Skip to Content
You are currently on the new version of our website. Access the old version .

75 Results Found

  • Article
  • Open Access
1 Citations
2,098 Views
23 Pages

21 August 2024

Mud caking on shield cutterhead is a critical issue for tunnel safety, and temperature and duration are factors that can affect the characteristics of mud cake. Therefore, the aim of this study is to explore the characteristics of different temperatu...

(This article belongs to the Special Issue Development and Characterization of New Construction Materials and Coatings)
  • Feature Paper
  • Article
  • Open Access
6 Citations
3,286 Views
13 Pages

Comparison of Efficient Ways of Mud Cake Removal from Casing Surface with Traditional and New Agents

  • Marcin Kremieniewski,
  • Rafał Wiśniowski,
  • Stanisław Stryczek and
  • Paweł Łopata

19 June 2021

The tightness of the casing-rock formation interface is one of the most important elements of drilling and cementing jobs. In the absence of the required tightness, there is a risk of gas migration directly to the ground, groundwater or atmosphere. I...

  • Article
  • Open Access
1 Citations
1,253 Views
24 Pages

Mud Spurt Distance and Filter Cake Hydraulic Conductivity of Slurry Shield

  • Xinsheng Yin,
  • Yanhua Zhu,
  • Gang Wei,
  • Yunliang Cui and
  • Zhi Ding

14 October 2025

Maintaining stable tunnel face pressure in slurry shield tunneling is critically dependent on the formation of a low-permeability filter cake. However, the knowledge of the filter cake and mud spurt is not specifically understood. Using a modified fl...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
14 Citations
3,463 Views
17 Pages

Study on Comprehensive Technology of Preventing Mud Cake of Large Diameter Slurry Shield in Composite Stratum

  • Yuan Mei,
  • Dongbo Zhou,
  • Hang Gong,
  • Xin Ke and ,
  • Wangyang Xu and
  • Wenyan Shi
  • + 1 author+ 0 author

28 September 2022

When large-diameter slurry shields are tunneling in a composite stratum with a high clay content, the cutter head may form a mud cake. After the mud cake is formed, it will cover the cutter and reduce the opening rate of the cutter head, thus reducin...

(This article belongs to the Collection Innovation of Materials and Technologies in Civil Construction)
  • Article
  • Open Access
7 Citations
2,206 Views
17 Pages

The complex red-bed geology is primarily composed of iron-rich sedimentary rock layers with clay minerals as a major component. The soil water content exceeds 30%, and its high viscosity and water content lead to the easy formation of mud cake on the...

(This article belongs to the Special Issue Development and Characterization of New Construction Materials and Coatings)
  • Article
  • Open Access
9 Citations
3,533 Views
15 Pages

27 January 2023

Tunnel boring machines often encounter clogging during excavation in strata with rich clay content. The clogging can damage the cutterhead and interrupt excavation. Cutting tool clogging, also known as mud cake formation, has a strong effect on excav...

(This article belongs to the Special Issue Tunnel Construction and Underground Space Technology)
  • Article
  • Open Access
2,117 Views
20 Pages

Risk Assessment of Mud Cake on Shield Cutter Head Based on Modified Analytic Hierarchy Process

  • Wen Cao,
  • Shoubao Xue,
  • Yujia Xu,
  • Huanyu Lin and ,
  • Hui Li,
  • Shengjun Deng,
  • Lin Li and
  • Yun Bai
  • + 3 authors+ 0 author

When the shield machines are constructed in soft soil, excavation may be impeded by the accumulation of cutter head mud. Geological conditions and shield construction are identified as the main factors for cutter head mud formation, based on analysis...

(This article belongs to the Section Computational Engineering)
  • Article
  • Open Access
883 Views
15 Pages

Wellbore Stability Analysis of Shale Formation Considering Sealing Effect of Mud Cake on Drilling Fluid Seepage

  • Qiang Gao,
  • Yun Bai,
  • Shuaizhi Ji,
  • Junying Zhang and ,
  • Shitian Wan,
  • Hongxia He,
  • Feng Huang,
  • Junling Lou and
  • Qiang Li
  • + 4 authors+ 0 author

21 March 2026

Wellbore stability is one of the major challenges during drilling operations in shale gas formations. Drilling fluid seepage can significantly alter the pore pressure around the wellbore, thereby inducing wellbore instability. In this study, the Darc...

(This article belongs to the Special Issue Oil and Gas Well Engineering: Experimental and Numerical Investigation, 2nd Edition)
  • Article
  • Open Access
10 Citations
3,045 Views
15 Pages

12 June 2023

The X-ray computed tomography method has provided unrivalled data about the characterization and evolution of the internal/external structure of materials by analyzing CTN and non-destructive imaging approach. Applying this method on the appropriate...

(This article belongs to the Section Energy and Catalysis)
  • Article
  • Open Access
5 Citations
2,578 Views
14 Pages

28 October 2023

Utilizing lignocellulosic biomass as a renewable energy source for the production of sustainable fuel is of paramount importance. This study focuses on the catalytic co-pyrolysis of Mesua ferrea L. de-oiled cake (MDC) and Garlic husk (GH) as potentia...

(This article belongs to the Section Biomass Catalysis)
  • Article
  • Open Access
7 Citations
3,962 Views
15 Pages

29 September 2019

The major low molecular inhibitors showed inhibition in the hydration of clay in the laboratory for water-based drilling fluids, according to the principle of intercalation adsorption. However, inhibitors have failed and caused serious engineering ac...

  • Article
  • Open Access
12 Citations
3,919 Views
17 Pages

Study on the Influence of Mud Properties on the Stability of Excavated Face of Slurry Shield and the Quality of Filter Cake Formation

  • Hu Wang,
  • Jian Chen,
  • Hongjun Liu,
  • Lei Guo and ,
  • Yao Lu,
  • Xiuting Su,
  • Yongmao Zhu and
  • Tao Liu
  • + 3 authors+ 0 author

In the construction of subsea tunnels, the stability and control of the excavation surface are the main concerns of the engineering community. In this paper, the Xiamen Metro Line 2 is used as the study case. The filter cake formation of mud shields...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
414 Views
16 Pages

Study on the Cementation Mechanism and Interface Enhancement Path of the Second Interface of Oil and Gas Well Cementing

  • Jianwei Zhang,
  • Siyu Tian,
  • Yunfei Long,
  • Xiang Wang and ,
  • Fuping Feng and
  • Xu Han
  • + 1 author+ 0 author

18 June 2026

Residual mud cake on the wellbore significantly compromises the cement–formation interfacial cementation quality. However, the research on the weak cementation mechanism of the cementing interface caused by mud cake properties is insufficient....

(This article belongs to the Section Petroleum and Low-Carbon Energy Process Engineering)
  • Article
  • Open Access
3 Citations
2,206 Views
17 Pages

Filter Cake Neural-Objective Data Modeling and Image Optimization

  • Dennis Delali Kwesi Wayo,
  • Sonny Irawan,
  • Alfrendo Satyanaga,
  • Jong Kim and ,
  • Mohd Zulkifli Bin Mohamad Noor and
  • Vamegh Rasouli
  • + 1 author+ 0 author

19 August 2024

Designing drilling mud rheology is a complex task, particularly when it comes to preventing filter cakes from obstructing formation pores and making sure they can be easily decomposed using breakers. Incorporating both multiphysics and data-driven nu...

(This article belongs to the Section A: Computer Science)
  • Article
  • Open Access
8 Citations
2,845 Views
20 Pages

Enzymatic and Oxidizing Agents for the Decomposition of Polymers Used in the Composition of Drilling Muds

  • Małgorzata Uliasz,
  • Grzegorz Zima,
  • Sławomir Błaż and
  • Bartłomiej Jasiński

16 August 2021

The article presents the results of research on the influence of enzymatic and oxidizing agents on polymers used in drilling mud technology. The research used calcium hypochlorite, urea peroxide, sodium persulfate, amylase and cellulase. This allowed...

(This article belongs to the Special Issue Fundamentals of Enhanced Oil Recovery)
  • Article
  • Open Access
1,167 Views
20 Pages

15 June 2026

Bentonite slurry is frequently used as a support fluid in the construction of drilled shafts. During the piling process, the slurry acts as a sealant and slightly penetrates the nearby soil. However, the degree to which bentonite slurry penetrates th...

(This article belongs to the Section Engineering)
  • Article
  • Open Access
470 Views
22 Pages

Quantitative Evaluation of Drilling Fluid Damage in Fractured Carbonate Reservoirs

  • Jichuan Ren,
  • Gui Bo,
  • Peixuan Xu,
  • Ziqiang Yao and ,
  • Jie He,
  • Rui Liang,
  • Yuhao Liu and
  • Jianchun Guo
  • + 3 authors+ 0 author

9 September 2026

Ultra-deep fractured carbonate reservoirs suffer severe fluid loss and formation damage, requiring accurate characterization of natural fracture parameters and contamination behavior. Current field evaluation methods rely solely on logging data, whic...

(This article belongs to the Special Issue New Technology of Unconventional Reservoir Stimulation and Protection)
  • Article
  • Open Access
2 Citations
1,673 Views
20 Pages

Impact of Barite Nanoparticles on Barite Sag in Water-Based Drilling Fluids

  • Khaled A. Fattah,
  • Salem S. Basaloom,
  • Musaed N. J. AlAwad,
  • Faisal S. Altawati and
  • Mohammed A. Almobarky

26 February 2026

Barite sag remains a persistent challenge in water-based drilling fluids, particularly in high-pressure, high-temperature and deviated wellbores where density variations can compromise well control, hole cleaning, well stability and operational safet...

(This article belongs to the Section Chemical, Civil and Environmental Engineering)
  • Article
  • Open Access
22 Citations
5,304 Views
12 Pages

Nutrient Enriched Municipal Solid Waste Compost Increases Yield, Nutrient Content and Balance in Rice

  • Marufa Sultana,
  • M. Jahiruddin,
  • M. Rafiqul Islam,
  • M. Mazibur Rahman and ,
  • Md Anwarul Abedin and
  • Zakaria M. Solaiman
  • + 1 author+ 0 author

20 January 2021

Globally a huge amount of municipal solid waste (MSW) is being produced which is very difficult to dispose. Composting of MSW is one of the options of solid waste recycling, but its use by the farmers is limited because of its low nutrient status. Th...

(This article belongs to the Special Issue Sustainable Soil Health Management)
  • Article
  • Open Access
9 Citations
4,379 Views
12 Pages

Novel Cake Washer for Removing Oil-Based Calcium Carbonate Filter Cake in Horizontal Wells

  • Osama Siddig,
  • Saad Al-Afnan,
  • Salaheldin Elkatatny and
  • Mohamed Bahgat

22 April 2020

An impermeable layer “filter cake” usually forms during the overbalanced drilling technique. Even though it helps in protecting the formation from a further invasion of drilling fluids, the removal of this layer is essential for a proper...

  • Review
  • Open Access
41 Citations
6,699 Views
25 Pages

Recent Advances of Graphene-Derived Nanocomposites in Water-Based Drilling Fluids

  • Rabia Ikram,
  • Badrul Mohamed Jan,
  • Jana Vejpravova,
  • M. Iqbal Choudhary and
  • Zaira Zaman Chowdhury

11 October 2020

Nanocomposite materials have distinctive potential for various types of captivating usage in drilling fluids as a well-designed solution for the petroleum industry. Owing to the improvement of drilling fluids, it is of great importance to fabricate u...

(This article belongs to the Special Issue Properties and Applications of Graphene and Its Derivatives)
  • Article
  • Open Access
6 Citations
2,181 Views
11 Pages

Increasing the Efficiency of Sealing the Borehole in Terms of Spacer Pumping Time

  • Marcin Kremieniewski,
  • Miłosz Kędzierski and
  • Sławomir Błaż

15 October 2021

The tightness of a borehole is essential for its long-term durability. For this purpose, the column of the pipe is sealed with cement slurry. After contacting the slurry, mud in the borehole is removed. However, the slurry does not effectively remove...

(This article belongs to the Special Issue Fundamentals of Enhanced Oil Recovery)
  • Article
  • Open Access
3 Citations
1,323 Views
36 Pages

7 February 2026

Severe fluid loss in fractured, depleted reservoirs usually defeat conventional water-based drilling fluids (WBDFs), and rigid lost-circulation materials (LCMs) struggle to form durable, conformal seals. We report an eco-oriented colloidal gas aphron...

  • Article
  • Open Access
45 Citations
6,214 Views
20 Pages

Thermoresponsive Bentonite for Water-Based Drilling Fluids

  • Wenxin Dong,
  • Xiaolin Pu,
  • Yanjun Ren,
  • Yufen Zhai and ,
  • Feng Gao and
  • Wei Xie
  • + 1 author+ 0 author

30 June 2019

As an important industrial material, bentonite has been widely applied in water-based drilling fluids to create mud cakes to protect boreholes. However, the common mud cake is porous, and it is difficult to reduce the filtration of a drilling fluid a...

(This article belongs to the Section Smart and Functional Materials)
  • Article
  • Open Access
8 Citations
2,975 Views
11 Pages

26 February 2021

This article presents the results on the basis of which a new hybrid drilling washer fluid was designed. The use of fluid from such a drilling washer increases the mud-cake removal efficiency. Its operation is based on both chemical and mechanical re...

(This article belongs to the Special Issue Advances in Drilling Fluid Technology)
  • Article
  • Open Access
3 Citations
3,239 Views
17 Pages

Study on the Factors Affecting the Performance of a Pressure Filtration–Flocculation–Solidification Combined Method for Mud Slurry Treatment

  • Chao Han,
  • Hongping Xie,
  • Bin Bai,
  • Dongrui Liu and ,
  • Yue Huang and
  • Rongjun Zhang
  • + 1 author+ 0 author

14 October 2023

A pressure filtration–flocculation–solidification combined treatment possesses great potential for the reutilization of the waste mud slurry generated from diverse construction projects as filling material due to its versatility and high...

(This article belongs to the Section Environmental Sciences)
  • Article
  • Open Access
28 Citations
7,089 Views
18 Pages

Comparative Investigation of the Effect of EggshellPowder and Calcium Carbonate as Additivesin Eco-Friendly Polymer Drilling Fluids

  • Asma Nour El Houda Sid,
  • Hichem Tahraoui,
  • Mohammed Kebir,
  • Mohammed Amin Bezzekhami and ,
  • Benalia Kouini,
  • Amel Hind Hassein-Bey,
  • Toumi Selma,
  • Abdeltif Amrane,
  • Ali Imessaoudene and
  • Lotfi Mouni
  • + 5 authors+ 0 author

12 February 2023

Drilling fluid systems have seen the addition of new natural additives in recent years in order to replace traditional additives, improve their rheological properties, and ensure the functionality of the drilling fluid taking into account health and...

(This article belongs to the Special Issue Sustainable Material and Technology in Wastewater Treatment: Contaminant Removal, Adsorption and Nutrient Recovery)
  • Article
  • Open Access
9 Citations
2,519 Views
18 Pages

Experimental Study on Infiltration of Seawater Bentonite Slurry

  • Hongzhen Dong,
  • Deming Wang,
  • Zhipeng Li,
  • Qingsong Zhang and ,
  • Yirui Li,
  • Jianguo Zhang,
  • Lianzhen Zhang and
  • Luchen Zhang
  • + 3 authors+ 0 author

23 August 2024

A bentonite slurry mixed with seawater is prone to sedimentation, which will reduce the quality of the filter cake and lower the stability of the excavation surface in undersea tunnels. It is necessary to study the performance and influencing factors...

(This article belongs to the Special Issue Construction in Urban Underground Space)
  • Article
  • Open Access
9 Citations
2,783 Views
17 Pages

Application of a Core-Shell Structure Nano Filtration Control Additive in Salt-Resistant Clay-Free Water-Based Drilling Fluid

  • Gang Wang,
  • Wanjun Li,
  • Shixin Qiu,
  • Jitong Liu and ,
  • Zhiting Ou,
  • Xiaogang Li,
  • Fei Ji,
  • Liang Zhang,
  • Shanshan Liu and
  • Guancheng Jiang
  • + 6 authors+ 1 author

6 November 2023

When drilling into a reservoir, the drilling fluid containing bentonite is prone to solid phase invasion, causing serious damage to the reservoir, and the conventional API barite suspension stability is poor, which makes it easy to cause sedimentatio...

(This article belongs to the Section Polymer Chemistry)
  • Article
  • Open Access
13 Citations
3,159 Views
15 Pages

Effect of Cleaning the Annular Space on the Adhesion of the Cement Sheath to the Rock

  • Marcin Kremieniewski,
  • Sławomir Błaż,
  • Stanisław Stryczek,
  • Rafał Wiśniowski and
  • Andrzej Gonet

22 August 2021

Drilling boreholes in gas zones and in zones with the possibility of migration or gas exhalation requires a high index of well tightness. An important parameter determining the effectiveness of sealing the annular space is the adhesion of the cement...

(This article belongs to the Special Issue Fundamentals of Enhanced Oil Recovery)
  • Article
  • Open Access
14 Citations
2,864 Views
10 Pages

12 October 2022

In this paper, nano plugging agent AMPS/AM was prepared, and its plugging performance was evaluated by a microfracture simulation experiment and a shale pressure resistance experiment. The pressure loss decreased by 66.09% compared with the top press...

(This article belongs to the Special Issue Reservoir Formation Damage Analysis)
  • Article
  • Open Access
116 Citations
21,265 Views
13 Pages

Effect of pH on Rheological and Filtration Properties of Water-Based Drilling Fluid Based on Bentonite

  • Hany Gamal,
  • Salaheldin Elkatatny,
  • Salem Basfar and
  • Abdulaziz Al-Majed

27 November 2019

The design of drilling fluids is very important for the drilling operation success. The rheological properties play a key role in the performance of the drilling fluid. Therefore, studying the mud rheological properties of the water-based drilling fl...

(This article belongs to the Special Issue Drilling Technologies and Process Safety)
  • Feature Paper
  • Article
  • Open Access
13 Citations
4,501 Views
17 Pages

Eco-Friendly Drilling Fluid: Calcium Chloride-Based Natural Deep Eutectic Solvent (NADES) as an All-Rounder Additive

  • Muhammad Hammad Rasool,
  • Maqsood Ahmad,
  • Numair Ahmed Siddiqui and
  • Aisha Zahid Junejo

21 July 2023

Designing an effective drilling mud is a critical aspect of the drilling process. A well-designed drilling mud should not only provide efficient mud hydraulics but also fulfill three important functions: enhancing mud rheology, inhibiting hydrate for...

(This article belongs to the Topic Drilling, Completion and Well Engineering for the Natural Energy Resources Extraction, Storage and Sustainable Management)
  • Article
  • Open Access
14 Citations
2,971 Views
13 Pages

Synthesis and Plugging Performance of Poly (MMA-BA-ST) as a Plugging Agent in Oil-Based Drilling Fluid

  • Jian Yang,
  • Zhen Lei,
  • Bo Dong,
  • Zhongqiang Ai and ,
  • Lin Peng and
  • Gang Xie
  • + 1 author+ 0 author

15 October 2022

Nanopolymer was developed in order to solve the problem that the micron-scale plugging agent cannot effectively plug nanopores, which leads to instability of the wellbore. The oil-based nano plugging agent poly (MMA-BA-ST) was synthesized by Michael...

(This article belongs to the Special Issue Reservoir Formation Damage Analysis)
  • Article
  • Open Access
37 Citations
3,736 Views
14 Pages

Experimental Study of Sand Production during Depressurization Exploitation in Hydrate Silty-Clay Sediments

  • Jingsheng Lu,
  • Dongliang Li,
  • Yong He,
  • Lingli Shi and ,
  • Deqing Liang and
  • Youming Xiong
  • + 1 author+ 0 author

8 November 2019

Silty-clay reservoirs are a weak point in sand production and sand control studies due to their low economy. However, China’s marine natural gas hydrates (NGH) mostly exist in silty-clay sediments, which restrict the sustainable and efficient d...

  • Article
  • Open Access
8 Citations
2,134 Views
17 Pages

Experimental Study of the Application of Calcined Shield Muck Powder as a Substitute for Fly Ash in Synchronous Tunnel Grouting Materials

  • Wei Liu,
  • Enfeng Wu,
  • Hangyu Du,
  • Hu Liu and ,
  • Suyun Liu,
  • Kangqi Chang and
  • Yongqiang Li
  • + 2 authors+ 0 author

21 January 2025

During shield tunnel construction, waste mud is a significant source of urban construction waste. However, the disposal of waste mud has always been a challenge in engineering. Addressing the challenge of harmlessly disposing of, or repurposing, mud...

  • Article
  • Open Access
1 Citations
1,646 Views
15 Pages

24 October 2023

The Hullera Vasco Leonesa (HVL) underground coal mine in northern Spain is subject to violent methane (CH4) outbursts. Vertical wells are used to extract CH4 from coal layers to improve mine safety. Bentonite suspensions are used as drilling fluids i...

(This article belongs to the Section H: Geo-Energy)
  • Article
  • Open Access
2,413 Views
24 Pages

Numerical Simulation of Drilling Fluid-Wellbore Interactions in Permeable and Fractured Zones

  • Diego A. Vargas Silva,
  • Zuly H. Calderón,
  • Darwin C. Mateus and
  • Gustavo E. Ramírez

In well drilling operations, interactions between drilling fluid water-based and the well-bore present significant challenges, often escalating project costs and timelines. Particularly, fractures (both induced and natural) and permeable zones at the...

  • Feature Paper
  • Article
  • Open Access
7 Citations
3,412 Views
23 Pages

Developing New Water-Based Drilling Fluid Additives for Mitigating Filtration Loss at High Pressure and High Temperature

  • Sachitha Sulakshana,
  • Foad Faraji,
  • Hossein Habibi,
  • David J. Hughes and ,
  • Mardin Abdalqadir and
  • Jagar A. Ali
  • + 1 author+ 0 author

7 January 2026

Sustainable oil and gas development demands eco-friendly and cost-effective drilling fluids. Water-based drilling fluids (WBDFs) are preferred over oil-based alternatives for their lower environmental impact, but they often suffer from excessive flui...

(This article belongs to the Special Issue Eco-Friendly Drilling Fluids: Biodegradable Formulations and Performance Evaluation)
  • Article
  • Open Access
27 Citations
4,266 Views
17 Pages

A Novel Ascorbic Acid Based Natural Deep Eutectic Solvent as a Drilling Mud Additive for Shale Stabilization

  • Muhammad Hammad Rasool,
  • Maqsood Ahmad,
  • Muhammad Ayoub and
  • Muhammad Adeem Abbas

7 April 2023

During drilling, almost 70% of wellbore instability issues result from the encountering of shale formations. Various additives such as salts, silicates, and polymers are used in water-based mud to enhance its shale-inhibition capability; however, suc...

(This article belongs to the Section Chemical Processes and Systems)
  • Article
  • Open Access
2 Citations
1,629 Views
15 Pages

12 October 2024

The disposal and reutilization of the enormous amounts of slurry-like mud (MS) dredged from navigation channel construction, ecological dredging, and other construction activities have been receiving increasing attention. In this paper, a flocculatio...

  • Article
  • Open Access
1 Citations
1,737 Views
20 Pages

Evaluation and Optimization of Multi-Interface Lubrication Performance of Oil-Based Drilling Fluids for Extended-Reach Wells

  • Wei Liu,
  • Lei Wang,
  • Ming Zheng,
  • Bo Chen and ,
  • Jian Wang,
  • Fuchang Shu and
  • Xiaoqi Tan
  • + 2 authors+ 0 author

19 August 2025

Extended-reach drilling (ERD) offers substantial economic and operational benefits by accessing extensive reservoir sections with fewer surface facilities, yet poses significant frictional challenges due to complex wellbore geometries and extreme ope...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
1,024 Views
29 Pages

Feasibility Study of Rice and Bread Waste as Sustainable Fluid Loss Additives in Water-Based Drilling Fluids

  • Sachitha Illangage,
  • Hossein Habibi,
  • Aung Myin Chit,
  • Foad Faraji and ,
  • David J. Hughes,
  • Mardin Abdalqadir and
  • Jagar A. Ali
  • + 2 authors+ 0 author

22 July 2026

Drilling fluids are essential in oil and gas operations for wellbore stability, cuttings transport, pressure control, and fluid-loss reduction. Water-based drilling fluids (WBDFs) are widely used because of their cost-effectiveness and lower environm...

(This article belongs to the Special Issue Sustainable Waste Material Recovery Technologies)
  • Article
  • Open Access
35 Citations
6,329 Views
10 Pages

Evaluation of a Novel Poultry Litter Amendment on Greenhouse Gas Emissions

  • Kelsey Anderson,
  • Philip A. Moore,
  • Jerry Martin and
  • Amanda J. Ashworth

28 April 2021

Gaseous emissions from poultry litter causes production problems for producers as well as the environment, by contributing to climate change and reducing air quality. Novel methods of reducing ammonia (NH3) and greenhouse gas (GHG) emissions in poult...

(This article belongs to the Section Air Quality)
  • Article
  • Open Access
46 Citations
4,892 Views
15 Pages

New Zwitterionic Polymer as a Highly Effective Salt- and Calcium-Resistant Fluid Loss Reducer in Water-Based Drilling Fluids

  • Luman Liu,
  • Jinsheng Sun,
  • Ren Wang,
  • Fan Liu and ,
  • Shifeng Gao,
  • Jie Yang,
  • Han Ren,
  • Yuanzhi Qu,
  • Rongchao Cheng and
  • Zhenbo Feng
  • + 6 authors+ 1 author

11 November 2022

To control the filtration loss of drilling fluids in salt–gypsum formations, a novel type of zwitterionic polymer gel (DNDAP) was synthesized by free radical polymerization, which was used as a salt- and calcium-resistant fluid loss reducer for...

(This article belongs to the Special Issue Gels for Oil Drilling and Enhanced Recovery)
  • Article
  • Open Access
1 Citations
1,882 Views
21 Pages

12 July 2023

Marine natural gas hydrate (NGH) can mainly be found in argillaceous fine-silt reservoirs, and is characterized by weak consolidation and low permeability. Sand production is likely to occur during the NGH production process, and fine-silt particles...

(This article belongs to the Special Issue Natural Gas Hydrate Production Technology and Rock Mechanics in Petroleum Engineering (Volume II))
  • Article
  • Open Access
6 Citations
1,677 Views
10 Pages

Study on Plugging Microfracture by Using High-Temperature Emulsified Bitumen

  • Liang Yang,
  • Xiang Chen,
  • Linhao Gu,
  • Yan Chen and
  • Shuang Shi

26 March 2024

A new kind of modified emulsified bitumen used to plug a microcrack was studied. The sizes of high-temperature emulsified bitumen were fit for the sizes of the microcrack, which were approved by the scanning electron microscope and laser particle siz...

(This article belongs to the Special Issue Novel Cleaner Materials for Pavements)
  • Article
  • Open Access
33 Citations
3,808 Views
21 Pages

Synthesis of a Low-Molecular-Weight Filtrate Reducer and Its Mechanism for Improving High Temperature Resistance of Water-Based Drilling Fluid Gel System

  • Xiaodong Dong,
  • Jinsheng Sun,
  • Xianbin Huang,
  • Jian Li and ,
  • Kaihe Lv and
  • Pengxin Zhang
  • + 1 author+ 0 author

28 September 2022

During the exploitation of deep and ultradeep oil and gas resources, the high-temperature problem of deep reservoirs has become a major challenge for water-based drilling fluids. In this study, a novel high-temperature-resistant filtrate reducer (LDM...

(This article belongs to the Special Issue Advanced Gels for Oil Recovery)
  • Article
  • Open Access
27 Citations
3,986 Views
18 Pages

20 May 2022

Filtration loss control under high-temperature conditions is a worldwide issue among water-based drilling fluids (WBDFs). A core–shell high-temperature filter reducer (PAASM-CaCO3) that combines organic macromolecules with inorganic nanomateria...

(This article belongs to the Special Issue Gels for Oil and Gas Industry Applications)
  • Article
  • Open Access
448 Views
15 Pages

27 July 2026

With the continuous increase in horizontal displacement during unconventional oil and gas drilling, drilling operations are commonly plagued by high frictional resistance, severe pipe sticking issues and difficulties in directional drilling. Conventi...

(This article belongs to the Topic Polymer Gels for Oil Drilling and Enhanced Recovery)

of 2