Skip to Content

1,810 Results Found

  • Article
  • Open Access
5 Citations
4,433 Views
12 Pages

10 March 2023

Blood viscosity is influenced by several factors, including red blood cell (RBC) deformability, hematocrit (Hct), and plasma protein levels. To effectively isolate the individual contributions of several factors, it is necessary to simultaneously mea...

(This article belongs to the Special Issue Complex Systems in Biophysics: Modeling and Analysis)
  • Article
  • Open Access
23 Citations
5,287 Views
24 Pages

21 December 2022

A deep understanding of the pore-scale fluid flow mechanism during the CO2 flooding process is essential to enhanced oil recovery (EOR) and subsurface CO2 sequestration. Two-phase flow simulations were performed to simulate the CO2 flooding process b...

(This article belongs to the Topic Porous Flow of Energy & CO2 Transformation and Storage in Deep Formations)
  • Article
  • Open Access
6 Citations
3,153 Views
17 Pages

3 April 2023

Blood elasticity is quantified using a single compliance model by analyzing pulsatile blood flow. However, one compliance coefficient is influenced substantially by the microfluidic system (i.e., soft microfluidic channels and flexible tubing). The n...

(This article belongs to the Special Issue Advanced Biomanufacturing for Biomedical Engineering Applications)
  • Article
  • Open Access
14 Citations
3,891 Views
16 Pages

Microfluidic Droplet-Generation Device with Flexible Walls

  • Sajad Yazdanparast,
  • Pouya Rezai and
  • Alidad Amirfazli

15 September 2023

Controlling droplet sizes is one of the most important aspects of droplet generators used in biomedical research, drug discovery, high-throughput screening, and emulsion manufacturing applications. This is usually achieved by using multiple devices t...

(This article belongs to the Section B: Biology and Biomedicine)
  • Article
  • Open Access
1 Citations
1,237 Views
21 Pages

10 April 2026

Blood viscosity is strongly dependent on hematocrit, and the hematocrit–viscosity relationship is an important determinant of blood rheology under physiological and pathological conditions. However, obtaining a full hematocrit–viscosity c...

(This article belongs to the Special Issue Integrated Microfluidic Biosensing Systems: Designs and Applications)
  • Article
  • Open Access
6 Citations
2,833 Views
16 Pages

23 February 2022

This paper establishes a mathematic model of a CO2 two-phase ejector to investigate flow distribution in the components of a mixing chamber and diffuser. The suction chamber was modeled using the characteristic line method to describe the development...

(This article belongs to the Special Issue Advances in Computational Science and Its Applications)
  • Article
  • Open Access
5 Citations
2,174 Views
21 Pages

Methane/Air Flame Control in Non-Premixed Bluff Body Burners Using Ring-Type Plasma Actuators

  • Fatemeh Bagherighajari,
  • Mohammadmahdi Abdollahzadehsangroudi and
  • José C. Páscoa

22 January 2025

Enhancing the combustion efficiency and flame stability in conventional systems is essential for reducing carbon emissions and advancing sustainable energy solutions. In this context, electrohydrodynamic plasma actuators offer a promising active cont...

(This article belongs to the Special Issue Flow Control and Beyond Enhancing Performance and Energy Efficiency in Complex Fluid System)
  • Article
  • Open Access
463 Views
21 Pages

Relative Permeability Characteristics of Natural Gas and CO2 Mixtures in Matrix and Fractured Cores: An Experimental Study

  • Hongyou Zhang,
  • Wenzheng Liu,
  • Guangyi Sun,
  • Xin Liu and ,
  • Zhihui Wei,
  • Lei Zhang and
  • Hai Sun
  • + 2 authors+ 0 author

15 June 2026

To clarify the oil–gas multiphase flow behavior of natural gas/CO2 composite flooding in the dual-medium system of the BZ26-6 fractured reservoir, systematic oil–gas relative permeability experiments were conducted under reservoir tempera...

(This article belongs to the Special Issue Advances in Reservoir Simulation and Multiphase Flow in Porous Media)
  • Article
  • Open Access
48 Citations
1,374 Views
28 Pages

12 September 2025

A potential flow theory-based fully nonlinear 2D NWT is developed in the time domain to investigate the hydrodynamic performance of a submerged circular cylindrical WEC device under combined wave–current conditions. The hydrodynamic force on th...

(This article belongs to the Section Marine Energy)
  • Feature Paper
  • Article
  • Open Access
10 Citations
3,051 Views
14 Pages

Verification Analysis of Volume Flow Measured by a Direct Method and by Two Indirect CO2 Balance Methods

  • David Janke,
  • Diliara Willink,
  • Christian Ammon,
  • El-Hadj Moustapha Doumbia and ,
  • Anke Römer,
  • Barbara Amon,
  • Thomas Amon and
  • Sabrina Hempel
  • + 3 authors+ 0 author

20 May 2022

Ammonia and greenhouse gases have a negative impact on the environment. The most important agricultural sources of ammonia are dairy cattle housing systems, which are mainly naturally ventilated. Estimating emissions for naturally ventilated barns (N...

(This article belongs to the Special Issue Novel Approaches for Assessment and Control of Gaseous Emission Levels at Animal Production Facilities)
  • Article
  • Open Access
7 Citations
3,528 Views
9 Pages

High-Speed Generation of Microbubbles with Constant Cumulative Production in a Glass Capillary Microfluidic Bubble Generator

  • Jian Yu,
  • Wei Cheng,
  • Jinchun Ni,
  • Changwu Li and ,
  • Xinggen Su,
  • Hui Yan,
  • Fubing Bao and
  • Likai Hou
  • + 3 authors+ 0 author

This work reports a simple bubble generator for the high-speed generation of microbubbles with constant cumulative production. To achieve this, a gas–liquid co-flowing microfluidic device with a tiny capillary orifice as small as 5 μm is fab...

(This article belongs to the Special Issue Recent Development of Micro/Nanofluidic Devices)
  • Article
  • Open Access
2,182 Views
10 Pages

Frequency Spectrum Characterization of Infrared Thermal Images of Methane Diffusion Flames

  • Qinglin Niu,
  • Zengjie Zhou,
  • Ao Sun,
  • Xiaying Meng and
  • Pengjun Zhang

28 June 2025

Experimental measurements of midwave infrared thermal images of methane diffusion flames at different concomitant flow velocities were obtained as snapshot data to analyze the flame scintillation effect. The spectral proper orthogonal decomposition (...

(This article belongs to the Special Issue Sooting Flame Diagnostics and Modeling)
  • Article
  • Open Access
16 Citations
3,497 Views
17 Pages

Effects of Methane Pre-Reforming Percentage and Flow Arrangement on the Distribution of Temperature and Thermal Stress in Solid Oxide Fuel Cell

  • Weiqiang Cai,
  • Qingrong Zheng,
  • Wanneng Yu,
  • Zibin Yin and ,
  • Jinliang Yuan,
  • Zhonggang Zhang and
  • Yuyao Pei
  • + 2 authors+ 0 author

7 July 2022

To obtain detailed information on the temperature field and thermal stress field inside the solid oxide fuel cell (SOFC) fueled with partially pre-reformed methane. A three-dimensional geometric and mathematical model of the SOFC is implemented by us...

(This article belongs to the Special Issue Advances of Solid Oxide Fuel Cells)
  • Article
  • Open Access
2 Citations
1,480 Views
17 Pages

Venturi Optimization and Local Pressure Method for Measuring Supercritical CO2 Flow in Downhole

  • Chunfeng Zheng,
  • Wanyou Yang,
  • Dedong Xue,
  • Lei Kou and ,
  • Sheng Wang,
  • Zhengyang Chen,
  • Shijiao Jia and
  • Chao Yuan
  • + 3 authors+ 0 author

11 April 2025

This study is dedicated to exploring and verifying the application of a miniature Venturi sensor for measuring the flowrate of supercritical CO2 and associated gas in downhole environments. With the rapid development of CO2 gas injection technology a...

(This article belongs to the Section B3: Carbon Emission and Utilization)
  • Article
  • Open Access
18 Citations
5,404 Views
13 Pages

14 May 2020

Effective and reliable interconnections are crucial for microfluidics to connect with the macro world. Current microfluidic interfaces are still bulky, expensive, or with issues of clogging and material limitation. In this study, a novel ultraviolet...

(This article belongs to the Section Mechanical Engineering)
  • Proceeding Paper
  • Open Access
4 Citations
2,722 Views
7 Pages

26 October 2023

Fluidic thrust vectoring (FTV) control is a cutting-edge method used to manipulate the motion of an unmanned air vehicle when traditional control surfaces like elevators are not available. The primary purpose of employing FTV is to make the aircraft...

(This article belongs to the Proceedings of The 4th International Electronic Conference on Applied Sciences)
  • Article
  • Open Access
6 Citations
4,384 Views
19 Pages

Design and Rapid Prototyping of 3D-Printed Microfluidic Systems for Multiphase Flow

  • Bastian Oldach,
  • Robin Fortmann,
  • Theo Pleie,
  • Philip Timm and
  • Norbert Kockmann

21 November 2024

Since the emergence of microfluidic devices, subtractive manufacturing techniques have dominated their production. Although the conventional manufacturing processes are well established, they come along with some disadvantages that limit the accessib...

(This article belongs to the Special Issue A Themed Issue in Honor of Professor George Whitesides on the Occasion of His 85th Birthday Anniversary)
  • Article
  • Open Access
12 Citations
4,599 Views
16 Pages

14 October 2021

Rotor airfoil design involves multi-point and multi-objective complex constraints. How to significantly improve the maximum lift coefficient and lift-to-drag ratio of rotor airfoil is a fundamental problem, which should be solved urgently in the deve...

(This article belongs to the Section Aerospace Science and Engineering)
  • Article
  • Open Access
4 Citations
2,306 Views
13 Pages

AlN Production in Co-Flow Filtration Mode at Low Pressures

  • Nikolay Evseev,
  • Pavel Nikitin,
  • Mansur Ziatdinov,
  • Ilya Zhukov and
  • Alexei Vakutin

22 September 2021

In this work, the process for obtaining aluminum nitride in the combustion mode of co-flow filtration of a nitrogen–argon mixture was investigated. The combustion of granules consisting of aluminum and aluminum nitride as an inert diluent was studied...

  • Article
  • Open Access
4 Citations
1,051 Views
18 Pages

Pore-Scale Numerical Simulation of CO2 Miscible Displacement Behavior in Low-Permeability Oil Reservoirs

  • Tingting Li,
  • Suling Wang,
  • Jinbo Li,
  • Daobing Wang and ,
  • Zhiheng Tao and
  • Yue Wu
  • + 1 author+ 0 author

17 December 2025

CO2 miscible flooding provides dual advantages in enhancing oil recovery and facilitating geological sequestration, and has become a key technical approach for developing low-permeability oil reservoirs and carbon emission reduction. The pore-scale f...

(This article belongs to the Special Issue Hydrogen–Carbon Storage Technology and Optimization)
  • Article
  • Open Access
11 Citations
2,444 Views
15 Pages

6 October 2024

The structural-phase composition and tribological and performance properties of coatings based on an 86WC-10Co-4Cr composition obtained by the HVOF method at varying (150 L/min, 170 L/min, 190 L/min) oxygen flow rates were studied. The results showed...

(This article belongs to the Special Issue Advances in Thermal Spray Coatings: Technologies and Applications)
  • Article
  • Open Access
22 Citations
5,582 Views
13 Pages

28 August 2020

Reverse electrodialysis (RED) is one of the techniques able to harvest energy from the salinity gradient between different salt solutions. There is a tradeoff between efficiency and generated power in a RED stack. This paper focuses on efficiency. A...

(This article belongs to the Special Issue Electromembrane Processes: Emerging Applications, Materials and Process Configurations)
  • Article
  • Open Access
15 Citations
4,496 Views
20 Pages

1 August 2019

In this work, we are concerned with the theoretical and numerical analysis of the pressure build-up on the cap of an aquifer during CO2 injection in saturated porous rock formations in all flow regimes of the problem. The latter are specific regions...

(This article belongs to the Special Issue Computational Fluid Dynamics (CFD) 2018)
  • Article
  • Open Access
3 Citations
1,143 Views
20 Pages

16 February 2026

Two approaches are described for construction of a screen-printed planar electrode (SPE) for potentiometric determination of iodide ion. The first, involves preparation and application of iron(II) bathophenanthroline tetraiodoplumbate complex ([Fe(bp...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
23 Citations
4,984 Views
12 Pages

Dual Synthetic Jets Actuator and Its Applications—Part II: Novel Fluidic Thrust-Vectoring Method Based on Dual Synthetic Jets Actuator

  • Jie-Fu Liu,
  • Zhen-Bing Luo,
  • Xiong Deng,
  • Zhi-Jie Zhao and ,
  • Shi-Qing Li,
  • Qiang Liu and
  • Yin-Xin Zhu
  • + 2 authors+ 0 author

29 July 2022

A novel fluidic thrust-vectoring (FTV) control method based on dual synthetic jets actuator (DSJA) is proposed and evaluated. Numerical simulations are governed by the compressible Unsteady Reynolds-Averaged Navier–Stokes (URANS) equations. Acc...

(This article belongs to the Special Issue Active Flow Control: Recent Advances in Fundamentals and Applications)
  • Article
  • Open Access
453 Views
31 Pages

Co-Flow Jet (CFJ) technology is an effective active flow control method for improving aerodynamic performance by enhancing circulation and suppressing flow separation. However, existing CFJ airfoil optimization studies mainly focus on either aerodyna...

(This article belongs to the Special Issue Aerodynamic Optimization of Flight Wing)
  • Feature Paper
  • Article
  • Open Access
6 Citations
6,663 Views
22 Pages

29 July 2021

Reliable operation of lab-on-a-chip systems depends on user-friendly, precise, and predictable fluid management tailored to particular sub-tasks of the microfluidic process protocol and their required sample fluids. Pressure-driven flow control, wher...

(This article belongs to the Section Chemical Processes and Systems)
  • Feature Paper
  • Article
  • Open Access
16 Citations
6,313 Views
16 Pages

10 March 2020

Microfluidics has gained a lot of attention for biological sample separation and purification methods over recent years. From many active and passive microfluidic techniques, inertial microfluidics offers a simple and efficient method to demonstrate...

(This article belongs to the Special Issue Particles Separation in Microfluidic Devices)
  • Article
  • Open Access
1 Citations
1,388 Views
20 Pages

A Vortex-Induced Correction Method for Pressure Loss Prediction in Fluid Network Theory

  • Xiaoping Wang,
  • Liqiang Liang,
  • Qingsong Song,
  • Yunguang Ji and ,
  • Mingxu Sun and
  • Hongtao Li
  • + 1 author+ 0 author

14 February 2026

Traditional fluid network theory often underestimates pressure losses in complex pipe-bundle systems operating under vortex-dominated flow conditions, with deviations exceeding 20% in many cases. To address this limitation, this study proposes a vort...

(This article belongs to the Special Issue Industrial CFD and Fluid Modelling in Engineering, 3rd Edition)
  • Communication
  • Open Access
6 Citations
3,529 Views
12 Pages

2 September 2021

A new original method, applying a coaxial protective airflow, was tested aiming to improve the pure water jet efficiency in surface layer removal or medium hard materials cutting or blasting. The dual action of the air flow is expected: the air co-fl...

(This article belongs to the Special Issue Advanced Technology of Material Processing: Abrasive Water Jet Machining)
  • Article
  • Open Access
9 Citations
4,932 Views
16 Pages

High-Throughput Microfluidic Production of Ultrasmall Lecithin Nanoliposomes for High-Efficacy Transdermal Delivery and Skin-Aging Treatment

  • Xiao Liang,
  • Chan Lu,
  • Fangqiao Zheng,
  • Zhengyi Lan and ,
  • Haoji Wang,
  • Muhammad Shafiq,
  • Xinxin Pan,
  • Hangrong Chen and
  • Ming Ma
  • + 4 authors+ 0 author

Background: Liposome particles with smaller sizes could increase transdermal drug delivery efficacy for enhanced skin penetration. While microfluidic methods have enabled controlled liposome synthesis, achieving efficient production of ultrasmall nan...

(This article belongs to the Section Biomedical Engineering and Materials)
  • Article
  • Open Access
14 Citations
4,038 Views
14 Pages

21 July 2022

Red blood cell sedimentation has been used as a promising indicator of hematological diseases and disorders. However, to address several issues (i.e., syringe installation direction, blood on-off flow control, image-based quantification, and hemodilu...

(This article belongs to the Special Issue Microfluidics for Biomedical Applications)
  • Article
  • Open Access
12 Citations
4,463 Views
26 Pages

In Situ Detection of Interfacial Flow Instabilities in Polymer Co-Extrusion Using Optical Coherence Tomography and Ultrasonic Techniques

  • Alexander Hammer,
  • Wolfgang Roland,
  • Maximilian Zacher,
  • Bernhard Praher and ,
  • Günther Hannesschläger,
  • Bernhard Löw-Baselli and
  • Georg Steinbichler
  • + 2 authors+ 0 author

27 August 2021

Co-extrusion is a widely used processing technique for combining various polymers with different properties into a tailored multilayer product. Individual melt streams are combined in a die to form the desired shape. Under certain conditions, interfa...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
1 Citations
3,276 Views
18 Pages

25 August 2024

This paper employs social network analysis to investigate the characteristics and determinants of co-movement in the volatility of net cross-border capital flows. We have identified a significant “small-world” pattern in the co-movement n...

(This article belongs to the Section Sustainable Management)
  • Feature Paper
  • Article
  • Open Access
19 Citations
6,478 Views
11 Pages

Microfluidic Mixing and Analog On-Chip Concentration Control Using Fluidic Dielectrophoresis

  • Nicholas Mavrogiannis,
  • Mitchell Desmond,
  • Kenny Ling,
  • Xiaotong Fu and
  • Zachary Gagnon

23 November 2016

Microfluidic platforms capable of complex on-chip processing and liquid handling enable a wide variety of sensing, cellular, and material-related applications across a spectrum of disciplines in engineering and biology. However, there is a general la...

(This article belongs to the Special Issue Micro/Nano-Chip Electrokinetics)
  • Article
  • Open Access
7 Citations
1,754 Views
10 Pages

High-Quality Preparation of Energy-Containing Microspheres with Cross-Scale Particle Size

  • Jiang Liu,
  • Hairui Bian,
  • Guoqiang Yu,
  • Jiachao Zhang and ,
  • Yaozheng Wang,
  • Dang Ding,
  • Ning Sang and
  • Fangsheng Huang
  • + 3 authors+ 0 author

31 March 2025

Microfluidic granulation technology enables high-quality production of energy-containing microspheres, significantly enhancing both performance and safety. Although microfluidic methods allow control over microsphere particle size, the adjustment ran...

(This article belongs to the Section B: Biology and Biomedicine)
  • Review
  • Open Access
59 Citations
12,540 Views
40 Pages

Droplet Generation and Manipulation in Microfluidics: A Comprehensive Overview of Passive and Active Strategies

  • Andrea Fergola,
  • Alberto Ballesio,
  • Francesca Frascella,
  • Lucia Napione and ,
  • Matteo Cocuzza and
  • Simone Luigi Marasso
  • + 1 author+ 0 author

29 May 2025

Droplet-based microfluidics (DBM) has emerged as a powerful tool for a wide range of biochemical applications, from single-cell analysis and drug screening to diagnostics and tissue engineering. This review provides a comprehensive overview of the la...

(This article belongs to the Special Issue Micro/Nanofluidic System-Based Biosensors)
  • Article
  • Open Access
12 Citations
3,852 Views
20 Pages

21 October 2021

Making full use of wind energy can effectively alleviate the global energy shortage and environment contamination problems. Nevertheless, how to significantly improve the performance of the wind turbine airfoil and blade is a crucial issue. As the no...

  • Article
  • Open Access
3 Citations
1,402 Views
20 Pages

Numerical Study of Pulsation-Controlled Droplet Generation in a Microfluidic T-Junction

  • Alibek Kuljabekov,
  • Darezhat Bolysbek,
  • Zhibek Akasheva and
  • Zhumabek Zhantayev

15 November 2025

Droplet generation in microfluidic T-junctions is a key process in various chemical and biomedical applications requiring precise size and frequency control. This study presents a numerical investigation of pulsation-controlled droplet formation usin...

(This article belongs to the Section Process Control, Modeling and Optimization)
  • Review
  • Open Access
99 Citations
12,695 Views
34 Pages

Microfluidic Synthesis, Control, and Sensing of Magnetic Nanoparticles: A Review

  • Roozbeh Abedini-Nassab,
  • Mahrad Pouryosef Miandoab and
  • Merivan Şaşmaz

29 June 2021

Magnetic nanoparticles have attracted significant attention in various disciplines, including engineering and medicine. Microfluidic chips and lab-on-a-chip devices, with precise control over small volumes of fluids and tiny particles, are appropriat...

(This article belongs to the Special Issue MEMS Devices for Nanomanufacturing)
  • Review
  • Open Access
160 Citations
25,889 Views
34 Pages

Microfluidic Production of Multiple Emulsions

  • Goran T. Vladisavljević,
  • Ruqaya Al Nuumani and
  • Seyed Ali Nabavi

Microfluidic devices are promising tools for the production of monodispersed tuneable complex emulsions. This review highlights the advantages of microfluidics for the fabrication of emulsions and presents an overview of the microfluidic emulsificati...

(This article belongs to the Special Issue Droplet Microfluidics: Techniques and Technologies, Volume II)
  • Article
  • Open Access
8 Citations
4,196 Views
19 Pages

Due to the high reproduction rate of COVID-19, it is important to identify and isolate infected patients at the early stages of infection. The limitations of current diagnostic methods are speed, cost, and accuracy. Furthermore, new viral variants ha...

(This article belongs to the Special Issue Diagnosis, Characterization and Treatment of Emerging Pathogens)
  • Feature Paper
  • Article
  • Open Access
28 Citations
9,021 Views
14 Pages

5 February 2020

A two-phase flow axisymmetric numerical model was proposed to understand liquid metal droplet formation in a co-flowing capillary microfluidics device based on a phase field model. The droplet detachment processes were observed in the experiment and...

(This article belongs to the Special Issue Droplet Microfluidics)
  • Article
  • Open Access
24 Citations
5,527 Views
25 Pages

20 February 2020

To quantify the variation of red blood cells (RBCs) or plasma proteins in blood samples effectively, it is necessary to measure blood viscosity and erythrocyte sedimentation rate (ESR) simultaneously. Conventional microfluidic measurement methods req...

(This article belongs to the Special Issue Micro/Nano Devices for Blood Analysis, Volume II)
  • Article
  • Open Access
6 Citations
3,416 Views
19 Pages

Active Flow Control Technology Based on Simple Droop Devices and a Co-Flow Jet for Lift Enhancement

  • Jin Jiao,
  • Cheng Chen,
  • Bo Wang,
  • Pei Ying and ,
  • Qiong Wei and
  • Shengyang Nie
  • + 1 author+ 0 author

28 February 2025

The missions of modern aircraft require multiple abilities, such as highly efficient taking-off and landing, fast arrival, and long-endurance hovering. It is difficult to achieve all technical objectives using traditional aircraft design technology....

  • Article
  • Open Access
24 Citations
8,107 Views
26 Pages

26 October 2022

The Co-Flow Jet (CFJ) technique is an effective way to enhance the aerodynamics of airfoils. The present study is to comprehensively investigate the effects of CFJ key parameters, viz., the jet momentum coefficient, the injection slot location, the i...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
83 Citations
10,500 Views
25 Pages

2 June 2016

Dynamic stall control of a S809 airfoil is numerically investigated by implementing a co-flow jet (CFJ). The numerical methods of the solver are validated by comparing results with the baseline experiment as well as a NACA 6415-based CFJ experiment,...

(This article belongs to the Special Issue Modeling and Simulation for Wind Turbine Loads Analysis)
  • Article
  • Open Access
13 Citations
3,937 Views
28 Pages

Investigation and Improvement of Centrifugal Slurry Pump Wear Characteristics via CFD-DEM Coupling

  • Zengqiang Wang,
  • Guangjie Peng,
  • Hao Chang,
  • Shiming Hong and
  • Guangchao Ji

24 October 2024

Centrifugal slurry pumps are extensively applied in industrial industries such as power metallurgy, petrochemicals, deep-sea mining, and other industrial fields. The primary objective of this research is to assess how conveying settings and particle...

(This article belongs to the Special Issue Hydrodynamic Science Experiments and Simulations)
  • Review
  • Open Access
52 Citations
13,369 Views
33 Pages

Techniques of Fluidic Thrust Vectoring in Jet Engine Nozzles: A Review

  • Saadia Afridi,
  • Tariq Amin Khan,
  • Syed Irtiza Ali Shah,
  • Taimur Ali Shams and ,
  • Khawar Mohiuddin and
  • David John Kukulka
  • + 1 author+ 0 author

31 July 2023

Thrust vectoring innovations are demonstrated ideas that improve the projection of aerospace power with enhanced maneuverability, control effectiveness, survivability, performance, and stealth. Thrust vector control systems following a variety of con...

  • Article
  • Open Access
482 Views
12 Pages

6 July 2026

We present a one-dimensional shear-force-driven droplet formation model with a flux-based error estimator. The model is derived using asymptotic expansion and a front-tracking method to simulate the droplet interface. The model is then discretized us...

(This article belongs to the Collection Advances in Flow of Multiphase Fluids and Granular Materials)

of 37