Skip to Content

166 Results Found

  • Article
  • Open Access
392 Views
19 Pages

Enhancing Elemental Mercury Removal in Coal Combustion Flue-Gas over V2O5/TiO2-Based Catalysts via Coupled Oxidation and Sulfur-Assisted Fixation

  • Jiulong Zhang,
  • Jiao Liu,
  • Xinjian Han,
  • Weichao Xu and ,
  • Jiaxin Wang,
  • Zhiyuan Cheng,
  • Renhua Huang,
  • Qiangqiang Ren and
  • Wenrui Li
  • + 4 authors+ 0 author

31 August 2026

Elemental mercury (Hg0) removal in coal combustion flue-gas over commercial V-based SCR catalysts is still limited by insufficient low-temperature activity and the complex interference of gas components. In this work, V2O5/TiO2, V2O5−MoO3/TiO2,...

  • Feature Paper
  • Article
  • Open Access
3 Citations
2,665 Views
16 Pages

20 March 2024

Since the signing of the Minamata Convention in 2013, attempts have been primarily focused on reducing the emission of elemental mercury (Hg0) from coal-fired power plants (CFPPs). The most cost-effective measure for controlling the emission of mercu...

(This article belongs to the Section Environmental Catalysis)
  • Article
  • Open Access
66 Citations
4,399 Views
11 Pages

Effect of Ti Content on the Microstructure and Properties of CoCrFeNiMnTix High Entropy Alloy

  • Yuhua Chen,
  • Wenkuo Liu,
  • Hongwei Wang,
  • Jilin Xie and ,
  • Timing Zhang,
  • Limeng Yin and
  • Yongde Huang
  • + 2 authors+ 0 author

4 February 2022

The aim of this study was to investigate the effects of the Ti element addition on the microstructure and properties of CoCrFeNiMn high entropy alloys. The Ti element modified CoCrFeNiMnTix high entropy alloys were prepared by vacuum arc melting proc...

  • Article
  • Open Access
14 Citations
2,864 Views
19 Pages

The Role of Nitrogen-Doped TiO2 Supported by Platinum Catalyst Synthesized via Various Mode Preparations for Photocatalytic Enhancement

  • Nadiah Sabihah Natar,
  • Nureel Imanina Abdul Ghani,
  • Siti Raihan Hamzah,
  • Muhammad Afiq Rosli and ,
  • Nur Aien Muhamad,
  • Mohammad Saifulddin Azami,
  • Mohd Azlan Mohd Ishak,
  • Sharin Razak and
  • Wan Izhan Nawawi
  • + 4 authors+ 0 author

13 November 2022

The limitations of TiO2 as a photocatalyst such as the larger bandgap energy, which only activates under the UV region, give a lower photocatalytic activity. This study reports the role of the N and Pt co-dopant on the modification of the TiO2 photoc...

(This article belongs to the Section Energy and Catalysis)
  • Article
  • Open Access
11 Citations
3,426 Views
20 Pages

22 May 2022

The aim of the paper is to describe and specify the properties and microstructure of Al-Si alloy using Zr, a combination of Zr with elements used in the grafting of Al (Ti) alloys, and modification (Sr). Al-Si alloys with a combination of Zr and Ti a...

(This article belongs to the Special Issue Modern Foundry Materials and Technologies)
  • Article
  • Open Access
16 Citations
3,446 Views
16 Pages

Effect of Ag Modification on the Structure and Photocatalytic Performance of TiO2/Muscovite Composites

  • Fengqiu Qin,
  • Ling Zhang,
  • Yuhao Luo,
  • Lili He and ,
  • Shiji Lu,
  • Li Xu,
  • Xiaodong Zhu and
  • Wei Feng
  • + 3 authors+ 0 author

Ag/TiO2/muscovite (ATM) composites were prepared by the sol–gel method and the effects of Ag modification on the structure and photocatalytic performance were investigated. The photocatalysts were characterized using X-ray diffraction (XRD), sc...

(This article belongs to the Section Applied Chemistry)
  • Feature Paper
  • Article
  • Open Access
40 Citations
5,370 Views
19 Pages

Hydrothermal Synthesis of Rare-Earth Modified Titania: Influence on Phase Composition, Optical Properties, and Photocatalytic Activity

  • Nejc Rozman,
  • David M. Tobaldi,
  • Uroš Cvelbar,
  • Harinarayanan Puliyalil and ,
  • João A. Labrincha,
  • Andraž Legat and
  • Andrijana Sever Škapin
  • + 2 authors+ 0 author

28 February 2019

In order to expand the use of titania indoor as well as to increase its overall performance, narrowing the band gap is one of the possibilities to achieve this. Modifying with rare earths (REs) has been relatively unexplored, especially the modificat...

(This article belongs to the Special Issue Self-Cleaning Surfaces)
  • Article
  • Open Access
1 Citations
2,347 Views
12 Pages

Cross-Sectional Profile Evolution of Cu-Ti Gradient Films on C17200 Cu by Vacuum Thermal Diffusion

  • Yandan Zhu,
  • Zecheng Li,
  • Hongchao Bi,
  • Qilong Shi and ,
  • Yujun Han and
  • Quanli Zhang
  • + 1 author+ 0 author

12 November 2022

To improve the wear resistance and fatigue life of Cu alloys, surface modification by combining the magnetron sputtering of Ti film followed by vacuum thermal diffusion is always applied, where the structure and composition of the fabricated film pla...

(This article belongs to the Special Issue New Advances in Coatings and Surface Treatments for Cutting and Grinding Tools)
  • Review
  • Open Access
1 Citations
645 Views
39 Pages

30 June 2026

This review focuses on the effects of trace and residual rare-earth elements on inclusion evolution and Nb–Ti–V precipitation behavior in microalloyed steels. Existing studies indicate that trace rare-earth elements can transform conventi...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
21 Citations
3,351 Views
19 Pages

Study on the Surface Modification of Nanostructured Ti Alloys and Coarse-Grained Ti Alloys

  • Hsuan-Kai Lin,
  • Yi-Hong Cheng,
  • Guan-Yuan Li,
  • Ying-Chi Chen and ,
  • Piotr Bazarnik,
  • Jessica Muzy,
  • Yi Huang and
  • Terence G. Langdon
  • + 3 authors+ 0 author

31 May 2022

Commercial purity titanium (CP-Ti) and a Ti-6Al-4V alloy (Ti64) were processed by high-pressure torsion (HPT) for 10 and 20 turns. The HPT processing produced a nanostructured microstructure and a significant strength enhancement in the CP-Ti and Ti6...

(This article belongs to the Section Entropic Alloys and Meta-Metals)
  • Article
  • Open Access
30 Citations
5,404 Views
16 Pages

Evaluation of the Microstructure and Mechanical Properties of a New Modified Cast and Laser-Melted AA7075 Alloy

  • Asmaa M. Khalil,
  • Irina S. Loginova,
  • Andrey V. Pozdniakov,
  • Ahmed O. Mosleh and
  • Alexey N. Solonin

20 October 2019

The mechanical properties and microstructure of as-cast and homogenized AA7075 were investigated. This alloy was modified by adding transition elements 0.3%Sc + 0.5%Zr, 1%Ti + 0.2%B, and 1%Fe + 1%Ni for use in additive manufacturing applications. Aft...

  • Review
  • Open Access
7 Citations
2,685 Views
16 Pages

Recent Advances and Challenges in Ti-Based Oxide Anodes for Superior Potassium Storage

  • Qinglin Deng,
  • Yang Zhao,
  • Xuhui Zhu,
  • Kaishuai Yang and
  • Mai Li

11 September 2023

Developing high-performance anodes is one of the most effective ways to improve the energy storage performances of potassium-ion batteries (PIBs). Among them, Ti-based oxides, including TiO2, K2Ti6O13, K2Ti4O9, K2Ti8O17, Li4Ti5O12, etc., as the intri...

(This article belongs to the Section Energy and Catalysis)
  • Article
  • Open Access
33 Citations
4,242 Views
16 Pages

Combined Effects of Polydopamine-Assisted Copper Immobilization on 3D-Printed Porous Ti6Al4V Scaffold for Angiogenic and Osteogenic Bone Regeneration

  • Hsi-Yao Wu,
  • Yen-Hong Lin,
  • Alvin Kai-Xing Lee,
  • Ting-You Kuo and ,
  • Chun-Hao Tsai and
  • Ming-You Shie
  • + 1 author+ 0 author

9 September 2022

Numerous studies have demonstrated that biological compounds and trace elements such as dopamine (DA) and copper ions (Cu) could be modified onto the surfaces of scaffolds using a one-step immersion process which is simple, inexpensive and, most impo...

(This article belongs to the Section Cell Methods)
  • Article
  • Open Access
22 Citations
4,919 Views
14 Pages

18 January 2019

Rare earth elements are plentiful in Gannan area, China, and there is a large amount of wastewater from all kinds of mines. In this paper, rare-earth modification TiO2 composites (RE/TiO2, RE = La, Ce, Gd, Yb) was studied by theory computation and ex...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
921 Views
13 Pages

Our earlier X-ray and neutron scattering data on TiO2-P2O5 glasses with minor Al2O3 impurities are re-examined with some modifications, which is followed by a comparison with recent results. It is reported that triply coordinated oxygens in the TiO6...

(This article belongs to the Collection Feature Paper Collection of Optical Materials)
  • Article
  • Open Access
2 Citations
3,151 Views
12 Pages

6 January 2025

Nitride films such as tantalum nitride (TaN), titanium nitride (TiN) and boron nitride (BN) are widely used in aerospace and vacuum electronics. The electron emitting properties of these nitride films are of great interest due to the phenomenon of su...

(This article belongs to the Special Issue Advanced Nanostructured Coatings Deposited by Magnetron Sputtering)
  • Article
  • Open Access
81 Citations
16,783 Views
13 Pages

Stress-Strain Curves and Modified Material Constitutive Model for Ti-6Al-4V over the Wide Ranges of Strain Rate and Temperature

  • Xin Hou,
  • Zhanqiang Liu,
  • Bing Wang,
  • Woyun Lv and ,
  • Xiaoliang Liang and
  • Yang Hua
  • + 1 author+ 0 author

2 June 2018

The mechanical properties of Ti-6Al-4V alloy are sensitive to strain rate and temperature load. The finite element simulation results of high-speed machining Ti-6Al-4V alloy depend on the accurate description of dynamic deformation. However, it is ha...

  • Review
  • Open Access
20 Citations
4,587 Views
14 Pages

Functionalization of TiO2 for Better Performance as Orthopedic Implants

  • Sehrish Noreen,
  • Engui Wang,
  • Hongqing Feng and
  • Zhou Li

3 October 2022

This review mainly focuses on the surface functionalization approaches of titanium dioxide (TiO2) to prevent bacterial infections and facilitate osteointegration simultaneously for titanium (Ti)-based orthopedic implants. Infection is one of the majo...

(This article belongs to the Special Issue Frontiers in Functional Materials for Bioelectronics and Biosensors)
  • Article
  • Open Access
16 Citations
3,953 Views
15 Pages

The anatase/rutile mixed crystal TiO2 was prepared and modified with Ag decoration and SnO2 coupling to construct a Ag@SnO2/anatase/rutile composite photocatalytic material. The crystal structure, morphology, element valence, optical properties and s...

  • Review
  • Open Access
65 Citations
7,848 Views
19 Pages

β-Ti Alloys for Orthopedic and Dental Applications: A Review of Progress on Improvement of Properties through Surface Modification

  • Longfei Shao,
  • Yiheng Du,
  • Kun Dai,
  • Hong Wu and ,
  • Qingge Wang,
  • Jia Liu,
  • Yujin Tang and
  • Liqiang Wang
  • + 3 authors+ 0 author

25 November 2021

Ti and Ti alloys have charming comprehensive properties (high specific strength, strong corrosion resistance, and excellent biocompatibility) that make them the ideal choice in orthopedic and dental applications, especially in the particular fabricat...

(This article belongs to the Special Issue Surface Modification Technology of Biomedical Metals)
  • Article
  • Open Access
4 Citations
1,024 Views
12 Pages

In Situ Hydrogel Growth on Flame-Sprayed Hydroxyapatite (HA)/TiO2-Coated Stainless Steel via TiO2-Photoinitiated Polymerization

  • Komsanti Chokethawai,
  • Nattawit Yutimit,
  • Burin Boonsri,
  • Parkpoom Jarupoom and ,
  • Ketmanee Muangchan,
  • Sahadsawat Tonkaew,
  • Pongpen Kaewdee,
  • Sujitra Tandorn and
  • Chamnan Randorn
  • + 4 authors+ 0 author

18 October 2025

Hydroxyapatite (HA) coatings improve implant bioactivity but suffer from brittleness and limited functionality. Here, we report a hybrid coating strategy combining flame-sprayed HA/TiO2 with in situ hydrogel growth. TiO2 incorporated into the HA matr...

(This article belongs to the Special Issue Hydrogels for Bone Regeneration (2nd Edition))
  • Article
  • Open Access
14 Citations
2,700 Views
15 Pages

30 July 2021

Synthetic rutile was prepared from titanium slag melt with low energy consumption and a small amount of additive (B2O3) in our previous work. The modification mechanism of titanium slag was not clear enough. The migration and enrichment behaviors of...

(This article belongs to the Special Issue 2D Crystalline Monolayer Nanosheets)
  • Article
  • Open Access
12 Citations
3,352 Views
12 Pages

In Vitro Study of Zirconia Surface Modification for Dental Implants by Atomic Layer Deposition

  • Tatsuhide Hayashi,
  • Masaki Asakura,
  • Shin Koie,
  • Shogo Hasegawa and ,
  • Akimichi Mieki,
  • Koki Aimu and
  • Tatsushi Kawai
  • + 2 authors+ 0 author

Zirconia is a promising material for dental implants; however, an appropriate surface modification procedure has not yet been identified. Atomic layer deposition (ALD) is a nanotechnology that deposits thin films of metal oxides or metals on material...

(This article belongs to the Section Materials Science)
  • Communication
  • Open Access
6 Citations
3,407 Views
10 Pages

Influence of Annealing Temperature on Corrosion Resistance of TiO2 Nanotubes Grown on Ti–30Ta Alloy

  • Patricia Capellato,
  • Daniela Sachs,
  • Filipe Bueno Vilela,
  • Mirian M. Melo and ,
  • Gilbert Silva,
  • Geovani Rodrigues,
  • Cecilia A. de C. Zavaglia,
  • Roberto Z. Nakazato and
  • Ana Paula R. A. Claro
  • + 4 authors+ 0 author

18 August 2020

With little success, researchers has been searching for alloys with elements such as tantalum to improve the long-term life of implants. The Ti–30Ta alloy presents an elastic modulus E = 69 GPa that is close to that of bone (E = 17–25 GPa...

  • Article
  • Open Access
7 Citations
2,069 Views
16 Pages

11 August 2023

Ti3AlC2 three-layered ceramics-reinforced copper matrix composites show not only the strength of the copper matrix but also better wear resistance, all while preserving its conductive property and, ultimately, reducing the cost of preparation. Howeve...

(This article belongs to the Special Issue Deposition, Characterization and Application of Anti-corrosion and Lubricating Coatings)
  • Feature Paper
  • Review
  • Open Access
35 Citations
8,685 Views
21 Pages

Visible-Light-Activated TiO2-Based Photocatalysts for the Inactivation of Pathogenic Bacteria

  • Farhana Haque,
  • Allison Blanchard,
  • Baileigh Laipply and
  • Xiuli Dong

25 November 2024

Pathogenic bacteria in the environment pose a significant threat to public health. Titanium dioxide (TiO2)-based photocatalysts have emerged as a promising solution due to their potent antimicrobial effects under visible light and their generally eco...

(This article belongs to the Special Issue Photocatalysis towards a Sustainable Future)
  • Article
  • Open Access
38 Citations
5,510 Views
14 Pages

XPS Characterization of TiO2 Nanotubes Growth on the Surface of the Ti15Zr15Mo Alloy for Biomedical Applications

  • Reginaldo Toshihiro Konatu,
  • Danielle Duque Domingues,
  • Rodrigo França and
  • Ana Paula Rosifini Alves

Ti15Zr15Mo (TMZ alloy) has been studied in recent years for biomedical applications, mainly due to phase beta formation. From the surface modification, it is possible to associate the volume and surface properties with a better biomedical response. T...

(This article belongs to the Section Dental Biomaterials)
  • Review
  • Open Access
20 Citations
4,526 Views
18 Pages

20 June 2021

Ti-Al alloys have good prospects in the aerospace, automobile, and other fields because of their excellent mechanical properties. However, the lack of high temperature oxidation resistance limits their practical applications. Various ways have been u...

  • Article
  • Open Access
13 Citations
2,611 Views
20 Pages

Water lubrication has been widely used in marine equipment, where rubber bearings and seals suffer intense friction and severe wear under mixed and boundary conditions. It has good research prospects and practical value to study the composite of amor...

(This article belongs to the Special Issue Tribology and Mechanical Behavior of Amorphous Carbon Coatings)
  • Article
  • Open Access
19 Citations
3,662 Views
12 Pages

Microfiltration Membranes Modified with Composition of Titanium Oxide and Silver Oxide by Magnetron Sputtering

  • Joanna Kacprzyńska-Gołacka,
  • Monika Łożyńska,
  • Wioletta Barszcz,
  • Sylwia Sowa and ,
  • Piotr Wieciński and
  • Ewa Woskowicz
  • + 1 author+ 0 author

31 December 2020

In this work, the authors present the possibility of modification of polymer membranes by TiO2 + AgO coating created by the magnetron sputtering method. The two-component TiO2 + AgO coating can improve and shape new functional properties such as bact...

(This article belongs to the Special Issue Advances in Plasma Processes for Polymers)
  • Review
  • Open Access
148 Citations
29,805 Views
36 Pages

The lithium ion battery (LIB) has proven to be a very reliably used system to store electrical energy, for either mobile or stationary applications. Among others, TiO2-based anodes are the most attractive candidates for building safe and durable lith...

  • Article
  • Open Access
2 Citations
1,921 Views
16 Pages

Parameter Equivalence and Impedance Characteristics of NiTi Wires Embedded in Nitrile Butadiene Rubber Based on Secondary Bridging Model

  • Yizhe Huang,
  • Xipeng Luo,
  • Huizhen Zhang,
  • Jun Wang and ,
  • Bin Huang,
  • Zhifu Zhang,
  • Qibai Huang and
  • Xin Zhan
  • + 3 authors+ 0 author

17 July 2024

This article presents a metal matrix composite material consisting of NiTi wires embedded in nitrile butadiene rubber (NBR) that preserves NBR’s inherent acoustic characteristics while enabling acoustic modification through the NiTi phase trans...

  • Article
  • Open Access
13 Citations
3,666 Views
22 Pages

Assessment of Titanate Nanolayers in Terms of Their Physicochemical and Biological Properties

  • Michalina Ehlert,
  • Aleksandra Radtke,
  • Katarzyna Roszek,
  • Tomasz Jędrzejewski and
  • Piotr Piszczek

8 February 2021

The surface modification of titanium substrates and its alloys in order to improve their osseointegration properties is one of widely studied issues related to the design and production of modern orthopedic and dental implants. In this paper, we disc...

(This article belongs to the Special Issue Titania-Based Materials for Medical Applications)
  • Article
  • Open Access
34 Citations
4,089 Views
12 Pages

Surface Characterization of New β Ti-25Ta-Zr-Nb Alloys Modified by Micro-Arc Oxidation

  • Pedro Akira Bazaglia Kuroda,
  • Carlos Roberto Grandini and
  • Conrado Ramos Moreira Afonso

15 March 2023

The technique of surface modification using electrolytic oxidation, called micro-arc oxidation (MAO), has been used in altering the surface properties of titanium alloys for biomedical purposes, enhancing their characteristics as an implant (biocompa...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
17 Citations
6,037 Views
12 Pages

Improvement of Properties of Stainless Steel Orthodontic Archwire Using TiO2:Ag Coating

  • Zofia Kielan-Grabowska,
  • Justyna Bącela,
  • Anna Zięty,
  • Wioletta Seremak and ,
  • Marta Gawlik-Maj,
  • Beata Kawala,
  • Beata Borak,
  • Jerzy Detyna and
  • Michał Sarul
  • + 4 authors+ 0 author

18 September 2021

Orthodontic treatment carries the risk of major complications such as enamel demineralization, tooth decay, gingivitis, and periodontal damage. A large number of elements of fixed orthodontic appliance results in the creation of additional plaque ret...

(This article belongs to the Special Issue Symmetry Applied in Biomechanics and Mechanical Engineering)
  • Article
  • Open Access
3 Citations
2,949 Views
14 Pages

Design Factors of Ti-Base Abutments Related to the Biomechanics Behavior of Dental Implant Prostheses: Finite Element Analysis and Validation via In Vitro Load Creeping Tests

  • Jordi Martínez-Grau,
  • Daniel Robles,
  • Román A. Pérez,
  • Xavier Marimon and ,
  • Saray Fernández-Hernández,
  • Carlos Aroso and
  • Aritza Brizuela-Velasco
  • + 2 authors+ 0 author

29 July 2024

This study has been carried out to analyze the influence of the design of three geometric elements (wall thickness, platform width, and chamfer) of Ti-base abutments on the distribution of stresses and strains on the implant, the retention screw, the...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
12 Citations
3,049 Views
16 Pages

6 September 2021

In this study, the composite of silica-based sandwich-layered zirconium-titanium phosphate was prepared by a layer-by-layer grafting method and its adsorption properties in a diluted solution of Ni ions were specifically researched by the bath experi...

  • Article
  • Open Access
6 Citations
2,813 Views
18 Pages

Modulating Osteoclast Activity and Immune Responses with Ultra-Low-Dose Silver Nanoparticle-Loaded TiO2 Nanotubes for Osteoporotic Bone Regeneration

  • Zhen Wang,
  • Penghui Xiang,
  • Zhe Xu,
  • Meiqi Gu and ,
  • Rui Zhang,
  • Yifei Li,
  • Fei Xin and
  • Chengla Yi
  • + 3 authors+ 0 author

Introduction: Osteoporosis results from the dysregulation of osteoclast activation mechanisms. The subsequent inflammation in osteoporotic environments further hampers bone healing and impedes osseointegration. Therefore, developing treatments that c...

(This article belongs to the Special Issue Antibacterial Biomaterials for Medical Applications)
  • Article
  • Open Access
4 Citations
2,253 Views
16 Pages

22 November 2023

Unmodified hypoeutectic silumins have a microstructure composed of large-sized phases, which are the reason for their low mechanical properties. Many years of research have shown the modifying effects of many chemical elements and their compounds, in...

(This article belongs to the Section Aerospace Science and Engineering)
  • Article
  • Open Access
6 Citations
2,052 Views
12 Pages

26 July 2023

Aluminum–silicon alloys require modification due to their coarse-grained microstructures and resulting low strength properties. So far, research into the modification process has focused on the use of various chemical components and technologic...

(This article belongs to the Special Issue The Abrasive Wear Processes of Modern Materials Used in Working Elements)
  • Article
  • Open Access
17 Citations
3,842 Views
22 Pages

The Influence of Hybrid Surface Modification on the Selected Properties of CP Titanium Grade II Manufactured by Selective Laser Melting

  • Anna Woźniak,
  • Marcin Adamiak,
  • Grzegorz Chladek,
  • Mirosław Bonek and ,
  • Witold Walke and
  • Oktawian Bialas
  • + 1 author+ 0 author

24 June 2020

The human body is an extremely aggressive environment in terms of corrosion. Titanium and its alloys are one of the most popular biomaterials used for implant applications due to biocompatibility. However, every element introduced into the body is tr...

(This article belongs to the Special Issue Advances in Laser Surface Treated Steels and Light Metal Alloys)
  • Article
  • Open Access
1,992 Views
29 Pages

Mineral Geochemistry of Sulfides and Oxides and Its Implications for Ore-Forming Mechanisms in the Northeast Saveh Epithermal System, Central Urumieh–Dokhtar Magmatic Arc, Iran

  • Mohammad Goudarzi,
  • Hassan Zamanian,
  • Urs Klötzli,
  • Alireza Almasi and ,
  • Sara Houshmand-Manavi and
  • Jiranan Homnan
  • + 1 author+ 0 author

19 February 2026

We have investigated the major- and trace-element composition of hydrothermal pyrite, magnetite, and Ti-magnetite, and of the principal Cu-minerals chalcopyrite and chalcocite, to constrain ore-forming processes in the northeastern Saveh district (ce...

(This article belongs to the Special Issue Igneous Rocks and Related Mineral Deposits)
  • Review
  • Open Access
183 Citations
17,121 Views
35 Pages

N–TiO2 Photocatalysts: A Review of Their Characteristics and Capacity for Emerging Contaminants Removal

  • João Gomes,
  • João Lincho,
  • Eva Domingues,
  • Rosa M. Quinta-Ferreira and
  • Rui C. Martins

21 February 2019

Titanium dioxide is the most used photocatalyst in wastewater treatment; its semiconductor capacity allows the indirect production of reactive oxidative species. The main drawback of the application of TiO2 is related to its high band-gap energy. The...

(This article belongs to the Special Issue Advanced Oxidation Technologies in Industrial Wastewater Treatment)
  • Article
  • Open Access
7 Citations
3,532 Views
12 Pages

30 March 2022

Based on the generalized gradient approximation of density functional theory, the geometric structure and electronic properties of the intrinsic Ti3C2 and Cu-, Pt-, Co-, Si-, F-, Cl- or Br-doped Ti3C2 are optimized, and the adsorption process of HCHO...

(This article belongs to the Section Computational Catalysis)
  • Article
  • Open Access
2,176 Views
21 Pages

Effect of Nb Content on the Microstructure and Properties of Laser-Clad NiTi-Based Coatings

  • Zhaowei Yang,
  • Ying Zhang,
  • Guoli Li,
  • Kun Li and ,
  • Long Jiang,
  • Qingkai Fan and
  • Kang Qi
  • + 2 authors+ 0 author

Laser cladding has attracted considerable attention for titanium alloy surface modification owing to its high energy density, rapid cooling rate, and excellent metallurgical bonding capability. To investigate the effect of Nb content on the microstru...

  • Article
  • Open Access
14 Citations
3,909 Views
17 Pages

Biocompatibility and Microstructure-Based Stress Analyses of TiNbZrTa Composite Films

  • Bo-Wei Lai,
  • Yin-Yu Chang,
  • Tzong-Ming Shieh and
  • Heng-Li Huang

21 December 2021

Background: the clinical application of orthopedic or dental implants improves the quality of the lives of patients. However, the long-term use of implants may lead to implant loosening and related complications. The purpose of this study is to depos...

(This article belongs to the Special Issue Prospects for Dental Materials in Prosthodontics)
  • Article
  • Open Access
10 Citations
5,111 Views
20 Pages

Synthesis and Sintering of Tungsten and Titanium Carbide: A Parametric Study

  • Alma Terlikbaeva,
  • Aliya Alimzhanova,
  • Zhanna Eremeeva,
  • Anar Mukhametzhanova and ,
  • Galimzhan Maldybaev,
  • Roza Shayahmetova,
  • Mohammad Abedi and
  • Dmitry Moskovskikh
  • + 3 authors+ 0 author

14 December 2022

The three primary steps in the production of tungsten carbide WC and titanium carbide TiC powders are the preparation of the green mixture, carbidization by furnace annealing, and ball milling of the annealed products. This work performed a comprehen...

(This article belongs to the Section Powder Metallurgy)
  • Article
  • Open Access
191 Views
22 Pages

Influence of Europium Doping on the Electrical Properties of Ba0.9Ca0.1TiO3 Ceramics

  • Dawid Kurczek,
  • Jolanta Makowska,
  • Tomasz Pikula,
  • Rafał Panek and ,
  • Grzegorz Tytko,
  • Małgorzata Karolus and
  • Małgorzata Adamczyk-Habrajska
  • + 2 authors+ 0 author

19 October 2026

Eu-doped Ba0.9Ca0.1TiO3 (BCT10) ceramics with the nominal composition (Ba0.9-xEuxCa0.1)TiO3, where x = 0–0.025, were prepared by the conventional solid-state reaction method. X-ray diffraction analysis and Rietveld refinement revealed a predomi...

(This article belongs to the Special Issue The Parameters of Advanced Materials)
  • Article
  • Open Access
13 Citations
3,214 Views
15 Pages

Selected Physicochemical Properties of Diamond Like Carbon (DLC) Coating on Ti-13Nb-13Zr Alloy Used for Blood Contacting Implants

  • Magdalena Antonowicz,
  • Roksana Kurpanik,
  • Witold Walke,
  • Marcin Basiaga and ,
  • Jozef Sondor and
  • Zbigniew Paszenda
  • + 1 author+ 0 author

11 November 2020

Despite high interest in the issues of hemocompatibility of titanium implants, particularly those made of the Ti-13Nb-13Zr alloy, the applied methods of surface modification still do not always guarantee the physicochemical properties required for th...

(This article belongs to the Special Issue Fabrication and Machining of Metal Matrix Composites)
  • Article
  • Open Access
2 Citations
3,504 Views
10 Pages

Investigation on Blood Compatibility of Cu/Ti Metal Coating Prepared via Various Bias Voltages and Copper Content

  • Qiong Hu,
  • Hengquan Liu,
  • Fei Gao,
  • Xi Yang and ,
  • Junfeng Li,
  • Ren Liu,
  • Zexuan Liu and
  • Dongfang Wang
  • + 3 authors+ 0 author

1 March 2022

Surface modification of some metal coatings is usually used to improve the blood compatibility of biomaterials; however, some aspects of the bological properties of metal coatings cannot be adjusted via the content of each component. In this work, Cu...

(This article belongs to the Special Issue Advances in Stability of Metallic Implants)

of 4