Processes)
  • Article
  • Open Access
11 Citations
9,599 Views
16 Pages

16 March 2015

Degradable aliphatic polyesters such as poly(lactic acid) are widely used in biomedical applications, however, they lack functional moieties along the polymer backbone that are amenable for functionalization reactions or could be the basis for intera...

(This article belongs to the Special Issue Ring-Opening Polymerization)
  • Article
  • Open Access
33 Citations
4,884 Views
12 Pages

11 September 2021

In this study, cellulose nanofibrils (CNFs) were modified by catalyzed lactic acid esterification in an aqueous medium with SnCl2 as a catalyst. Films were made from unmodified and lactic acid-modified CNF without a polymer matrix to evaluate the eff...

(This article belongs to the Section Bio-Engineered Materials)
  • Article
  • Open Access
6 Citations
2,368 Views
9 Pages

29 December 2022

Humic substances are constituents of organic matter that require removal from water environments because of their adverse ecological and sanitation effects. A mixture of hydrogarnet and poly(lactic acid) dissolved in chloroform was electrospun to pre...

(This article belongs to the Topic Emerging Materials in Water and Waste Remediation Processes)
  • Review
  • Open Access
10 Citations
2,507 Views
23 Pages

14 November 2025

The growing demand for sustainable materials has intensified research on biodegradable polymers, particularly poly(ε-caprolactone) (PCL), poly(lactic acid) (PLA), and their blends. PLA and PCL offer biocompatibility and biodegradability, maki...

(This article belongs to the Special Issue Functional/Structural Polymers and Composites Produced by the Addition of Plant Biomass or Waste Materials Using Various Production Technologies)
  • Review
  • Open Access
86 Citations
21,288 Views
40 Pages

Poly(lactic acid) and Its Blends for Packaging Application: A Review

  • Stefano De Luca,
  • Daniel Milanese,
  • Duccio Gallichi-Nottiani,
  • Antonella Cavazza and
  • Corrado Sciancalepore

10 November 2023

Biopolymers obtained from renewable resources are an interesting alternative to conventional polymers obtained from fossil resources, as they are sustainable and environmentally friendly. Poly(lactic acid) (PLA) is a biodegradable aliphatic polyester...

(This article belongs to the Special Issue Valorization of Industrial and Agro Waste)
  • Review
  • Open Access
22 Citations
18,621 Views
13 Pages

13 January 2024

Acne scars, particularly atrophic ones, present a persistent challenge in cosmetic medicine and surgery, requiring extended and multifaceted treatment approaches. Poly-(lactic acid) injectable fillers show promise in managing atrophic acne scars by s...

(This article belongs to the Section Plastic, Reconstructive and Aesthetic Surgery/Aesthetic Medicine)
  • Article
  • Open Access
61 Citations
5,789 Views
13 Pages

18 January 2021

To enhance the mechanical strength and bioactivity of poly(lactic acid) (PLA) to the level that can be used as a material for spinal implants, poly(glycolic acid) (PGA) fibers and hydroxyapatite (HA) were introduced as fillers to PLA composites. To i...

(This article belongs to the Section Nanocomposite Materials)
  • Article
  • Open Access
33 Citations
4,548 Views
11 Pages

25 February 2021

Poly(lactic-co-glycolic acid) (PLGA) and poly(caprolactone-co-glycolic acid) (PCLGA) solutions were electrospun into membranes with tailored fiber diameter of 1.8 μm. This particular fiber diameter was tuned depending on the used co-polymer by adjust...

(This article belongs to the Special Issue Biopolymers for Medical and Pharmaceutical Applications)
  • Article
  • Open Access
30 Citations
9,236 Views
12 Pages

Preparation and Characterization of Films Extruded of Polyethylene/Chitosan Modified with Poly(lactic acid)

  • Jesús Manuel Quiroz-Castillo,
  • Dora Evelia Rodríguez-Félix,
  • Heriberto Grijalva-Monteverde,
  • Lauren Lucero Lizárraga-Laborín and ,
  • María Mónica Castillo-Ortega,
  • Teresa Del Castillo-Castro,
  • Francisco Rodríguez-Félix and
  • Pedro Jesús Herrera-Franco
  • + 3 authors+ 0 author

30 December 2014

The use of mixtures of synthetic and natural polymers is a potential option to reduce the pollution by plastic waste. In this work, the method for the chemical modification of chitosan with poly(lactic acid) was developed; then, the preparation of fi...

  • Review
  • Open Access
258 Citations
19,125 Views
37 Pages

Poly(Lactic Acid)-Based Microparticles for Drug Delivery Applications: An Overview of Recent Advances

  • Antonios Vlachopoulos,
  • Georgia Karlioti,
  • Evangelia Balla,
  • Vasileios Daniilidis and ,
  • Theocharis Kalamas,
  • Myrika Stefanidou,
  • Nikolaos D. Bikiaris,
  • Evi Christodoulou,
  • Ioanna Koumentakou and
  • Dimitrios N. Bikiaris
  • + 6 authors+ 1 author

The sustained release of pharmaceutical substances remains the most convenient way of drug delivery. Hence, a great variety of reports can be traced in the open literature associated with drug delivery systems (DDS). Specifically, the use of micropar...

(This article belongs to the Special Issue New Technology for Prolonged Drug Release)
  • Article
  • Open Access
124 Citations
14,989 Views
15 Pages

Effects of Graphene Nanoplatelets and Reduced Graphene Oxide on Poly(lactic acid) and Plasticized Poly(lactic acid): A Comparative Study

  • Buong Woei Chieng,
  • Nor Azowa Ibrahim,
  • Wan Md Zin Wan Yunus,
  • Mohd Zobir Hussein and ,
  • Yoon Yee Then and
  • Yuet Ying Loo
  • + 1 author+ 0 author

21 August 2014

The superlative mechanical properties of graphene-based materials make them the ideal filler materials for polymer composites reinforcement. Two types of graphene-based materials, graphene nanoplatelets (xGnP) and reduced graphene oxide (rGO), were...

  • Article
  • Open Access
31 Citations
10,738 Views
13 Pages

27 April 2011

In some traumatic nerve injuries, autologous nerve grafting is the first choice for bridging the gap between the severed nerve ends. However, this therapeutic strategy has some disadvantages, including permanent loss of donor function and requirement...

(This article belongs to the Special Issue Biofunctional Polymers for Medical Applications)
  • Review
  • Open Access
2,063 Views
43 Pages

To address the global water crisis, desalination technologies contribute about 1% of the global freshwater supply. Membrane-based desalination technologies offer high performance, operational ease, cost-effectiveness and high scalability compared to...

(This article belongs to the Special Issue Advances in Membrane Desalination and Sustainable Technology Systems)
  • Article
  • Open Access
41 Citations
6,208 Views
12 Pages

Photodegradation and Biodegradation of Poly(Lactic) Acid Containing Orotic Acid as a Nucleation Agent

  • Jan Salač,
  • Jana Šerá,
  • Martin Jurča,
  • Vincent Verney and ,
  • Adam A. Marek and
  • Marek Koutný
  • + 1 author+ 0 author

4 February 2019

Orotic acid is a natural heterocyclic compound that acts as a nucleation agent in poly(lactic acid) (PLA). PLA materials with increasing orotic acid content were prepared and characterized. It was found that crystallinity of about 28% was reached wit...

(This article belongs to the Special Issue Biodegradable Polymeric Composites: Development and Industrial Applications)
  • Article
  • Open Access
1,688 Views
18 Pages

23 December 2025

Poly(lactic acid) (PLA) has strong potential for use in sustainable packaging, automotive components, and structural materials; however, its inherent brittleness and limited thermal stability restrict broader application. To overcome these drawbacks,...

(This article belongs to the Special Issue Inorganic Filler-Based Polymeric Composites for Enhanced Mechanical and Thermal Properties)
  • Article
  • Open Access
10 Citations
8,598 Views
15 Pages

Size-Controlled Nanomicelles of Poly(lactic acid)–Poly(ethylene glycol) Copolymers with a Multiblock Configuration

  • Shota Somekawa,
  • Kazunari Masutani,
  • Yu-I Hsu,
  • Atsushi Mahara and ,
  • Yoshiharu Kimura and
  • Tetsuji Yamaoka
  • + 1 author+ 0 author

23 June 2015

The ability to control the micelle size of poly(lactic acid) and poly(ethylene glycol) (PLA–PEG) block copolymers is important for controlling their circulation in blood cell recognition, drug release and therapeutic effects. We successfully controll...

  • Article
  • Open Access
14 Citations
3,537 Views
21 Pages

Sonochemical Synthesis of Magnetite/Poly(lactic acid) Nanocomposites

  • Juliene Oliveira Campos de França,
  • Quezia dos Santos Lima,
  • Mariana Martins de Melo Barbosa,
  • Ana Lívia Fernandes Fonseca and ,
  • Guilherme de França Machado,
  • Sílvia Cláudia Loureiro Dias and
  • José Alves Dias
  • + 2 authors+ 0 author

11 December 2023

Nanocomposites based on poly(lactic acid) (PLA) and magnetite nanoparticles (MNP-Fe3O4) show promise for applications in biomedical treatments. One key challenge is to improve the stabilization and dispersion of MNP-Fe3O4. To address this, we synthes...

(This article belongs to the Special Issue Polymers and Metals from Nano- to Macro-Scale: Composite Materials and Coatings)
  • Article
  • Open Access
13 Citations
7,303 Views
17 Pages

13 February 2024

Commercially available poly(lactic acid) exhibits poor hydrolytic stability, which makes it impossible for use in durable applications. Therefore, a novel hydrolysis inhibitor based on an aziridine derivative as well as a novel stabilizer composition...

(This article belongs to the Section Biobased and Biodegradable Polymers)
  • Article
  • Open Access
29 Citations
4,741 Views
15 Pages

Effects of Acid-Anhydride-Modified Cellulose Nanofiber on Poly(Lactic Acid) Composite Films

  • Naharullah Jamaluddin,
  • Yu-I Hsu,
  • Taka-Aki Asoh and
  • Hiroshi Uyama

17 March 2021

In this study, we investigated the effect of the addition of cellulose nanofiber (CNF) fillers on the performance of poly(lactic acid) (PLA). Modification of the hydroxyl group of cellulose to the acyl group by acid anhydrides changed the compatibili...

(This article belongs to the Special Issue Nanomaterials for Advanced Biological Applications)
  • Proceeding Paper
  • Open Access
72 Views
8 Pages

Thermomechanical Degradation of Poly(lactic acid) in an Internal Mixer

  • Virág Luca Kőszegi-Bódi,
  • Sándor Kálmán Jakab and
  • László Lendvai

4 November 2026

In the present study, the sensitivity of poly(lactic acid) (PLA) to thermomechanical degradation was investigated using a Brabender internal mixer (50EHT) equipped with roller-type blades. The effect of residence time was examined by varying it from...

(This article belongs to the Proceedings of The Sustainable Mobility and Transportation Symposium 2026)
  • Article
  • Open Access
33 Citations
7,232 Views
16 Pages

Poly(Lactic Acid) Blends with Poly(Trimethylene Carbonate) as Biodegradable Medical Adhesive Material

  • Shuang Zhang,
  • Hongli Li,
  • Mingwei Yuan,
  • Minglong Yuan and
  • Haiyun Chen

28 September 2017

A novel medical adhesive was prepared by blending poly(lactic acid) (PLA) with poly(trimethylene carbonate) (PTMC) in ethyl acetate, and the two materials were proven to be biodegradable and biocompatible. The medical adhesive was characterized by 1H...

(This article belongs to the Special Issue Novel Biomaterials for Tissue Engineering 2018)
  • Article
  • Open Access
37 Citations
5,624 Views
12 Pages

Characterization of Natural Composites Fabricated from Abutilon-Fiber-Reinforced Poly (Lactic Acid)

  • Hua Wang,
  • Elwathig. A. M. Hassan,
  • Hafeezullah Memon,
  • Tienah. H. H. Elagib and
  • Fadlelmoula Abad AllaIdris

2 September 2019

In recent decades, natural-fiber-reinforced poly (lactic acid) (PLA) composites have received a great deal of attention. In this study, biocomposites of poly (lactic acid) and abutilon fibers are prepared by using melt blending and an extruder. The e...

(This article belongs to the Section Materials Processes)
  • Article
  • Open Access
27 Citations
5,992 Views
12 Pages

26 March 2021

In this work, we present a functionalization strategy of starch-poly(lactic acid) (PLA) blends with organic acids. Lactic and acetic acid were used as acid agents, and oleic acid was also included in the previous acids, with the aim of finding a syne...

(This article belongs to the Special Issue Tailoring Polymeric Materials for Specific Applications)
  • Abstract
  • Open Access
2 Citations
1,654 Views
2 Pages

Poly(L-lactic) acid (PLLA) is a biocompatible and biodegradable semicrystalline synthetic polymer that has considerable potential as a scaffold for tissue engineering, especially that related to bone regeneration [...]

(This article belongs to the Proceedings of MATERIAIS 2022)
  • Review
  • Open Access
188 Citations
30,623 Views
14 Pages

26 February 2016

Polycondensation and ring-opening polymerization are two important polymer synthesis methods. Poly(lactic acid), the most typical biodegradable polymer, has been researched extensively from 1900s. It is of significant importance to have an up-to-date...

(This article belongs to the Special Issue Biodegradable and Bio-Based Polymers)
  • Review
  • Open Access
95 Citations
12,951 Views
18 Pages

27 December 2023

Poly(lactic acid) (PLA) is a polyester attracting growing interest every year in different application fields, such as packaging, cosmetics, food, medicine, etc. Despite its significant advantages, it has low elasticity that may hinder further develo...

(This article belongs to the Special Issue Advances in Biocompatible and Biodegradable Polymers III)
  • Article
  • Open Access
58 Citations
9,395 Views
10 Pages

Epoxidized Jatropha Oil as a Sustainable Plasticizer to Poly(lactic Acid)

  • Buong Woei Chieng,
  • Nor Azowa Ibrahim,
  • Yoon Yee Then and
  • Yuet Ying Loo

2 June 2017

A renewable resource, epoxidized jatropha oil (EJO), was used as a green plasticizer and added to poly(lactic acid) (PLA). EJO was compounded into PLA at different contents. The addition of 3 wt % EJO to the PLA demonstrates significant improvement i...

(This article belongs to the Special Issue Biodegradable and Biobased Polyesters)
  • Feature Paper
  • Article
  • Open Access
47 Citations
5,955 Views
19 Pages

Poly(Lactic Acid)-Based Nanobiocomposites with Modulated Degradation Rates

  • Iozzino Valentina,
  • Askanian Haroutioun,
  • Leroux Fabrice,
  • Verney Vincent and
  • Pantani Roberto

11 October 2018

In the field of biodegradable polymers such as poly(Lactic Acid) (PLA), it is quite well known that their kinetics of hydrolysis strongly depend on the pH of the hydrolyzing medium. The idea explored during this study focused on PLA, is the addition...

(This article belongs to the Special Issue Durability and Life time of Polymers, Composites and Nanocomposites)
  • Article
  • Open Access
23 Citations
5,472 Views
11 Pages

Effect of Silane Functionalization on Properties of Poly(Lactic Acid)/Palygorskite Nanocomposites

  • Anton Kasprzhitskii,
  • Georgy Lazorenko,
  • Alexander Kruglikov,
  • Irina Kuchkina and
  • Vadim Gorodov

Poly(lactic acid) (PLA)/palygorskite (Paly) nanocomposites were prepared using the melt compounding technique. Paly modified by 3-aminopropyltriethoxysilane (APTES) and vinyltrimethoxysilane (VTMS) was used as nanofiller for PLA with concentrations i...

  • Article
  • Open Access
20 Citations
5,125 Views
19 Pages

Glycerolysis of Poly(lactic acid) as a Way to Extend the “Life Cycle” of This Material

  • Marcin Borowicz,
  • Joanna Paciorek-Sadowska,
  • Marek Isbrandt,
  • Łukasz Grzybowski and
  • Bogusław Czupryński

29 November 2019

The article concerns the use of glycerolysis reaction as an alternative method of processing post-production and post-consumer waste from poly(lactic acid) (PLA). Management of waste is a very important issue from an environmental protection and econ...

(This article belongs to the Special Issue Environmentally-Friendly Polymeric Materials Based on Recycling and Bio-Based Components)
  • Article
  • Open Access
14 Citations
3,969 Views
20 Pages

28 January 2025

In this study, the biodegradability of poly(lactic acid) (PLA), the most widely produced bioplastic, and poly(3-hydroxybutyrate) (PHB), known for its very biodegradability, was investigated in soil and soil amended with nitrogen sources, such as trea...

(This article belongs to the Section Biobased and Biodegradable Polymers)
  • Article
  • Open Access
42 Citations
12,863 Views
11 Pages

Synthesis of Poly(Lactic Acid-co-Glycolic Acid) Copolymers with High Glycolide Ratio by Ring-Opening Polymerisation

  • Alastair Little,
  • Alan M. Wemyss,
  • David M. Haddleton,
  • Bowen Tan and ,
  • Zhaoyang Sun,
  • Yang Ji and
  • Chaoying Wan
  • + 2 authors+ 0 author

26 July 2021

The rise in demand for biodegradable plastic packaging with high barrier properties has spurred interest in poly(lactic acid-co-glycolic acid) (PLGA) copolymers with a relatively high glycolide content. In this work, we examined how reaction conditio...

(This article belongs to the Special Issue Feature Papers in Biomacromolecules, Biobased and Biodegradable Polymers)
  • Article
  • Open Access
20 Citations
3,866 Views
15 Pages

Improvement of Poly(lactic acid)-Poly(hydroxy butyrate) Blend Properties for Use in Food Packaging: Processing, Structure Relationships

  • Mitul Kumar Patel,
  • Marta Zaccone,
  • Laurens De Brauwer,
  • Rakesh Nair and ,
  • Marco Monti,
  • Vanesa Martinez-Nogues,
  • Alberto Frache and
  • Kristiina Oksman
  • + 3 authors+ 0 author

24 November 2022

Poly(lactic acid)-poly(hydroxybutyrate) (PLA-PHB)-based nanocomposite films were prepared with bio-based additives (CNCs and ChNCs) and oligomer lactic acid (OLA) compatibilizer using extrusion and then blown to films at pilot scale. The aim was to i...

(This article belongs to the Topic Polymers from Renewable Resources)
  • Review
  • Open Access
150 Citations
11,765 Views
33 Pages

Review on the Degradation of Poly(lactic acid) during Melt Processing

  • Ineke Velghe,
  • Bart Buffel,
  • Veerle Vandeginste,
  • Wim Thielemans and
  • Frederik Desplentere

25 April 2023

This review paper presents an overview of the state of the art on process-induced degradation of poly(lactic acid) (PLA) and the relative importance of different processing variables. The sensitivity of PLA to degradation, especially during melt proc...

(This article belongs to the Special Issue Advances in Sustainable Polymers: Processing, Modeling, Properties and Applications)
  • Article
  • Open Access
23 Citations
9,520 Views
8 Pages

NMR Analysis of Poly(Lactic Acid) via Statistical Models

  • Koto Suganuma,
  • Tetsuo Asakura,
  • Miyuki Oshimura,
  • Tomohiro Hirano and ,
  • Koichi Ute and
  • H. N. Cheng
  • + 1 author+ 0 author

19 April 2019

The physical properties of poly(lactic acid) (PLA) are influenced by its stereoregularity and stereosequence distribution, and its polymer stereochemistry can be effectively studied by NMR spectroscopy. In previously published NMR studies of PLA tact...

(This article belongs to the Special Issue NMR in Polymer Science)
  • Article
  • Open Access
1 Citations
2,624 Views
12 Pages

15 February 2023

The paper presents the influence of the loading modelling on the simulation process results of the bending behaviour for 3D printed structures. The study is done on structures having different geometries of the cross section, and the type of structur...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
19 Citations
4,052 Views
16 Pages

Eco-Friendly Method for Tailoring Biocompatible and Antimicrobial Surfaces of Poly-L-Lactic Acid

  • Magdalena Aflori,
  • Maria Butnaru,
  • Bianca-Maria Tihauan and
  • Florica Doroftei

13 March 2019

In this study, a facile, eco-friendly route, in two steps, for obtaining of poly-L-lactic acid/chitosan-silver nanoparticles scaffolds under quiescent conditions was presented. The method consists of plasma treatment and then wet chemical treatment o...

(This article belongs to the Special Issue Green Synthesis of Nanomaterials)
  • Review
  • Open Access
55 Citations
26,736 Views
18 Pages

Poly-d,l-lactic Acid (PDLLA) Application in Dermatology: A Literature Review

  • Kar Wai Alvin Lee,
  • Lisa Kwin Wah Chan,
  • Angela Wai Kay Lee,
  • Cheuk Hung Lee and ,
  • Sky Tin Hau Wong and
  • Kyu-Ho Yi
  • + 1 author+ 0 author

13 September 2024

Poly-d,l-lactic acid (PDLLA) is a biodegradable and biocompatible polymer that has garnered significant attention in dermatology due to its unique properties and versatile applications. This literature review offers a comprehensive analysis of PDLLA&...

(This article belongs to the Section Polymer Applications)

of 49