Skip to Content

1,567 Results Found

  • Review
  • Open Access
50 Citations
13,685 Views
24 Pages

Nanocomposites for Improved Physical Durability of Porous PVDF Membranes

  • Chi Yan Lai,
  • Andrew Groth,
  • Stephen Gray and
  • Mikel Duke

24 February 2014

Current commercial polymer membranes have shown high performance and durability in water treatment, converting poor quality waters to higher quality suitable for drinking, agriculture and recycling. However, to extend the treatment into more challen...

(This article belongs to the Section Inorganic Membranes)
  • Feature Paper
  • Article
  • Open Access
21 Citations
4,524 Views
16 Pages

20 October 2020

The research presented in this article analysed the influence of incorporating precast concrete waste as an alternative to coarse aggregate in self-compacting concrete to generate new precast elements. The experimental study involved the characteriza...

(This article belongs to the Special Issue Advances in High-Performance of Eco-Efficient Concrete)
  • Article
  • Open Access
17 Citations
3,870 Views
14 Pages

A Comprehensive Experimental Study on the Physical Performance and Durability of Bamboo Bio-Concrete

  • Vanessa M. Andreola,
  • M’hamed Y. R. da Gloria,
  • Marco Pepe and
  • Romildo D. Toledo Filho

22 June 2024

In recent decades, the building sector has been moving toward promoting renewable raw materials to reduce greenhouse gas emissions associated with construction materials. One of the most valuable alternatives is the use of large-volume fractions of v...

(This article belongs to the Section Sustainable Materials)
  • Article
  • Open Access
4 Citations
1,400 Views
25 Pages

5 August 2025

The construction industry plays a major role in the consumption of natural resources and the generation of waste. Construction and demolition waste (CDW) is produced in substantial volumes globally and is widely available. Its accumulation poses seri...

(This article belongs to the Special Issue Research on Sustainable Materials in Building and Construction)
  • Systematic Review
  • Open Access
1,043 Views
61 Pages

Performance of Recycled Concrete Aggregate and Reclaimed Asphalt Pavement in Concrete: A Systematic Review of Mechanical, Physical, and Durability Characteristics

  • Ahmed Ashteyat,
  • Aye Alkhalaileh,
  • Mousa Shhabat,
  • Hebah Al-zu’bi and ,
  • Sultan Almuaythir and
  • Mahmoud Nawasreh
  • + 1 author+ 0 author

25 August 2026

The increasing generation of construction and demolition waste, along with the depletion of natural aggregates, has driven growing interest in recycled concrete aggregate (RCA) and reclaimed asphalt pavement (RAP) as sustainable alternatives in concr...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
7 Citations
3,498 Views
15 Pages

The Effect of Demolition Concrete Waste on the Physical, Mechanical, and Durability Characteristics of Concrete

  • Jian Tang,
  • Jingying Cao,
  • Hua Luo,
  • Weihua Chen and ,
  • Zhiyou Jia,
  • Sandra Cunha and
  • José Aguiar
  • + 2 authors+ 0 author

18 April 2024

With the development of urbanization, more and more construction and demolition waste (CDW) is generated. To enhance the mechanical properties and durability of concrete through the incorporation of recycled aggregate, the water/cement ratio was cont...

(This article belongs to the Special Issue Monitoring, Prevention and Control of Dynamic Disasters in Underground Space Engineering)
  • Article
  • Open Access
7 Citations
2,601 Views
20 Pages

13 August 2025

In this paper, a combined modification method using thermal modification and wax impregnation was investigated. The advantage of this method is that the two modification steps are completed in one step. Two different wood species, beech (Fagus sylvat...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
1 Citations
1,426 Views
21 Pages

1 August 2025

The operation of heavy-haul railway trains with large loads results in significant cracking issues in reinforced concrete beams. Atmospheric carbon dioxide, oxygen, and moisture from the atmosphere penetrate into the beam interior through these crack...

(This article belongs to the Special Issue Artificial Intelligence (AI)-Driven Full Lifecycle Management of Infrastructures: From Advanced Cementitious Materials to Durable Structures)
  • Article
  • Open Access
1 Citations
1,899 Views
17 Pages

19 September 2023

This study investigated the effects of mixture proportions and vibration levels on the physical properties, durability and performance of concrete used in Korean pavements. The strength and durability characteristics varied depending on the mixture p...

(This article belongs to the Special Issue Advanced Sustainable Low-Carbon Building Materials)
  • Article
  • Open Access
26 Citations
9,260 Views
19 Pages

The Potential of the Reed as a Regenerative Building Material—Characterisation of Its Durability, Physical, and Thermal Performances

  • Raphaele Malheiro,
  • Adriana Ansolin,
  • Christiane Guarnier,
  • Jorge Fernandes and ,
  • Maria Teresa Amorim,
  • Sandra Monteiro Silva and
  • Ricardo Mateus
  • + 2 authors+ 0 author

15 July 2021

Knowing the properties of vernacular materials is crucial to heritage conservation and to develop innovative solutions. Reed, considered to be a carbon-neutral and a carbon dioxide sink material, has been used for centuries for diverse uses. Its high...

(This article belongs to the Special Issue Volume II: Thermal Behaviour, Energy Efficiency in Buildings and Sustainable Construction)
  • Article
  • Open Access
11 Citations
3,047 Views
17 Pages

23 September 2020

In this study, the physical and durability properties of cementitious materials containing stainless steel argon-oxygen decarburization (AOD) slag were investigated by CO2 curing. Three contents (0, 30, 60%) of ordinary Portland cement (OPC) were rep...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
727 Views
17 Pages

Effect of Nano-Calcium Carbonate on Durability and Physical Properties of 3D-Printed Cement Mortar

  • Poopatai Chumpol,
  • Piti Sukontasukkul,
  • Worathep Sae-Long,
  • Thanongsak Imjai and ,
  • Chattarika Phiangphimai,
  • Phattharachai Pongsopha,
  • Suchart Limkatanyu and
  • Prinya Chindaprasirt
  • + 3 authors+ 0 author

Three-dimensional concrete printing (3DCP) offers an accurate, formwork-free, and resource-efficient construction process; however, the absence of vibration and compaction often results in increased porosity and reduced durability. This study investi...

(This article belongs to the Special Issue 3D-Printed Technology in Buildings)
  • Article
  • Open Access
22 Citations
4,457 Views
16 Pages

Physical, Mechanical and Durability Properties of Ecofriendly Ternary Concrete Made with Sugar Cane Bagasse Ash and Silica Fume

  • Laura Landa-Ruiz,
  • Aldo Landa-Gómez,
  • José M. Mendoza-Rangel,
  • Abigail Landa-Sánchez and ,
  • Hilda Ariza-Figueroa,
  • Ce Tochtli Méndez-Ramírez,
  • Griselda Santiago-Hurtado,
  • Victor M. Moreno-Landeros,
  • René Croche and
  • Miguel Angel Baltazar-Zamora
  • + 5 authors+ 0 author

24 August 2021

In the present investigation, the physical, mechanical and durability properties of six concrete mixtures were evaluated, one of conventional concrete (CC) with 100% Portland cement (PC) and five mixtures of Ecofriendly Ternary Concrete (ETC) made wi...

(This article belongs to the Special Issue New Frontiers in Cementitious and Lime-Based Materials and Composites)
  • Article
  • Open Access
34 Citations
9,008 Views
26 Pages

Physical, Mechanical, and Durability Properties of Concrete Containing Wood Chips and Sawdust: An Experimental Approach

  • Sara Dias,
  • António Tadeu,
  • João Almeida,
  • Pedro Humbert and ,
  • Julieta António,
  • Jorge de Brito and
  • Pedro Pinhão
  • + 2 authors+ 0 author

20 August 2022

With a circular economy in the spotlight, wood waste has emerged as an important secondary raw material. Bearing this in mind, a comprehensive experimental study was carried out to evaluate the feasibility of using concrete compositions containing wo...

(This article belongs to the Collection Advances in Sustainable Building Materials and Construction)
  • Article
  • Open Access
1 Citations
374 Views
24 Pages

1 September 2026

The effects of thermal modification, lactic acid (LA) impregnation, and their combined application on the physical properties and biological durability of European beech (Fagus sylvatica L.) were investigated to identify potential synergistic interac...

(This article belongs to the Special Issue Innovative Approaches to Modifying Wood and Wood-Based Material Properties in the 21st Century)
  • Article
  • Open Access
20 Citations
3,508 Views
18 Pages

23 July 2020

To complement the shortcomings of concrete surface treatment technology and improve the durability of concrete structure, the purpose of this study was to impregnate water-repellent performance into natural zeolite, which has many pores inside, to ac...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
14 Citations
7,436 Views
13 Pages

Anatomical, Physical, Chemical, and Biological Durability Properties of Two Rattan Species of Different Diameter Classes

  • Sheikh Ali Ahmed,
  • Reza Hosseinpourpia,
  • Christian Brischke and
  • Stergios Adamopoulos

17 January 2022

Rattan cane is an important forest product with economic value. Its anatomical, physical, and biological properties vary with the cane height. This makes it difficult to select the appropriate cane diameter for harvesting. Understanding the material...

(This article belongs to the Special Issue The Diversity of Wood and Non-Wood Forest Products: Anatomical, Physical and Chemical Properties, and Potential Applications)
  • Article
  • Open Access
641 Views
27 Pages

10 September 2026

Degradation processes forming as a result of direct and indirect environmental interactions with soluble salts are important for the structural material of marble and in geotechnical applications. This is necessary, not only to identify the source an...

(This article belongs to the Section Environmental Mineralogy and Biogeochemistry)
  • Article
  • Open Access
5 Citations
2,371 Views
10 Pages

Investigating the Effects of Al2O3 Microparticles on Wood Waste OSBs: A Study on Physical, Mechanical, and Durability Performance

  • Wanley Eduardo Lopes Junior,
  • Matheus Roberto Cabral,
  • André Luis Christoforo,
  • Cristiane Inácio de Campos and
  • Juliano Fiorelli

12 June 2023

The development of new materials for the construction sector is a global trend, and products that use by-products in their composition and have also incorporated technology are commercially competitive. Microparticles have large surface areas and can...

(This article belongs to the Section Biobased and Biodegradable Polymers)
  • Article
  • Open Access
28 Citations
3,323 Views
16 Pages

Influence of Mix Design on Physical, Mechanical and Durability Properties of Multi-Recycled Aggregate Concrete

  • Jeonghyun Kim,
  • Anna M. Grabiec,
  • Andrzej Ubysz,
  • Sungchul Yang and
  • Namho Kim

29 March 2023

The decrease in the quality of recycled aggregate due to an increase in the number of recycling is a primary factor that limits the multi-recycling of concrete. This degradation adversely affects concrete performance; thus, the characteristics of rec...

(This article belongs to the Special Issue Transforming Industrial Waste into Sustainable Construction Materials)
  • Article
  • Open Access
4 Citations
7,611 Views
10 Pages

High Levels of Physical Activity Reduce the Esthetic Durability of Botulinum Toxin Type A: A Controlled Single-Blind Clinical Trial

  • Omar Neves Morhy,
  • Andréa Lisbôa Sisnando,
  • Mariana Barbosa Câmara-Souza,
  • Ana Claudia Carbone and
  • Giancarlo De la Torre Canales

19 July 2023

The present study aimed to evaluate the influence of physical activity on the durability of the esthetic effect of botulinum toxin type A (BoNT-A). Sixty female patients were allocated to three groups (n = 20) according to their physical activity lev...

  • Article
  • Open Access
9 Citations
3,903 Views
18 Pages

Utilization of Mill Scale Waste as Natural Fine Aggregate Replacement in Mortar: Evaluation of Physical, Mechanical, Durability, and Post-Fire Properties

  • Apinun Siriwattanakarn,
  • Ampol Wongsa,
  • Nawapak Eua-Anant,
  • Vanchai Sata and ,
  • Piti Sukontasukkul and
  • Prinya Chindaprasirt
  • + 1 author+ 0 author

5 February 2025

The current paper presents the findings from experiments focused on using mill scale waste (MSW) as a natural fine aggregate (NFA) replacement in making cement mortar, aiming to recycle this material. Mortars were prepared by mixing with ordinary Por...

(This article belongs to the Topic Sustainable Building Materials)
  • Article
  • Open Access

Study on the Physical, Mechanical, Microscopic and Durability Properties of Artificial Aggregate from Waste Travertine Powder

  • Tianzhen Li,
  • Yichen Feng,
  • Kaiyang Wang,
  • Xiaonan Tang and ,
  • Jun Xia,
  • Chao Zhang,
  • Xueyang Miao,
  • Bin Xi and
  • Mengdi Liu
  • + 4 authors+ 0 author
Buildings2026, 16(22), 4639;https://doi.org/10.3390/buildings16224639 
(registering DOI)

20 November 2026

To promote the resource utilization of travertine waste and alleviate the shortage of natural aggregates, artificial aggregates were prepared by cold-bonding granulation using 70% waste travertine powder as the main raw material and 30% binders (ceme...

(This article belongs to the Special Issue Advances in Cementitious Materials and Concrete Structures)
  • Article
  • Open Access
1 Citations
620 Views
29 Pages

10 June 2026

The utilization of construction and demolition waste (CDW) as a supplementary cementitious material (SCM) represents a promising strategy for reducing cement consumption, minimizing environmental impacts, and promoting sustainable waste valorization....

(This article belongs to the Special Issue Advanced Composite Materials for Sustainable Construction)
  • Article
  • Open Access
6 Citations
1,498 Views
25 Pages

23 March 2026

The durability of reinforced concrete structures is significantly affected by the carbonation process, which decreases the alkalinity of the pore solution and initiates corrosion of the steel reinforcement. However, the square roots of time equations...

(This article belongs to the Special Issue Recent Progress in Sustainable Construction Materials)
  • Systematic Review
  • Open Access
163 Views
38 Pages

5 November 2026

During their service life, reinforced concrete structures are prone to reinforcement corrosion due to factors such as chloride salt attack and concrete carbonation, which lead to a decline in the load-bearing capacity and durability of the structural...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
2 Citations
5,368 Views
21 Pages

The use of concrete materials in Portugal, namely reinforced concrete, began in the 19th century. However, during the 20th century, the increase in the application of this composite material, alongside the use of hydraulic binders, led to a disruptio...

  • Article
  • Open Access
1 Citations
897 Views
27 Pages

Chloride-induced corrosion is one of the principal causes of deterioration in reinforced concrete infrastructure, making accurate prediction of chloride diffusion coefficients essential for durability assessment and service-life design. Existing mach...

(This article belongs to the Section Composites Applications)
  • Review
  • Open Access
39 Citations
8,370 Views
28 Pages

Application of Aggregates from Construction and Demolition Wastes in Concrete: Review

  • Hua Luo,
  • José Aguiar,
  • Xiaoqi Wan,
  • Yinggu Wang and ,
  • Sandra Cunha and
  • Zhiyou Jia
  • + 1 author+ 0 author

19 May 2024

In the current century, urbanization and the development of the construction industry have led to the generation of construction and demolition waste (CDW), imposing pressure on ecology and the environment. This has attracted the attention of industr...

(This article belongs to the Special Issue Sustainable Resource and Waste Management: Landfill Technology)
  • Review
  • Open Access
2 Citations
1,327 Views
34 Pages

16 July 2026

Black locust (Robinia pseudoacacia L.) has become an increasingly important tree species in Europe due to its rapid growth, adaptability and potential to provide durable timber under changing climatic conditions. This paper presents a review of the E...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
11 Citations
2,929 Views
16 Pages

29 September 2023

Wood waste bottom ash (WWBA) is a waste generated in power plants during the burning of forest residues to produce energy and heat. In 2019, approximately 19,800 tons of WWBA was generated only in Lithuania. WWBA is rarely recycled or reused and is m...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
13 Citations
3,268 Views
23 Pages

27 January 2023

The infrastructure demands for mega cities, urbanization and environmental concerns are pushing for smart and sustainable solutions. Structural lightweight concrete is gaining popularity in the concrete industry because of its intrinsic properties of...

  • Article
  • Open Access
26 Citations
3,416 Views
12 Pages

25 June 2022

The aim of this study is to investigate the effect of municipal solid waste incineration bottom ash from a cogeneration plant on the physical and mechanical properties and durability of cement concrete. Part of the cement in concrete mixtures tested...

(This article belongs to the Special Issue Concretes and Cement-Based Composites: Additives/Admixtures, Hydration Process and Durability Research)
  • Article
  • Open Access
113 Citations
25,305 Views
18 Pages

12 June 2020

In order to reduce the dependency on conventional materials and negative environmental impacts, one of the main responsibilities of the construction field is to find new eco-friendly resources to replace the traditional materials partially. Natural f...

(This article belongs to the Special Issue Cementitious Composites Reinforced with Recycled and Natural Fibers: Experimental Results and Numerical Modelling 2019)
  • Article
  • Open Access
2,893 Views
21 Pages

2 December 2024

Porous asphalt pavements need to be cured for 24 h~48 h before they can be opened to traffic. In an emergency, physical cooling methods, such as water sprinkling and air blowing, can be used to accelerate cooling, but the effects of the two methods o...

  • Article
  • Open Access
2 Citations
1,202 Views
29 Pages

Accelerated Carbonation as a Potential Alternative for Autoclaved Fiber Cement Material—A Comparison in Macro and Micro Scale

  • Adriano Galvão Souza Azevedo,
  • Igor Machado Silva Parente,
  • Carlos Alexandre Fioroni and
  • Holmer Savastano

This study investigates accelerated carbonation as a low-energy alternative to autoclave curing in the production of fiber cement composites reinforced with lignocellulosic fibers. The effects of both curing routes on physical–mechanical perfor...

(This article belongs to the Special Issue Surface and Interfacial Engineering Strategies for Fiber-Reinforced Cementitious Composites)
  • Article
  • Open Access
54 Citations
3,776 Views
22 Pages

27 November 2020

This study explored the pozzolanic reactivity of granite powder (GP) and its influence on the microstructure of cement paste. An analysis of the physical properties (water demand, setting time, heat of hydration and total shrinkage), compressive stre...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
1 Citations
409 Views
32 Pages

11 June 2026

The scarcity of natural aggregates and the accumulation of oil sludge in desert regions pose critical challenges for highway construction. Although aeolian sand and oil sludge pyrolysis residue have been studied individually as construction materials...

(This article belongs to the Special Issue Sustainable and Eco-Friendly Concrete: Innovations in Green Binders and Recycled Materials)
  • Article
  • Open Access
10 Citations
3,279 Views
18 Pages

8 September 2022

Physical salt attack (PSA) is one of the dominant durability issues of cement-based materials, where salt crystallization pressure is the driving force inducing damage. However, research on the temperature-related deterioration behavior of cement-bas...

(This article belongs to the Special Issue Durability and Sustainability of Cement and Concrete Composites)
  • Article
  • Open Access
7 Citations
2,918 Views
19 Pages

12 November 2020

The present paper focused on the investigation of the effectiveness of using various chemical admixtures and their effect on the strength and deformability of the reinforced spun concrete members—the supporting poles of the overhead power trans...

(This article belongs to the Special Issue Long-Term Behavior of Cementitious Materials and Reinforced Concrete Structures)
  • Extended Abstract
  • Open Access
1,809 Views
2 Pages

Physical Modification of PLA for Increasing Its Durability (Polarizing Light Microscopy Study)

  • Beatrice Girbaciu,
  • Mariana Cristea,
  • Daniela Ionita,
  • Silvia Mathe and
  • Doina Dimonie

The European Strategy for plastic materials in a circular economy underlines the importance of using renewable polymers for long-lasting applications. [...]

(This article belongs to the Proceedings of Priorities of Chemistry for a Sustainable Development-PRIOCHEM)
  • Article
  • Open Access
8 Citations
2,841 Views
27 Pages

8 March 2022

The results of ground granulated blast furnace slag (GGBS) tests in alkali-activated systems show that, with its use, it is possible to produce promising materials with the required properties. Unfortunately, GGBS is becoming a scarce commodity on th...

(This article belongs to the Collection Alkali‐Activated Materials for Sustainable Construction)
  • Review
  • Open Access
8 Citations
4,253 Views
37 Pages

Integrating Physical and Biochemical Cues for Muscle Engineering: Scaffolds and Graft Durability

  • Farbod Yousefi,
  • Lauren Ann Foster,
  • Omar A. Selim and
  • Chunfeng Zhao

Muscle stem cells (MuSCs) are essential for skeletal muscle regeneration, influenced by a complex interplay of mechanical, biochemical, and molecular cues. Properties of the extracellular matrix (ECM) such as stiffness and alignment guide stem cell f...

(This article belongs to the Section Regenerative Engineering)
  • Article
  • Open Access
51 Citations
3,875 Views
22 Pages

Physical, Mechanical and Durability Properties of Eco-Friendly Engineered Geopolymer Composites

  • Ahmed M. Tahwia,
  • Duaa S. Aldulaimi,
  • Mohamed Abdellatief and
  • Osama Youssf

Engineered geopolymer composite (EGC) is a high-performance material with enhanced mechanical and durability capabilities. Ground granulated blast furnace slag (GGBFS) and silica fume (SF) are common binder materials in producing EGC. However, due to...

(This article belongs to the Special Issue Innovative Solutions for Concrete Applications)
  • Review
  • Open Access
128 Citations
11,465 Views
31 Pages

23 October 2020

This paper presents a literature review concerning the characteristics of MgO (magnesium oxide or magnesia) and its application in cementitious materials. It starts with the characterization of MgO in terms of production processes, calcination temper...

(This article belongs to the Special Issue Novel and Sustainable Civil Engineering Materials: Eco-Design, Properties and New Processing)
  • Article
  • Open Access
12 Citations
4,645 Views
18 Pages

Impact of Polypropylene Fiber on the Mechanical and Physical Properties of Pervious Concrete: An Experimental Investigation

  • Jian Wu,
  • Liangjie Hu,
  • Chaoqun Hu,
  • Yuxi Wang and ,
  • Jian Zhou and
  • Xue Li
  • + 1 author+ 0 author

1 August 2023

It is important to balance the characteristics of pervious concrete, such as mechanical, physical, and durability properties. To obtain a better performance, adding fibers is very effective. In this study, samples with different polypropylene fiber c...

(This article belongs to the Special Issue Durability, Physical and Mechanical Properties of Ecofriendly Cement and Concrete Composites)
  • Article
  • Open Access
5 Citations
3,152 Views
17 Pages

Effect of Furfurylation on Bamboo-Scrimber Composites

  • Wanju Li,
  • Guijun Xie,
  • Hongxia Ma and
  • Xingwei Li

6 April 2023

Bamboo is a material with excellent development prospects. It is increasingly used in furniture, decoration, building, and bridge construction. In this study, Furfurylated bamboo bundles and phenol-formaldehyde resin were used to make bamboo-scrimber...

  • Article
  • Open Access
12 Citations
5,439 Views
15 Pages

Experimental and Modeling Studies of Bond Coat Species Effect on Microstructure Evolution in EB-PVD Thermal Barrier Coatings in Cyclic Thermal Environments

  • Zhe Lu,
  • Guanlin Lyu,
  • Abhilash Gulhane,
  • Hyeon-Myeong Park and ,
  • Jun Seong Kim,
  • Yeon-Gil Jung and
  • Jing Zhang
  • + 2 authors+ 0 author

28 September 2019

In this work, the effects of bond coat species on the thermal barrier coating (TBC) microstructure are investigated under thermal cyclic conditions. The TBC samples are prepared by electron beam-physical vapor deposition with two species of bond coat...

(This article belongs to the Special Issue Science and Technology of Thermal Barrier Coatings)
  • Review
  • Open Access
42 Citations
14,257 Views
29 Pages

6 March 2024

Nowadays, the sustainable development of the construction industry has become a focus of attention. Crushing and grinding waste seashells originating from the fishery industry, such as oyster shells, cockle shells, mussel shells, and scallop shells,...

  • Article
  • Open Access
6 Citations
3,149 Views
20 Pages

Mechanism of Strength Formation of Unfired Bricks Composed of Aeolian Sand–Loess Composite

  • Deren Liu,
  • Yafang Guo,
  • Yanjie Zhang,
  • Zhechao Zhu and ,
  • Pengju Xu,
  • Shize Zhang and
  • Yugang Ren
  • + 2 authors+ 0 author

4 March 2024

Aeolian sand and loess are both natural materials with poor engineering-related properties, and no research has been devoted to exploring aeolian sand–loess composite materials. In this study, we used aeolian sand and loess as the main raw mate...

(This article belongs to the Section Construction and Building Materials)

of 32