Intermediate-volatility organic compounds (IVOCs) have been recognized as an important contributor to the secondary organic aerosol (SOA) formation via gas-phase reactions. However, it is unclear whether or not IVOCs-SOA can be produced in the aqueou...
Thiophenic compounds constitute a class of sulfur compounds derived by thiophene, containing at least one thiophenic ring. Their presence in fuels (crude oil, etc.) is important and can reach 3% m/m. The combustion of fuels leads to the formation of...
Benzofuran (BF), benzothiophene (BT), indole (IN), dibenzofuran (DBF), dibenzothiophene (DBT), and carbazole (CA) are typical heterocyclic aromatic compounds (NSO-HETs), which can coexist with polycyclic aromatic hydrocarbons (PAHs) in combustion and...
Ultradeep desulfurization of fuels is a method of enormous demand due to the generation of harmful compounds during the burning of sulfur-containing fuels, which are a major source of environmental pollution. Among the various desulfurization methods...
A source of Brønsted acid centers, generated on the surface of two mesoporous silica supports of different structures (SBA-15 and MCF), was 3-(trihydroxysilyl)-1-propanesufonic acid (TPS). The materials obtained were characterized and applied...
Organic/silicon hybrid solar cells have attracted much interest due to their cheap fabrication process and simple device structure. A category of organic substances, Dibenzothiophene–Spirobifluorene–Dithiophene (DBBT-mTPA-DBT), comprises...
To probe the possibility of thiophenolate as an origin of dibenzothiophenes (DBTs) and establish the detailed chemical transformations from thiophenolate to DBTs, the thermal degradation of thiophenolate has been carried out at various temperatures....
Dibenzothiophene (DBT) is a widespread environmental pollutant. The most common metabolic pathway for DBT degradation by Gordonia strains is the 4S pathway, which is under the control of the dsz operon. The ability to utilize DBT as the sole source o...
A number of actinobacteria of the genus Gordonia are able to use dibenzothiophene (DBT) and its derivatives as the only source of sulfur, which makes them promising agents for the process of oil biodesulfurization. Actinobacteria assimilate sulfur fr...
Wettability is an important factor affecting the performance of catalytic oxidative desulfurization. In order to develop an efficient catalyst for the extractive coupled catalytic oxidative desulfurization (ECODS) of fuel oil by H2O2 and acetonitrile...
The batch, repeated batch and fed-batch cultivation strategies, in stirred tank bioreactors, were evaluated to maximize biomass production and the cells’ desulfurization activity (CDA) of Rhodococcus qingshengii IGTS8. The batch culture reached...
Aerobic oxidative desulfurization (ODS) of model liquid fuel (dodecane spiked with dibenzothiophene (DBT)) was carried out in the presence of bulk and supported Keggin-type heteropoly acids H3+nPMo12-nVnO40 (HPA-n, n = 0–3) as heterogeneous catalysts...
A flexible polyionic liquid (PIL) nanofiber membrane-supported phosphomolybdic acid catalyst (PM-PIL) was fabricated via stepwise chemical transformation of polyacrylonitrile (PAN) nanofiber membranes. The nitrile groups of PAN were converted into py...
For ultra-deep desulfurization of diesel fuel, this study applied the ultrasound-assisted catalytic ozonation process to the dibenzothiophene (DBT) removal process with four Keggin-type heteropolyacids (HPA) as catalysts and acetonitrile as extractan...
The intermediate di-[EMIM]Cl was synthesized from methyl imidazole and 1,4-dichlorobutane and then reacted with cobalt chloride at 105 °C to prepare a bi-[EMIM]CoCl3 ionic liquid catalyst. The di-[EMIM]CoCl3 catalyst coupled with oxone to remove...
The expansion of the Alberta Oil Sands Region (AOSR) has increased the deposition of petroleum-derived chemicals into the surrounding environment. Among these, polycyclic aromatic compounds (PACs), including sulfur-containing heterocyclic hydrocarbon...
This work reports the results of the ultrasound-assisted hydrothermal synthesis of two sets of V2O5 dispersed on SBA-15 and Zr doped SBA-15 catalysts used for the oxidation of dibenzothiophene (DBT) in a model diesel via the combination of oxidation,...
In Qinglong ore field, the paleo-oil reservoir is found to be associated with antimony deposits, and they have a close genetic relationship. In this study, the aromatics geochemistry of paleo-oil reservoir bitumen was studied to further discuss the t...
A mesoporous silica-supported molybdenum oxide catalyst with a cerium(Ce) modifier was prepared by in situ synthesis and used in a hydrogen peroxide (H2O2) system for the desulfurization of dibenzothiophene (DBT), benzothiophene (BT), and 4,6-dimethy...
NbVOx mixed oxides were synthesized, characterized, and evaluated as catalysts for the extractive catalytic oxidative desulfurization (ECODS) of dibenzothiophene (DBT) using acetonitrile as a solvent. The mixed oxides were prepared using two differen...
In this work, an N-butyl-pyridinium-based ionic liquid [BPy]BF4 was prepared. The effect of extraction desulfurization on model oil with thiophene and dibenzothiophene (DBT) was investigated. Ionic liquids and hydrogen peroxide (30%) were tested in e...
Biodesulfurization (BDS) is considered a complementary technology to the traditional hydrodesulfurization treatment for the removal of recalcitrant sulfur compounds from petroleum products. BDS was investigated in a bubble column bioreactor using two...
Three heteropolyanion substituted hydrotalcite-like compounds (HPA-HTLcs) including Mg9Al3(OH)24[PW12O40](MgAl-PW12), Mg9Al3(OH)24[PMo12O40] (MgAl-PMo12) and Mg12Al4(OH)32[SiW12O40] (MgAl-SiW12), were synthesized, characterized and used as catalysts...
Amphiphilic hybrid catalysts were prepared by modifying [SMo12O40]2− with tetrabutylammonium bromide (TBAB), 1-butyl-3-methylimidazole bromide (BMIMBr) and octadecyl trimethyl ammonium bromide (ODAB), respectively. The prepared catalysts were c...
Multiple biomarker datasets and compound-specific sulfur isotopic compositions (δ34S) of dibenzothiophenes (DBTs) were analyzed for crude oil from Well B6 on the Maigaiti Slope, Tarim Basin. The very low concentrations of DBTs (124.9 μg/g oi...
6 January 2023
Desulfurization of organic sulfur in the fuel oil is essential to cut down the emission of sulfur dioxide, which is a major precursor of the acid rain and PM2.5. Currently, hydrodesulfurization is regarded as a state-of-art technology for the desulfu...
Various Keggin-type heteropolyoxometalate catalysts with structural defects and surface acidity were synthesized by immobilizing 12-phosphotungstic acid (HPW) on mesoporous SBA−15, to produce near-zero-sulfur diesel fuel. As the calcination tem...
NiMoS and CoMoS catalysts were synthesized and applied to hydrotreating (HDT) of FCC light cycle oils (FCC-LCO) in an autoclave batch reactor at 613 K and 8.6 MPa H2. The S and N compounds in LCO were classified into four and three groups, respective...
To achieve sulfur content in gas oil at a near-zero level, new catalysts with improved hydrogenation functions are needed. In this work, new Ni-Mo-Mo hydrodesulfurization (HDS) catalysts supported by Al2O3-CeO2 materials were synthesized to evaluate...
Efficient oxidation of refractory sulfides, such as dibenzothiophene (DBT) and its derivatives, provides a promising strategy to produce fuel oils with ultra-low sulfur content, or even completely sulfur-free. In this study, a series of non-stoichiom...
A titanium-chromium-oxide catalyst was prepared by a facile calcination of titanium-modified MIL-101(Cr). The resulting material, possessing a surface area of 60 m2 g−1 and a titania content of 50.0 wt%, can be directly used as the catalyst for...
The growing emphasis on controlling sulfur-containing compounds in fuel oils has driven the development of numerous desulfurization technologies. Among these, catalytic oxidative desulfurization (CODS) has garnered considerable research interest due...
The presence of sulfur compounds in fossil fuels has been an important concern in recent decades as an environmental risk due to the increase of greenhouse gases in the atmosphere and accentuation of acid rain. This study evaluates modified clays as...
Titanium nanotubes were hydrothermally synthesized via a two-step method for ODS (oxidative desulfurization). The catalysts’ structures were characterized by XRD (X-ray diffraction), FT-IR, UV-Vis (UV-Vis diffuse reflectance spectra), NH3-TPD,...
Sulfur compounds in fossil fuels pose significant environmental and industrial challenges, creating a demand for efficient and sustainable desulfurization strategies. Among the available techniques, adsorptive desulfurization has emerged as a promisi...
UiO-67(Zr), as a member of Zr-based metal–organic frameworks (MOFs), has attracted much attention owing to its merits, involving large surface area, high pore volume, and good structural stability. However, it is generally inactive in many cata...
A core-shell Cu-benzene-1,3,5-tricarboxylic acid (Cu-BTC)@TiO2 was successfully synthesized for photocatalysis-assisted adsorptive desulfurization to improve adsorptive desulfurization (ADS) performance. Under ultraviolet (UV) light irradiation, the...
The effective and deep removal of unreactive sulfides to achieve ultra-low-sulfur or sulfur-free oils has recently attracted extensive attention. In this work, a series of UiO-66 based catalysts have been prepared facilely for the effective removal o...
In this study, oxidative desulfurization (ODS) of modeled and real oil samples was investigated using manganese-dioxide-supported, magnetic-reduced graphene oxide nanocomposite (MnO2/MrGO) as a catalyst in the presence of an H2O2/HCOOH oxidation syst...
In this work, CoMoS catalysts were synthesized onto porous alumina spheres obtained using Pluronic P-123 (PS) or urea (US) and used as bifunctional nanomaterials for two energy applications: hydrodesulfurization and energy storage. For the first appl...
A novel tungsten-based heterojunction nanocomposite material was developed for the efficient oxidative desulfurization (ODS) of fuel oil, enabling the production of low-sulfur fuel and a reduction in harmful SOx emissions. In this material, the WC/W2...
Adsorption of sulfur compoundsby porous materials is an effective way to produce cleaner diesel fuel.In this study, adsorption of refractory thiophenic sulfur compounds, i.e., benzothiophene (BT), dibenzothiophene (DBT), and 4,6-dimethyldibenzothioph...
Oxidative desulfurization (ODS) is a promising alternative to conventional desulfurization methods because it operates under relatively mild conditions. Mixing-assisted oxidative desulfurization (MAOD), a variant of ODS, uses high-shear mixing to imp...
A series of γ-alumina samples with different exposure ratio of {111} facet were synthesized by an efficient hydrothermal method via adjusting the pH value of the gel precursor. The nanorod alumina supported catalyst with the highest exposure of...
To address the challenge of ultra-deep desulfurization in fuels, a series of heteropolyacid-based poly(ionic liquid) catalysts (C4-PIL@PW, C8-PIL@PW, and C16-PIL@PW) were synthesized via radical polymerization and anion exchange methods. The prepared...
Changes in the expression of α7 nicotinic acetylcholine receptors (α7 nAChRs) in the human brain are widely assumed to be associated with neurological and neurooncological processes. Investigation of these receptors in vivo depends on the availabilit...
Hydrodesulfurization (HDS) has been commercially employed for the production of ultra-low sulfur fuel oil. However, HDS is unable to remove sterically hindered sulfur-containing compounds such as dibenzothiophene (DBT) and benzothiophene (BT). An alt...
Alkylated polycyclic aromatic hydrocarbons (alkyl-PAHs), dibenzothiophenes (DBTs), and unsubstituted polycyclic aromatic hydrocarbons (PAHs) are naturally present in fossil fuels. Thus, they can be considered as candidates for markers of pollution fr...
Oxidative desulfurization (ODS) is the promising new method for super deep desulfurization of fuel oil. The oxidative desulfurization performance of the metal-N4-chelates metallophthalocyanines (MPcs) is related to the chemical properties of conjugat...
A heavy crude oil has been treated with deuterated alkylating reagents (CD3I and C2D5I) and directly analyzed without any prior fractionation and chromatographic separation by high-field Orbitrap Fourier Transform Mass Spectrometry (FTMS) and Fourier...
of 2