Ice formation on concrete surfaces significantly challenges productivity, economic growth, and safety in diverse industrial sectors. Superhydrophobic coatings represent an effective solution to delay ice formation, although their functionality deteri...
Gas sensors based on carbon nanotubes (CNTs) as channel materials have been widely considered as promising candidates for the detection of toxic gas. However, effectively detecting methane (CH4) with CNTs-based sensors remains challenging because non...
Many researchers have carried out experimental research and theoretical analysis on hydrogen storage in carbon nanotubes (CNTs), but the results are very inconsistent. The present paper reviewed recent progress in improving the hydrogen storage prope...
Porous composites utilize their unique pore structures to effectively store and release lubricants, providing a fundamental mechanism for continuous lubrication in self-lubricating bearing cages. This study investigates carbon nanotube (CNT)-reinforc...
In this paper, effective separation of oil from both immiscible oil–water mixtures and oil-in-water (O/W) emulsions are achieved by using poly(dimethylsiloxane)-based (PDMS-based) composite sponges. A modified hard template method using citric acid m...
Conventional hydrophobic membrane-based membrane distillation (MD) has been applied for ammonia recovery from an anaerobic digestion (AD) effluent. However, the typical hydrophobic membranes do not have selectivity for ammonia and water vapor, which...
Matrix metalloproteinases (MMPs) are essential proteins acting directly in the breakdown of the extra cellular matrix and so in cancer invasion and metastasis. Given its impact on tumor angiogenesis, monitoring MMP-14 provides strategic insights on c...
The addition of nano-sized fillers into the polymer matrix of carbon fiber laminates is considered today as one of the ways of increasing the strength and resistance of the material to mechanical loads. The paper considers the effect of the addition...
The inherent π–π interfacial interaction between carbon nanotubes (CNTs) and polystyrene (PS) makes the CNT/PS composite a representative thermoplastic nanocomposite. However, the strong van der Waals force among CNTs poses challenges to...
Nanocomposites based on poly(styrene-block-isobutylene-block-styrene) (SIBS) and single-walled carbon nanotubes (CNTs) were prepared and characterized in terms of tensile strength as well as bio- and hemocompatibility. It was shown that modification...
The effect of ionic surfactants and manufacturing methods on the separation and distribution of multi-wall carbon nanotubes (CNTs) in a silicone matrix are investigated. The CNTs are dispersed in an aqueous solution of the anionic surfactant dodecylb...
In this study, Ni-W/carbon nanotube (CNT) composite platings are electrodeposited onto steel plate as a possible coating material for the polymer electrolyte membrane fuel cell (PEMFC) bipolar plate, which requires high corrosion resistance under aci...
In-situ liquid-phase hydrogenation of m-chloronitrobenzene (m-CNB) based on aqueous-phase reforming (APR) of ethanol and catalytic hydrogenation was carried out over Fe-modified Pt/carbon nanotubes (CNTs) catalysts. The effects of Pt loading over CNT...
In order to solve the problem of poor interfacial adhesion between aramid fibers and a rubber matrix, an efficient and mild modification method was proposed via polydopamine and mercapto functionalized graphene oxide (GO) and carbon nanotube (CNTs) h...
This paper focuses on the fabrication via simple melt blending of thermotropic liquid crystal polyester (TLCP) nanocomposites reinforced with a very small quantity of modified carbon nanotube (CNT) and the unique effects of the modified CNT on the ph...
In this study, we comprehensively compare electrical conduction behavior under an applied electric field and electrical conductivity variation with temperature in low-density polyethylene (LDPE)/CNT composites with different dispersions and covalent...
The influence of carbon nanotube (CNT) modification on the dispersion and localization behavior of the CNTs in immiscible blends of polystyrene (PS) and polybutadiene (PB), and in the nanostructured morphology of a star-shaped styrene-butadiene based...
Different studies in the literature indicate the effectiveness of CNTs as reinforcing materials in cement–matrix composites due to their high mechanical strength. Nevertheless, their incorporation into cement presents some difficulties due to t...
The addition of carbon nanotubes (CNTs), which are hydrophobic materials, significantly influences the rheology of cementitious materials but requires important mix modifications in order to provide proper flowability for further use. This paper inve...
In order to develop highly efficient and stable catalysts for oxygen reduction reaction (ORR) that do not contain precious metals, it is necessary to modify carbon nanotubes (CNT) and define the effect of the modification on their activity in the ORR...
Several methodologies have been implemented with the intent of preventing or reducing the formation of biofilms on indwelling urinary devices. The use of carbon nanotubes (CNTs) in the biomedical field has been increasing, particularly in the product...
In this study, which was inspired by mussel-biomimetic bonding research, carbon nanotubes (CNTs) were interfacially modified with polydopamine (PDA) to prepare a novel nano-filler (CNTs@PDA). The structure and properties of the CNTs@PDA were studied...
The homogeneous distribution of carbon nanotubes (CNTs) in the Cu matrix and good interfacial bonding are the key factors to obtain excellent properties of carbon nanotube-reinforced Cu-based composites (CNT/Cu). In this work, silver-modified carbon...
Carbon nanotubes (CNTs) have displayed great potential as anode materials for lithium ion batteries (LIBs) due to their unique structural, mechanical, and electrical properties. The measured reversible lithium ion capacities of CNT-based anodes are c...
Modification of thin-film composite (TFC) nanofiltration (NF) membranes to increase permeability and improve separation performance remains a significant challenge for water scarcity. This study aimed to enhance the permeability and selectivity of tw...
Fibrous carbon nanotubes (CNTs) and lamellar graphene oxide (GO) exhibit significant advantages for improving the fatigue properties of rubber composites. In this work, the synergistic effect of CNTs and GO on the modification of the microstructure a...
Membrane filtration is an effective technique for separating micro- and nano-sized oil droplets from harmful oil-contaminated waters produced by numerous industrial activities. However, significant flux reduction discourages the extensive application...
In this research, the enhancement in electrochemical performance of pyrolyzed carbon microelectrodes by surface modification is investigated. For the proposed microfabrication process, pyrolyzed carbon microelectrodes with multi-walled carbon nanotub...
The addition of unmodified carbon nanotubes (CNTs) to epoxy resin will cause a decrease in the initial thermal decomposition temperature of the EP/CNT composite material, likely due to the weak interfacial adhesion between the nanofiller and its surr...
Carbon fiber (CF) reinforced composites are widely used due to their excellent properties. However, the smooth surface and few functional groups of CFs can lead to fiber fractures and pullout, which reduce the service life of the composites. The over...
Nano biochemical sensors play an important role in detecting the biomarkers related to human diseases, and carbon nanotubes (CNTs) have become an important factor in promoting the vigorous development of this field due to their special structure and...
This review paper explores the formation of carbon nanotube (CNT) polymer composites as a function of material and processing parameters. The effect of different polymer systems, increasing multiwall CNT content, modification of CNTs, processing cond...
Titanium (Ti)-coated multiwall carbon nanotubes (CNTs) emitters based on the magnetron sputtering process are demonstrated, and the influences of modification to CNTs on the residual gas adsorption, gas desorption, and their field emission characteri...
Carbon nanotubes (CNTs) are commonly used to reinforce and functionalize cement matrices, thereby imparting new properties. To facilitate the introduction of CNTs into inorganic matrices such as cement, the use of a master batch is advantageous. In t...
Carbon nanotubes (CNTs) functionalized with metal oxides exhibit synergistic properties that enhance their performance across various applications, particularly in electrochemistry. Recent advancements have highlighted the potential of CNT–meta...
We prepared electrically conductive polystyrene (PS) nanocomposites by incorporating non-covalently surface-modified carbon nanotubes (CNTs) with hydrophilic polymers such as polydopamine (PDA) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfona...
In this paper, dopamine (DA) was used for the surface modification of carbon nanotubes (CNTs) to solve the agglomeration problem. High resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS) were utilized to und...
To enhance the interfacial adhesion between poly(p-phenylene terephthalamide) (PPTA) fibers and a rubber matrix without damaging the fiber structures, aminated carbon nanotubes (NH2-CNTs) were mildly deposited onto the fiber surface by combining the...
In this work, composites based on AA5049 aluminium alloy reinforced with multiwalled carbon nanotubes (CNTs) and multiwalled TiC-coated CNTs were prepared by powder metallurgy. For the first time, the effect of TiC coating on the CNT surface on the f...
One-dimensional carbon nanotubes (CNTs) are promising for future nanoelectronics and optoelectronics, and an understanding of electrical contacts is essential for developing these technologies. Although significant efforts have been made in this dire...
Carbon nanotubes (CNTs) serve as exceptional multifunctional supports for metal phthalocyanine (MPc)-based electrocatalysts, effectively addressing the inherent limitations of molecular catalysts such as poor conductivity and aggregation. This review...
Poly-L-lactic acid (PLLA) is an environmentally friendly and renewable polymer material with excellent prospects, but its low crystallization rate greatly limits its application. Through the amidation reaction between amino hyperbranched polymer (HBP...
Improvements in sodium intercalation in sodium cathodes have been debated in recent years. In the present work, we delineate the significant effect of the carbon nanotubes (CNTs) and their weight percent in the intercalation capacity of the binder-fr...
Organic thermoelectric (TE) materials have been widely investigated due to their good stability, easy synthesis, and high electrical conductivity. Among them, polyaniline/carbon nanotubes (PANI/CNTs) composites have attracted significant attention fo...
This review presents an update on nanotube functionalization, including an investigation of their methods and applications. The review starts with the discussion of microscopy and spectroscopy investigations of functionalized carbon nanotubes (CNTs)....
This review summarizes the recent advancements in the mechanical properties of nanocomposites reinforced with surface-modified carbon nanotubes (CNTs). A range of matrices, namely, polymers, metals, and cement, is investigated, which have demonstrate...
Pure polyamide 6 (PA6) and polyamide 6/carbon nanotube (PA6/CNT) composite samples with 0.5 weight percent loading of pristine or functionalized CNTs were made using a solution mixing technique. Modification of nanotube surface as a result of chemica...
This research aimed to evaluate the toxic effect of multi-walled carbon nanotubes (MW-CNTs) on yeast cells in order to apply MW-CNTs for possible improvement of the efficiency of microbial biofuel cells. The SEM and XRD analysis suggested that here u...
The preparation of carbon nanotube (CNT)/PdO nanoparticles and graphene oxide (GO)/PdO nanoparticle hybrids via a general aqueous solution strategy is reported. The PdO nanoparticles are generated in situ on the CNTs and GO by a one-step “green” synt...
To date, there has been limited information in the literature on the application of carbon fibre-carbon nanotube systems for the modification of poly(vinyl chloride) (PVC) matrixes by micro- and nanometric fillers and an evaluation of the properties...
of 4