Skip to Content
You are currently on the new version of our website. Access the old version .

136 Results Found

  • Feature Paper
  • Article
  • Open Access
10 Citations
3,911 Views
14 Pages

4 February 2020

Multi-component liquid-fluidized beds are encountered in a variety of industrial processes. Often, segregation severely affects the performance of the process unit. Unfortunately, size-driven and density-driven separation processes may occur with a c...

(This article belongs to the Special Issue Recent Advances in Fluidized Bed Hydrodynamics and Transport Phenomena)
  • Article
  • Open Access
732 Views
25 Pages

Experimental Evaluation of Two- and Four-Bed PSA Cycles for Hydrogen Recovery from Syngas and Water–Gas Shift Syngas

  • Aleksander Krótki,
  • Tomasz Spietz,
  • Joanna Bigda,
  • Agata Czardybon and
  • Karina Ignasiak

8 June 2026

This study experimentally evaluates hydrogen recovery from synthetic syngas and water–gas shift (WGS) syngas using a laboratory-scale pressure swing adsorption (PSA) unit equipped with layered activated carbon/zeolite 5A beds. Breakthrough test...

(This article belongs to the Special Issue Advances in Hydrogen Energy and Fuel Cell Technologies)
  • Article
  • Open Access
1 Citations
1,959 Views
27 Pages

Multicomponent Adsorption of Paracetamol and Metronidazole by Batch and Fixed-Bed Column Processes: Application of Monte Carlo Bayesian Modeling

  • Letícia Reggiane de Carvalho Costa,
  • Júlia Toffoli de Oliveira,
  • Fayola Silva Silveira and
  • Liliana Amaral Féris

29 June 2025

This study addresses the growing concern of water contamination by pharmaceutical residues, focusing on the simultaneous removal of paracetamol (PAR) and metronidazole (MTZ). Batch and fixed-bed column adsorption processes were evaluated using activa...

(This article belongs to the Section Environmental Sciences)
  • Article
  • Open Access
19 Citations
3,454 Views
11 Pages

11 October 2020

A cobalt-free equiatomic CrFeNiMn multicomponent alloy was fabricated from gas-atomized powder using laser powder bed fusion (L-PBF), also known as selective laser melting (SLM). The as-built specimens had a single face-centered cubic (FCC) structure...

  • Article
  • Open Access
12 Citations
3,160 Views
13 Pages

Corrosion Resistance of 316L/CuSn10 Multi-Material Manufactured by Powder Bed Fusion

  • Robert Kremer,
  • Johannes Etzkorn,
  • Heinz Palkowski and
  • Farzad Foadian

24 November 2022

Research and industry are calling for additively manufactured multi-materials, as these are expected to create more efficient components, but there is a lack of information on corrosion resistance, especially since there is a risk of bimetallic corro...

(This article belongs to the Special Issue Corrosion in Additive Manufacturing)
  • Review
  • Open Access
11 Citations
1,750 Views
30 Pages

8 December 2025

Heat exchangers–adsorbers (HEX-As) are emerging as innovative technologies in many applications (CO2 capture, gas purification and separation, thermal energy storage, etc). This review addresses the theoretical challenges within computational f...

(This article belongs to the Special Issue Fluid Dynamics Challenges in Energy Systems: High-Efficiency Design and Control)
  • Article
  • Open Access
2,787 Views
14 Pages

8 April 2022

With emission control regulations getting stricter, multi-functional catalyst systems are increasingly important for low-temperature operation. We investigate a wide range of multi-component catalyst systems, as physical mixtures and in multi-bed con...

(This article belongs to the Section Environmental Catalysis)
  • Article
  • Open Access
24 Citations
5,703 Views
25 Pages

5 April 2022

Over the years, a large number of sorption experiments using the aminopolycarboxylic acid (APCA)-functionalized adsorbents were carried out in batch conditions, but prospective research should also be directed towards column studies to check their in...

(This article belongs to the Collection Feature Papers in Gel Materials)
  • Article
  • Open Access
12 Citations
4,732 Views
12 Pages

Continuous Flow Photocatalytic Hydrogen Production from Water Synergistically Activated by TiO2, Gold Nanoparticles, and Carbon Nanotubes

  • Joseph Farah,
  • Florent Malloggi,
  • Frédéric Miserque,
  • Jongwook Kim and ,
  • Edmond Gravel and
  • Eric Doris
  • + 1 author+ 0 author

27 March 2023

Titanium dioxide nanoparticles were combined with carbon nanotubes and gold to develop improved photocatalysts for the production of hydrogen from water. The entangled nature of the nanotubes allowed for the integration of the photoactive hybrid cata...

(This article belongs to the Section Energy and Catalysis)
  • Article
  • Open Access
17 Citations
6,601 Views
20 Pages

Effects of Two Randomized and Controlled Multi-Component Interventions Focusing On 24-Hour Movement Behavior among Office Workers: A Compositional Data Analysis

  • Lisa-Marie Larisch,
  • Emil Bojsen-Møller,
  • Carla F. J. Nooijen,
  • Victoria Blom and ,
  • Maria Ekblom,
  • Örjan Ekblom,
  • Daniel Arvidsson,
  • Jonatan Fridolfsson,
  • David M. Hallman and
  • Lena V. Kallings
  • + 7 authors+ 2 authors

Intervention studies aiming at changing movement behavior have usually not accounted for the compositional nature of time-use data. Compositional data analysis (CoDA) has been suggested as a useful strategy for analyzing such data. The aim of this st...

(This article belongs to the Special Issue Physical Activity and Occupational Health in a 24/7 Perspective)
  • Article
  • Open Access
5 Citations
7,354 Views
20 Pages

Hydrogen Purification Performance of Pressure Swing Adsorption in Coal-Derived Activated Carbon/Zeolite 13X Layered Bed

  • Tianqi Yang,
  • Ziyu Yang,
  • Chenglong Li,
  • Liang Tong and ,
  • Ben Chen,
  • Xuefang Li,
  • Yupeng Yuan,
  • Chengqing Yuan and
  • Jinsheng Xiao
  • + 4 authors+ 0 author

14 May 2025

The large-scale production of high-purity hydrogen via pressure swing adsorption (PSA) remains a prominent research focus. This study develops a multi-component heat and mass transfer model for a lean hydrogen mixture (N2/CO2/H2/CO = 44.6/35.4/19.9/0...

(This article belongs to the Special Issue Production, Storage and Utilization of Hydrogen Energy)
  • Article
  • Open Access
7 Citations
2,367 Views
12 Pages

12 December 2022

A fully transient discrete-source 3D Additive Manufacturing (AM) process model was coupled with a 3D stochastic solidification structure model to simulate the grain structure evolution quickly and efficiently in metallic alloys processed through Elec...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
28 Citations
13,140 Views
23 Pages

INBED: A Highly Specialized System for Bed-Exit-Detection and Fall Prevention on a Geriatric Ward

  • Nico Jähne-Raden,
  • Ulf Kulau,
  • Michael Marschollek and
  • Klaus-Hendrik Wolf

27 February 2019

Objective: In geriatric institutions, the risk of falling of patients is very high and frequently leads to fractures of the femoral neck, which can result in serious consequences and medical costs. With regard to the current numbers of elderly people...

(This article belongs to the Special Issue Portable Biosensing Systems for Point-of-Care Diagnostic Applications)
  • Review
  • Open Access
20 Citations
9,852 Views
20 Pages

8 February 2023

Simulated moving bed (SMB) chromatography is a highly efficient adsorption-based separation technology with various industrial applications. At present, its application has been successfully extended to the biochemical and pharmaceutical industrial s...

(This article belongs to the Special Issue Industrial Chemistry Reaction: Kinetics, Mass Transfer and Industrial Reactor Design (II))
  • Article
  • Open Access
9 Citations
3,702 Views
14 Pages

Experimental and Numerical Investigations of In Situ Alloying during Powder Bed Fusion of Metals Using a Laser Beam

  • Andreas Wimmer,
  • Baturay Yalvac,
  • Christopher Zoeller,
  • Fabian Hofstaetter and ,
  • Stefan Adami,
  • Nikolaus A. Adams and
  • Michael F. Zaeh
  • + 2 authors+ 0 author

16 November 2021

Powder Bed Fusion of Metals using a Laser Beam (PBF-LB/M) is increasingly utilized for the fabrication of complex parts in various industrial sectors. Enabling a robust and reproducible manufacturing process is one of the main goals in view of the fu...

(This article belongs to the Special Issue Advances in Additive Manufacturing of Metals)
  • Article
  • Open Access
5 Citations
4,930 Views
10 Pages

30 July 2020

Photocatalysts for water purification typically lack efficiency for practical applications. Here we present a multi-component (Pt:SiO2:TiO2(P25)) material that was designed using knowledge of reaction mechanisms of mono-modified catalysts (SiO2:TiO2,...

(This article belongs to the Special Issue 10th Anniversary of Nanomaterials—Recent Advances in Nanomaterials for Energy and Catalysis)
  • Article
  • Open Access
42 Citations
6,650 Views
12 Pages

Mechanical Characterization of AISI 316L Samples Printed Using Material Extrusion

  • Mattia Carminati,
  • Mariangela Quarto,
  • Gianluca D’Urso,
  • Claudio Giardini and
  • Giancarlo Maccarini

28 January 2022

The main additive manufacturing (AM) methods to produce metal components are laser powder bed fusion and directed energy deposition, which are energy-intensive, time-consuming, and require high investment costs. An economical alternative is based on...

(This article belongs to the Topic Additive Manufacturing)
  • Article
  • Open Access
7 Citations
2,903 Views
17 Pages

Adsorption of Heavy Metals on Alkali-Activated Zeolite Foams

  • Eliška Svobodová,
  • Zdeněk Tišler,
  • Kateřina Peroutková,
  • Kateřina Strejcová and ,
  • Jan Abrham and
  • Josef Šimek
  • + 1 author+ 0 author

31 January 2024

Elevated concentrations of heavy metals in natural waters can cause significant ecological problems. It is therefore essential to ensure their removal from any water discharged into the environment immediately, especially in case of an accident, wher...

(This article belongs to the Special Issue Environmentally Friendly Adsorption Materials)
  • Article
  • Open Access
14 Citations
4,310 Views
13 Pages

Factors Associated with Bed-Blocking at a University Hospital (Cantabria, Spain) between 2007 and 2015: A Retrospective Observational Study

  • Amada Pellico-López,
  • David Cantarero,
  • Ana Fernández-Feito,
  • Paula Parás-Bravo and ,
  • Joaquín Cayón de las Cuevas and
  • María Paz-Zulueta
  • + 1 author+ 0 author

Current studies on bed-blocking or delayed discharge for non-medical reasons report important variations depending on the country or setting under study. Research on this subject is clearly important as the current system reveals major inefficiencies...

(This article belongs to the Special Issue Value Based Health and Social Care for Older People)
  • Review
  • Open Access
50 Citations
12,170 Views
24 Pages

20 January 2022

The article discusses the modern achievements in the field of thermal recovery of industrial and municipal waste. The average accumulation rate and calorific value of typical wastes were analyzed. The focus is on the opportunities to exploit the ener...

(This article belongs to the Special Issue Application of Municipal/Industrial Solid and Liquid Waste in Energy Area)
  • Article
  • Open Access
2 Citations
2,392 Views
21 Pages

Adsorption Column Performance Analysis for Volatile Organic Compound (VOC) Emissions Abatement in the Pharma Industry

  • Vasiliki E. Tzanakopoulou,
  • Michael Pollitt,
  • Daniel Castro-Rodriguez and
  • Dimitrios I. Gerogiorgis

6 June 2025

Volatile Organic Compounds (VOCs) are essential for primary pharmaceutical manufacturing. Their permissible emission levels are strictly regulated due to their toxic effects both on human health and the environment. Activated carbon adsorption column...

(This article belongs to the Special Issue Clean and Efficient Technology in Energy and the Environment)
  • Review
  • Open Access
19 Citations
3,194 Views
54 Pages

A Review on Advances in the Use of Raw and Modified Agricultural Lignocellulosic Residues in Mono- and Multicomponent Continuous Adsorption of Inorganic Pollutants for Upscaling Technologies

  • Ricardo Silva Coelho,
  • Liliane Catone Soares,
  • Oscar Fernando Herrera Adarme,
  • Luisa Cardoso Maia and ,
  • Camila Stéfanne Dias Costa,
  • Eric Guibal and
  • Leandro Vinícius Alves Gurgel
  • + 2 authors+ 0 author

31 March 2025

Using raw and modified lignocellulosic residues as bioadsorbents in continuous adsorption is challenging but it marks significant progress in water treatment and the transition to a bio-based circular economy. This study reviews the application of bi...

(This article belongs to the Section Polymer Applications)
  • Feature Paper
  • Article
  • Open Access
6 Citations
2,967 Views
21 Pages

Optimization of the Production of 1,1-Diethoxybutane by Simulated Moving Bed Reactor

  • Jasper Spitters,
  • Jonathan C. Gonçalves,
  • Rui P. V. Faria and
  • Alírio E. Rodrigues

20 January 2021

Simulated moving bed technology is applied in the field of pharmaceutical, petrochemical and fine chemistry. It shows capability in separating multicomponent mixtures up to high purities. In this work, an attempt was made to optimize the production o...

(This article belongs to the Special Issue Industrial Chemistry Reactions: Kinetics, Mass Transfer and Industrial Reactor Design)
  • Article
  • Open Access
18 Citations
2,989 Views
16 Pages

12 January 2024

This work presents the results of research conducted with an aim to improve the surface quality, hardness and wear resistance of titanium alloy Ti6Al4V, obtained via the laser powder bed fusion of metals (PBF-LB/M) process of additive manufacturing (...

(This article belongs to the Special Issue Advances in Metal Coatings for Wear and Corrosion Applications)
  • Article
  • Open Access
1 Citations
1,048 Views
17 Pages

Study on Synthesis and Performance of a Hybrid Crosslinked Composite Gel for High-Temperature Lost Circulation Control

  • Jiangang Shi,
  • Xuyang Yao,
  • Chaofei Wang,
  • Tao Ren and ,
  • Kecheng Liu,
  • Huijun Hao,
  • Zhangkun Ren and
  • Jingbin Yang
  • + 3 authors+ 0 author

11 April 2026

Conventional chemical gel plugging materials often suffer from poor high-temperature stability and inadequate mechanical properties. To address these issues, this study developed a high-performance composite gel material using a multi-component hybri...

(This article belongs to the Topic Polymer Gels for Oil Drilling and Enhanced Recovery)
  • Article
  • Open Access
17 Citations
4,222 Views
15 Pages

Numerical Simulation of the Solid Particle Sedimentation and Bed Formation Behaviors Using a Hybrid Method

  • Md Abdur Rob Sheikh,
  • Xiaoxing Liu,
  • Tatsuya Matsumoto,
  • Koji Morita and ,
  • Liancheng Guo,
  • Tohru Suzuki and
  • Kenji Kamiyama
  • + 2 authors+ 0 author

24 September 2020

In the safety analysis of sodium-cooled fast reactors, numerical simulations of various thermal-hydraulic phenomena with multicomponent and multiphase flows in core disruptive accidents (CDAs) are regarded as particularly difficult. In the material r...

(This article belongs to the Special Issue Engineering Fluid Dynamics 2019-2020)
  • Article
  • Open Access
7 Citations
2,173 Views
17 Pages

Investigation into Enhancing Methane Recovery and Sequestration Mechanism in Deep Coal Seams by CO2 Injection

  • Xiongwei Sun,
  • Hongya Wang,
  • Bin Gong,
  • Heng Zhao and ,
  • Haoqiang Wu,
  • Nan Wu,
  • Wei Sun,
  • Shizhao Zhang and
  • Ke Jiang
  • + 4 authors+ 0 author

13 November 2024

Injecting CO2 into coal seams to enhance coal bed methane (ECBM) recovery has been identified as a viable method for increasing methane extraction. This process also has significant potential for sequestering large volumes of CO2, thereby reducing th...

(This article belongs to the Special Issue CO2 Capture, Utilization and Storage)
  • Review
  • Open Access
39 Citations
9,545 Views
16 Pages

Bed Bugs: The Australian Response

  • Stephen L. Doggett,
  • Christopher J. Orton,
  • David G. Lilly and
  • Richard C. Russell

15 April 2011

Australia has experienced a sudden and unexpected resurgence in bed bug infestations from both Cimex lectularius L. and Cimex hemipterus F. A survey in 2006 revealed that infestations had increased across the nation by an average of 4,500% since the...

(This article belongs to the Special Issue Bed Bugs: An Emerging Pandemic)
  • Article
  • Open Access
1 Citations
1,041 Views
22 Pages

Multi-laser powder bed fusion is an emerging additive manufacturing technology that enables the production of high-performance components with intricate geometries and large aspect ratios. These tall, slender structures are highly susceptible to stee...

(This article belongs to the Special Issue Featured Papers for Journal of Experimental and Theoretical Analyses (JETA))
  • Article
  • Open Access
14 Citations
6,465 Views
6 Pages

Hybrid Binder to Mitigate Feed Powder Segregation in the Inkjet 3D Printing of Titanium Metal Parts

  • Saeed Maleksaeedi,
  • Ganesh Kumar Meenashisundaram,
  • Shenglu Lu,
  • Mojtaba Salehi and
  • Wei Jun

7 May 2018

Using feedstock containing discrete dual or multi powders leads to segregation in the powder bed of additive manufacturing processes. In the present study, a new impregnated hybrid binder with properties closer to those of the base powder is develope...

  • Article
  • Open Access
3 Citations
2,692 Views
23 Pages

Creating complex structures using multiple materials in additive manufacturing comes with a unique set of challenges, particularly when it comes to how the materials transition and bond together. This research looks at a new powder binning method for...

(This article belongs to the Special Issue Design, Processes and Materials for Additive Manufacturing: 2nd Edition)
  • Article
  • Open Access
44 Views
19 Pages

Numerical Simulation of Hydro-Sedimentary Dynamics and Tidal Prism Responses to Reclamation Removal in Northern Liaodong Bay

  • Kun Wang,
  • Chaokui Hu,
  • Jinhao Wu,
  • Zhaohui Wang and ,
  • Guangjun Song,
  • Yanjun Gong,
  • Nan Li and
  • Lun Song
  • + 3 authors+ 0 author

7 November 2026

Coastal reclamation projects have drastically altered hydrodynamic conditions, sediment transport, and tidal exchange in semi-enclosed bays. However, quantitative research on the ecological restoration effects achieved through reclamation removal rem...

(This article belongs to the Special Issue Fluid Mechanics in Ocean Engineering: Modeling and Simulation)
  • Article
  • Open Access
68 Citations
11,432 Views
21 Pages

Efficacy of a Multi-component m-Health Weight-loss Intervention in Overweight and Obese Adults: A Randomised Controlled Trial

  • Mitch J. Duncan,
  • Sasha Fenton,
  • Wendy J. Brown,
  • Clare E. Collins and ,
  • Nicholas Glozier,
  • Gregory S. Kolt,
  • Elizabeth G. Holliday,
  • Philip J. Morgan,
  • Beatrice Murawski and
  • Tracy L. Burrows
  • + 9 authors+ 4 authors

Background: This study compared the efficacy of two multi-component m-health interventions with a wait-list control group on body weight (primary outcome), and secondary outcomes of cardiovascular risk factors, lifestyle behaviours, and mental health...

(This article belongs to the Special Issue Assessing, Evaluating and Changing Health Behaviours Using IT-based Tools (e- & mHeath))
  • Article
  • Open Access
853 Views
49 Pages

From LQ to AI-BED-Fx: A Unified Multi-Fraction Radiobiological and Machine-Learning Framework for Gamma Knife Radiosurgery Across Intracranial Pathologies

  • Răzvan Buga,
  • Călin Gheorghe Buzea,
  • Valentin Nedeff,
  • Florin Nedeff and ,
  • Diana Mirilă,
  • Maricel Agop,
  • Letiția Doina Duceac and
  • Lucian Eva
  • + 3 authors+ 0 author

18 March 2026

Background: Gamma Knife radiosurgery (GKS) delivers highly conformal intracranial irradiation, yet clinical decision-making still relies predominantly on physical dose metrics that do not account for fractionation, dose rate, treatment time, or DNA r...

(This article belongs to the Special Issue Novel Insights into Glioblastoma and Brain Metastases (2nd Edition))
  • Article
  • Open Access
30 Citations
5,153 Views
17 Pages

Simultaneous Adsorption of Malachite Green and Methylene Blue Dyes in a Fixed-Bed Column Using Poly(Acrylonitrile-Co-Acrylic Acid) Modified with Thiourea

  • Abel Adekanmi Adeyi,
  • Siti Nurul Ain Md Jamil,
  • Luqman Chuah Abdullah,
  • Thomas Shean Yaw Choong and ,
  • Kia Li Lau and
  • Nor Halaliza Alias
  • + 1 author+ 0 author

Proper remediation of aquatic environments contaminated by toxic organic dyes has become a research focus globally for environmental and chemical engineers. This study evaluates the adsorption potential of a polymer-based adsorbent, thiourea-modified...

(This article belongs to the Section Materials Chemistry)
  • Article
  • Open Access
10 Citations
3,887 Views
14 Pages

Hydrogen Effects in Equiatomic CrFeNiMn Alloy Fabricated by Laser Powder Bed Fusion

  • Xuan Yang,
  • Yuriy Yagodzinskyy,
  • Yanling Ge,
  • Eryang Lu and ,
  • Joonas Lehtonen,
  • Lauri Kollo and
  • Simo-Pekka Hannula
  • + 2 authors+ 0 author

27 May 2021

This study investigates the effects of laser powder bed fusion (LPBF) on the hydrogen uptake of the face-centered cubic (FCC) equiatomic CrFeNiMn multicomponent alloy after cathodic hydrogen charging (HC). Hydrogen desorption was evaluated using ther...

  • Article
  • Open Access
9 Citations
3,470 Views
8 Pages

10 December 2021

Recently, a few computational methodologies and algorithms have been developed to simulate the microstructure evolution in powder bed fusion (PBF) additive manufacturing (AM) processes. However, none of these have attempted to simulate the grain stru...

(This article belongs to the Special Issue Numerical Simulation of Solidification Processes)
  • Case Report
  • Open Access
43 Citations
6,803 Views
12 Pages

25 December 2021

Additive Manufacturing (AM) allows the manufacturing of functionally graded materials (FGM). This includes compositional grading, which enables the allocation of desired materials corresponding to local product requirements. An upcoming AM process fo...

(This article belongs to the Special Issue Advances in Additive Manufacturing of Metals)
  • Article
  • Open Access
9 Citations
8,405 Views
19 Pages

Integrated API and drug product processing enable molecules with high clinical efficacy but poor physicochemical characteristics to be commercialized by direct co-processing with excipients to produce advanced multicomponent intermediates. Furthermor...

  • Article
  • Open Access
24 Citations
3,483 Views
17 Pages

Grain Structure Formation and Texture Modification through Multi-Pass Friction Stir Processing in AlSi10Mg Alloy Produced by Laser Powder Bed Fusion

  • Akbar Heidarzadeh,
  • Mousa Javidani,
  • Mohammadreza Mofarrehi,
  • Pouyan Motalleb-nejad and ,
  • Roghayeh Mohammadzadeh,
  • Hamidreza Jafarian and
  • X.-Grant Chen
  • + 2 authors+ 0 author

19 January 2023

A new strategy is proposed to modify the grain structure and crystallographic texture of laser-powder bed fusion AlSi10Mg alloy using multi-pass friction stir processing (FSP). Accordingly, 1–3 passes of FSP with 100% overlap were performed. Sc...

(This article belongs to the Special Issue Physical Metallurgy of Metals and Alloys)
  • Article
  • Open Access
1 Citations
990 Views
21 Pages

Research on the Mechanical Properties and Failure Mechanism of Lignite Affected by the Strain Rate Under Static and Dynamic Loading Conditions

  • Jiang Yu,
  • Hongfa Ma,
  • Linlin Jin,
  • Feng Wang and ,
  • Dawei Yin,
  • Xiao Qu,
  • Chenghao Han,
  • Jicheng Zhang and
  • Fan Feng
  • + 4 authors+ 0 author

24 September 2025

Coal seams, as critical components of open-pit mine slopes, are subjected to both quasi-static and dynamic loading disturbances during mining operations, with their mechanical properties directly influencing the slope stability. Consequently, to clar...

(This article belongs to the Special Issue Advanced Processes in Mining Safety and Disaster Prevention: From Gas Extraction to Fire/Dust Control)
  • Article
  • Open Access
495 Views
16 Pages

16 May 2026

To eliminate lack-of-fusion (LoF) defects at partition interfaces during laser powder bed fusion of titanium alloys, this study proposes a multi-layer, partitioned-scanning strategy with staggered interfaces. The strategy was optimized through an ort...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
8 Citations
2,448 Views
25 Pages

Interface Optimization, Microstructural Characterization, and Mechanical Performance of CuCrZr/GH4169 Multi-Material Structures Manufactured via LPBF-LDED Integrated Additive Manufacturing

  • Di Wang,
  • Jiale Lv,
  • Zhenyu Liu,
  • Linqing Liu and ,
  • Yang Wei,
  • Cheng Chang,
  • Wei Zhou,
  • Yingjie Zhang and
  • Changjun Han
  • + 4 authors+ 0 author

10 May 2025

CuCrZr/GH4169 multi-material structures combine the high thermal conductivity of copper alloys with the high strength of nickel-based superalloys, making them suitable for aerospace components that require efficient heat dissipation and high strength...

(This article belongs to the Special Issue Development and Applications of Laser-Based Additive Manufacturing)
  • Article
  • Open Access
14 Citations
7,672 Views
22 Pages

24 March 2020

In this research, the idea of multicomponent, one-vessel cleaning of syngas through simultaneous dedusting and adsorption is described. Data presented were obtained with the use of a pilot-scale 60 kWth fixed-bed GazEla reactor, coupled with a dry ga...

(This article belongs to the Special Issue Selected Papers from 27th European Biomass Conference & Exhibition (EUBCE 2019))
  • Article
  • Open Access
2 Citations
3,165 Views
18 Pages

Research on Modeling for the Flow–Compaction Process of Thermosetting Epoxy Resin-Based Composites

  • Ye Jing,
  • Zhenyi Yuan,
  • Kai He,
  • Lingfei Kong and ,
  • Guigeng Yang and
  • Kaite Guo
  • + 1 author+ 0 author

10 March 2025

Addressing the issue of porosity evolution during the curing process of thermosetting epoxy resin-based composites, a simulation model has been developed to describe the flow–compaction behavior of the composites aiming to predict changes in po...

(This article belongs to the Special Issue Polymer Manufacturing Processes)
  • Article
  • Open Access
9 Citations
5,657 Views
17 Pages

18 August 2023

Rapid-cycle pressure swing adsorption (PSA) with small adsorbents particles is intended to improve mass transfer rate and productivity. However, the mass transfer mechanisms are changed with reduction of particle size during rapid-cycle adsorption pr...

  • Article
  • Open Access
3 Citations
10,179 Views
18 Pages

18 September 2015

As cloud computing data centers grow larger and networking devices proliferate; many complex issues arise in the network management architecture. We propose a framework for multi-layer; multi-vendor optical network management using open standards-bas...

(This article belongs to the Section Networks)
  • Review
  • Open Access
28 Citations
8,369 Views
27 Pages

5 June 2024

Over the past decade, significant research has focused on detecting abnormalities in metal laser powder bed fusion (L-PBF) additive manufacturing. Effective online monitoring systems are crucial for enhancing process stability, repeatability, and the...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
11 Citations
2,597 Views
14 Pages

A Systematic Study on Layer-Level Multi-Material Fabrication of Parts via Laser-Powder Bed Fusion Process

  • Andrea Angelastro,
  • Paolo Posa,
  • Vito Errico and
  • Sabina Luisa Campanelli

13 September 2023

In this work, a systematic study was conducted on the fabrication of multi-material components obtained employing Laser-Powder Bed Fusion (L-PBF) technology. The idea of making multi-material components is a winning capability of additive technologie...

(This article belongs to the Special Issue New Trends of Powder Engineering and Additive Manufacturing (Editorial Board Members’ Collection Series))
  • Article
  • Open Access
15 Citations
5,709 Views
18 Pages

Dual-Laser PBF-LB Processing of a High-Performance Maraging Tool Steel FeNiCoMoVTiAl

  • Gregor Graf,
  • Niki Nouri,
  • Stefan Dietrich,
  • Frederik Zanger and
  • Volker Schulze

29 July 2021

As part of an international research project (HiPTSLAM), the development and holistic processing of high-performance tool steels for AM is a promising topic regarding the acceptance of the laser powder bed fusion (PBF-LB) technology for functionally...

(This article belongs to the Special Issue Research and Development of Additive Manufacturing Technology)

of 3