Skip to Content

8,442 Results Found

  • Article
  • Open Access
17 Citations
3,420 Views
13 Pages

1 September 2023

Non-destructive ultrasonic testing can be used to assess the properties and condition of real machine elements during their operation, with limited (one-sided) access to these elements. A methodological question then arises concerning the influence o...

(This article belongs to the Special Issue Advance of Structural Health Monitoring in Civil Engineering)
  • Article
  • Open Access
5 Citations
5,226 Views
10 Pages

10 October 2021

The present paper deals with the hardness of cement mortars prepared with recycled materials that are potential supplementary cementitious materials (SCM). Two potential SCMs (aerated concrete powder (ACP) and concrete powder) were investigated and c...

  • Proceeding Paper
  • Open Access
7 Citations
3,566 Views
7 Pages

Hardness Safety Testing of Artificial Turf

  • Paul Fleming,
  • Charlie Watts,
  • Jon Gunn and
  • Steph Forrester

This paper compares four sport surface hardness impact test devices, for use on artificial turf (AT) surfaces to control safety. Sports governing bodies require sport surfaces to be assessed with the “Advanced Artificial Athlete” (AAA) mechanical tes...

(This article belongs to the Proceedings of The 13th Conference of the International Sports Engineering Association)
  • Article
  • Open Access
40 Citations
9,572 Views
16 Pages

On the Application of Vickers Micro Hardness Testing to Isotactic Polypropylene

  • Hao Wu,
  • Foram Dave,
  • Mozaffar Mokhtari,
  • Muhammad Mahmood Ali and ,
  • Richard Sherlock,
  • Alistair McIlhagger,
  • David Tormey and
  • Shaun McFadden
  • + 3 authors+ 0 author

28 April 2022

Hardness is a useful measure of a material’s resistance to permanent indentation; but for viscoelastic polymers, hardness data are highly dependent on the test type and the parameter set chosen. Vickers microhardness testing is used to leave sm...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Article
  • Open Access
3 Citations
2,258 Views
22 Pages

Analysis of Filler Metals Influence on Quality of Hard-Faced Surfaces of Gears Based on Tests in Experimental and Operating Conditions

  • Svetislav Marković,
  • Vukić Lazić,
  • Dušan Arsić,
  • Ružica R. Nikolić and ,
  • Djordje Ivković,
  • Robert Ulewicz and
  • Otakar Bokuvka
  • + 2 authors+ 0 author

4 November 2022

Hard-facing as a type of the coating depositing is increasingly used today. Physical-chemical-metallurgical characteristics of contact layers in tribo-mechanical systems depend on the operating conditions and the conditions under which the work surfa...

(This article belongs to the Special Issue Quality, Microstructure and Properties of Metal Alloys)
  • Proceeding Paper
  • Open Access
1 Citations
2,350 Views
6 Pages

In order to assess the integrity of welded structures, it is important to accurately know the material characteristics of the weld regions. A weldment is heterogeneous i.e., strength properties vary at different locations within the weld. This influe...

(This article belongs to the Proceedings of The 18th International Conference on Experimental Mechanics)
  • Feature Paper
  • Article
  • Open Access
38 Citations
7,196 Views
15 Pages

Vickers Hardness Value Test via Multi-Task Learning Convolutional Neural Networks and Image Augmentation

  • Wan-Shu Cheng,
  • Guan-Ying Chen,
  • Xin-Yen Shih,
  • Mahmoud Elsisi and ,
  • Meng-Hsiu Tsai and
  • Hong-Jie Dai
  • + 1 author+ 0 author

25 October 2022

Hardness testing is an essential test in the metal manufacturing industry, and Vickers hardness is one of the most widely used hardness measurements today. The computer-assisted Vickers hardness test requires manually generating indentations for meas...

(This article belongs to the Special Issue Advances in Artificial Intelligence (AI)-Driven Data Analytics)
  • Article
  • Open Access
16 Citations
3,309 Views
20 Pages

19 March 2022

Tunnels, where they pass through soft-hard strata, are severely damaged during earthquakes. These issues have not yet been well understood. In this study, the seismic performances of a tunnel passing through soft-hard stratum with a transition tunnel...

(This article belongs to the Special Issue Tunneling and Underground Engineering: From Theories to Practices)
  • Article
  • Open Access
7 Citations
3,506 Views
19 Pages

20 March 2025

This study investigated the mechanical properties of concrete specimens produced with a limestone aggregate through laboratory testing. Destructive tests, specifically concrete compressive strength and splitting tensile strength tests, were conducted...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
6 Citations
1,535 Views
20 Pages

Quantitative Prediction of Residual Stress, Surface Hardness, and Case Depth in Medium Carbon Steel Plate Based on Multifunctional Magnetic Testing Techniques

  • Changjie Xu,
  • Xianxian Wang,
  • Haijiang Dong,
  • Juanjuan Li and ,
  • Liting Wang,
  • Xiucheng Liu and
  • Cunfu He
  • + 2 authors+ 0 author

29 April 2025

In this study, the methods of tangential magnetic field (TMF), magnetic Barkhausen noise (MBN), and incremental permeability (IP) were employed for in the simultaneous, quantitative prediction of target properties (bidirectional residual stress, surf...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
173 Views
29 Pages

Factors Controlling Cuttability of Pre-Fractured Hard Rock: Insights from Conical-Pick Indentation Tests

  • Qiang Li,
  • Jinghong Yan,
  • Yichao Zhao,
  • Weihao Huang and ,
  • Yuxin Kang,
  • Jingdao Fan,
  • Hao Dai and
  • Dan Ma
  • + 3 authors+ 0 author

3 November 2026

Pre-fracturing is a promising approach for improving rock-breaking efficiency, reducing cutting resistance, and mitigating mechanical wear in the mechanical excavation of hard rock. However, the cuttability of hard rock under the combined effects of...

(This article belongs to the Section Earth Sciences)
  • Article
  • Open Access
599 Views
20 Pages

1 June 2026

The features of non-destructive testing of steel pipes with a long service life in terms of dynamic hardness parameters are considered. Regarding the limited applicability of normal and lognormal distributions, the Weibull and Gumbel distributions ar...

(This article belongs to the Section Materials Engineering)
  • Article
  • Open Access
5 Citations
3,775 Views
14 Pages

Adapted Schmidt Hardness Testing on Large Rock Samples—Kanfanar-South Quarry Case Study

  • Zlatko Briševac,
  • Kristian Kosović,
  • Dražen Navratil and
  • Tomislav Korman

21 January 2023

This paper deals with the possibility of using the Schmidt hardness test, which does not require much preliminary preparation and is easy to perform, in the production of commercial blocks in a quarry. Previous recommendations for Schmidt hardness te...

  • Article
  • Open Access
1 Citations
1,112 Views
19 Pages

27 February 2026

The shear strength of rock discontinuities is critical for the stability of deep underground projects. However, its accurate determination is hindered by the discreteness of natural joints and the limitations of conventional direct shear tests, which...

(This article belongs to the Special Issue Reservoir Stimulation in Deep Geothermal Reservoir)
  • Article
  • Open Access
39 Citations
5,011 Views
11 Pages

26 November 2021

Nanoindentation testing using a Berkovich indenter was conducted to explore the relationships among indentation hardness (H), elastic work energy (We), plastic work energy (Wp), and total energy (Wt = We + Wp) for deformation among a wide range of pu...

(This article belongs to the Topic Metallurgical and Materials Engineering)
  • Article
  • Open Access
1,744 Views
14 Pages

A Defined-Area Bonding Approach for Microtensile Testing: A Reliable Alternative to Monoblock Sectioning for High-Hardness Restorative Materials

  • Koji Yamashita,
  • Chiharu Kawamoto,
  • Yu Toida,
  • Shimpei Kawano and ,
  • Shuhei Hoshika,
  • Hidehiko Sano and
  • Atsushi Tomokiyo
  • + 2 authors+ 0 author

Background: The microtensile bond strength (μTBS) test is the gold standard for evaluating adhesive performance in restorative dentistry. However, the conventional non-trimming technique—referred to in this study as the monoblock sectioning...

(This article belongs to the Special Issue Biomaterials for Dental Reparative and Regenerative Therapies)
  • Article
  • Open Access
7 Citations
1,441 Views
14 Pages

The Moisture Effect on Ultrasonic, Rebound Hardness and Drilling Resistance Data in Non-Destructive Testing of Concrete

  • Uldis Lencis,
  • Rauls Klaucans,
  • Aigars Udris,
  • Aleksandrs Korjakins and ,
  • Xiangming Zhou and
  • Girts Bumanis
  • + 1 author+ 0 author

11 November 2025

As the volume of reinforced concrete structures continues to grow, it is important to determine the quality of concrete in the shortest time possible. Therefore, the development and validation of methods for non-destructive testing (NDT) of concrete...

(This article belongs to the Special Issue Advances in Structural Health Monitoring in Civil Engineering)
  • Article
  • Open Access
3 Citations
2,480 Views
13 Pages

Comparative Micro-Scale Abrasive Wear Testing of Thermally Sprayed and Hard Chromium Coatings

  • Georgiana Chișiu,
  • Roxana-Alexandra Gheța,
  • Alina-Maria Stoica and
  • Nicolae-Alexandru Stoica

Nowadays, due to the carcinogenic effects of chrome, replacing the hard chromium used for hydraulic components like rods and cylinders is becoming increasingly requested. Thermally sprayed coatings are a solution to the problem; however, proper under...

(This article belongs to the Special Issue Friction and Wear of Alloys)
  • Article
  • Open Access
6 Citations
3,689 Views
11 Pages

17 November 2021

This article is devoted to contemporary topics of ensuring the uniformity of Leeb hardness measurements. The analysis of the physical principles of the Leeb hardness test is carried out, and the influence of the measuring transducer parameters on the...

(This article belongs to the Section Inventions and Innovation in Surface Science and Nanotechnology)
  • Article
  • Open Access
9 Citations
5,701 Views
10 Pages

Modification of the Leeb Impact Device for Measuring Hardness by the Dynamic Instrumented Indentation Method

  • Aleksander Umanskii,
  • Kirill Gogolinskii,
  • Vladimir Syasko and
  • Artem Golev

28 February 2022

The article is devoted to modification of the impact devices of Leeb hardness testers for the implementation of the dynamic instrumented indentation method. The results obtained made it possible to construct a load–displacement curve using primary EM...

(This article belongs to the Section Inventions and Innovation in Surface Science and Nanotechnology)
  • Article
  • Open Access
4 Citations
2,247 Views
27 Pages

A Novel Approach to Rockwell and Scratch Adhesion Tests for Hard Coatings Deposited onto Ti6Al4V Substrates

  • Emanuele Ghio,
  • Maria Francesca Bonilauri,
  • Giovanni Bolelli,
  • Paolo Colombi and
  • Emanuela Cerri

8 September 2025

The paper aims to investigate the failure modes induced by the Rockwell indentation test on Diamond-Like Carbon (DLC)-based and AlCrN coatings deposited on rolled and additively manufactured Ti6Al4V substrates with different surface finishes and subj...

(This article belongs to the Special Issue Additive Manufacturing and Characterization of Metallic Alloys and Composites)
  • Article
  • Open Access
6 Citations
3,750 Views
14 Pages

21 February 2024

The aim of this study was to evaluate the effect of cetylpyridinium chloride (CPC) addition on the antibacterial and surface hardness characteristics of two commercial resin-based dental composites (RBDCs). A total of two hundred and seventy (n = 270...

(This article belongs to the Special Issue Overviews on the Progress of Polymeric Materials for Dental Applications II)
  • Article
  • Open Access
50 Citations
6,415 Views
17 Pages

Influence of Build Orientation, Heat Treatment, and Laser Power on the Hardness of Ti6Al4V Manufactured Using the DMLS Process

  • Anna Guzanová,
  • Gabriela Ižaríková,
  • Janette Brezinová,
  • Jozef Živčák and ,
  • Dagmar Draganovská and
  • Radovan Hudák
  • + 1 author+ 0 author

18 August 2017

This contribution is focused on the influence of build orientation on hardness of materials sintered using direct metal laser sintering (DMLS) technology. It builds on the current research works that has monitored the influence of build orientation o...

  • Article
  • Open Access
13 Citations
4,395 Views
20 Pages

Comparative Evaluation of the Tribological Properties of Polymer Materials with Similar Shore Hardness Working in Metal–Polymer Friction Systems

  • Daniel Pieniak,
  • Radosław Jedut,
  • Leszek Gil,
  • Włodzimierz Kupicz and ,
  • Anna Borucka,
  • Jarosław Selech,
  • Grzegorz Bartnik,
  • Krzysztof Przystupa and
  • Zbigniew Krzysiak
  • + 4 authors+ 0 author

6 January 2023

This article presents comparative tests of contact strength and tribological wear resistance of polymer sliding materials of the polyamide group. The aim of this work was to study Shore hardness, indentation hardness, modulus, creep, relaxation, Mart...

(This article belongs to the Special Issue Research about Friction and Wear Modeling for Materials)
  • Article
  • Open Access
22 Citations
5,342 Views
10 Pages

19 April 2019

Based on electromagnetic theory, metallurgical characteristics can be detected by eddy current nondestructive testing technology. In this study, the relationship between the surface microstructure and the eddy current output of martensitic stainless...

  • Article
  • Open Access
7 Citations
2,569 Views
11 Pages

20 October 2022

This study aims to clarify the relationship between surface hardness and the peak interfacial frictional coefficient under different particle sizes. The relationship between particle size and the peak interfacial frictional coefficient with different...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
7 Citations
3,110 Views
21 Pages

The use of computer simulation to imitate physical processes has proven to be a time-efficient and cost-effective way of performing scenario testing for process optimisation in different applications. The finite element analysis (FEA) is the dominant...

(This article belongs to the Special Issue Deformation and Mechanical Behavior of Metals and Alloys)
  • Article
  • Open Access
28 Citations
3,999 Views
19 Pages

Comparative Evaluation of TiO2 Nanoparticle Addition and Postcuring Time on the Flexural Properties and Hardness of Additively Fabricated Denture Base Resins

  • Maram A. AlGhamdi,
  • Shaimaa M. Fouda,
  • Noha Taymour,
  • Sultan Akhtar and ,
  • Soban Q. Khan,
  • Mohamed S. Ali,
  • Ahmed M. Elakel,
  • Essam A. Nassar and
  • Mohammed M. Gad
  • + 4 authors+ 0 author

30 November 2023

Three-dimensionally (3D)-printed fabricated denture bases have shown inferior strength to conventional and subtractively fabricated ones. Several factors could significantly improve the strength of 3D-printed denture base resin, including the additio...

(This article belongs to the Special Issue Functional Nanocomposites: From Strategic Design to Applications)
  • Article
  • Open Access
77 Citations
10,860 Views
19 Pages

Analysis of the Mechanical Properties of 3D-Printed Plastic Samples Subjected to Selected Degradation Effects

  • Josef Sedlak,
  • Zdenek Joska,
  • Jiri Jansky,
  • Jan Zouhar and ,
  • Stepan Kolomy,
  • Martin Slany,
  • Adam Svasta and
  • Jan Jirousek
  • + 3 authors+ 0 author

21 April 2023

The Fused Filament Fabrication (FFF) method is an additive technology that is used for the creation of prototypes within Rapid Prototyping (RP) as well as for the creation of final components in piece or small-series production. The possibility of us...

  • Article
  • Open Access
27 Citations
5,692 Views
17 Pages

28 May 2021

In this work, the experimental method and the calculation model for the determination of indentation moduli, indentation work, and indentation creep of metallic materials, by means of macroscale-level forces provided by a primary hardness standard ma...

(This article belongs to the Special Issue Instrumented Indentation Test: An Aiding Tool for Materials Science and Industry)
  • Article
  • Open Access
50 Citations
8,931 Views
12 Pages

Advantages of the Application of the Temper Bead Welding Technique During Wet Welding

  • Jacek Tomków,
  • Grzegorz Rogalski,
  • Dariusz Fydrych and
  • Jerzy Łabanowski

19 March 2019

Thermo-mechanically rolled S460ML steel was chosen for welding in underwater wet welding conditions by covered electrodes. The main aim of this study was to check the weldability for fillet welds in a water environment by controlled thermal severity...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Metals and Alloys)
  • Article
  • Open Access
2 Citations
1,556 Views
24 Pages

22 December 2025

The study analysed epoxy–glass laminates containing carbonisate produced during medium-density fibreboard (MDF) waste pyrolysis were evaluated with respect to their hardness and their ability to withstand impact loads. All composite samples wer...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
16 Citations
4,233 Views
10 Pages

Martens Hardness of CAD/CAM Resin-Based Composites

  • Martin Rosentritt,
  • Sebastian Hahnel,
  • Sibylle Schneider-Feyrer,
  • Thomas Strasser and
  • Alois Schmid

30 July 2022

(1) Background: The properties of CAD/CAM resin-based composites differ due to differences in their composition. Instrumented indentation testing can help to analyze these differences with respect to hardness, as well as energy-converting capabilitie...

(This article belongs to the Special Issue Celebrating Applied Sciences Reaches 20,000 Articles Milestone: Invited Papers in "Applied Dentistry and Oral Sciences" Section)
  • Article
  • Open Access
721 Views
27 Pages

27 February 2026

A major quality challenge in the application of titanium alloys is the persistence of substances known as “hard-alpha inclusions”. Although hard-alpha inclusions are extremely rare and typically small in size in high-quality titanium allo...

(This article belongs to the Special Issue Advancements in Ultrasonic Testing for Metallurgical Materials)
  • Article
  • Open Access
22 Citations
5,754 Views
15 Pages

The significance of non-destructive testing (NDT) methods cannot be overstated as they help to evaluate the properties of a material without damaging/fracturing it. However, their applicability is dependent on their ability to provide reliable correl...

(This article belongs to the Special Issue Graphene Composites)
  • Article
  • Open Access
2 Citations
2,424 Views
22 Pages

Predictive Correlation Between Hardness and Tensile Properties of Submerged Arc Welded API X70 Steel

  • Ali Lahouel,
  • Sameh Athmani,
  • Amel Sedik,
  • Adel Saoudi and ,
  • Regis Barille,
  • Lotfi Khezami,
  • Ahlem Guesmi and
  • Mamoun Fellah
  • + 3 authors+ 0 author

25 September 2025

This research investigates the statistical correlation between Vickers hardness and tensile properties of helical submerged arc welded high-strength low-alloy (HSLA) API X70 pipeline steel. Tensile tests were performed on cross-weld joints from 138 p...

(This article belongs to the Special Issue Advanced Welding Process Development for Metals and Steels: Numerical Analysis, Process Optimization, and Joint Performance)
  • Article
  • Open Access
5 Citations
4,368 Views
18 Pages

Study of Bag Grouting Pile Reinforcing Deep Soft-Soil Foundation with an Interlayer of Hard Materials on High-Speed Railway Ballast Track

  • Shen Zuo,
  • Qingyu Zhang,
  • Jin Li,
  • Peng Liu and ,
  • Fengkun Cui and
  • Ying Chen
  • + 1 author+ 0 author

6 May 2022

High-speed railways are built in deep soft-soil foundations interlayered with hard materials. However, the hard layers cannot be penetrated by conventional foundation treatment. Moreover, the project cost is sometimes prohibitive, which is an issue f...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
9 Citations
4,325 Views
11 Pages

15 September 2017

Cobalt-phosphorus (Co-P) alloy is a promising material for the replacement of traditional hard chromium alloy of high hardness. In this paper, the cobalt-phosphorus alloy layer with high phosphorus content was formed by electrodeposition in a cobalt...

  • Article
  • Open Access
1 Citations
1,602 Views
23 Pages

8 August 2025

The aim of this study was to evaluate the feasibility of estimating the tensile strength of Ti6Al4V alloy, based on HV measurements. The investigation included samples that were manufactured using both additive technology and conventional methods, un...

(This article belongs to the Special Issue Additive Manufacturing of Metals and Alloys: Microstructure and Mechanical Properties)
  • Article
  • Open Access
10 Citations
2,543 Views
13 Pages

The greatest losses during gas transportation occur in the elements of shut-off valves, the operating parameters of which, among other things, depend on the thickness and hardness of the protective coating of the ball plugs. The study of the paramete...

(This article belongs to the Section Inventions and Innovation in Biotechnology and Materials)
  • Proceeding Paper
  • Open Access
1 Citations
923 Views
9 Pages

Mechanical Characterization of PETG/TPU Multi-Material 3D-Printed Samples and Fabrication of a Test Part

  • Mihail Zagorski,
  • Radoslav Miltchev,
  • Todor Gavrilov and
  • Martina Nikolova

The present article aims to explore the feasibility of manufacturing multi-material components from PETG and TPU using FFF/FDM 3D printing. The mechanical characterization includes Shore hardness measurements of the individual materials and Izod impa...

(This article belongs to the Proceedings of The 15th International Scientific Conference TechSys 2026—Engineering, Technologies and Systems)
  • Article
  • Open Access
78 Citations
9,003 Views
14 Pages

23 July 2015

(Al0.34Cr0.22Nb0.11Si0.11Ti0.22)50N50 high-entropy nitride coatings prepared by reactive magnetron sputtering have been proved to have high hardness and superior oxidation resistance. Their thermal stability, adhesion strength, and cutting performanc...

(This article belongs to the Special Issue High Entropy Alloy Coatings)
  • Article
  • Open Access
25 Citations
5,992 Views
20 Pages

30 July 2021

The European steel industry produces about 70 million tons/year of steel by the electric arc furnace (EAF). The slag consists of about 15% by weight of the produced steel, thus from the perspective of the circular economy, it has a high potential as...

(This article belongs to the Special Issue Valorization of Metallurgical and Mining Residues and Wastes)
  • Article
  • Open Access
31 Citations
7,385 Views
18 Pages

26 November 2019

Self-compacting concrete (SCC) shows to have some specificities when compared to normal vibrated concrete (NVC), namely higher cement paste dosage and smaller volume of coarse aggregates. In addition, the maximum size of coarse aggregates is also red...

(This article belongs to the Special Issue Architectural Structure)
  • Article
  • Open Access
27 Citations
5,427 Views
18 Pages

1 September 2018

When the hard and thick key strata are located above the working face, the bed separation structure is easy to be formed after mining because of the high strength and integrity of the hard and thick key strata and the initial breaking step is large....

(This article belongs to the Special Issue Fluid Flow in Fractured Porous Media)
  • Article
  • Open Access
40 Citations
6,303 Views
20 Pages

30 December 2021

Pine wilt is a devastating disease that typically kills affected pine trees within a few months. In this paper, we confront the problem of detecting pine wilt disease. In the image samples that have been used for pine wilt disease detection, there is...

(This article belongs to the Special Issue Artificial Intelligence-Based Learning Approaches for Remote Sensing)
  • Article
  • Open Access
7 Citations
2,735 Views
23 Pages

An FBG-Based Hard Landing Monitoring System: Assessment for Drops on Different Soils

  • Angela Brindisi,
  • Cristian Vendittozzi,
  • Lidia Travascio,
  • Marika Belardo and ,
  • Michele Ignarra,
  • Vincenzo Fiorillo and
  • Antonio Concilio
  • + 2 authors+ 0 author

26 February 2025

This study aims to develop an integrated monitoring system using a fiber Bragg grating sensor network to record the structural response of a landing gear system under operational loads to detect hard landing conditions on soils with different absorbi...

(This article belongs to the Special Issue Editorial Board Members’ Collection Series: Photonics Sensors)
  • Article
  • Open Access
4 Citations
3,285 Views
14 Pages

19 February 2018

Methods dealing with the problem of Joint Tracking and Classification (JTC) are abundant, among which Simultaneous Tracking and Classification (STC) provides a modularized scheme solving tracking and classification subproblems simultaneously. However...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
17 Citations
2,269 Views
30 Pages

Structure and Texture Synergies in Fused Deposition Modeling (FDM) Polymers: A Comparative Evaluation of Tribological and Mechanical Properties

  • Patricia Isabela Brăileanu,
  • Marius-Teodor Mocanu,
  • Tiberiu Gabriel Dobrescu,
  • Nicoleta Elisabeta Pascu and
  • Dan Dobrotă

7 August 2025

This study investigates the interplay between infill structure and surface texture in Fused Deposition Modeling (FDM)-printed polymer specimens and their combined influence on tribological and mechanical performance. Unlike previous works that focus...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Article
  • Open Access
18 Citations
2,659 Views
22 Pages

Study on Dynamic Disaster Mechanisms of Thick Hard Roof Induced by Hydraulic Fracturing in Surface Vertical Well

  • Xiaoguang Shang,
  • Sitao Zhu,
  • Fuxing Jiang,
  • Jinhai Liu and ,
  • Jiajie Li,
  • Michael Hitch,
  • Hongliang Liu,
  • Shibin Tang and
  • Chun Zhu
  • + 4 authors+ 0 author

29 November 2022

With the increase in mining depth and the deterioration of mining conditions, thick and hard overburden movement frequently induces mine earthquakes and rock bursts. Some mines are expected to prevent and control super thick hard rock mine earthquake...

(This article belongs to the Topic Complex Rock Mechanics Problems and Solutions)

of 169