Synthetic organic pigments like xanthene and azo dyes from the direct discharge of textile effluents are considered colossal global issues and attract the concern of scholars. Photocatalysis continues to be a very valuable pollution control method fo...
Bacterial cellulose (BC), chitosan (Chi), and collagen (Col) are known as biopolymers which have met some properties that are required as wound dressing. This study focused on investigating the fabrication of BC-based wound dressing with chitosan and...
A series of Ni/Ce\(_{x}\)Zr\(_{1-x}\)O\(_{2}\)/SiO\(_{2}\) catalysts with different Zr/Ce mass ratios were prepared by incipient wetness impregnation. Ni/SiO\(_{2}\), Ni/CeO\(_{2}\) and Ni/ZrO\(_{2}\) were also prepared as reference materials to comp...
The paper focuses on investigating the effect of impregnation of recycled concrete aggregate on the mechanical and durability properties of concrete using this aggregate. Cement paste, limewater and diluted water glass were used to impregnate the agg...
In this paper, a novel resorcinol-formaldehyde-free and environmentally friendly adhesives for polyester (PET) fiber impregnation treatment were compounded successfully. First, a network structure was formed by reacting micromolecular and water-solub...
This research determined the adsorption performance of Florisil® impregnated with trihexyl(tetradecyl)phosphonium chloride (Cyphos IL-101) in the process of Cs+ removal from aqueous solutions. The obtained Florisil® impregnated with the studied ionic...
Wood is a porous material that can be impregnated and have enhanced properties. Two species of hardwood, red oak (Quercus rubra L.) and sugar maple (Acer saccharum Marsh.), were impregnated in a reactor with a microencapsulated phase change material....
In order to improve the adsorption capability of solvent-impregnated resins (SIRs) for vanadium(IV) (V(IV)), the dual extractant (D2EHPA (Di-(2-ethylhexyl) phosphoric acid) and TBP (Tributyl phosphate)) impregnated resins (D-TIRs) were prepared by im...
The paper presents the results of tests on concrete with recycled aggregate impregnated with the use of citric acid. Impregnation was carried out in two stages, with a suspension of calcium hydroxide in water (so-called milk of lime) or diluted water...
Mesoporous materials with high surface area, large pore volume, and adjustable pore size are promising in the fields of adsorption and heterogeneous catalysis. In this work, ordered mesoporous ceria structures were successfully prepared via nanocasti...
This work aims to investigate the influence of temperature and chemical impregnation in the textural and morphological composition of the bio-adsorbent of bio-adsorption via thermal cracking of the seeds of açaí. The experiments were ca...
We studied different face velocity and carbon dioxide (CO2) initial concentration to examine the adsorption behavior of calcium oxide (CaO) impregnated activated carbon (AC) filter and also to discuss pseudo-first-order, pseudo-second-order and intra...
Mesoporous alumina has been successfully prepared using sucrose as templates. Mesoporous alumina-based catalysts, neat and impregnated with metal chlorides, were tested for gas phase methyl chloride synthesis from methanol and HCl. The catalysts were...
Recently, the surfaces of concrete structures are impregnated to protect them against the environment in order to increase their durability. It is still not known how the use of these agents affects the near-surface hardness of concrete. This is espe...
Photocatalyzed degradation of phenol in aqueous solution over surface impregnated TiO2 (M = Cu, Cr, V) under UV-Vis (366 nm) and UV (254 nm) irradiation is described. Nanosized photocatalyts were prepared from TiO2-P25 by wet impregnation, and charac...
Carbon textile reinforced concrete (CTRC) has been investigated in terms of its elevated temperature and fire behavior in order to evaluate the influence of impregnation materials. Elevated temperature tests have already been carried out for material...
Graphite-based composites are well recognized as ideal functional materials in mechanical seals, bearings of canned pumps, and electrical contact systems because of their outstanding self-lubricating ability, thermostability, and chemical stability....
In this work, non-ordered and ordered CeO2-based catalysts are proposed for CO2 conversion to dimethyl carbonate (DMC). Particularly, non-ordered mesoporous CeO2, consisting of small nanoparticles of about 8 nm, is compared with two highly porous (63...
The impregnation of elements made of wood is one of the most important stages of their maintenance and the modification of their parameters. Incorrectly prepared material is sensitive to moisture, fungi, algae or weather conditions. In the case of la...
The objective of the present work was to develop a bioactive transdermal patch functionalized with Annona leaf extracts (ALE) by means of supercritical impregnation technique. The potential of six different Annona leaf extracts (ALE) obtained with th...
The resistivity of oil impregnated paper will decrease during its aging process. This paper takes paper resistivity as an assessment index to evaluate the insulation condition of oil impregnated paper in power transformer. The feasibility of this met...
The use of recycled waste has been the focus of several studies due to its potential to allow a more sustainable use of construction materials and minimize improper waste disposal in landfills or incinerators. More specifically, garment textile waste...
The aim of this research was to examine the effect of water-based hydrophobic impregnations on concrete in order to improve its durability, chemical resistance, and physical–mechanical parameters. The purpose of this research was to prevent as...
Trialkylamine (N235)-tributyl phosphate (TBP) impregnated resins (N-TIRs) were prepared, so as to evaluate the effects of the addition of TBP on the preparation and adsorption performance of N235-impregnated resins (NIRs). The results show that TBP c...
Ag–CeO2 catalysts (20 mol % Ag) were synthesized using different techniques (co-precipitation, impregnation, and impregnation of pre-reduced ceria), characterized by XRD, N2 sorption, TEM, H2-TPR methods, and probed in room-temperature p-nitrop...
The preparation of activated carbons (ACs) from cherry stones and chemical activation with H3PO4 can be controlled by the experimental variables during the impregnation step in order to obtain a tailored porous structure of the as-prepared ACs. This...
Green diesel is a high-quality biofuel obtained through the transformation of triglycerides into linear alkanes. In order to obtain green diesel, this study investigates the impact of impregnation pH on the surface species of NiMo/Al2O3 catalysts in...
Lubricant (or oil)-impregnated porous surface has been considered as a promising surface treatment to realize multifunctionality. In this study, silicone oil was impregnated into a hard porous oxide layer created by the plasma electrolytic oxidation...
Anhydrosugars, such as levoglucosan (LG), are high value-added chemicals which are mainly derived from fast pyrolysis of pure cellulose. However, fast pyrolysis of raw lignocellulosic biomass usually produces a very low amount of levoglucosan, since...
The modification of wood and its treatment with various preservatives may affect its mechanical properties, hence the knowledge of the character changes in wood caused by impregnation is of great importance. Therefore, the aim of the research was to...
The purposes of this study are to investigate the effect of metal (Co and Mo) impregnation to ZSM-5 catalysts on the Brønsted to Lewis (B/L) ratio as the active sites of cracking reaction, and the catalysts’ performance testing for palm oil cracking...
The effect of the sodium addition mode was investigated on model Cu/FER selective catalytic reduction (SCR) catalysts with two copper loadings (2.8 wt. % and 6.1 wt. %) in order to compare samples with or without over-exchanged copper. Na was added b...
Hexagonal SBA-15 mesoporous material was used as a catalytic template for impregnation, with the transition metals Fe, Co, and Ni as catalysts for chemical transformation. Nitrogen adsorption/desorption isotherms, scanning electron microscopy, and tr...
The removal of benzene, toluene and p-xylene (BTX) from water is necessary to avoid various health and environmental concerns. Among various techniques, adsorption is suitable and widely used for the removal of BTX from water. In this study, the adso...
Nature provides various templates for integrating organic and inorganic materials to create high-performance composites. Biological structures such as nacre and the structural elements of the glass sponge are built up in layers, leading to remarkable...
The influence of polymer infiltration on the flexural strength and toughness of β-tricalcium phosphate (β-TCP) scaffolds fabricated by robocasting (direct-write assembly) is analyzed. Porous structures consisting of a tetragonal three-dimensional lat...
The main goal of this study is to investigate the doping effects of carbon nanotubes (CNTs) and graphene on the needle-punched carbon/carbon (C/C) composites that are prepared by liquid-phase impregnation. In order to achieve, for the C/C composites,...
In this paper, a resin with high adhesion, easy curing, good flexibility, and high temperature resistance was prepared from polyimide fiber paper. First, in order to improve the toughness and curability of impregnating resin, epoxy resin was modified...
Although progress is evident in the effective treatment of joint replacement-related infections, it still remains a serious issue in orthopedics. As an example, the local application of antibiotics-impregnated bone grafts supplies the high drug level...
The main objective of this work was to study the release of cinnamaldehyde (CIN) from electrospun poly lactic acid (e-PLA) mats obtained through two techniques: (i) direct incorporation of active compound during the electrospinning process (e-PLA-CIN...
Impregnated activated carbons (IACs) used in air filtration gradually lose their efficacy for the chemisorption of noxious gases when exposed to humidity due to impregnated metal deactivation. In order to stabilize IACs against aging, and to prolong...
In this study, a series of pretreatments, including ice-glazing, polyphosphate impregnated, and both ice-glazing and polyphosphate impregnated, were employed to pretreat shucked oysters in order to explore the optimal processing conditions for long-t...
TiO2/SBA-15 photocatalysts were successfully prepared by impregnating low loading titania to SBA-15 via slow calcination. The photocatalyst is efficient for fast methylene blue removal via adsorption and photodegradation methods. The impregnation of...
Photocatalytic hydrogen production through ethanol photo-reforming using Na2Ti3O7 whiskers increases if the sodium titanate is decorated with well-known metallic catalysts such as Ni and Pt. Whereas wet impregnation with nickel gives only a slight in...
The aim of this work is to make a brief review of the adsorption of CO2 on modified clay minerals. Previous researchers have used different clay modifications, either by making changes in the structure by a reaction with another product or by the add...
The application of fast-growing Chinese fir (Cunninghamia lanceolata) is limited due to low dimensional stability and weak mechanical strength. Silica sol can effectively improve fast-growing fir wood’s physical and mechanical properties. In or...
Biochar synthesis is a complex process influenced by multiple factors and requiring an efficient optimization approach to maximize the yield and its physico-chemical properties. This study employs Response Surface Methodology (RSM) as a valuable tool...
Mesoporous titanium dioxide materials were prepared using a nanocasting technique involving silica SBA-15 as the hard-template. At an optimal loading of titanium precursor, the hexagonal periodic array of pores in SBA-15 was retained. The phases of t...
A series of novel polysaccharide-based biocomposites was obtained by impregnation of bacterial cellulose produced by Komagataeibacter rhaeticus (BC) with the solutions of negatively charged polysaccharides—hyaluronan (HA), sodium alginate (ALG)...
The characteristics of arsenic adsorption onto Fe-XAD8-DEHPA resin were studied on the laboratory scale using aqueous solutions and natural underground waters. Amberlite XAD8 resin was impregnated with di(2-ethylhexyl) phosphoric acid (DEHPA) via the...
of 11