Skip to Content

122 Results Found

  • Article
  • Open Access
3 Citations
3,925 Views
13 Pages

Fabrication and Characterization of Ti/TiC Composite Layers by an Electron-Beam Surface Modification

  • Stefan Valkov,
  • Daniela Nedeva,
  • Vladimir Dunchev,
  • Fatme Padikova and ,
  • Maria Ormanova,
  • Borislav Stoyanov and
  • Nikolay Nedyalkov
  • + 2 authors+ 0 author

In this study, the possibilities for modification and improvement of the surface structure and properties of titanium substrates by a formation of composite Ti/TiC layers are presented. The layers were fabricated by a two-step electron-beam surface m...

(This article belongs to the Special Issue Surface Modification for Improving the Performance of Engineering Components)
  • Article
  • Open Access
12 Citations
4,374 Views
13 Pages

Duplex Surface Modification of 304-L SS Substrates by an Electron-Beam Treatment and Subsequent Deposition of Diamond-like Carbon Coatings

  • Stanislava Rabadzhiyska,
  • Georgi Kotlarski,
  • Maria Shipochka,
  • Peter Rafailov and ,
  • Maria Ormanova,
  • Velichka Strijkova,
  • Nina Dimcheva and
  • Stefan Valkov
  • + 3 authors+ 0 author

18 March 2022

In this study, we present the results of the effect of duplex surface modification of 304-L stainless steel substrates by an electron-beam treatment (EBT) and subsequent deposition of diamond-like carbon coatings on the surface roughness and corrosio...

(This article belongs to the Section Bioactive Coatings and Biointerfaces)
  • Article
  • Open Access
14 Citations
3,041 Views
14 Pages

Preparation and Electron-Beam Surface Modification of Novel TiNi Material for Medical Applications

  • Sergey G. Anikeev,
  • Anastasiia V. Shabalina,
  • Sergei A. Kulinich,
  • Nadezhda V. Artyukhova and ,
  • Daria R. Korsakova,
  • Evgeny V. Yakovlev,
  • Vitaly A. Vlasov,
  • Oleg V. Kokorev and
  • Valentina N. Hodorenko
  • + 4 authors+ 0 author

12 May 2021

A new approach to fabricate TiNi surfaces combining the advantages of both monolithic and porous materials for implants is used in this work. New materials were obtained by depositing a porous TiNi powder onto monolithic TiNi plates followed by sinte...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
6 Citations
3,341 Views
12 Pages

Effect of Electron Beam Surface Modification on the Plasticity of Inconel Alloy 625

  • Stefan Valkov,
  • Georgi Kotlarski,
  • Stoyan Parshorov,
  • Maria Ormanova and ,
  • Borislav Stoyanov,
  • Fatme Padikova and
  • Ivan Parshorov
  • + 2 authors+ 0 author

22 February 2024

In the present work, we present results on the influence of electron beam surface modification on the resistance to plastic deformation and plasticity of Inconel alloy 625. During the treatment procedure, the electron beam currents were 10 and 20 mA,...

(This article belongs to the Special Issue Mechanical Properties and Tribological Behavior of Alloy/Coatings)
  • Article
  • Open Access
4 Citations
2,343 Views
14 Pages

26 July 2023

This paper aims to investigate the impact of beam deflection geometry on the structure, surface architecture, and friction coefficient of electron-beam-modified TC4 titanium alloys. During the experiments, the electron beam was deflected in the form...

(This article belongs to the Special Issue Size-Dependent Effects in Materials for Environmental Protection and Energy Application)
  • Article
  • Open Access
645 Views
17 Pages

Microstructural and Mechanical Properties of Titanium Boride Coatings Fabricated by an Electron Beam Surface Modification

  • Fatme Padikova,
  • Ivana Ilievska,
  • Lyubomira Veleva,
  • Tatyana Koutzarova and ,
  • Georgi Kotlarski,
  • Nikolay Nedyalkov,
  • Maria Ormanova,
  • Vladimir Dunchev,
  • Borislav Stoyanov and
  • Stefan Valkov
  • + 5 authors+ 0 author

The development of titanium-based surface alloys and coatings that combine extreme hardness with sufficient toughness remains a major challenge for components operating under severe friction and wear conditions. In this work, titanium–boride co...

  • Article
  • Open Access
4 Citations
2,506 Views
14 Pages

Duplex Surface Modification of M2 High-Speed Steel

  • Maria Ormanova,
  • Georgi Kotlarski,
  • Dimitar Dechev,
  • Nikolay Ivanov and ,
  • Borislav Stoyanov and
  • Stefan Valkov
  • + 1 author+ 0 author

26 June 2024

In this investigation, a duplex surface modification of M2 high-speed steel (HSS) was demonstrated, including electron beam treatment (EBT) followed by a tungsten nitride (WN) coating deposition. The influence of the EBT of the substrate on the funct...

(This article belongs to the Special Issue Surface Modification of Magnesium, Aluminum Alloys, and Steel)
  • Article
  • Open Access
2 Citations
2,444 Views
19 Pages

Surface Modification of Diatomite-Based Micro-Arc Coatings for Magnesium Implants Using a Low-Energy High-Current Electron Beam Processing Technique

  • Mariya B. Sedelnikova,
  • Alexander D. Kashin,
  • Olga V. Bakina,
  • Pavel V. Uvarkin and ,
  • Nikita A. Luginin,
  • Yurii P. Sharkeev,
  • Margarita A. Khimich,
  • Olga V. Kazmina,
  • Edgar S. Dvilis and
  • Konstantin V. Ivanov
  • + 5 authors+ 0 author

18 February 2024

The present study showcases a novel effective technique for the surface modification of micro-arc diatomite coatings using low-energy, high-current electron beams (LEHCEBs). A variety of methods such as scanning electron microscopy, energy-dispersive...

(This article belongs to the Section Biobased and Biodegradable Metals)
  • Article
  • Open Access
9 Citations
4,572 Views
15 Pages

Electron-Beam Synthesis and Modification and Properties of Boron Coatings on Alloy Surfaces

  • Yury Yushkov,
  • Efim Oks,
  • Andrey Kazakov,
  • Andrey Tyunkov and
  • Denis Zolotukhin

10 October 2022

In this study, fore-vacuum plasma electron beam sources were used to deposit a few micron-thick boron coatings on A284 and ZrNb1 alloys and modify their surfaces. The coating deposition rate with a continuous 1 kW electron beam that evaporated the bo...

(This article belongs to the Special Issue Ceramic Coatings for High-Temperature Applications)
  • Article
  • Open Access
12 Citations
2,730 Views
17 Pages

15 February 2023

The surface of Inconel 625, a nickel-base alloy, was strengthened by vacuum electron beam scanning technology. The evolution of its microstructure was analyzed by electron backscatter diffraction (EBSD) and the friction and wear tester (RETC). The re...

(This article belongs to the Special Issue Advances in Laminated Metallic Composites)
  • Article
  • Open Access
30 Citations
4,719 Views
21 Pages

The Impact of EBM-Manufactured Ti6Al4V ELI Alloy Surface Modifications on Cytotoxicity toward Eukaryotic Cells and Microbial Biofilm Formation

  • Patrycja Szymczyk-Ziółkowska,
  • Viktoria Hoppe,
  • Małgorzata Rusińska,
  • Jolanta Gąsiorek and ,
  • Grzegorz Ziółkowski,
  • Karolina Dydak,
  • Joanna Czajkowska and
  • Adam Junka
  • + 3 authors+ 0 author

23 June 2020

Electron beam melting (EBM) is an additive manufacturing technique, which allows forming customized implants that perfectly fit the loss of the anatomical structure of bone. Implantation efficiency depends not only on the implant’s functional or mech...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
17 Citations
3,105 Views
11 Pages

Evolution of Microstructure at the Surface of 40CrNiMo7 Steel Treated by High-Current Pulsed Electron Beam

  • Huihui Wang,
  • Lianfu Li,
  • Sen Qiu,
  • Weidong Zhai and ,
  • Qiaomin Li and
  • Shengzhi Hao
  • + 1 author+ 0 author

25 March 2020

High current pulsed electron beam (HCPEB) has recently been developed as an effective technique of material surface modification. In this research, a self-developed HCPEB equipment (HOPE-I) was adopted to perform surface modification on quenched and...

  • Article
  • Open Access
2,140 Views
10 Pages

Structure–Phase Transformations in the Modified Surface of Al-20%Si Alloy Subjected to Two-Stage Treatment

  • Yulia Shliarova,
  • Dmitrii Zaguliaev,
  • Yurii Ivanov,
  • Victor Gromov and
  • Alexander Prudnikov

The paper describes the two-stage modification of the surface layer of hypereutectic Al-20%Si alloy that combines electroexplosive alloying by an Al-Y2O system with subsequent irradiation by pulsed electron beam. It is shown that irrespective of the...

(This article belongs to the Special Issue Corrosion and Tribocorrosion Behavior of Metals and Alloys)
  • Article
  • Open Access
17 Citations
4,989 Views
24 Pages

Electrochemical, Tribological and Biocompatible Performance of Electron Beam Modified and Coated Ti6Al4V Alloy

  • Maria Nikolova,
  • Maria Ormanova,
  • Veselina Nikolova and
  • Margarita D. Apostolova

Vacuum cathodic arc TiN coatings with overlaying TiO2 film were deposited on polished and surface roughened by electron beam modification (EBM) Ti6Al4V alloy. The substrate microtopography consisted of long grooves formed by the liner scan of the ele...

(This article belongs to the Special Issue Biomaterials for Bone Tissue Engineering 2.0)
  • Article
  • Open Access
7 Citations
2,574 Views
20 Pages

Combined Porous-Monolithic TiNi Materials Surface-Modified with Electron Beam for New-Generation Rib Endoprostheses

  • Anastasiia V. Shabalina,
  • Sergey G. Anikeev,
  • Sergei A. Kulinich,
  • Nadezhda V. Artyukhova and ,
  • Vitaly A. Vlasov,
  • Maria I. Kaftaranova,
  • Valentina N. Hodorenko,
  • Evgeny V. Yakovlev,
  • Evgeny A. Pesterev and
  • Victor E. Gunther
  • + 11 authors+ 6 authors

TiNi alloys are very widely used materials in implant fabrication. When applied in rib replacement, they are required to be manufactured as combined porous-monolithic structures, ideally with a thin, porous part well-adhered to its monolithic substra...

(This article belongs to the Section Bone Biomaterials)
  • Article
  • Open Access
11 Citations
2,690 Views
23 Pages

Combination of Electron Beam Surface Structuring and Plasma Electrolytic Oxidation for Advanced Surface Modification of Ti6Al4V Alloy

  • Hugo Mora-Sanchez,
  • Florian Pixner,
  • Ricardo Buzolin,
  • Marta Mohedano and ,
  • Raúl Arrabal,
  • Fernando Warchomicka and
  • Endzhe Matykina
  • + 2 authors+ 0 author

18 October 2022

The objective of this work is to study for the first time the combination of electron beam (EB) surface structuring and plasma electrolytic oxidation (PEO) with the aim of providing a multiscale topography and bioactive surface to the Ti6Al4V alloy f...

(This article belongs to the Special Issue Novel Coatings for Corrosion Protection)
  • Review
  • Open Access
75 Citations
14,767 Views
20 Pages

10 September 2020

During the last decades, electron-beam treatment technologies (EBTT) have been widely used for surface modification of metals and alloys. The EBT methods are known as accurate and efficient. They have many advantages in comparison with the convention...

(This article belongs to the Special Issue Electron Beam Treatment Technology in Metals)
  • Article
  • Open Access
11 Citations
3,419 Views
8 Pages

23 May 2022

We present the results of measurements of the ion composition of the plasma generated by an accelerated electron beam in the forevacuum pressure range. It has been found that the main contribution to ionization processes comes from beam electrons. It...

(This article belongs to the Section Electrocatalysis)
  • Article
  • Open Access
10 Citations
5,374 Views
10 Pages

Nanoporous structures have a great potential for application in electronic and photonic materials, including field effect transistors, photonic crystals, and quantum dots. The control of size and shape is important for such applications. In this stud...

  • Article
  • Open Access
797 Views
15 Pages

28 March 2026

Calcium carbonate is a widely used filler in polymer composites due to its low cost and ability to improve stiffness, dimensional stability, and impact resistance. However, its hydrophilic surface limits compatibility with nonpolar polymer matrices,...

  • Article
  • Open Access
25 Citations
4,173 Views
14 Pages

Evolution of Structure in AlCoCrFeNi High-Entropy Alloy Irradiated by a Pulsed Electron Beam

  • Kirill Osintsev,
  • Victor Gromov,
  • Yurii Ivanov,
  • Sergey Konovalov and ,
  • Irina Panchenko and
  • Sergey Vorobyev
  • + 1 author+ 0 author

1 August 2021

High-current pulsed electron-beam (HCPEB) surface modification of Al-Co-Cr-Fe-Ni high-entropy alloy (wt. %) Al—15.64; Co—7.78; Cr—8.87; Fe—22.31; Ni—44.57, fabricated via wire-arc additive manufacturing was studied. The initial condition of the sampl...

(This article belongs to the Section Structural Integrity of Metals)
  • Article
  • Open Access
16 Citations
3,967 Views
13 Pages

Contact Guidance Effect and Prevention of Microfouling on a Beta Titanium Alloy Surface Structured by Electron-Beam Technology

  • Sara Ferraris,
  • Fernando Warchomicka,
  • Jacopo Barberi,
  • Andrea Cochis and ,
  • Alessandro Calogero Scalia and
  • Silvia Spriano
  • + 1 author+ 0 author

Nano- and micro-structuring of implantable materials constitute a promising approach to introduce mechanical contact guidance effect, drive cells colonization, as well as to prevent bacteria adhesion and biofilm aggregation, through antifouling topog...

(This article belongs to the Special Issue Nanotechnology and Additive Manufacturing for Hard Tissue Regeneration)
  • Article
  • Open Access
13 Citations
9,090 Views
10 Pages

Electron Beam Immobilization of Novel Antimicrobial, Short Peptide Motifs Leads to Membrane Surfaces with Promising Antibacterial Properties

  • André Reinhardt,
  • Isabell Thomas,
  • Julie Schmauck,
  • Ralf Giernoth and ,
  • Agnes Schulze and
  • Ines Neundorf
  • + 1 author+ 0 author

In this study, the efficacy of electron beam irradiation versus chemical coupling for yielding polyethersulfone (PES) membranes with antibacterial properties was investigated. For the surface coating, a recently discovered lead compound, IL-KKA, comp...

  • Feature Paper
  • Article
  • Open Access
4 Citations
2,162 Views
17 Pages

Steel Surface Doped with Nb via Modulated Electron-Beam Irradiation: Structure and Properties

  • Maxim Sergeevich Vorobyov,
  • Elizaveta Alekseevna Petrikova,
  • Vladislav Igorevich Shin,
  • Pavel Vladimirovich Moskvin and ,
  • Yurii Fedorovich Ivanov,
  • Nikolay Nikolaevich Koval,
  • Tamara Vasil`evna Koval,
  • Nikita Andreevich Prokopenko,
  • Ruslan Aleksandrovich Kartavtsov and
  • Dmitry Alekseevich Shpanov
  • + 5 authors+ 0 author

20 June 2023

A niobium film on an AISI 5135 steel substrate was exposed to submillisecond pulsed electron-beam irradiation with controlled energy modulation within a pulse to increase the film–substrate adhesion. This modulated irradiation made it possible...

(This article belongs to the Special Issue Mechanical, Corrosive and Tribological Degradation of Metal Coatings and Modified Metallic Surfaces)
  • Article
  • Open Access
612 Views
19 Pages

Electron-Beam Modification of Baltic Coastal Quartz Sands for Enhanced Chromium Ion Removal from Water

  • Yuri Dekhtyar,
  • Marks Gorohovs,
  • Renate Kalnina,
  • Maija M. Kuklja and ,
  • Artūrs Mamajevs,
  • Sergey Rashkeev,
  • Elizabete Skrebele and
  • Hermanis Sorokins
  • + 3 authors+ 0 author

28 February 2026

Heavy metal contamination in coastal and ballast waters motivates the development of low-cost, environmentally compatible filtration media. This study investigates how 6 MeV electron-beam irradiation (0–100 Gy) modifies the surface electronic a...

(This article belongs to the Special Issue Green Adsorbents for Water Purification)
  • Article
  • Open Access
1 Citations
2,502 Views
18 Pages

The Influence of Pulsed Electron Beam Processing on the Quality of Working Surfaces of Titanium Alloy Products

  • Undrakh Mishigdorzhiyn,
  • Aleksey Pyatykh,
  • Andrey Savilov,
  • Nikolay Ulakhanov and ,
  • Ivan Galetsky,
  • Kirill Demin,
  • Alexander Tikhonov,
  • Maxim Vorobyov,
  • Elizaveta Petrikova and
  • Shunqi Mei
  • + 5 authors+ 0 author

Titanium alloys are widely used in medicine due to their unique properties, including inertness with respect to living tissues, light weight, high strength, and impact toughness. For successful implementation, titanium alloy implants should possess h...

  • Article
  • Open Access
6 Citations
3,079 Views
18 Pages

Anodic Oxidation of 3D Printed Ti6Al4V Scaffold Surfaces: In Vitro Studies

  • Talita Kathleen Correia de Sousa,
  • Fátima Raquel Maia,
  • Sandra Pina,
  • Rui L. Reis and ,
  • Joaquim Miguel Oliveira,
  • João Pedro Aquiles Carobolante,
  • Ana Lúcia do Amaral Escada,
  • Guilherme Arthur Longhitano and
  • Ana Paula Rosifini Alves
  • + 4 authors+ 0 author

19 February 2024

This study focuses on the surface modification of Ti6Al4V scaffolds produced through additive manufacturing using the Powder-Bed Fusion Electron-Beam Melting (PBF-EB) technique. From our perspective, this technique has the potential to enhance implan...

(This article belongs to the Section Applied Biosciences and Bioengineering)
  • Feature Paper
  • Article
  • Open Access
2 Citations
1,560 Views
15 Pages

Electron Beam Surface Treatment and Its Impact on the Plasticity of Fe-Based High-Entropy Alloy

  • Stefan Valkov,
  • Georgi Kotlarski,
  • Stoyan Parshorov,
  • Maria Ormanova and ,
  • Fatme Padikova,
  • Borislav Stoyanov and
  • Ivan Parshorov
  • + 2 authors+ 0 author

17 April 2025

In this work, we present results on the impact of electron beam surface modification on the phase composition, microstructure, chemical composition, and mechanical properties of Fe-Ni-Cr-Mo-W high-entropy alloy. During the experiments, the beam power...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Article
  • Open Access
3 Citations
3,045 Views
12 Pages

Irradiation of W and K-Doped W Laminates without or with Cu, V, Ti Interlayers under a Pulsed 6 MeV Electron Beam

  • D. Ticoș,
  • M. Galaţanu,
  • A. Galaţanu,
  • M. Dumitru and ,
  • M. L. Mitu,
  • N. Udrea,
  • A. Scurtu and
  • C. M. Ticoș
  • + 3 authors+ 0 author

26 January 2022

Small multilayered laminated samples consisting of stacks of W (or K-doped W) foils without an interlayer or with interlayers from Cu, V, and Ti were exposed to a pulsed electron beam with an energy of 6 MeV in several irradiation sessions. All sampl...

(This article belongs to the Special Issue Materials Thermal Behavior during Laser or Electron Beam Irradiation)
  • Article
  • Open Access
8 Citations
2,176 Views
16 Pages

Features of Electron Beam Processing of Mn-Zn Ferrites in the Fore-Vacuum Pressure Range in Continuous and Pulse Modes

  • Aleksandr S. Klimov,
  • Ilya Yu. Bakeev,
  • Anna V. Dolgova,
  • Andrey V. Kazakov and ,
  • Nikita S. Korablev and
  • Aleksey A. Zenin
  • + 1 author+ 0 author

13 October 2023

The results of electron beam processing of Mn-Zn ferrite samples using pulsed and continuous electron beams in the fore-vacuum pressure range (10 Pa) are presented. We find that continuous electron beam processing leads to surface structuring of the...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
5 Citations
5,205 Views
17 Pages

Structure and Properties of Al-Co-Cr-Fe-Ni High-Entropy Alloy Subjected to Electron–Ion Plasma Treatment

  • Yurii Ivanov,
  • Victor Gromov,
  • Sergey Konovalov,
  • Vladimir Shugurov and ,
  • Mikhail Efimov,
  • Anton Teresov,
  • Elizaveta Petrikova,
  • Irina Panchenko and
  • Yulia Shliarova
  • + 4 authors+ 0 author

20 November 2022

High-entropy alloys (HEAs) are a new class of materials consisting of at least five elements in equiatomic or near-equiatomic ratio. HEAs are subjected to various types of surface treatment to improve their properties. One of the most promising metho...

(This article belongs to the Special Issue Additive Technologies, Advanced Joining Technology and Study of Weld Joints)
  • Communication
  • Open Access
13 Citations
2,970 Views
9 Pages

Impact of Electronic Radiation on the Morphology of the Fine Structure of the Surface Layer of R6M5 Steel

  • Bauyrzhan Rakhadilov,
  • Aidar Kengesbekov,
  • Laila Zhurerova,
  • Rauan Kozhanova and
  • Zhuldyz Sagdoldina

27 January 2021

In recent decades, great efforts have been made to significantly improve the performance characteristics of high-speed steel using various surface hardening techniques. Electron beam modification is engaging because it has an exceptionally high therm...

  • Feature Paper
  • Article
  • Open Access
15 Citations
4,058 Views
12 Pages

Surface Modification of the EBM Ti-6Al-4V Alloy by Pulsed Ion Beam

  • Natalia Pushilina,
  • Ekaterina Stepanova,
  • Andrey Stepanov and
  • Maxim Syrtanov

19 March 2021

The effect of surface modification of Ti-6Al-4V samples manufactured by electron beam melting (EBM) using a pulsed carbon ion beam is studied in the present work. Based on the results of XRD, SEM, and TEM analysis, patterns of changes in the microstr...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
1,795 Views
7 Pages

22 November 2022

Surface modification improves the performance of materials in practical applications. In this paper, mechanical alloying pretreatment is adopted. Advanced non-equilibrium processing of a high-current pulse electron beam is then used to obtain an Sn-r...

(This article belongs to the Section Nanophotonics Materials and Devices)
  • Article
  • Open Access
8 Citations
6,068 Views
12 Pages

26 February 2016

Recent advances in micro/nano technology have driven artificial modifications of surface wettability by mimicking biological surfaces, such as superhydrophobic and water-harvesting surfaces. In this study, surface wettability of polycarbonate (PC) fi...

  • Article
  • Open Access
12 Citations
3,541 Views
13 Pages

Surface Engineering of Multi-Walled Carbon Nanotubes via Ion-Beam Doping: Pyridinic and Pyrrolic Nitrogen Defect Formation

  • Petr Korusenko,
  • Ksenia Kharisova,
  • Egor Knyazev,
  • Oleg Levin and ,
  • Alexander Vinogradov and
  • Elena Alekseeva
  • + 1 author+ 0 author

8 October 2023

In this study, we present an innovative ion-beam doping technique for the controlled modification of the near-surface region of multi-walled carbon nanotubes (MWCNTs) aimed at creating pyridinic and pyrrolic nitrogen defects in their walls. This meth...

(This article belongs to the Special Issue Practical Application of Functionalized Carbon-Based Nanomaterials - Volume Ⅱ)
  • Article
  • Open Access
3 Citations
3,775 Views
12 Pages

11 December 2022

We introduce a novel patterning technique based on e-beam lithography using vertically aligned carbon nanotube (VACNT) emitters with self-assembled monolayers (SAMs). A 20 μm line width of silicon wafer patterning was successfully demonstrated usi...

(This article belongs to the Special Issue The Research Related to Nanomaterial Cold Cathode)
  • Article
  • Open Access
5 Citations
8,477 Views
9 Pages

27 November 2019

Ion beam sputter etching has been widely used in material surface modification and transmission electron microscope (TEM) sample preparation. Due to the complexity of the ion beam etching process, the quantitative simulation of ion beam sputtering is...

(This article belongs to the Section Nanotechnology and Applied Nanosciences)
  • Article
  • Open Access
559 Views
12 Pages

27 July 2026

The formation of surface morphology under ion irradiation has been widely studied in various metals and metal surfaces. Nanoscale roughening or smoothing of the surface leads to changes in the thermal, electronic, and even antibacterial properties of...

(This article belongs to the Special Issue 10th Anniversary of Materials Section—Recent Advances in "Materials Sciences and Engineering")
  • Article
  • Open Access
8 Citations
2,052 Views
26 Pages

Investigating Resulting Surface Topography and Residual Stresses in Bending DC01 Sheet Under Tension Friction Test

  • Krzysztof Szwajka,
  • Tomasz Trzepieciński,
  • Marek Szewczyk,
  • Joanna Zielińska-Szwajka and
  • Marek Barlak

This article presents the results of experimental studies aimed at determining the values of residual stresses and coefficient of friction (CoF) in bending under tension friction test, which simulates friction conditions in sheet metal forming. The i...

(This article belongs to the Special Issue Advanced Surface Treatments and Coatings for Friction and Wear Reduction)
  • Article
  • Open Access
6 Citations
1,473 Views
26 Pages

Effect of SiO2 and MoS2 Particles as Lubricant Additives on Lubrication Performance in Sheet Metal Forming

  • Krzysztof Szwajka,
  • Tomasz Trzepieciński,
  • Marek Szewczyk and
  • Joanna Zielińska-Szwajka

4 October 2025

Modifying lubricants with hard material particles improves lubricant performance by allowing the particles to penetrate the contact area and separate the contacting surfaces. The use of solid particles as additives in fluid lubricants presents a prom...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
8 Citations
2,535 Views
12 Pages

Surface Modification of Magnetoactive Elastomers by Laser Micromachining

  • Izidor Straus,
  • Gaia Kravanja,
  • Luka Hribar,
  • Raphael Kriegl and ,
  • Matija Jezeršek,
  • Mikhail Shamonin,
  • Irena Drevensek-Olenik and
  • Gašper Kokot
  • + 3 authors+ 0 author

28 March 2024

It has been recently demonstrated that laser micromachining of magnetoactive elastomers is a very convenient method for fabricating dynamic surface microstructures with magnetically tunable properties, such as wettability and surface reflectivity. In...

(This article belongs to the Special Issue Advanced Rubber Composites (3rd Edition))
  • Article
  • Open Access
8 Citations
2,614 Views
15 Pages

Experimental Study and Mathematical Modeling of the Processes Occurring in ZrN Coating/Silumin Substrate Systems under Pulsed Electron Beam Irradiation

  • Nikolay N. Koval,
  • Tamara V. Koval,
  • Olga V. Krysina,
  • Yurii F. Ivanov and ,
  • Anton D. Teresov,
  • Pavel V. Moskvin,
  • My Kim An Tran,
  • Nikita A. Prokopenko and
  • Elizaveta A. Petrikova
  • + 4 authors+ 0 author

28 November 2021

This paper presents a study of a combined modification of silumin, which included deposition of a ZrN coating on a silumin substrate and subsequent treatment of the coating/substrate system with a submillisecond pulsed electron beam. The local temper...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
26 Citations
5,002 Views
15 Pages

Laser–Material Interactions of High-Quality Ultrashort Pulsed Vector Vortex Beams

  • Yue Tang,
  • Walter Perrie,
  • David Rico Sierra,
  • Qianliang Li and ,
  • Dun Liu,
  • Stuart P. Edwardson and
  • Geoff Dearden
  • + 2 authors+ 0 author

1 April 2021

Diffractive multi-beams based on 1 × 5 and 2 × 2 binary Dammann gratings applied to a spatial light modulator (SLM) combined with a nanostructured S-wave plate have been used to generate uniform multiple cylindrical vector beams with radial and azimu...

(This article belongs to the Special Issue Laser Micromachining)
  • Article
  • Open Access
4 Citations
2,812 Views
13 Pages

Thermal Modelling of Metals and Alloys Irradiated by Pulsed Electron Beam: Focus on Rough, Heterogeneous and Multilayered Materials

  • Andrea Lucchini Huspek,
  • Valentina Mataloni,
  • Ali Mohtashamifar,
  • Luca Paterlini and
  • Massimiliano Bestetti

Low-Energy High-Current Electron Beam (LEHCEB) is an innovative vacuum technology employed for the surface modification of conductive materials. Surface treatments by means of LEHCEB allow the melting and rapid solidification of a thin layer (up to ~...

  • Article
  • Open Access
2 Citations
876 Views
29 Pages

Effects of Electron Beam Hardening Parameters on the Residual Stresses and Microstructures in C45 Steel Cylindrical Specimens

  • Galya Duncheva,
  • Vladimir Dunchev,
  • Milka Atanasova,
  • Vladimir Todorov and ,
  • Yaroslav Argirov,
  • Marieta Ivanova and
  • Boris Petkov
  • + 2 authors+ 0 author

This article presents the effects of novel electron beam hardening (EBH) process parameters in terms of residual stresses (RSs) and microstructure modification in as-received C45 cylindrical specimens. The EBH was performed using continuous irradiati...

  • Article
  • Open Access
9 Citations
4,497 Views
14 Pages

Characterization of a Modified Clinical Linear Accelerator for Ultra-High Dose Rate Beam Delivery

  • Umberto Deut,
  • Aurora Camperi,
  • Cristiano Cavicchi,
  • Roberto Cirio and ,
  • Emanuele Maria Data,
  • Elisabetta Alessandra Durisi,
  • Veronica Ferrero,
  • Arianna Ferro,
  • Simona Giordanengo and
  • Anna Vignati
  • + 13 authors+ 8 authors

27 August 2024

Irradiations at Ultra-High Dose Rate (UHDR) regimes, exceeding 40 Gy/s in single fractions lasting less than 200 ms, have shown an equivalent antitumor effect compared to conventional radiotherapy with reduced harm to normal tissues. This work detail...

(This article belongs to the Special Issue Advances in Particle Acceleration: Novel Techniques, Instruments and Applications)
  • Article
  • Open Access
5 Citations
1,779 Views
22 Pages

Ultrasonic Cavitation Erosion Behavior of GX40CrNiSi25-20 Cast Stainless Steel through Yb-YAG Surface Remelting

  • Daniela Cosma,
  • Ion Mitelea,
  • Ilare Bordeașu,
  • Ion Dragoș Uțu and
  • Corneliu Marius Crăciunescu

23 August 2024

Laser beam remelting is a relatively simple and highly effective technique for the physical modification of surfaces to improve resistance to cavitation erosion. In this study, we investigated the effect of laser remelting on the surface of cast stai...

(This article belongs to the Special Issue Corrosion, Fatigue and Corrosion Protection of Metals and Their Alloys in Various Environments)
  • Review
  • Open Access
40 Citations
7,369 Views
20 Pages

23 August 2023

Titanium alloys are important strategic structural materials with broad application prospects in the industries of aerospace, space technology, automobiles, biomedicine, and more. Considering the different requirements for the diverse applications of...

(This article belongs to the Special Issue Surface Modification Technology of Biomedical Metals)
  • Article
  • Open Access
5 Citations
4,615 Views
17 Pages

Early Peri-Implant Bone Healing on Laser-Modified Surfaces with and without Hydroxyapatite Coating: An In Vivo Study

  • Ana Flávia Piquera Santos,
  • Rodrigo Capalbo da Silva,
  • Henrique Hadad,
  • Laís Kawamata de Jesus and ,
  • Maísa Pereira-Silva,
  • Heloisa Helena Nímia,
  • Sandra Helena Penha Oliveira,
  • Antônio Carlos Guastaldi,
  • Thallita Pereira Queiroz and
  • Francisley Ávila Souza
  • + 10 authors+ 5 authors

17 July 2024

(1) Objective: The aim of this study was to assess the biological behavior of bone tissue on a machined surface (MS) and modifications made by a laser beam (LS) and by a laser beam incorporated with hydroxyapatite (HA) using a biomimetic method witho...

(This article belongs to the Special Issue Novel Insights of Bone Repair: Strategies for Improvement, Microscopic, Molecular and Ultrastrastructural Aspects)

of 3