applsci-logo

Journal Browser

Journal Browser

Advances in Particle Acceleration: Novel Techniques, Instruments and Applications

A special issue of Applied Sciences (ISSN 2076-3417). This special issue belongs to the section "Applied Physics General".

Deadline for manuscript submissions: closed (20 July 2024) | Viewed by 17007

Special Issue Editors


E-Mail Website
Guest Editor
RadiaBeam Technologies, LLC, Santa Monica, CA 90404, USA
Interests: linear accelerators; industrial radiations; radiofrequency; microwave and THz technologies

E-Mail Website
Guest Editor
Istituto Nazionale di Fisica Nucleare, Via Enrico Fermi 54, 00044 Frascati, Italy
Interests: linear accelerators; high-energy physics; free-electron lasers; compton light sources; medical applications of linacs in radiation therapy; industrial applications of linacs

E-Mail Website
Guest Editor
Fermilab, Batavia, IL 60510, USA
Interests: high energy physics; accelerator physics; cyclotrons

Special Issue Information

Dear Colleagues,

Particle accelerators are critical research tools in nuclear physics, high-energy physics, materials science, and radiochemistry, and they are also used in commercial applications such as semiconductor fabrication, radiotherapy, security, and irradiation. Recent advances in accelerators have become possible due to developments in the physics of charged particle beams, microwave technologies, use of new materials, and fabrication techniques. Many innovations in accelerator science and technology have already been acknowledged, while many others are still in development.

The goal of this Special Issue is to offer a comprehensive look at the recent advances in particle accelerators for both research and industrial applications. The topics of interest for this issue include recent results and proposals for research facilities, novel accelerator concepts, materials, and fabrication techniques, beam diagnostics and instruments, advanced theoretical concepts as well as novel applications such as producing advanced high-performance materials, chemical effects of radiation under special conditions, advanced radiotherapy concepts, and radioisotope production and replacement.

Dr. Sergey Kutsaev
Dr. Luigi Faillace
Dr. Carol Johnstone
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Applied Sciences is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2400 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • particle accelerators
  • beam dynamics
  • novel acceleration techniques
  • advanced materials
  • novel fabrication techniques
  • radiation
  • accelerator applications
  • radiotherapy

Benefits of Publishing in a Special Issue

  • Ease of navigation: Grouping papers by topic helps scholars navigate broad scope journals more efficiently.
  • Greater discoverability: Special Issues support the reach and impact of scientific research. Articles in Special Issues are more discoverable and cited more frequently.
  • Expansion of research network: Special Issues facilitate connections among authors, fostering scientific collaborations.
  • External promotion: Articles in Special Issues are often promoted through the journal's social media, increasing their visibility.
  • e-Book format: Special Issues with more than 10 articles can be published as dedicated e-books, ensuring wide and rapid dissemination.

Further information on MDPI's Special Issue polices can be found here.

Published Papers (10 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Editorial

Jump to: Research, Review

6 pages, 183 KiB  
Editorial
Advances in Particle Acceleration: Novel Techniques, Instruments and Applications
by Sergey V. Kutsaev
Appl. Sci. 2024, 14(18), 8098; https://doi.org/10.3390/app14188098 - 10 Sep 2024
Abstract
In the last decade, there have been significant advancements in accelerator technologies, driven by both fundamental research and practical applications in various fields, including X-ray science, medical treatments, and industrial processes [...] Full article

Research

Jump to: Editorial, Review

14 pages, 3771 KiB  
Article
Characterization of a Modified Clinical Linear Accelerator for Ultra-High Dose Rate Beam Delivery
by Umberto Deut, Aurora Camperi, Cristiano Cavicchi, Roberto Cirio, Emanuele Maria Data, Elisabetta Alessandra Durisi, Veronica Ferrero, Arianna Ferro, Simona Giordanengo, Oscar Martì Villarreal, Felix Mas Milian, Elisabetta Medina, Diango M. Montalvan Olivares, Franco Mostardi, Valeria Monti, Roberto Sacchi, Edoardo Salmeri and Anna Vignati
Appl. Sci. 2024, 14(17), 7582; https://doi.org/10.3390/app14177582 - 27 Aug 2024
Viewed by 443
Abstract
Irradiations at Ultra-High Dose Rate (UHDR) regimes, exceeding 40 Gy/s in single fractions lasting less than 200 ms, have shown an equivalent antitumor effect compared to conventional radiotherapy with reduced harm to normal tissues. This work details the hardware and software modifications implemented [...] Read more.
Irradiations at Ultra-High Dose Rate (UHDR) regimes, exceeding 40 Gy/s in single fractions lasting less than 200 ms, have shown an equivalent antitumor effect compared to conventional radiotherapy with reduced harm to normal tissues. This work details the hardware and software modifications implemented to deliver 10 MeV UHDR electron beams with a linear accelerator Elekta SL 18 MV and the beam characteristics obtained. GafChromic EBT XD films and an Advanced Markus chamber were used for dosimetry characterization, while a silicon sensor assessed the machine’s beam pulses stability and repeatability. The dose per pulse, average dose rate and instantaneous dose rate in the pulse were evaluated for four experimental settings, varying the source-to-surface distance and the beam collimation, i.e., with and without the use of a cylindrical applicator. The results showed a dose per pulse from 0.6 Gy to a few tens of Gy and an average dose rate up to 300 Gy/s. The obtained results demonstrate the possibility to perform in vitro radiobiology experiments and test new technologies for beam monitoring and dosimetry at the upgraded LINAC, thus contributing to the electron UHDR research field. Full article
Show Figures

Figure 1

17 pages, 10043 KiB  
Article
Research and Design of the RF Cavity for an 11 MeV Superconducting Cyclotron
by Yue Wu, Zi-Feng He, Wei-Shi Wan, Pan-Pan Zheng and Hua-Fei Yu
Appl. Sci. 2024, 14(9), 3549; https://doi.org/10.3390/app14093549 - 23 Apr 2024
Viewed by 724
Abstract
In contrast to the room temperature cyclotron, the superconducting cyclotron’s high operational magnetic field and small extraction radius lead to a magnet design with a reduced radius. This limits the space available for the RF cavity in the 11 MeV superconducting cyclotron, necessitating [...] Read more.
In contrast to the room temperature cyclotron, the superconducting cyclotron’s high operational magnetic field and small extraction radius lead to a magnet design with a reduced radius. This limits the space available for the RF cavity in the 11 MeV superconducting cyclotron, necessitating a more compact RF cavity design. By using the transmission line theory, the complex structure of the quarter-wavelength coaxial cavity can be represented as a microwave circuit. Through relevant theoretical analytical formulas, equivalent circuit parameters can be derived. The resonant frequency of the RF cavity is then determined using the equivalent circuit method. The optimization of the RF cavity structure was achieved by creating a numerical model and conducting finite element numerical calculations on the high-frequency resonant system. The comparative results between the equivalent circuit and numerical calculations indicate that the frequency error remains within 0.1%, validating the compact RF cavity design. A multiple linear regression analysis facilitates the prediction of resonance frequency across various parameter variables. By analyzing the fitting formula, RF cavity machining error requirements are established, ensuring a prediction error within 1%, thus meeting engineering design criteria. Full article
Show Figures

Figure 1

15 pages, 2877 KiB  
Article
Plasma Accelerator Utilizing the Medium of Near-Earth Space for Orbital Transfer Vehicles
by Alexander R. Karimov, Paul A. Murad, Vladimir A. Yamschikov and Dmitriy S. Baranov
Appl. Sci. 2023, 13(24), 13195; https://doi.org/10.3390/app132413195 - 12 Dec 2023
Cited by 1 | Viewed by 1039
Abstract
The development of plasma accelerators for spacecraft propulsion that can capture space matter and energy shows great promise for spacecraft advancement. Such a technical approach offers a viable solution to the challenges associated with traditional rocket fuel. In the present paper, we explore [...] Read more.
The development of plasma accelerators for spacecraft propulsion that can capture space matter and energy shows great promise for spacecraft advancement. Such a technical approach offers a viable solution to the challenges associated with traditional rocket fuel. In the present paper, we explore the utilization of interplanetary matter as fuel for plasma thrusters on space vehicles, specifically for flights within the vicinity of Earth. Herein, solar radiation is considered a source of energy for the ionization and acceleration of particles captured from the space environment. Full article
Show Figures

Figure 1

18 pages, 9204 KiB  
Article
Design of a Miniaturized Electron Cyclotron Resonance Ion Source for High-Voltage Proton Accelerator
by Hua-Fei Yu, Zi-Feng He, Ming-Hua Zhao, Wei-Shi Wan, Huan-Ling Liu, Yue Wu, Wen-Zhuang Lv, Da-Yong Zhou and Huan-Ting Lu
Appl. Sci. 2023, 13(15), 8831; https://doi.org/10.3390/app13158831 - 31 Jul 2023
Cited by 1 | Viewed by 1826
Abstract
The Electron Cyclotron Resonance (ECR) ion source fulfills high-current, high-efficiency, and compactness requirements for high-voltage proton accelerators. It is a cathode-free source that uses microwaves to heat a magnetically confined plasma, so there is no cathode loss resulting in a short service life. [...] Read more.
The Electron Cyclotron Resonance (ECR) ion source fulfills high-current, high-efficiency, and compactness requirements for high-voltage proton accelerators. It is a cathode-free source that uses microwaves to heat a magnetically confined plasma, so there is no cathode loss resulting in a short service life. We finished the design for a miniaturization ECR ion source system, including a microwave system and source body. The traditional microwave system’s scale, which is approximately 1 m, has been reduced to 0.234 m, and the transmission efficiency is greater than 90%. The influence of cavity size and magnetic field distribution on gas ionization is analyzed under the condition that the outer size of the permanent magnet ring is limited, and the optimal scheme of cavity size and saddle-shaped magnetic field distribution is obtained. This design meets the requirement of fitting the ion source system into the restricted space in the high-voltage accelerator’s head. Full article
Show Figures

Figure 1

17 pages, 32881 KiB  
Article
Nb3Sn Cavities Coated by Tin Vapor Diffusion Method at Peking University
by Gai Wang, Shengwen Quan, Lin Lin, Manqian Ren, Jiankui Hao, Fang Wang, Fei Jiao, Feng Zhu, Senlin Huang, Xueqing Yan and Kun Zhu
Appl. Sci. 2023, 13(15), 8618; https://doi.org/10.3390/app13158618 - 26 Jul 2023
Cited by 3 | Viewed by 1210
Abstract
Nb3Sn-coating experiments on samples and single-cell cavities were conducted at Peking University (PKU) to understand the Nb3Sn growth process using the vapor diffusion method. The evaporation of tin and tin chloride used in the vapor diffusion process was simulated [...] Read more.
Nb3Sn-coating experiments on samples and single-cell cavities were conducted at Peking University (PKU) to understand the Nb3Sn growth process using the vapor diffusion method. The evaporation of tin and tin chloride used in the vapor diffusion process was simulated and experimentally analyzed. The results show that the nucleation process is generally uniform, and the atomic ratios of Nb/O and Sn/O were found to be 1:2 within the 10 nm surface of the nucleated samples. Three tin sources were distributed along the cavity axis to obtain a uniform grain size on the cavity surface, and a surface tin content of 25~26% was achieved. The tin segregation effect was found in long-time coatings or coatings with insufficient tin, resulting in a low Sn% and bad cavity performance. By overcoming the tin segregation problem, a Nb3Sn cavity with a 750 nm grain size was produced by 1200 °C coating for 80 min and 1150 °C annealing for 60 min. The acceleration gradient reached 17.3 MV/m without quenching and an obvious Q-slope at 4.2 K. The relationship between coating recipes and vertical test results is discussed and conclusive advice is provided in this paper. Full article
Show Figures

Figure 1

18 pages, 3139 KiB  
Article
DYNAMION—A Powerful Beam Dynamics Software Package for the Development of Ion Linear Accelerators and Decelerators
by Stepan Yaramyshev, Winfried Barth, Simon Lauber, Maksym Miski-Oglu, Anna Rubin, Uwe Scheeler, Hartmut Vormann and Markus Vossberg
Appl. Sci. 2023, 13(14), 8422; https://doi.org/10.3390/app13148422 - 21 Jul 2023
Viewed by 1161
Abstract
Numerous ambitious particle accelerator facilities, based on proton and ion linear accelerators, have recently been in development for fundamental research, as well as for industrial applications. The advanced design of such new machines, as well as the upgrade and optimization of existing linacs, [...] Read more.
Numerous ambitious particle accelerator facilities, based on proton and ion linear accelerators, have recently been in development for fundamental research, as well as for industrial applications. The advanced design of such new machines, as well as the upgrade and optimization of existing linacs, requires adequate, precise and reliable tools to simulate beam dynamics. The software package DYNAMION, created about 30 years ago, is undergoing systematic improvement and further development in order to characterize modern ion linacs and to provide solutions for its intrinsic complex problems. The DYNAMION code features Front to End beam dynamics simulations under space charge conditions in a linac system, comprising an arbitrary sequence of accelerating-focusing structures and beam transport lines. The evolution of a macroparticle ensemble could be analyzed at a high level of specification. A 3D distribution of the external electrical field (RFQ, DTL) is modeled using integrated internal solvers. Optionally, a 3D electromagnetic field mapping, supplied by specialized external codes, could be used. The recent status of the DYNAMION software package is presented in this paper. Furthermore, the performance of the code is demonstrated on the basis of its application for various linear accelerator/decelerator projects. Full article
Show Figures

Figure 1

12 pages, 2632 KiB  
Article
Upgrades of a Small Electrostatic Dust Accelerator at the University of Stuttgart
by Yanwei Li, Marcel Bauer, Sebastian Kelz, Heiko Strack, Jonas Simolka, Christian Mazur, Maximilian Sommer, Anna Mocker and Ralf Srama
Appl. Sci. 2023, 13(7), 4441; https://doi.org/10.3390/app13074441 - 31 Mar 2023
Viewed by 1542
Abstract
In this paper, we describe the upgrade of a small electrostatic dust accelerator located at the University of Stuttgart. The newly developed dust source, focusing lens, differential detector and linac stage were successfully installed and tested in the beam line. The input voltage [...] Read more.
In this paper, we describe the upgrade of a small electrostatic dust accelerator located at the University of Stuttgart. The newly developed dust source, focusing lens, differential detector and linac stage were successfully installed and tested in the beam line. The input voltage range of the dust source was extended from 0–20 kV to 0–30 kV. A newly developed dust detector with two differential charge sensitive amplifiers is employed to monitor particles with speeds from several m/s to several km/s and with surface charges above 0.028 fC. The post-stage linac provides an additional acceleration ability with a total voltage of up to 120 kV. The entire system of this dust accelerator works without protection gas and without a complex high voltage terminal. The volumes to be pumped down are small and can be quickly evacuated. The new system was used to accelerate micron- and submicron-sized metal particles or coated mineral materials. Improvements in the acceleration system allow for a wider variety of dust materials and new applications. Full article
Show Figures

Figure 1

23 pages, 3445 KiB  
Article
X-ray Free Electron Laser Accelerator Lattice Design Using Laser-Assisted Bunch Compression
by Haoran Xu, Petr M. Anisimov, Bruce E. Carlsten, Leanne D. Duffy, Quinn R. Marksteiner and River R. Robles
Appl. Sci. 2023, 13(4), 2285; https://doi.org/10.3390/app13042285 - 10 Feb 2023
Cited by 1 | Viewed by 1774
Abstract
We report the start-to-end modeling of our accelerator lattice design employing a laser-assisted bunch compression (LABC) scheme in an X-ray free electron laser (XFEL), using the proposed Matter-Radiation Interactions in Extremes (MaRIE) XFEL parameters. The accelerator lattice utilized a two-stage bunch compression scheme, [...] Read more.
We report the start-to-end modeling of our accelerator lattice design employing a laser-assisted bunch compression (LABC) scheme in an X-ray free electron laser (XFEL), using the proposed Matter-Radiation Interactions in Extremes (MaRIE) XFEL parameters. The accelerator lattice utilized a two-stage bunch compression scheme, with the first bunch compressor performing a conventional bulk compression enhancing the beam current from 20 A to 500 A, at 750 MeV. The second bunch compression was achieved by modulating the beam immediately downstream of the first bunch compressor by a laser with 1-μm wavelength in a laser modulator, accelerating the beam to the final energy of 12 GeV, and compressing the individual 1-μm periods of the modulated beam into a sequence of microbunches with 3-kA current spikes by the second bunch compressor. The LABC architecture presented had been developed based on the scheme of enhanced self-amplified spontaneous emission (ESASE), but operated in a disparate regime of parameters. Enabled by the novel technology of the cryogenic normal conducting radiofrequency photoinjector, we investigated an electron beam with ultra-low emittance at the starting point of the lattice design. Our work aimed at mitigating the well-known beam instabilities to preserve the beam emittance and suppress the energy spread growth. Full article
Show Figures

Figure 1

Review

Jump to: Editorial, Research

36 pages, 7254 KiB  
Review
Transformative Technology for FLASH Radiation Therapy
by Reinhard Schulte, Carol Johnstone, Salime Boucher, Eric Esarey, Cameron G. R. Geddes, Maksim Kravchenko, Sergey Kutsaev, Billy W. Loo, Jr., François Méot, Brahim Mustapha, Kei Nakamura, Emilio A. Nanni, Lieselotte Obst-Huebl, Stephen E. Sampayan, Carl B. Schroeder, Ke Sheng, Antoine M. Snijders, Emma Snively, Sami G. Tantawi and Jeroen Van Tilborg
Appl. Sci. 2023, 13(8), 5021; https://doi.org/10.3390/app13085021 - 17 Apr 2023
Cited by 11 | Viewed by 4659
Abstract
The general concept of radiation therapy used in conventional cancer treatment is to increase the therapeutic index by creating a physical dose differential between tumors and normal tissues through precision dose targeting, image guidance, and radiation beams that deliver a radiation dose with [...] Read more.
The general concept of radiation therapy used in conventional cancer treatment is to increase the therapeutic index by creating a physical dose differential between tumors and normal tissues through precision dose targeting, image guidance, and radiation beams that deliver a radiation dose with high conformality, e.g., protons and ions. However, the treatment and cure are still limited by normal tissue radiation toxicity, with the corresponding side effects. A fundamentally different paradigm for increasing the therapeutic index of radiation therapy has emerged recently, supported by preclinical research, and based on the FLASH radiation effect. FLASH radiation therapy (FLASH-RT) is an ultra-high-dose-rate delivery of a therapeutic radiation dose within a fraction of a second. Experimental studies have shown that normal tissues seem to be universally spared at these high dose rates, whereas tumors are not. While dose delivery conditions to achieve a FLASH effect are not yet fully characterized, it is currently estimated that doses delivered in less than 200 ms produce normal-tissue-sparing effects, yet effectively kill tumor cells. Despite a great opportunity, there are many technical challenges for the accelerator community to create the required dose rates with novel compact accelerators to ensure the safe delivery of FLASH radiation beams. Full article
Show Figures

Figure 1

Back to TopTop