Skip to Content

799 Results Found

  • Article
  • Open Access
1 Citations
3,121 Views
25 Pages

Study of a Single Joint Between Two FDM-Printed PLA Filaments

  • Jaime Orellana-Barrasa,
  • Emilio Antón Carrasco-Otermín and
  • José Ygnacio Pastor

22 November 2025

Isolating the mechanical properties of an FDM joint by performing a direct tensile test on it is something that has yet to be achieved. Developing a methodology for isolating the properties of a single joint could help to inform simulations and achie...

(This article belongs to the Special Issue Additive Manufacturing of Polymer Based Materials)
  • Article
  • Open Access
117 Views
28 Pages

Shape Continuity-Driven 3D Surface Reconstruction from Parallel Cross Sections

  • Jefferson Salcedo-Chavez,
  • Juan Pareja-Corcho,
  • Carlos Cadavid-Moreno and
  • Oscar Ruiz-Salguero

10 November 2026

3D shape reconstruction from parallel cross sections is central in medical imaging, computer-aided design, computer graphics, and other fields. Existing methods, e.g., NUAGES, are based on the identification of 2D Delone–Voronoi and medial axis...

(This article belongs to the Special Issue Mathematical Applications in Computer Graphics)
  • Article
  • Open Access
8 Citations
3,945 Views
22 Pages

10 May 2019

In this paper, an improved two-dimensional (2-D) direction of arrival (DOA) estimation algorithm for L-shaped nested arrays is proposed. Unlike the approach for a classical nested array, which use the auto-correlation matrix (ACM) to increase the deg...

(This article belongs to the Section Remote Sensors)
  • Article
  • Open Access
5 Citations
2,570 Views
15 Pages

The Effect of pH Solution in the Sol–Gel Process on the Process of Formation of Fractal Structures in Thin SnO2 Films

  • Ekaterina Bondar,
  • Igor Lebedev,
  • Anastasia Fedosimova,
  • Elena Dmitriyeva and ,
  • Sayora Ibraimova,
  • Anton Nikolaev,
  • Aigul Shongalova,
  • Ainagul Kemelbekova and
  • Mikhail Begunov
  • + 4 authors+ 0 author

In this paper, we investigated fractal cluster structures of colloidal particles in tin dioxide films obtained from lyophilic film-forming systems SnCl4/EtOH/NH4OH with different pH levels. It was revealed that at the ratio Sn > Cl2 > O2, N2 =...

(This article belongs to the Section Mathematical Physics)
  • Article
  • Open Access
16 Citations
4,663 Views
19 Pages

24 February 2022

The recent COVID-19 pandemic has shown that there is a substantial need for high-precision reliable diagnostic tests able to detect extremely low virus concentrations nearly instantaneously. Since conventional methods are fairly limited, there is a n...

(This article belongs to the Special Issue Advances in Micro- and Nano-Electronics)
  • Article
  • Open Access
3 Citations
1,551 Views
14 Pages

11 July 2025

Microfluidics is a powerful tool with extensive applications, including chemical synthesis and biological detection. However, the limited channel size and high viscosity of samples/reagents make it difficult to fully mix liquids and improve the react...

(This article belongs to the Section B: Biology and Biomedicine)
  • Article
  • Open Access
1 Citations
502 Views
27 Pages

19 September 2026

Autonomous motivation may support healthy eating, whereas body-shape concerns may fuel controlled eating regulation; the two had not been examined jointly with Mediterranean diet adherence in Romanian adults. In this cross-sectional study, a convenie...

(This article belongs to the Section Health Psychology)
  • Article
  • Open Access
31 Citations
5,804 Views
20 Pages

20 April 2021

A fast mixing is critical for subsequent practical development of microfluidic devices, which are often used for assays in the detection of reagents and samples. The present work sets up computational fluid dynamics simulations to explore the flow ch...

(This article belongs to the Special Issue Micro-Reaction Engineering)
  • Article
  • Open Access
13 Citations
3,589 Views
9 Pages

Phononic Coupled-Resonator Waveguide Micro-Cavities

  • Ting-Ting Wang,
  • Sylwester Bargiel,
  • Franck Lardet-Vieudrin,
  • Yan-Feng Wang and ,
  • Yue-Sheng Wang and
  • Vincent Laude
  • + 1 author+ 0 author

26 September 2020

Phononic coupled-resonator waveguide cavities are formed by a finite chain of defects in a complete bandgap phononic crystal slab. The sample is machined in a fused silica plate by femtosecond printing to form an array of cross-shape holes. The colle...

(This article belongs to the Section Acoustics and Vibrations)
  • Article
  • Open Access
643 Views
21 Pages

DPSF: A Dynamic Patch Shape Selection Framework for Cross-Model Transferable Adversarial Attacks

  • Han Zhang,
  • Boqi Huang,
  • Bingshu Wang,
  • Laixian Zhang and ,
  • Aihong Shangguan and
  • Haosu Zhang
  • + 1 author+ 0 author

22 July 2026

Adversarial patch attacks are core tools to evaluate adversarial robustness in remote sensing image classification, yet existing methods with fixed patch shapes and single-model optimization yield poor cross-architecture black-box transferability. Th...

(This article belongs to the Special Issue Information Acquisition and Processing for Remote Sensing (IAP-RS))
  • Article
  • Open Access
14 Citations
3,843 Views
15 Pages

26 July 2021

The results of strain measuring experiments, with the help of rosettes consisting of fiber Bragg grating sensors (FBG) embedded at the manufacturing stage in a polymer composite material are considered in this paper. The samples were made by the dire...

(This article belongs to the Section Optical Sensors)
  • Article
  • Open Access
4 Citations
2,955 Views
15 Pages

31 January 2022

This study evaluates the impact of changing the deformation routes of the extrusion process in a cross-shaped die (CCE) on the structure and properties of a CuZn36 alloy (% at.). Samples with dimensions of Ø8 × 36 mm were subjected to ex...

(This article belongs to the Special Issue Progress in Plastic Deformation of Metals and Alloys)
  • Article
  • Open Access
9 Citations
2,763 Views
24 Pages

11 July 2023

Ultra-wideband (UWB) technology is widely used in many communication scenarios. However, narrowband systems can easily interfere with the UWB system, which generates multipath fading. In order to solve these interferences and meet the design requirem...

(This article belongs to the Special Issue New Trends in Microwave/Millimeter Antennas/Filters: From Fundamental Research to Applications)
  • Feature Paper
  • Article
  • Open Access
13 Citations
2,852 Views
21 Pages

Three-Dimensional Printed Nanocomposites with Tunable Piezoresistive Response

  • Francesca Aliberti,
  • Liberata Guadagno,
  • Raffaele Longo,
  • Marialuigia Raimondo and ,
  • Roberto Pantani,
  • Andrea Sorrentino,
  • Michelina Catauro and
  • Luigi Vertuccio
  • + 3 authors+ 0 author

2 November 2024

This study explores a novel approach to obtaining 3D printed strain sensors, focusing on how changing the printing conditions can produce a different piezoresistive response. Acrylonitrile butadiene styrene (ABS) filled with different weight concentr...

(This article belongs to the Section 2D and Carbon Nanomaterials)
  • Article
  • Open Access
30 Citations
3,998 Views
28 Pages

A Microfluidic Approach for Synthesis of Silver Nanoparticles as a Potential Antimicrobial Agent in Alginate–Hyaluronic Acid-Based Wound Dressings

  • Alexandra Cătălina Bîrcă,
  • Oana Gherasim,
  • Adelina-Gabriela Niculescu,
  • Alexandru Mihai Grumezescu and ,
  • Ionela Andreea Neacșu,
  • Cristina Chircov,
  • Bogdan Ștefan Vasile,
  • Ovidiu Cristian Oprea,
  • Ecaterina Andronescu and
  • Alina Maria Holban
  • + 8 authors+ 3 authors

The recognized antimicrobial activity of silver nanoparticles is a well-studied property, especially when designing and developing biomaterials with medical applications. As biological activity is closely related to the physicochemical characteristic...

(This article belongs to the Special Issue Precious Metals in Nanomedicine: Assessing the True Value of Gold and Silver)
  • Article
  • Open Access
3 Citations
2,731 Views
20 Pages

2 December 2024

Most deep learning-based hyperspectral anomaly detection (HAD) methods focus on modeling or reconstructing the hyperspectral background to obtain residual maps from the original hyperspectral images. However, these methods typically do not pay enough...

(This article belongs to the Special Issue Artificial Intelligence Remote Sensing for Earth Observation)
  • Article
  • Open Access
3 Citations
2,153 Views
15 Pages

10 August 2024

Four-dimensional-printed smart materials have a wide range of applications in areas such as biomedicine, aerospace, and soft robotics. Among 3D printing technologies, fused deposition molding (FDM) is economical, simple, and apply to thermoplastics....

(This article belongs to the Section Organic Crystalline Materials)
  • Article
  • Open Access
9 Citations
6,139 Views
22 Pages

11 January 2023

The split Hopkinson pressure bars (SHPB) system is the most commonly employed machine to study the dynamic characteristics of different materials under high strain rates. In this research, a numerical investigation is carried out to study different b...

(This article belongs to the Special Issue Lightweight Composites Materials: Sustainability and Applications)
  • Article
  • Open Access
4 Citations
2,609 Views
22 Pages

9 May 2022

Microchannels located at the cement–rock interface can form potential pathways for formation fluid leakage in oil and gas wells. The effects of geometric shape, quantity, and the inclination angle of microchannels on the flow through cemented r...

(This article belongs to the Special Issue Safe and Efficient Exploitation and Utilization of Deep Earth Resources)
  • Article
  • Open Access
3,899 Views
17 Pages

3 October 2024

This paper presents an iterative stress wave log beam imaging algorithm based on external shape to predict the size, shape, and position of internal features in logs. The algorithm’s accuracy is analyzed to establish a theoretical and scientifi...

(This article belongs to the Special Issue Wood Quality and Mechanical Properties: 2nd Edition)
  • Article
  • Open Access
36 Citations
7,944 Views
10 Pages

Influence of the Cross-Link Density on the Rate of Crystallization of Poly(ε-Caprolactone)

  • Igor Sedov,
  • Timur Magsumov,
  • Albert Abdullin,
  • Egor Yarko and ,
  • Timur Mukhametzyanov,
  • Alexander Klimovitsky and
  • Christoph Schick
  • + 2 authors+ 0 author

11 August 2018

Cross-linked poly(ε-caprolactone) (PCL) is a smart biocompatible polymer exhibiting two-way shape memory effect. PCL samples with different cross-link density were synthesized by heating the polymer with various amounts of radical initiator b...

  • Article
  • Open Access
14 Citations
5,620 Views
12 Pages

25 June 2018

As an important index of weld quality, the weld bead geometry is closely related to the welding process parameters (WPP). Therefore, it is crucial to establish the relationships between the WPP and weld bead shape to serve as an indicator of the weld...

(This article belongs to the Special Issue Laser Welding)
  • Article
  • Open Access
47 Citations
6,428 Views
22 Pages

High-Throughput, Label-Free Isolation of White Blood Cells from Whole Blood Using Parallel Spiral Microchannels with U-Shaped Cross-Section

  • Amirhossein Mehran,
  • Peyman Rostami,
  • Mohammad Said Saidi,
  • Bahar Firoozabadi and
  • Navid Kashaninejad

20 October 2021

Rapid isolation of white blood cells (WBCs) from whole blood is an essential part of any WBC examination platform. However, most conventional cell separation techniques are labor-intensive and low throughput, require large volumes of samples, need ex...

(This article belongs to the Special Issue Microfluidics for Biomedical Applications)
  • Article
  • Open Access
279 Views
26 Pages

18 August 2026

To explore the significant systematic deviations of FENSAP-ICE numerical simulations under supercooled large droplet (SLD) conditions, a ridge regression correction method that integrates numerical priors and domain-knowledge-aided features for ice s...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
2 Citations
1,452 Views
15 Pages

26 October 2025

W/EUROFER functionally graded material (FGM) plasma-sprayed coatings are used as a protective layer in nuclear fusion applications. It is vital to develop a non-destructive test method to analyze interface characteristics and detect delamination in c...

(This article belongs to the Special Issue Advancements in Ultrasonic Testing for Metallurgical Materials)
  • Article
  • Open Access
6 Citations
2,875 Views
22 Pages

Stability Loss Analysis for Thin-Walled Shells with Elliptical Cross-Sectional Area

  • Ján Kostka,
  • Jozef Bocko,
  • Peter Frankovský,
  • Ingrid Delyová and ,
  • Tomáš Kula and
  • Patrik Varga
  • + 1 author+ 0 author

28 September 2021

The aim of the scientific contribution is to point out the possibility of applicability of cylindrical shells with a constant elliptical cross-sectional shape for stability loss analysis. The solution to the problem consists of two approaches. The fi...

(This article belongs to the Special Issue Manufacturing and Mechanics of Materials)
  • Communication
  • Open Access
11 Citations
6,011 Views
9 Pages

The Sonic Resonance Method and the Impulse Excitation Technique: A Comparison Study

  • Tomáš Húlan,
  • Filip Obert,
  • Ján Ondruška,
  • Igor Štubňa and
  • Anton Trník

16 November 2021

In this study, resonant frequencies of flexurally vibrating samples were measured using the sonic resonant method (SRM) and the impulse excitation technique (IET) to assess the equivalency of these two methods. Samples were made from different materi...

(This article belongs to the Special Issue Non-destructive Testing in Civil Engineering)
  • Article
  • Open Access
6 Citations
5,022 Views
18 Pages

Influence of Cross-Linking Degree on Hydrodynamic Behavior and Stimulus-Sensitivity of Derivatives of Branched Polyethyleneimine

  • Alina Amirova,
  • Tatyana Kirila,
  • Mikhail Kurlykin,
  • Andrey Tenkovtsev and
  • Alexander Filippov

9 May 2020

Cross-linked derivatives of acylated branched polyethyleneimine containing 2-isopropyl-2-oxazoline units were investigated in chloroform and aqueous solutions using methods of molecular hydrodynamics, static and dynamic light scattering, and turbidit...

(This article belongs to the Special Issue Polymer Structure and Property II)
  • Article
  • Open Access
26 Citations
4,603 Views
25 Pages

Effects of Aperture Shape on Absorption Property of Acoustic Metamaterial of Parallel-Connection Helmholtz Resonator

  • Shaohua Bi,
  • Fei Yang,
  • Shuai Tang,
  • Xinmin Shen and ,
  • Xiaonan Zhang,
  • Jingwei Zhu,
  • Xiaocui Yang,
  • Wenqiang Peng and
  • Feng Yuan
  • + 4 authors+ 0 author

14 February 2023

A Helmholtz resonator (HR) with an embedded aperture is an effective acoustic metamaterial for noise reduction in the low-frequency range. Its sound absorption property is significantly affected by the aperture shape. Sound absorption properties of H...

(This article belongs to the Special Issue Advances in Metamaterials: Structure, Properties and Applications)
  • Article
  • Open Access
1,983 Views
15 Pages

Optimization of Mechanical Properties during Cold Rolling and Wrap-Forming for Metal Helical Tubes

  • Shuyang Zhang,
  • Yuming Chen,
  • Yan Wang,
  • Hui Yang and ,
  • Congfa Zhang,
  • Jintong Liu and
  • Zongquan Deng
  • + 2 authors+ 0 author

30 September 2024

The proposed method involves the utilization of a strip roll-forming technique to fulfill the specific requirements for constructing large-scale structures in orbit and space station trusses during extraterrestrial exploration. This involves progress...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
17 Citations
8,048 Views
15 Pages

23 November 2022

The estimation of biological sex is of paramount relevance in the analysis of skeletal remains recovered in forensic contexts. This study aims to assess sexual dimorphism for identification purposes, from two reference samples of the Portuguese popul...

(This article belongs to the Collection The Rise of Forensic Anthropology and Documented Human Osteological Collections)
  • Article
  • Open Access
4 Citations
1,692 Views
18 Pages

23 January 2025

The purpose of this research was to evaluate the quality of small features fabricated by the fused filament fabrication (FFF) method. The samples containing circular and square cross-sections through holes with different dimensions, lengths, and orie...

(This article belongs to the Special Issue Precision and Ultra-Precision Subtractive and Additive Manufacturing Processes of Alloys and Steels, 2nd Edition)
  • Article
  • Open Access
2 Citations
2,519 Views
12 Pages

Movement Strategy Influences on the Characteristics of Low-Carbon Steel Generated by the Lamination Object Manufacturing Method

  • Tran Le Hong Ngoc,
  • Ha Thi Xuan Chi,
  • Pham Son Minh,
  • Van-Thuc Nguyen and
  • Tran Minh The Uyen

19 March 2024

This paper investigates the effects of heating movement techniques on the properties of low-carbon steel samples that are 3D printed using S20C lamination object manufacturing (LOM). A Tungsten iner gas (TIG) machine and a computer numerical control...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
4 Citations
1,944 Views
24 Pages

Leaf Surface Micromorphology in Hybrids of Wheat and ×Trititrigia × Elymus farctus

  • Alexander V. Babosha,
  • Pavla O. Loshakova,
  • Alina A. Pogost,
  • Margarita M. Gevorkyan and ,
  • Anastasia D. Alenicheva,
  • Galina I. Komarova,
  • Tatyana S. Wineshenker,
  • Irina N. Klimenkova and
  • Vladimir P. Upelniek
  • + 4 authors+ 0 author

24 October 2024

The leaf surface micromorphology and the size of the stomatal complex of hybrids in the eighth seed generation from the crossing of ×Trititrigia cziczinii × Elymus farctus (f11814) on the wheat-like wheat-wheatgrass hybrid w107 were inves...

(This article belongs to the Section Crop Breeding and Genetics)
  • Article
  • Open Access
1 Citations
4,307 Views
27 Pages

5 May 2018

Several forest inventory techniques utilize approaches that are similar to stereological approaches often applied in microscopy and other fields. Stereology is characterized by the description and estimation of properties of objects based on samples...

(This article belongs to the Section Forest Inventory, Modeling and Remote Sensing)
  • Article
  • Open Access
16 Citations
2,781 Views
9 Pages

Study on the Photocatalytic Properties of Flower-Shaped SnO2

  • Tingting Shao,
  • Xinrui Cao,
  • Juntang Dong,
  • Jing Ning and ,
  • Fuchun Zhang,
  • Xiaoyang Wang,
  • Yuyang Cheng,
  • Huirong Kou and
  • Weibin Zhang
  • + 4 authors+ 0 author

29 September 2022

Using cetyltrimethylammonium bromide (CTAB) as the surfactant from the precursors of SnCl2·2H2O, the flower-shaped nano composite of tin oxide (SnO2) is prepared by the simple eco-friendly hydrothermal method. We can see that the as-prepared S...

  • Article
  • Open Access
1,348 Views
34 Pages

Heat Propagation Through Fins Made of Polymeric Materials Manufactured by 3D Printing

  • Florin Negoescu,
  • Vasile Merticaru,
  • Andrei Marius Mihalache,
  • Vasile Ermolai and ,
  • Oana Dodun,
  • Nicolae-Răzvan Mititelu,
  • Gheorghe Nagîț,
  • Marius-Ionuț Rîpanu,
  • Adelina Hrițuc and
  • Laurențiu Slătineanu
  • + 5 authors+ 0 author

26 May 2026

To investigate simultaneously both the effect of fin cross-sectional shape on heat transfer and the influence of different polymeric materials, test samples were manufactured by 3D printing in the form of bushings with attached radial fins of varying...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
3 Citations
3,019 Views
13 Pages

Binder Jetting 3D Printing of Biomass–Fungi Composite Materials: A Preliminary Experimental Study

  • Yeasir Mohammad Akib,
  • Caleb Oliver Bedsole,
  • Jackson Sanders,
  • Harlie Warren and ,
  • Zhijian Pei and
  • Brian D. Shaw
  • + 1 author+ 0 author

This paper reports on a preliminary experimental study on binder jetting 3D printing of biomass–fungi composite materials. Biomass–fungi composite materials have potential applications in the packaging, furniture, and construction industr...

(This article belongs to the Section Biomimetics of Materials and Structures)
  • Article
  • Open Access
35 Citations
3,545 Views
19 Pages

18 April 2023

Thin-walled elements are widely used in the aerospace industry, where the aim is to reduce the process time and the weight of the structure while ensuring the sufficient quality of the finished product. Quality is determined by geometric structure pa...

  • Article
  • Open Access
15 Citations
5,943 Views
12 Pages

The Application of Globular Water-Atomized Iron Powders for Additive Manufacturing by a LENS Technique

  • Tomasz Durejko,
  • Justyna Aniszewska,
  • Michał Ziętala,
  • Anna Antolak-Dudka and ,
  • Tomasz Czujko,
  • Robert A. Varin and
  • Vlad Paserin
  • + 2 authors+ 0 author

18 May 2018

The water-atomized ATOMET 28, 1001, 4701, and 4801 powders, manufactured by Rio Tinto Metal Powders, were used for additive manufacturing by a laser engineered net shaping (LENS) technique. Their overall morphology was globular and rounded with a siz...

(This article belongs to the Special Issue Laser Materials Processing)
  • Article
  • Open Access
4 Citations
4,149 Views
15 Pages

Reversible Photo-Induced Reshaping of Imprinted Microstructures Using a Low Molecular Azo Dye

  • Burhan Kaban,
  • Sekvan Bagatur,
  • Marcus Soter,
  • Hartmut Hillmer and
  • Thomas Fuhrmann-Lieker

31 January 2022

A blend of low molecular azo glass (AZOPD) and polystyrene (PS) were used for the systematic investigation of photo-induced stretching and recovery of nanoimprinted structures. For this purpose, light and heat was used as recovery stimuli. The AZOPD/...

(This article belongs to the Special Issue Advances in Multifunctional Polymer-Matrix Composites)
  • Article
  • Open Access
39 Citations
6,665 Views
19 Pages

3 March 2022

The pore-throat network of rock exerts a vital influence on the permeability and mechanical properties of the rock. Resorting to X-ray micro-CT scanning, the present work investigates the pore-throat structure of marine biogenic carbonate samples fro...

  • Article
  • Open Access
10 Citations
5,978 Views
20 Pages

Population Genetic Structure Is Unrelated to Shell Shape, Thickness and Organic Content in European Populations of the Soft-Shell Clam Mya Arenaria

  • Michele De Noia,
  • Luca Telesca,
  • David L. J. Vendrami,
  • Hatice K. Gokalp and ,
  • Grégory Charrier,
  • Elizabeth M. Harper and
  • Joseph I. Hoffman
  • + 2 authors+ 0 author

11 March 2020

The soft-shell clam Mya arenaria is one of the most ancient invaders of European coasts and is present in many coastal ecosystems, yet little is known about its genetic structure in Europe. We collected 266 samples spanning a latitudinal cline from t...

(This article belongs to the Special Issue Genetic Diversity of Marine Populations)
  • Feature Paper
  • Article
  • Open Access
10 Citations
6,042 Views
16 Pages

Variability of Nutritional, Antioxidant, and Textural Traits of a Collection of Snap Beans of Different Colors

  • Valeria Menga,
  • Clara Fares,
  • Ana Campa,
  • Juan Jose Ferreira and ,
  • Elena Bitocchi,
  • Roberto Papa and
  • Romina Beleggia
  • + 2 authors+ 0 author

A set of 54 snap bean lines grown under organic farming was characterized for different traits: pod color, pod cross-section shape, pod section width (PSW), protein content (PC), and sugar content (S). After cooking, the lines were analyzed for firmn...

(This article belongs to the Special Issue Horticultural Plants and By-Products as Sources of Biological Active Compounds)
  • Article
  • Open Access
7 Citations
3,832 Views
13 Pages

10 July 2020

In this article, we present the design and validation of a non-contact scanning system for the development of a three-dimensional (3D) model of moist biological samples. Due to the irregular shapes and low stiffness of soft tissue samples, the use of...

(This article belongs to the Section Sensing and Imaging)
  • Article
  • Open Access
25 Citations
8,318 Views
9 Pages

17 April 2014

Chitosan membranes can undergo a glass transition at room temperature triggered by hydration. The mechanical properties of the membranes were followed by a tension test and dynamic mechanical analysis (DMA), with the sample in wet conditions after be...

(This article belongs to the Collection Polysaccharides)
  • Article
  • Open Access
2 Citations
1,015 Views
15 Pages

Exploring Social Representations of Climate Change Among Qatari University Youth: A Comprehensive Analysis of Environmental Awareness and Behavior

  • Abedulaziz Ali M. Al-Mannai,
  • Mousa Jawasreh,
  • Magdy Atef Mahfouz Abita,
  • Chedli Baya Chatti and
  • Yousif Mahdi

19 November 2025

Climate change remains one of the greatest global challenges. This study explores perceptions among female students at Qatar University (N = 890), recognizing the sample’s institutional and gender specificity. Using a cross-sectional design and...

(This article belongs to the Section Air, Climate Change and Sustainability)
  • Article
  • Open Access
248 Views
23 Pages

Long-Term Elevational Redistribution of Vegetation Greenness Along the Dushanzi–Kuqa Transect on the Southern Flank of the Tianshan Mountains

  • Zekun Ding,
  • Xiangzhi Kong,
  • Yanhu Mu,
  • Minghao Liu and ,
  • Zhuang Wang,
  • Lingjie Li,
  • Lijie Zhang and
  • Wudong Wang
  • + 3 authors+ 0 author

29 October 2026

Mountain vegetation change is commonly summarized as a mean greening or browning trend, or as the displacement of a discrete boundary; both can miss changes in the shape of the elevation profile of vegetation greenness. Here we tested whether the gre...

(This article belongs to the Special Issue Remote Sensing of the Mountain Eco-Environment)
  • Article
  • Open Access
33 Citations
5,180 Views
20 Pages

Deviations of the SLM Produced Lattice Structures and Their Influence on Mechanical Properties

  • Radek Vrána,
  • Tomáš Koutecký,
  • Ondřej Červinek,
  • Tomáš Zikmund and ,
  • Libor Pantělejev,
  • Jozef Kaiser and
  • Daniel Koutný
  • + 2 authors+ 0 author

26 April 2022

Selective laser melting (SLM) is an additive manufacturing technology suitable for producing cellular lattice structures using fine metal powder and a laser beam. However, the shape and dimensional deviations occur on the thin struts during manufactu...

  • Article
  • Open Access
571 Citations
28,250 Views
19 Pages

24 October 2017

Smartphones, smartwatches, fitness trackers, and ad-hoc wearable devices are being increasingly used to monitor human activities. Data acquired by the hosted sensors are usually processed by machine-learning-based algorithms to classify human activit...

of 16