Performances of textured crystalline-silicon (c-Si) solar cells enhanced by silver nanoparticles (Ag-NPs) and indium nanoparticles (In-NPs) plasmonic effects are experimentally demonstrated and compared. Plasmonic nanoparticles integrated into textur...
This paper reports impressive improvements in the optical and electrical performance of metal-oxide-semiconductor (MOS)-structure silicon solar cells through the incorporation of plasmonic indium nanoparticles (In-NPs) and an indium-tin-oxide (ITO) e...
In this study, we sought to enhance the output power and conversion efficiency of textured silicon solar cells by layering two-dimensional indium nanoparticles (In NPs) within a double-layer (SiNx/SiO2) antireflective coating (ARC) to induce plasmoni...
In this study, we sought to improve the light trapping of textured silicon solar cells using the plasmonic light scattering of indium nanoparticles (In NPs) of various dimensions. The light trapping modes of textured-silicon surfaces with and without...
Allyl–indium species are known to smoothly react with electrophiles as epoxides. The intrinsic tension of these cyclic systems makes them very reactive starting materials, giving access to more complex products through regioselective ring-openi...
According to recent research, indium nanoparticles (NPs) are more toxic than micro-sized particles. While cases of indium lung disease have been reported worldwide, very little research has been conducted on the occupational exposure to indium NPs. R...
This study investigates the structural, optical, and photocatalytic properties of cadmium oxide (CdO) nanoparticles (NPs) and indium–tin oxide (ITO)-doped CdO NPs. The synthesis of CdO NPs and ITO NPs was accomplished through the co-precipitati...
The conversion efficiency of 800 nm, 65 fs radiation toward high-order harmonic generation (HHG) in laser-induced plasmas containing spherical and non-spherical nanoparticles (NPs) produced during the laser ablation of different metals in water using...
This paper describes a rapid bottom-up approach to selectively functionalize gold nanoparticles (AuNPs) on an indium tin oxide (ITO) substrate using the plasmon confinement effect. The plasmonic substrates based on a AuNP-free surfactant were fabrica...
This work reports the formation of silver nanoparticles (AgNPs) by sputter deposition in thin films of three different ionic liquids (ILs) with the same anion (bis(trifluoromethylsulfonyl)imide) and cation (imidazolium), but with different alkyl chai...
The improved binding ability of graphene–nanoparticle composites to proteins or molecules can be utilized to develop new cell-based assays. In this study, we fabricated reduced graphene oxide–gold nanoparticles (rGO-AuNP) electrodeposited...
In this study, we sought to enhance the photovoltaic performance of silicon solar cells by coating them (via the spin-on film technique) with a layer of SiO2 containing plasmonic indium-tin-oxide nanoparticles (ITO-NPs) of various concentrations. We...
Hybrid nanocomposites of silver nanoparticles and multiwalled carbon nanotubes (AgNPs/MWCNTs) were successfully synthesized by a green one-step method without using any organic solvent. The synthesis and attachment of AgNPs onto the surface of MWCNTs...
Copper indium gallium sulfo-selenide (CIGS) based solar cells show the highest conversion efficiencies among all thin-film photovoltaic competition. However, the absorber material manufacturing is in most cases dependent on vacuum-technology like spu...
We designed and fabricated guided-mode resonance (GMR) gratings on indium-tin-oxide (ITO) thin film to generate a significantly enhanced local electric field for surface-enhanced Raman scattering (SERS) spectroscopy. Ag nanoparticles (NPs) were self...
In this study, the electrically driven perovskite light-emitting diodes (PeLEDs) were investigated by hybridizing the organic polyethylene oxide, 1,3,5-tris (N-phenylbenzimiazole-2-yl) benzene (TPBi), and bis(3,5-difluoro-2-(2-pyridyl)phenyl-(2-carbo...
Conductive indium-tin oxide (ITO) and non-conductive glass substrates were successfully modified with embedded gold nanoparticles (AuNPs) formed by controlled thermal annealing at 550 °C for 8 h in a preselected oven. The authors characterized th...
We report a comparison of sensors’ performance of different hybrid nanomaterial architectures modifying an indium tin oxide (ITO) electrode surface. Diazonium salts and gold nanoparticles (AuNPs) were used as building units to design hybrid thi...
The effect of TiO2 nanoparticle (NP) content on the improvement of poly(9,9′-di-n-octylfluorenyl-2,7-diyl) (PFO)/Fluorol 7GA organic light emitting diode (OLED) performance is demonstrated here. The PFO/Fluorol 7GA blend with specific ratios of TiO2...
The nitrate ion (NO3−) is a typical pollutant in environmental samples, posing a threat to the aquatic ecosystem and human health. Therefore, rapid and accurate detection of NO3− is crucial for both the aquatic sciences and government reg...
Graphene derivatives have immense potential in stem cell research. Here, we report a three-dimensional graphene/arginine-glycine-aspartic acid (RGD) peptide nanoisland composite effective in guiding the osteogenesis of human adipose-derived mesenchym...
Gold nanoparticles (AuNPs) possess remarkable optical properties and electrical conductivity, making them highly relevant in various fields such as medical diagnoses, biological imaging, and electronic sensors. However, the existing methods for modul...
Herein, we report the biocompatible amine-functionalized gadolinium oxide nanoparticles (Gd2O3 NPs) for the possibility of electrochemical detection of Vibrio cholerae (Vc) cells. The microwave irradiation process is applied to synthesize Gd2O3 NPs....
Dielectric/Ag/dielectric (DAD) multilayer thin-film transparent electrode features high visible-light transmittance, low sheet resistance, good mechanical flexibility, and low haze. The fabrication techniques are compatible with large-scale integrate...
Silver nanowire (Ag NWs) networks with high transparency and low resistivity are widely used as promising candidates for the replacement of indium tin oxide (ITO)-based transparent conducting oxides (TCOs) in light-emitting diodes (LEDs). However, LE...
Plant extracts have been utilized as an ecofriendly natural reducing agent for the synthesis of nanomaterials, including metal oxides. Prickly pear (opuntia) fruit extract (PPE) was used as a reducing agent for the sol–gel synthesis of titanium...
High-stability, high-efficiency, and low-cost solar photoelectrochemical (PEC) water splitting has great potential for hydrogen-energy applications. Here, we report on gold/titanium dioxide (Au/TiO2) nanofiber structures grown directly on a conductiv...
Construction of liquid crystal (LC) alignment by introducing polyimide (PI) to indium tin oxide (ITO) electrodes is one of the main methods to realize high-resolution images in liquid crystal displays (LCD). However, the loss of transmittance caused...
The accurate determination of nitrite in food samples is of great significance for ensuring people’s health and safety. Herein, a rapid and low-cost detection method was developed for highly sensitive and selective detection of nitrite based on...
Waveguide–plasmon polaritons sustained in metallic photonic crystal slabs show fascinating properties, such as narrow bandwidth and ultrafast dynamics crucial for biosensing, light emitting, and ultrafast switching. However, the patterning of m...
High-quality titanium dioxide (TiO2 or titania) nanoparticles (TiO2NPs) with tailored morphologies are desirable for efficient photovoltaic applications. In this view, some thin films containing spherical TiO2NPs were prepared on indium tin oxide (IT...
Quantum dots (QDs) have outstanding optical properties such as strong fluorescence, excellent photostability, broad absorption spectra, and narrow emission bands, which make them useful for bioimaging. However, cadmium (Cd)-based QDs, which have been...
The analysis of circulating tumor cells (CTCs) in the peripheral blood of cancer patients is critical in clinical research for further investigation of tumor progression and metastasis. In this study, we present a novel surface-enhanced Raman scatter...
In the present study, indium tin oxide (ITO) was used as a transparent working electrode for the development of an electrochemical sensor for the detection of mercury (II) ions (Hg2+). The electrode was modified by direct electrodeposition of polyani...
Soil contamination with indium (In) oxide nanoparticles (In2O3-NPs) threatens plant growth and development. However, their toxicity in plants under ambient (aCO2) and elevated (eCO2) conditions is scarcely studied. To this end, this study was conduct...
Materials and processing of transparent electrodes (TEs) are key factors to creating high-performance translucent perovskite solar cells. To date, sputtered indium tin oxide (ITO) has been a general option for a rear TE of translucent solar cells. Ho...
In the present paper, In2O3 NPs were synthesized by a wet-chemical method, in the absence and presence of the surfactant, and deposited as thin films on silicon substrates. After deposition, the films were subjected to rapid thermal annealing (RTA) a...
This paper experimentally demonstrates the benefits of combining an up-conversion (UC) layer containing Yb/Er-doped yttrium oxide-based phosphors with a plasmonic scattering layer containing indium nanoparticles (In-NPs) in enhancing the photovoltaic...
Flexible organic light-emitting diodes (FOLEDs) have promising potential for future wearable applications because of their exceptional mechanical flexibility. Silver nanowire (Ag NW) networks are the most promising candidates to replace indium tin ox...
Methane (CH4), as the main component of natural gas and coal mine gas, is widely used in daily life and industrial processes and its leakage always causes undesirable misadventures. Thus, the rapid detection of low concentration methane is quite nece...
Breast cancer (BC) is one of the most common types of cancer disease worldwide and it accounts for thousands of deaths annually. Lapatinib is among the preferred drugs for the treatment of breast cancer. Possible drug toxicity effects of lapatinib ca...
In the frame of the nanoarchitectonic concept, the objective of this study was to develop simple and easy methods to ensure the preparation of polymorphic HfO2 thin film materials (<200 nm) having the best balance of patterning potential, reproduc...
A non-invasive method for detecting glucose is pursued by millions of diabetic patients to improve their personal management of blood glucose. In this work, a novel CuO nanoparticles (NPs) decorated polycaprolactone@polypyrrole fibers modified indium...
Acute myocardial infarction (AMI), commonly known as a heart attack, is a life-threatening condition that causes millions of deaths every year. In this study, a transistor-based biosensor is developed for rapid and sensitive detection of cardiac trop...
There is a consistent demand for developing highly sensitive, stable, cost-effective, and easy-to-fabricate creatinine sensors as creatinine is a reliable indicator of kidney and muscle-related disorders. Herein, we reported a highly sensitive and se...
Non-volatile memory (NVM) devices based on three-terminal thin-film transistors (TFTs) have gained extensive interest in memory applications due to their high retained characteristics, good scalability, and high charge storage capacity. Herein, we re...
Improving morphological and electronic properties of the electron transport layer (ETL) is a critical issue to fabricate highly efficient perovskite solar cells. Tin dioxide is used as an ETL for its peculiarities such as low-temperature solution-pro...
Rapid, highly sensitive, and accurate detection of tumor biomarkers in serum is of great significance in cancer screening, early diagnosis, and postoperative monitoring. In this study, an electrochemiluminescence (ECL) immunosensing platform was cons...
8-Hydroxydeoxyguanosine (8-OHdG) is the most widely used oxidative stress biomarker of the free radical-induced oxidative damage product of DNA, which may allow a premature assessment of various diseases. This paper designs a label-free, portable bio...
Through reducing the system InCl3-Li-DTBB(cat.) in THF at room temperature and in the absence of any additives or anti-caking ligand, we have synthesized indium nanoparticles (InNPs) of about 4 nm. The catalyst was employed in the allylation of carbo...
of 2