Skip to Content

4,078 Results Found

  • Article
  • Open Access
29 Citations
7,658 Views
28 Pages

Cooled Pads for Tilting-Pad Journal Bearings

  • Steven Chatterton,
  • Paolo Pennacchi,
  • Andrea Vania and
  • Phuoc Vinh Dang

17 October 2019

Tilting-pad journal bearings (TPJBs) are widely installed in rotating machines owing to their high stability, but some drawbacks can be noted, such as higher cost with respect to cylindrical journal bearings and thermal issues. High temperatures in t...

(This article belongs to the Special Issue Selected Papers from the 7th European Conference on Tribology (ECOTRIB2019))
  • Article
  • Open Access
11 Citations
5,564 Views
14 Pages

Investigation of PEEK Lined Pads for Tilting-Pad Journal Bearings

  • Steven Chatterton,
  • Edoardo Gheller,
  • Andrea Vania,
  • Paolo Pennacchi and
  • Phuoc Vinh Dang

10 February 2022

Tilting-pad journal bearings are widely used in industry to support rotating shafts due to their high dynamic performance. The operating limits of these bearings are mainly represented by the maximum permissible temperature of the lined materials of...

(This article belongs to the Special Issue Tilting Pad Journal Bearings: State of the Art)
  • Article
  • Open Access
1 Citations
2,059 Views
19 Pages

Assessment of Uneven Wear of Freight Wagon Brake Pads

  • Sergii Panchenko,
  • Juraj Gerlici,
  • Alyona Lovska and
  • Vasyl Ravlyuk

18 June 2025

This study deals with the problem of uneven wear of brake pads of wagons caused by a set of structural, dynamic, technological and operational factors. It has been found that an uneven distribution of the brake pad pressure force leads to higher main...

  • Article
  • Open Access
182 Views
18 Pages

29 October 2026

This study systematically investigated three types of low-metal friction pads with different molybdenum disulfide (MoS2) contents and analyzed their physicochemical properties and friction and wear performance. Test results show that the A2 specimen,...

(This article belongs to the Special Issue Research on Friction, Wear and Corrosion Properties of Materials (2nd Edition))
  • Proceeding Paper
  • Open Access
3,195 Views
4 Pages

Test Bench for Complete Characterization of Evaporative Cooling Pads

  • Ana Tejero-González,
  • Asmae Boubkari,
  • Mercedes Simón-Caicoya and
  • Eric A. Sánchez-Noriega

Nowadays, we can find many studies about evaporative cooling pads, but a uniform methodology does not exist for experimental tests, and many factors are less studied. Our goal is to design and build a versatile experimental facility that enables the...

(This article belongs to the Proceedings of Innovations-Sustainability-Modernity-Openness Conference (ISMO’22))
  • Article
  • Open Access
35 Citations
9,565 Views
13 Pages

Wearable Plasma Pads for Biomedical Applications

  • Junggil Kim,
  • Kyong-Hoon Choi,
  • Yunjung Kim,
  • Bong Joo Park and
  • Guangsup Cho

17 December 2017

A plasma pad that can be attached to human skin was developed for aesthetic and dermatological treatment. A polyimide film was used for the dielectric layer of the flexible pad, and high-voltage and ground electrodes were placed on the film surface....

(This article belongs to the Special Issue Smart Environment and Healthcare)
  • Article
  • Open Access
6 Citations
5,160 Views
15 Pages

Nonwoven/Nanomembrane Composite Functional Sweat Pads

  • Muhammad Bilal Qadir,
  • Mohammed Jalalah,
  • Muhammad Usman Shoukat,
  • Adnan Ahmad and ,
  • Zubair Khaliq,
  • Ahsan Nazir,
  • Muhammad Naveed Anjum,
  • Abdul Rahman,
  • Muhammad Qamar Khan and
  • Farid A. Harraz
  • + 10 authors+ 5 authors

5 December 2022

Sweat is a natural body excretion produced by skin glands, and the body cools itself by releasing salty sweat. Wetness in the underarms and feet for long durations causes itchiness and an unpleasant smell. Skin-friendly reusable sweat pads could be u...

(This article belongs to the Section Membrane Applications)
  • Article
  • Open Access
1,907 Views
14 Pages

16 May 2025

The structural design of pressure vessels is a rather complicated engineering task and demands on using finite element method (FEM) software to recreate many issues accompanying the design process. One of them is a choice of the shape of reinforcing...

(This article belongs to the Section Materials Simulation and Design)
  • Feature Paper
  • Article
  • Open Access
12 Citations
4,201 Views
21 Pages

Analysis of Asymmetric Wear of Brake Pads on Freight Wagons despite Full Contact between Pad Surface and Wheel

  • Sergii Panchenko,
  • Juraj Gerlici,
  • Alyona Lovska,
  • Vasyl Ravlyuk and ,
  • Ján Dižo and
  • Miroslav Blatnický
  • + 1 author+ 0 author

13 March 2024

This article presents the results of a study focused on identifying the main causes of the asymmetric (clinodual) wear of composite brake pads on freight wagons. A new scientific approach to determining the clinodual wear of composite brake pads on f...

(This article belongs to the Section F: Engineering and Materials)
  • Article
  • Open Access
24 Citations
4,992 Views
17 Pages

Investigation and Modelling of the Weight Wear of Friction Pads of a Railway Disc Brake

  • Wojciech Sawczuk,
  • Agnieszka Merkisz-Guranowska,
  • Dariusz Ulbrich,
  • Jakub Kowalczyk and
  • Armando-Miguel Rilo Cañás

12 September 2022

This paper presents the results of tests on the railway disc brake with regard to the weight wear of friction pads. The tests were carried out at a certified brake test bench where the friction-mechanical characteristics of the railway brake were det...

(This article belongs to the Special Issue Tribology: Friction and Wear of Engineering Materials (Second Volume))
  • Article
  • Open Access
4 Citations
1,980 Views
18 Pages

Comfort During Motion: Analyzing the Pressure Profile of Auxetic Bra Pads

  • Yin-ching Keung,
  • Kit-lun Yick,
  • Joanne Yip and
  • Annie Yu

7 November 2025

Auxetic structures, characterized by a negative Poisson’s ratio and unique form-fitting deformation, are adopted for designing a bra pad that would facilitate bras with a flexible and adaptive fit. This study compares the pressure distribution...

(This article belongs to the Special Issue Functional Textiles: Fabrication, Processing and Applications)
  • Article
  • Open Access
15 Citations
4,818 Views
14 Pages

21 October 2019

This paper presents the development and evaluation of fall-impact protection pants for elderly women using additive manufacturing. The protective pants were designed incorporating a protective pad in the hip area to reduce the impact of falls on the...

(This article belongs to the Special Issue Multifunctional Textile Materials)
  • Article
  • Open Access
8 Citations
2,041 Views
16 Pages

Influence of Aging Conditions on the Dynamic Stiffness of EPDM and EVA Rail Pads

  • Isaac Rivas,
  • Jose A. Sainz-Aja,
  • Diego Ferreño,
  • Isidro Carrascal and ,
  • Jose Casado and
  • Soraya Diego
  • + 1 author+ 0 author

16 April 2025

The railway sector plays a crucial role in sustainable transportation by reducing greenhouse gas emissions while supporting an increasing volume of freight and passenger transport. Rail pads, essential components in railway infrastructure, mitigate v...

(This article belongs to the Section Transportation and Future Mobility)
  • Article
  • Open Access
4 Citations
2,117 Views
20 Pages

Prediction of Residual Wear Resources of Composite Brake Pads of a Modernized Brake System of Freight Wagons

  • Sergii Panchenko,
  • Juraj Gerlici,
  • Alyona Lovska,
  • Vasyl Ravlyuk and
  • Ján Dižo

25 November 2024

This research highlights the results of a comprehensive study of the efficiency of modernized brake systems operation of freight wagons. The inspection of the modernized elements of the lever brake system of bogies and the measurement of the wear par...

(This article belongs to the Special Issue Vehicle Design Processes, 2nd Edition)
  • Review
  • Open Access
47 Citations
28,806 Views
17 Pages

11 November 2018

Disposable absorbent hygiene products have evolved for superior performance, enhancing the convenience of daily lives. However, the use of disposable hygiene pads has brought safety concerns on chemical exposure, and significant efforts have been mad...

(This article belongs to the Section Sustainable Engineering and Science)
  • Article
  • Open Access
1 Citations
3,250 Views
15 Pages

Development of Self-Help Lifting Pads for Elderly People with Difficulty in Sitting Up

  • Manatee Jitanan,
  • Kamphon Saeng-iam,
  • Ekathai Wirojsakunchai,
  • Kuanchai Kakaew and
  • Usanee Lalitpasan

24 October 2024

As individuals age, physiological changes can make it increasingly difficult to sit up unassisted. This study aimed to develop ergonomic self-help lifting pads to aid elderly individuals. The first phase involved constructing the pads and a needs ass...

  • Review
  • Open Access
6 Citations
3,930 Views
34 Pages

Materials and Structures Inspired by Human Heel Pads for Advanced Biomechanical Function

  • Zhiqiang Zhuang,
  • Congtian Gu,
  • Shunlin Li,
  • Hu Shen and ,
  • Ning Liu,
  • Ziwei Li,
  • Dakai Wang,
  • Cong Wang,
  • Linpeng Liu and
  • Guoliang Ma
  • + 7 authors+ 2 authors

The heel pad, located under the calcaneus of the human foot, is a hidden treasure that has been subjected to harsh mechanical conditions such as impact, vibration, and cyclic loading. This has resulted in a unique compartment structure and material c...

(This article belongs to the Special Issue Bioinspired Engineered Systems)
  • Review
  • Open Access
53 Citations
8,985 Views
15 Pages

Influence of Natural Fiber Content on the Frictional Material of Brake Pads—A Review

  • Zeina Ammar,
  • Hamdy Ibrahim,
  • Mahmoud Adly,
  • Ioannis Sarris and
  • Sherif Mehanny

9 February 2023

Research into the use of eco-friendly materials, such as natural fibers, in brake pads has gained momentum in the last few decades. This can be attributed to the potential of natural fibers to replace traditional materials in tribological application...

(This article belongs to the Special Issue Advanced Composite Materials from Natural and Synthetic Sources: Fabrication, Characterization and Practical Application)
  • Article
  • Open Access
7 Citations
7,095 Views
15 Pages

Sustainable Approach to Development of Antimicrobial Textile Pads for Sweat Absorption

  • Daiva Mikucioniene,
  • Jurga Andreja Kazlauskaite,
  • Inga Matulyte,
  • Brigita Petkuviene and ,
  • Ginta Laureckiene,
  • Mindaugas Marksa and
  • Jurga Bernatoniene
  • + 2 authors+ 0 author

23 February 2024

Double-layered textile sweat-absorbing underarm pads with a natural antimicrobial treatment can be used to solve the problem of the wetness sensation in the case of increased physical activity or hyperhidrosis. In addition, changeable antimicrobial a...

  • Review
  • Open Access
66 Citations
15,717 Views
22 Pages

Overview of the Important Factors Influencing the Performance of Eco-Friendly Brake Pads

  • Agustinus Purna Irawan,
  • Deni Fajar Fitriyana,
  • Cionita Tezara,
  • Januar Parlaungan Siregar and ,
  • Dwinita Laksmidewi,
  • Gregorius Dimas Baskara,
  • Mohd Zulkfly Abdullah,
  • Ramli Junid,
  • Agung Efriyo Hadi and
  • Najid Najid
  • + 6 authors+ 1 author

16 March 2022

The braking system is a crucial element in automotive safety. In order for the braking mechanism to function effectively, the brake pads’ durability as well as quality are crucial aspects to take into account. A brake pad is a part of a vehicle...

(This article belongs to the Special Issue High-Performance Biocomposite Reinforced by Natural Fibers)
  • Article
  • Open Access
8 Citations
6,861 Views
13 Pages

Improvement of Thrust Bearing Calculation Considering the Convectional Heating within the Space between the Pads

  • Monika Chmielowiec-Jablczyk,
  • Andreas Schubert,
  • Christian Kraft,
  • Hubert Schwarze and ,
  • Michal Wodtke and
  • Michal Wasilczuk
  • + 1 author+ 0 author

26 February 2018

A modern thrust bearing tool is used to estimate the behavior of tilting pad thrust bearings not only in the oil film between pad and rotating collar, but also in the space between the pads. The oil flow in the space significantly influences the oil...

(This article belongs to the Special Issue Friction and Lubrication of Sliding Bearings)
  • Article
  • Open Access
7 Citations
4,590 Views
17 Pages

Improving Energy Efficiency by Utilizing Wetted Cellulose Pads in Passive Cooling Systems

  • Ebrahim Morady,
  • Madjid Soltani,
  • Farshad Moradi Kashkooli,
  • Masoud Ziabasharhagh and ,
  • Armughan Al-Haq and
  • Jatin Nathwani
  • + 1 author+ 0 author

5 January 2022

The effectiveness of using wetted cellulose pads on improving the performance of two conventional passive cooling systems has been evaluated. First, an experimental design was developed to determine the impact of using a wetted cellulose pad on the t...

(This article belongs to the Section A3: Wind, Wave and Tidal Energy)
  • Article
  • Open Access
4 Citations
3,706 Views
21 Pages

Currently, there is a need to increase the density of interconnections on printed circuit boards (PCBs). Does this mean that the only option for quality PCB manufacturing is to proportionally increase precision of equipment, or is there another way?...

(This article belongs to the Special Issue Recent Advances and New Trends in Signal Processing)
  • Article
  • Open Access
9 Citations
4,535 Views
15 Pages

Electron Microscopic Characterization of the Brake Assembly Components (Disc and Pads) from Passenger Vehicles

  • Panayotis Dimopoulos Eggenschwiler,
  • Daniel Schreiber,
  • Viola Papetti,
  • Sebastian Gramstat and
  • Dmytro Lugovyy

25 March 2022

The present work focuses on a detailed analysis of new and used braking friction partners (discs and pads) in order to provide a comprehensive characterization of the source of the airborne particles formed during braking. Scanning electron microscop...

(This article belongs to the Special Issue Brake Wear Particulate Matter and Mitigation Strategies)
  • Article
  • Open Access
4 Citations
5,688 Views
9 Pages

Aerodynamic bearings with elastically supported tilting pads have operational properties comparable with widely-used foil journal bearings. They combine the excellent stability of tilting pad bearings, as a result of very small cross-coupling stiffne...

(This article belongs to the Special Issue Bearings in Turbomachinery)
  • Article
  • Open Access
14 Citations
3,947 Views
20 Pages

Fabrication and Characterization of Al2O3-Siloxane Composite Thermal Pads for Thermal Interface Materials

  • Seul-Ki Kim,
  • Yeong-Jin Koo,
  • Hyun Sik Kim,
  • Jong-Keun Lee and ,
  • Kyounghoon Jeong,
  • Younki Lee and
  • Eun Young Jung
  • + 2 authors+ 0 author

16 February 2024

In this study, Al2O3–siloxane composite thermal pads were fabricated using a tape–casting technique, and the thermal conductivity effect of the Al2O3 nanoparticle powder synthesized using a flame fusion process on siloxane composite therm...

(This article belongs to the Special Issue Polymer Surface Modification and Characterization)
  • Article
  • Open Access
21 Citations
4,926 Views
11 Pages

This study investigates the temperature reduction capacity and water consumption of a fan-pad system installed in a greenhouse located in the coastal regions of Almería. The suitability of this system for coastal zones with high environmental...

(This article belongs to the Special Issue Greenhouse and Horticulture)
  • Article
  • Open Access
12 Citations
7,098 Views
29 Pages

Comparative Analysis of the Cooling Efficiency in Tropical Climate of Three Alternative Materials for Evaporative Cooling Pads

  • Felipe Andrés Obando Vega,
  • Ana Paola Montoya Rios,
  • Jairo Alexander Osorio Saraz,
  • Flávio Alves Damasceno and
  • Matteo Barbari

22 December 2021

A comparison between commercial cellulose evaporative cooling pad and pads manufactured with three alternative materials was made for environmental conditions typical of tropical countries. Wind tunnel tests were carried out to compute the convective...

(This article belongs to the Section Agricultural Science and Technology)
  • Article
  • Open Access
69 Citations
10,111 Views
12 Pages

Copper Substitution and Noise Reduction in Brake Pads: Graphite Type Selection

  • Raffaele Gilardi,
  • Luigi Alzati,
  • Mamadou Thiam,
  • Jean-François Brunel and ,
  • Yannick Desplanques,
  • Philippe Dufrénoy,
  • Sanjeev Sharma and
  • Jayashree Bijwe
  • + 3 authors+ 0 author

9 November 2012

Graphite is commonly used in brake pads. The use of graphite powder has the main goal of solid state lubrication and friction coefficient stabilization. In this article results on resin bonded brake pads with focus on noise performance and heat dissi...

  • Article
  • Open Access
27 Citations
9,478 Views
8 Pages

22 March 2016

This study focuses on the development of a novel polishing pad for SiC wafers. Fe and Al2O3 particles were impregnated in a polyurethane matrix, thus forming a fixed abrasive polishing pad. Four types of pads with different compositions of Fe and Al2...

(This article belongs to the Special Issue Selected Papers from the 2015 International Conference on Inventions)
  • Article
  • Open Access
3 Citations
5,737 Views
9 Pages

Thermal Performance of Silicone and Non-Silicone Thermal Pads as Thermal Interface Materials

  • Chandan Roy,
  • Landon Yarbrough,
  • Hammad Quddus and
  • Megan Batchelor

The research presents the thermal performance comparison of silicone and non-silicone thermal pads using a steady-state thermal interface material (TIM) testing apparatus. The TIM tester follows standard guidelines for testing thermal properties. TIM...

  • Article
  • Open Access
11 Citations
3,278 Views
22 Pages

Design of Sensorized Rail Pads for Real-Time Monitoring and Predictive Maintenance of Railway Infrastructure

  • Amparo Guillén,
  • Oswaldo Guerrero-Bustamante,
  • Guillermo R. Iglesias,
  • Fernando Moreno-Navarro and
  • Miguel Sol-Sánchez

Embedding sensors in rail pads allows for direct monitoring of train–track interaction, which is essential for preventive maintenance and sustainable management of railway infrastructure. Nonetheless, given the critical role that rail pads play...

  • Article
  • Open Access
60 Citations
16,947 Views
13 Pages

Effects of Different Sulfur Dioxide Pads on Botrytis Mold in ‘Italia’ Table Grapes under Cold Storage

  • Saeed Ahmed,
  • Sergio Ruffo Roberto,
  • Allan Ricardo Domingues,
  • Muhammad Shahab and ,
  • Osmar José Chaves Junior,
  • Ciro Hideki Sumida and
  • Reginaldo Teodoro De Souza
  • + 2 authors+ 0 author

‘Italia’ grape is one of the most important table grape cultivars grown worldwide. Gray mold, caused by Botrytis cinerea Pers. Fr., is one of the most important causes of postharvest decay of table grapes, and the control of this disease...

(This article belongs to the Special Issue Horticultural Plant Pathology and Prevention)
  • Article
  • Open Access
9 Citations
5,315 Views
18 Pages

Colorimetric Paper-Based Analytical Devices (PADs) Backed by Chemometrics for Pd(II) Detection

  • Giancarla Alberti,
  • Lisa Rita Magnaghi,
  • Marzia Iurato,
  • Camilla Zanoni and
  • Raffaela Biesuz

25 August 2023

This paper presents the development of cheap and selective Paper-based Analytical Devices (PADs) for selective Pd(II) determination from very acidic aqueous solutions. The PADs were obtained by impregnating two cm-side squares of filter paper with an...

(This article belongs to the Special Issue Colorimetric Sensors: Methods and Applications)
  • Article
  • Open Access
19 Citations
4,688 Views
15 Pages

Wear Behavior of Commercial Copper-Based Aircraft Brake Pads Fabricated under Different SPS Conditions

  • Kyung Il Kim,
  • Hyunjong Lee,
  • Jongbeom Kim,
  • Kyu Hwan Oh and
  • Kyung Taek Kim

26 October 2021

Understanding the wear behavior of Cu-based brake pads, which are used in high-speed railway trains and aircraft, is essential for improving their design and safety. Therefore, the wear mechanism of these pads has been studied extensively. However, m...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Feature Paper
  • Article
  • Open Access
12 Citations
4,149 Views
16 Pages

Role of Promaxon-D in Controlling Tribological Performance of Cu-Free Brake Pads

  • Bhaskaranand Bhatt,
  • Navnath Kalel,
  • Ashish Darpe and
  • Jayashree Bijwe

7 March 2021

Copper appears to be an indispensable ingredient of non-asbestos organic (NAO) brake friction materials owing to its multifunctionality. However, recent findings proved it as a threat to aquatic life and efforts were initiated worldwide over the last...

(This article belongs to the Special Issue New Developments in Friction Brake Materials)
  • Article
  • Open Access
1 Citations
479 Views
19 Pages

9 July 2026

The resilience pads of sleeper floating tracks (STEDEF) are key components that absorb shock loads and vibrations induced by train traffic. Currently, under the Korean domestic guidelines for track facility performance evaluation, one sample per 500...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
7 Citations
2,508 Views
14 Pages

Metal 3D-Printed Bioinspired Lattice Elevator Braking Pads for Enhanced Dynamic Friction Performance

  • Nikolaos Kladovasilakis,
  • Eleftheria Maria Pechlivani,
  • Ioanna K. Sfampa,
  • Konstantinos Tsongas and ,
  • Apostolos Korlos,
  • Constantine David and
  • Dimitrios Tzovaras
  • + 2 authors+ 0 author

5 June 2024

The elevator industry is constantly expanding creating an increased demand for the integration of high technological tools to increase elevator efficiency and safety. Towards this direction, Additive Manufacturing (AM), and especially metal AM, is on...

(This article belongs to the Special Issue Metal Additive Manufacturing: Design, Performance, and Applications)
  • Article
  • Open Access
3 Citations
2,952 Views
10 Pages

27 April 2021

This paper reports the results of a study concerned with use of electroadhesion for investigation of the attraction force of paper (weight of 50 g/m2). For this purpose, a measuring system was developed and built. Next, a dedicated electroadhesive pa...

(This article belongs to the Section F: Electrical Engineering)
  • Article
  • Open Access
2 Citations
2,469 Views
24 Pages

21 March 2023

To date, the spring stiffness of resilience pads was mostly evaluated based on conventional (site measurement and laboratory tests) methods. Most studies in the past analyzed the effects of the deterioration of resilience pads on track damage. To exa...

  • Article
  • Open Access
1 Citations
2,657 Views
11 Pages

Research on Brownian Thermal Noise Limit of a Cylindrical Ultra-Stable Cavity with Support Pads

  • Dongdong Jiao,
  • Guanjun Xu,
  • Linbo Zhang,
  • Jing Gao and ,
  • Yang Li,
  • Ruifang Dong,
  • Tao Liu and
  • Shougang Zhang
  • + 3 authors+ 0 author

21 November 2022

Brownian thermal noise (TN) of ultra-stable cavities (USCs) imposes a fundamental limitation on the frequency stability of ultra-narrow linewidth lasers. This work investigates the TN in cylindrical USCs with the four support pads in detail through t...

(This article belongs to the Section Inorganic Crystalline Materials)
  • Article
  • Open Access
14 Citations
3,437 Views
21 Pages

12 February 2023

The rail pad is the elastic element between the rail and the sleeper that has the role of absorbing the mechanical stresses from the rail and reducing the vibrations and shocks generated by wheel–rail interactions. In this paper, the problem of...

(This article belongs to the Special Issue Research and Modeling of Materials Fatigue and Fracture)
  • Article
  • Open Access
6 Citations
3,704 Views
13 Pages

29 September 2021

Restoring anthropogenic footprints to pre-disturbance conditions or minimizing their long-term impacts is an important goal in conservation. Many footprints, particularly if left alone, have wide-ranging effects on biodiversity. In Canada, energy exp...

(This article belongs to the Special Issue Modelling and Managing the Dynamics of Pine Forests)
  • Article
  • Open Access
4 Citations
3,468 Views
21 Pages

Robust Wireless Power Transfer for EVs by Self-Oscillating Controlled Inverters and Identical Single-Coil Transmitting and Receiving Pads

  • Alireza Eikani,
  • Mohammad Amirkhani,
  • Ehsan Farmahini Farahani,
  • Volker Pickert and ,
  • Mojtaba Mirsalim and
  • Sadegh Vaez-Zadeh
  • + 1 author+ 0 author

6 January 2025

Inductive wireless power transfer (IWPT) with stable output power and high efficiency is a major challenge for charging electric vehicles (EVs). This paper, for the first time, develops a robust IWPT system using a circular pad (CP) and double-D pad...

(This article belongs to the Special Issue Recent Advances in Power Electronics and Wireless Power Transfer Systems)
  • Article
  • Open Access
30 Citations
4,934 Views
14 Pages

A Novel Approach to the Analysis of Under Sleeper Pads (USP) Applied in the Ballasted Track Structures

  • Artur Zbiciak,
  • Cezary Kraśkiewicz,
  • Anna Al Sabouni-Zawadzka,
  • Jan Pełczyński and
  • Sławomir Dudziak

26 May 2020

The present paper is dedicated to the analysis of under sleeper pads (USP), which are resilient elements used in ballasted track systems as vibration isolators. Four types of USP are considered. The authors present the results of laboratory tests, wh...

(This article belongs to the Special Issue Experimental Characterization and Numerical Modelling of Damping Capacity for Classical and Innovative Materials)
  • Article
  • Open Access
18 Citations
4,750 Views
17 Pages

Preparation and Properties of Sustainable Brake Pads with Recycled End-of-Life Tire Rubber Particles

  • Aitana Tamayo,
  • Fausto Rubio,
  • Roberto Pérez-Aparicio,
  • Leticia Saiz-Rodríguez and
  • Juan Rubio

30 September 2021

Sustainable composite brake pads were processed by employing recycled end-of-life tire (ELT) rubber particles obtained by means of cryogenic grinding and ambient grinding. The effect of the grinding mechanism and concentration of ELT rubber particles...

(This article belongs to the Special Issue Advanced Rubber Composite)
  • Article
  • Open Access
3 Citations
1,228 Views
19 Pages

Efficient Prediction and Enhancement in Friction Wear Performance of Synthetic Brake Pads Using Machine Learning

  • Hongzhe Xin,
  • Wangyi Shen,
  • Ling Feng,
  • Yushan Wu and ,
  • Huan Wang,
  • Faxiang Qin,
  • Hua-Xin Peng and
  • Peng Xu
  • + 3 authors+ 0 author

To tackle traditional synthetic brake pads’ friction instability and performance degradation at high speeds, as well as the costly and time-consuming empirical formula optimization, a multi-stage synergistic optimization (MSSO) framework driven...

(This article belongs to the Section Composites Modelling and Characterization)
  • Article
  • Open Access
7 Citations
3,793 Views
13 Pages

27 January 2020

When the surface of gray cast iron is subjected to laser irradiation and melted and then re-solidified, a material can be obtained that has a superior structure and properties to the base metal. On the surface of gray iron brake drums, the surface of...

  • Article
  • Open Access
15 Citations
6,806 Views
32 Pages

21 July 2022

The purpose of a road vehicle’s friction brakes is to convert a vehicle’s kinetic energy to thermal energy. When doing so, the brakes should not be heated to such temperatures at which their efficiency could be reduced. The objective of the measureme...

  • Article
  • Open Access
28 Citations
5,917 Views
12 Pages

Fabrication of Al2O3/ZnO and Al2O3/Cu Reinforced Silicone Rubber Composite Pads for Thermal Interface Materials

  • Seokkyu Jang,
  • Eun Ji Choi,
  • Han Jin Cheon,
  • Won Il Choi and ,
  • Woon Seo Shin and
  • Jong-Min Lim
  • + 1 author+ 0 author

24 September 2021

Thermal interface materials (also known as thermal pads) are widely used as a crucial part to dissipate heat generated in miniaturized and integrated electronic components. Here, we systematically investigated the effects of small ceramic and metalli...

(This article belongs to the Special Issue Advanced Rubber Composite)

of 82