Skip to Content

1,637 Results Found

  • Article
  • Open Access
118 Citations
10,349 Views
18 Pages

Crystallinity and β Phase Fraction of PVDF in Biaxially Stretched PVDF/PMMA Films

  • Ye Zhou,
  • Wenting Liu,
  • Bin Tan,
  • Cheng Zhu and ,
  • Yaru Ni,
  • Liang Fang,
  • Chunhua Lu and
  • Zhongzi Xu
  • + 3 authors+ 0 author

24 March 2021

Polyvinylidene fluoride (PVDF) and poly(methyl methacrylate) (PMMA) blend films were prepared using biaxial stretching. The effects of PMMA content and stretching ratio on the crystallinity and β phase fraction of PVDF in blend films were investigate...

(This article belongs to the Section Polymer Processing and Engineering)
  • Review
  • Open Access
410 Citations
41,598 Views
42 Pages

A Review of Piezoelectric PVDF Film by Electrospinning and Its Applications

  • Gulnur Kalimuldina,
  • Nursultan Turdakyn,
  • Ingkar Abay,
  • Alisher Medeubayev and ,
  • Arailym Nurpeissova,
  • Desmond Adair and
  • Zhumabay Bakenov
  • + 2 authors+ 0 author

12 September 2020

With the increase of interest in the application of piezoelectric polyvinylidene fluoride (PVDF) in nanogenerators (NGs), sensors, and microdevices, the most efficient and suitable methods of their synthesis are being pursued. Electrospinning is an e...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
22 Citations
9,782 Views
17 Pages

Improved Permeate Flux of PVDF Ultrafiltration Membrane Containing PVDF-g-PHEA Synthesized via ATRP

  • Kwang-Mo Kim,
  • Sahng Hyuck Woo,
  • Ju Sung Lee,
  • Hyun Sic Park and ,
  • Jinwon Park and
  • Byoung Ryul Min
  • + 1 author+ 0 author

21 December 2015

Polyvinylidene fluoride (PVDF) ultrafiltration (UF) membrane combined with polyvinylidene fluoride-graft-2-hydroxyethyl acrylate (PVDF-g-PHEA) was fabricated via non-solvent induced phase separation (NIPS). In this study, PVDF-g-PHEA was synthesized...

(This article belongs to the Special Issue Organo-Fluorine Chemical Science)
  • Article
  • Open Access
39 Citations
6,813 Views
10 Pages

With the development of human healthcare devices, smart sensors, e-skins, and pressure sensors with outstanding sensitivity, flexibility, durability and biocompatibility have attracted more and more attention. In this paper, to develop a novel flexib...

(This article belongs to the Section B: Biology and Biomedicine)
  • Article
  • Open Access
16 Citations
4,856 Views
21 Pages

A Flexible PVDF Sensor for Forcecardiography

  • Salvatore Parlato,
  • Jessica Centracchio,
  • Eliana Cinotti,
  • Gaetano D. Gargiulo and ,
  • Daniele Esposito,
  • Paolo Bifulco and
  • Emilio Andreozzi
  • + 2 authors+ 0 author

6 March 2025

Forcecardiography (FCG) uses force sensors to record the mechanical vibrations induced on the chest wall by cardiac and respiratory activities. FCG is usually performed via piezoelectric lead-zirconate titanate (PZT) sensors, which simultaneously rec...

(This article belongs to the Special Issue Sensors for Heart Rate Monitoring and Cardiovascular Disease)
  • Article
  • Open Access
6 Citations
1,629 Views
18 Pages

Adsorption of Methylene Blue on PVDF Membrane and PVDF/TiO2 Hybrid Membrane: Batch and Cross-Flow Filtration Studies

  • Fengmei Shi,
  • Boming Fan,
  • Shuqi Ma,
  • Hao Lv and ,
  • Chao Lin,
  • Jin Ma,
  • Wei Jiang and
  • Yuxin Ma
  • + 3 authors+ 0 author

16 January 2026

The adsorption of methylene blue (MB) on poly(vinylidene fluoride) (PVDF) and PVDF/titanium dioxide(TiO2) membranes with 1.5 wt% dosage was examined through batch adsorption and dynamic cross-flow filtration experiments. The effects of pH, temperatur...

(This article belongs to the Section Polymer Membranes and Films)
  • Proceeding Paper
  • Open Access
2,105 Views
7 Pages

Application of PVDF Gauges in Solid Interface

  • Zhifang Deng,
  • Ruoze Xie,
  • Fangju Zhang and
  • Gang Chen

It’s difficult to directly measure the pressure on the surface of the material in the impact process. PVDF (Polyvinylidene Fluoride) gauges may help to solve this problem. In this paper, some split Hopkinson pressure bar (SHPB) experiments were carri...

(This article belongs to the Proceedings of The 18th International Conference on Experimental Mechanics)
  • Communication
  • Open Access
37 Citations
6,952 Views
8 Pages

Mechanical Fatigue Resistance of Piezoelectric PVDF Polymers

  • Youn-Hwan Shin,
  • Inki Jung,
  • Hyunchul Park,
  • Jung Joon Pyeon and ,
  • Jeong Gon Son,
  • Chong Min Koo,
  • Sangtae Kim and
  • Chong-Yun Kang
  • + 3 authors+ 0 author

4 October 2018

The fatigue resistance of piezoelectric PVDF has been under question in recent years. While some report that a significant degradation occurs after 106 cycles of repeated voltage input, others report that the reported degradation originates from the...

(This article belongs to the Special Issue Nanogenerators in Korea)
  • Article
  • Open Access
12 Citations
3,557 Views
13 Pages

Electrical Detection of Vibrations of Electrospun PVDF Membranes

  • Petr Slobodian,
  • Robert Olejnik,
  • Jiri Matyas,
  • Berenika Hausnerova and ,
  • Pavel Riha,
  • Romana Danova and
  • Dusan Kimmer
  • + 2 authors+ 0 author

18 November 2022

We prepared electroactive PVDF membranes, which were subjected to mechanical as well as dual electro–mechanical signals and their responses were detected by the evoked electrical pulses. The aim was to obtain primarily electric energy that coul...

(This article belongs to the Collection Frontiers in Polymeric Materials)
  • Article
  • Open Access
21 Citations
3,388 Views
13 Pages

Superhydrophobic and Corrosion Behaviour of PVDF-CeO2 Composite Coatings

  • Sayed M. Saleh,
  • Fahad M. Alminderej and
  • Adel M. A. Mohamed

5 December 2022

Composite coatings of polyvinylidene fluoride (PVDF)/CeO2 were developed by using the spray approach to explore the wetting and corrosion behaviour of coated materials for applications related to industry. PVDF was combined with different quantities...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
22 Citations
5,229 Views
11 Pages

Preparation of PVDF/PAR Composites with Piezoelectric Properties by Post-Treatment

  • Woo Jin Oh,
  • Hyeon Soo Lim,
  • Jong Sung Won and
  • Seung Goo Lee

3 December 2018

Thermoplastic composites were prepared using poly (vinylidene fluoride) (PVDF) as the matrix with piezoelectric properties and aromatic polyarylate (PAR) as the reinforcing component. The PVDF/PAR conjugate fibers were prepared by melt conjugate spin...

(This article belongs to the Special Issue Aromatic Polymers)
  • Article
  • Open Access
48 Citations
6,233 Views
14 Pages

Triboelectric Response of Electrospun Stratified PVDF and PA Structures

  • Pavel Tofel,
  • Klára Částková,
  • David Říha,
  • Dinara Sobola and ,
  • Nikola Papež,
  • Jaroslav Kaštyl,
  • Ştefan Ţălu and
  • Zdeněk Hadaš
  • + 3 authors+ 0 author

22 January 2022

Utilizing the triboelectric effect of the fibrous structure, a very low cost and straightforward sensor or an energy harvester can be obtained. A device of this kind can be flexible and, moreover, it can exhibit a better output performance than a dev...

(This article belongs to the Special Issue Preparation and Application of Polymer Nanocomposites)
  • Article
  • Open Access
39 Citations
11,366 Views
30 Pages

14 February 2012

In this paper, a PVDF film sensor was used to measure the transient responses of a cantilever beam subjected to an impact loading. The measurement capability of a PVDF sensor is affected by the area of the PVDF film sensor and the signal conditioner...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
53 Citations
7,156 Views
13 Pages

13 August 2020

Low power production and unstable power supply are important bottlenecks restricting the application of microbial fuel cells (MFCs). It is necessary to explore effective methods to improve MFC performance. By using molasses wastewater as fuel, carbon...

  • Communication
  • Open Access
7 Citations
5,216 Views
8 Pages

28 January 2021

Heat generation in active/passive layer-based piezoelectric actuators is unavoidable due to the mechanical, dielectric, and resistive losses in the material. In this work, a polyvinylidene fluoride (PVDF)-based unimorph cantilever actuator is develop...

(This article belongs to the Section Smart and Functional Polymers)
  • Article
  • Open Access
90 Citations
12,008 Views
11 Pages

A Capacitive Humidity Sensor Based on an Electrospun PVDF/Graphene Membrane

  • Daniel Hernández-Rivera,
  • Grissel Rodríguez-Roldán,
  • Rodrigo Mora-Martínez and
  • Ernesto Suaste-Gómez

3 May 2017

Humidity sensors have been widely used in areas such as agriculture, environmental conservation, medicine, instrumentation and climatology. Hydrophobicity is one of the important factors in capacitive humidity sensors: recent research has shown that...

(This article belongs to the Special Issue Humidity Sensors)
  • Communication
  • Open Access
28 Citations
7,850 Views
9 Pages

Tunable In Situ 3D-Printed PVDF-TrFE Piezoelectric Arrays

  • Alec Ikei,
  • James Wissman,
  • Kaushik Sampath,
  • Gregory Yesner and
  • Syed N. Qadri

24 July 2021

In the functional 3D-printing field, poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE) has been shown to be a more promising choice of material over polyvinylidene fluoride (PVDF), due to its ability to be poled to a high level of piezoelect...

(This article belongs to the Section Sensor Materials)
  • Article
  • Open Access
5 Citations
2,358 Views
17 Pages

Preparation and Self-Cleaning Performance of High-Strength Double-Layer PVDF-PVC-Nano-Graphite/PVDF-PVC Super-Hydrophobic Composite Membrane

  • Dashuai Zhang,
  • Shishu Sun,
  • Yan Zhang,
  • Xiaopeng Zhang and ,
  • Chen Li,
  • Tianyi Sun,
  • Linhua Zhu and
  • Zaifeng Shi
  • + 3 authors+ 0 author

28 November 2023

The double-layer PVDF-PVC (D-PP/PP) super-hydrophobic composite membrane was prepared by the coating immersion phase separation method to enhance the mechanical properties of the composite membrane. The D-PP/PP super-hydrophobic membrane was prepared...

  • Article
  • Open Access
73 Citations
11,998 Views
10 Pages

Characteristics of PVDF Membranes Irradiated by Electron Beam

  • Babak Jaleh,
  • Negin Gavary,
  • Parisa Fakhri,
  • Nakatan Muensit and
  • Soheil Mohammad Taheri

5 January 2015

Polyvinylidene fluoride (PVDF) membranes were exposed vertically to a high energy electron beam (EB) in air, at room temperature. The chemical changes were examined by Fourier Transform Infrared Spectroscopy (FTIR). The surface morphologies were stud...

(This article belongs to the Section Membrane Analysis and Characterization)
  • Article
  • Open Access
8 Citations
3,504 Views
11 Pages

The Aging Performance of PVDF in Acid Oil and Gas Medium

  • Guoquan Qi,
  • Hongxia Yan,
  • Dongtao Qi,
  • Houbu Li and
  • Zhao Zhang

10 October 2022

In the process of transporting oil and gas, the service performance of thermoplastic pipes will decline due to the multiple influences of medium, temperature, and pressure. In order to study the service performance changes of PVDF pipes under oil and...

(This article belongs to the Special Issue Development of Functional Polymer Composites)
  • Article
  • Open Access
3 Citations
1,454 Views
13 Pages

Research on Repolarization Characteristic of PVDF Strain Sensor Used in Smart Tires

  • Yingxin Han,
  • Yahui Tian,
  • Ruitao Tang,
  • Bo Lu and
  • Mingliang Song

Piezoelectric polyvinylidene fluoride (PVDF) film sensors embedded in a tire can make the tire have a sense of tactile. Thus, PVDF strain sensors play an important role in smart tires. However, temperature tolerance of PVDF is a key issue limiting it...

  • Article
  • Open Access
50 Citations
7,662 Views
13 Pages

6 April 2019

To measure the flow velocity of a fluid without affecting its motion state, a method was proposed based on a polyvinylidene fluoride (PVDF) piezoelectric film sensor. A self-made PVDF piezoelectric sensor placed parallel with the flow direction was u...

(This article belongs to the Special Issue Advances in Flow and Wind Sensors)
  • Review
  • Open Access
75 Citations
9,756 Views
18 Pages

20 October 2021

In recent years, great progress has been made in the field of energy harvesting to satisfy increasing needs for portable, sustainable, and renewable energy. Among piezoelectric materials, poly(vinylidene fluoride) (PVDF) and its copolymers are the mo...

(This article belongs to the Special Issue Self-Powered Smart Systems)
  • Article
  • Open Access
37 Citations
7,147 Views
8 Pages

13 April 2017

Polypropylene (PP) and polyvinylidene fluoride (PVDF) polymer materials have been widely used because PP has excellent piezoelectricity and PVDF has a robust tensile strength. However, few studies have been reported about PP/PVDF blends, and the main...

  • Article
  • Open Access
52 Citations
8,116 Views
9 Pages

PMN-PT/PVDF Nanocomposite for High Output Nanogenerator Applications

  • Chuan Li,
  • Wenbo Luo,
  • Xingzhao Liu,
  • Dong Xu and
  • Kai He

The 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3(0.7PMN-0.3PT) nanorods were obtained via hydrothermal method with high yield (over 78%). Then, new piezoelectric nanocomposites based on (1−x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 (PMN-PT) nanorods were fabricated by dispersing t...

(This article belongs to the Special Issue Multifunctional Polymer-Based Nanocomposites)
  • Article
  • Open Access
72 Citations
12,598 Views
19 Pages

Assessment of Blend PVDF Membranes, and the Effect of Polymer Concentration and Blend Composition

  • Imtiaz Ali,
  • Omar A. Bamaga,
  • Lassaad Gzara,
  • M. Bassyouni and ,
  • M. H. Abdel-Aziz,
  • M. F. Soliman,
  • Enrico Drioli and
  • Mohammed Albeirutty
  • + 3 authors+ 0 author

In this work, PVDF homopolymer was blended with PVDF-co-HFP copolymer and studied in terms of morphology, porosity, pore size, hydrophobicity, permeability, and mechanical properties. Different solvents, namely N-Methyl-2 pyrrolidone (NMP), Tetrahydr...

  • Article
  • Open Access
66 Citations
14,687 Views
15 Pages

27 February 2014

In this study, the polyvinylidene fluoride (PVDF) hollow fiber hemodialysis membranes were prepared by non-solvent induced phase separation (NIPS). The influences of PVDF membrane thickness and polyethylene glycol (PEG) content on membrane morphologi...

(This article belongs to the Special Issue Selected Papers from AMS8 Conference (July 2013, Xi’an, China))
  • Article
  • Open Access
11 Citations
2,716 Views
14 Pages

PVDF/TiO2 composite membranes show some potential to be used for water treatment as they combine the advantages of polymers and ceramics. However, conventional PVDF-based composite membranes are always fabricated by using conventional toxic solvents....

(This article belongs to the Special Issue New Trends in Membrane Technologies for Removal of Hazardous Pollutants)
  • Article
  • Open Access
9 Citations
4,127 Views
11 Pages

Wet-Chemical Synthesis of TiO2/PVDF Membrane for Energy Applications

  • Muhammad Saleem,
  • Munirah D. Albaqami,
  • Aboud Ahmed Awadh Bahajjaj,
  • Fahim Ahmed and ,
  • ElSayed Din,
  • Waqas Ul Arifeen and
  • Shafaqat Ali
  • + 2 authors+ 0 author

29 December 2022

To satisfy the ever-increasing energy demands, it is of the utmost importance to develop electrochemical materials capable of producing and storing energy in a highly efficient manner. Titanium dioxide (TiO2) has recently emerged as a promising choic...

(This article belongs to the Section Materials Chemistry)
  • Review
  • Open Access
264 Citations
23,561 Views
16 Pages

Tactile-Sensing Based on Flexible PVDF Nanofibers via Electrospinning: A Review

  • Xiaomei Wang,
  • Fazhe Sun,
  • Guangchao Yin,
  • Yuting Wang and ,
  • Bo Liu and
  • Mingdong Dong
  • + 1 author+ 0 author

24 January 2018

The flexible tactile sensor has attracted widespread attention because of its great flexibility, high sensitivity, and large workable range. It can be integrated into clothing, electronic skin, or mounted on to human skin. Various nanostructured mate...

(This article belongs to the Special Issue Tactile Sensors and Sensing)
  • Article
  • Open Access
127 Views
14 Pages

10 November 2026

Flexoelectricity-enhanced photovoltaic (FPV) effect has emerged as one of the significant research interests. In this investigation, we found it for the first time that the bandgap modulation effect played a critical role on the FPV effect of poly (v...

(This article belongs to the Section Smart and Functional Polymers)
  • Article
  • Open Access
34 Citations
4,734 Views
20 Pages

Structure Tuning and Electrical Properties of Mixed PVDF and Nylon Nanofibers

  • Petr Černohorský,
  • Tatiana Pisarenko,
  • Nikola Papež,
  • Dinara Sobola and ,
  • Ştefan Ţălu,
  • Klára Částková,
  • Jaroslav Kaštyl,
  • Robert Macků,
  • Pavel Škarvada and
  • Petr Sedlák
  • + 5 authors+ 0 author

15 October 2021

The paper specifies the electrostatic spinning process of specific polymeric materials, such as polyvinylidene fluoride (PVDF), polyamide-6 (PA6, Nylon-6) and their combination PVDF/PA6. By combining nanofibers from two different materials during the...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
3 Citations
1,985 Views
15 Pages

A Novel PVDF Ultrafiltration Membrane Modified by C60(OH)n-Ag

  • Jie Zhang,
  • Wenjun Zhao,
  • Chengyang Shi,
  • Liman Zhao and ,
  • Yudi Chu,
  • Yanan Ren,
  • Qun Wang,
  • Yanxia Chi and
  • Shujing Zhou
  • + 4 authors+ 0 author

29 November 2024

Ultrafiltration membranes in the fields of water treatment and biomedicine should have high permeability as well as antibacterial and antifouling capabilities. In this study, based on the hydrophilicity of fullerol (C60(OH)n) and the bacteriostatic p...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
38 Citations
10,362 Views
19 Pages

Using Annealing Treatment on Fabrication Ionic Liquid-Based PVDF Films

  • Yung Ting,
  • Suprapto,
  • Naveen Bunekar,
  • Kulandaivel Sivasankar and
  • Yopan Rahmad Aldori

3 January 2020

In this study, a simple method to obtain pure β-phase directly from the melt process is proposed. A series of PVDF and ionic liquid (IL) was prepared by a solvent casting method with appropriate associated with the subsequent annealing treatment...

(This article belongs to the Special Issue Ferroelectric Thin Films and Devices)
  • Article
  • Open Access
88 Citations
15,753 Views
11 Pages

Role of PVDF in Rheology and Microstructure of NCM Cathode Slurries for Lithium-Ion Battery

  • Sang Hoon Sung,
  • Sunhyung Kim,
  • Jeong Hoon Park,
  • Jun Dong Park and
  • Kyung Hyun Ahn

13 October 2020

A binder plays a critical role in dispersion of coating liquids and the quality of coating. Poly(vinylidene fluoride) (PVDF) is widely used as a binder in cathode slurries; however, its role as a binder is still under debate. In this paper, we study...

(This article belongs to the Special Issue Functional Coating Materials and Processing for Platform Technology)
  • Article
  • Open Access
7 Citations
4,614 Views
8 Pages

Memristive Properties of PANI-Polysterene/PVDF-TrFE Interface

  • Artem V. Budaev,
  • Roman N. Belenkov and
  • Nikita A. Emelianov

The article presents the results of an experimental study of the transport of charge carriers through semiconductor PANI-polystyrene/ ferroelectric PVDF-TrFE interface. Current-voltage characteristics of the structure under study have a typical form...

  • Article
  • Open Access
4 Citations
3,465 Views
12 Pages

14 February 2023

This paper reports a series of experimental and modeling investigations on two piezoelectric arrays made of polyvinylidene fluoride (PVDF) films. They were embedded inside rubber cylinders and used to directly measure the internal stresses generated...

(This article belongs to the Topic Piezoelectric Materials and Applications)
  • Article
  • Open Access
10 Citations
5,350 Views
14 Pages

The Influence of DMSO on PVA/PVDF Hydrogel Properties: From Materials to Sensors Applications

  • Giada D’Altri,
  • Angelica Giovagnoli,
  • Valentina Di Matteo,
  • Lamyea Yeasmin and ,
  • Stefano Scurti,
  • Isacco Gualandi,
  • Maria Cristina Cassani,
  • Silvia Panzavolta,
  • Mariangela Rea and
  • Barbara Ballarin
  • + 6 authors+ 1 author

13 February 2025

This research study aims to explore the synergistic effects of incorporating polyvinylidene fluoride (PVDF) into polyvinyl alcohol (PVA) hydrogels to enhance their suitability for triboelectric sensors applications. The preparation process employs a...

(This article belongs to the Special Issue Application of Smart Gel Material in Flexible and Wearable Electronics)
  • Article
  • Open Access
42 Citations
6,842 Views
15 Pages

Dynamic Mechanical and Creep Behaviour of Meltspun PVDF Nanocomposite Fibers

  • Fatemeh Mokhtari,
  • Geoffrey M. Spinks,
  • Sepidar Sayyar and
  • Javad Foroughi

23 August 2021

Piezoelectric fibers have an important role in wearable technology as energy generators and sensors. A series of hybrid nanocomposite piezoelectric fibers of polyinylidene fluoride (PVDF) loaded with barium–titanium oxide (BT) and reduced graphene ox...

(This article belongs to the Section Nanoelectronics, Nanosensors and Devices)
  • Article
  • Open Access
21 Citations
4,320 Views
14 Pages

Performance of Sprayed PVDF-Al2O3 Composite Coating for Industrial and Civil Applications

  • Adel M. A. Mohamed,
  • Hosam Hasan,
  • Mohamed M. El-Sayed Seleman,
  • Essam Ahmed and ,
  • Sayed M. Saleh and
  • Rehab M. El-Maghraby
  • + 1 author+ 0 author

24 October 2021

Because of their great water repellency, Superhydrophobic coatings have a major impact on a variety of industrial applications. The current study’s key originality is the development of low-cost, stable, superhydrophobic, and corrosion-resistant comp...

(This article belongs to the Section Soft Matter)
  • Article
  • Open Access
13 Citations
6,960 Views
16 Pages

Flux and Passage Enhancement in Hemodialysis by Incorporating Compound Additive into PVDF Polymer Matrix

  • Qinglei Zhang,
  • Xiaolong Lu,
  • Qingzhao Zhang,
  • Lei Zhang and ,
  • Suoding Li and
  • Shaobin Liu
  • + 1 author+ 0 author

19 October 2016

In this study, Polyvinylidene fluoride (PVDF) hollow fiber hemodialysis membranes were prepared by non-solvent induced phase separation (NIPS) with compound addtive. The compound additive was made with polyvinyl pyrrolidone (PVP) and Poly ethylene gl...

  • Article
  • Open Access
6 Citations
3,991 Views
13 Pages

Fabrication of Piezoelectric PVDF/PAR Composites Using a Sheath-Core Fiber Method

  • Min Hong Jeon,
  • Yu Rim Lee,
  • Hyeon Soo Lim,
  • Jong Sung Won and
  • Seung Goo Lee

27 September 2020

We report the preparation of sheath-core type fibers made from poly(vinylidene fluoride) (PVDF) and polyarylate (PAR) using melt conjugate spinning to fabricate piezolectric composites. The morphology of this sheath-core fiber was determined through...

(This article belongs to the Section Polymer Chemistry)
  • Article
  • Open Access
14 Citations
3,375 Views
14 Pages

Effect of Perchlorate on Combustion Properties of Directly-Written Al/PVDF Composites

  • Jingwei Li,
  • Xuwen Liu,
  • Quanmin Xie,
  • Jiaxin Su and ,
  • Maocong Hu and
  • Zhenhua Yao
  • + 1 author+ 0 author

8 March 2023

Metastable intermolecular composites (MICs) based on Al/PVDF have become one of the most important materials in the field of additive manufacturing of energetic materials due to their high energy density and designability. In this work, the energy ut...

  • Feature Paper
  • Article
  • Open Access
6 Citations
3,661 Views
13 Pages

Photolithographically Home-Made PVDF Sensor for Cavitation Impact Load Measurement

  • Jan Hujer,
  • Petra Dančová,
  • Tomáš Kořínek and
  • Miloš Müller

30 September 2021

Piezoelectric PVDF sensors offer a unique option for the measurement of cavitation aggressiveness represented by the magnitude of impacts due to cavitation bubble collapses near walls. The aggressiveness measurement requires specific sensor shape and...

(This article belongs to the Special Issue Experimental and Numerical Methods in Fluid Mechanics and Energy)
  • Article
  • Open Access
11 Citations
4,631 Views
15 Pages

Nanocomposite PVDF Membrane for Battery Separator Prepared via Hot Pressing

  • Lukáš Plesník,
  • Karla Čech Barabaszová,
  • Sylva Holešová,
  • Pavlína Peikertová and ,
  • Gražyna Simha Martynková and
  • Damian Stanislaw Nakonieczny
  • + 1 author+ 0 author

Polyvinylidene fluoride (PVDF) is one of the materials most commonly used in membrane separators. The structures of pristine PVDF and PVDF nanocomposite films were processed via hot pressing at 140 °C, 170 °C, and 185 °C at a pressure of...

(This article belongs to the Section Battery Materials and Interfaces: Anode, Cathode, Separators and Electrolytes or Others)
  • Article
  • Open Access
1,898 Views
16 Pages

Nanomaterial Enhanced PVDF Mixed Matrix Membranes for Microfluidic Electrochemical Desalination

  • Haya Taleb,
  • Gopal Venkatesh,
  • Sofian Kanan,
  • Raed Hashaikeh and ,
  • Nidal Hilal and
  • Naif Darwish
  • + 1 author+ 0 author

2 February 2026

This work provides a systematic experimental study for the electrochemical desalination of saline water using an electrospun permselective polyvinylidene difluoride (PVDF) membrane. Several nano additives were initially screened during membrane devel...

(This article belongs to the Special Issue Sustainable Advances in Oil & Gas, Mining, and Environmental Technologies: Innovations in Membrane and Porous Material Technologies)
  • Article
  • Open Access
62 Citations
6,395 Views
15 Pages

PVDF Fibers Modification by Nitrate Salts Doping

  • Dinara Sobola,
  • Pavel Kaspar,
  • Klára Částková,
  • Rashid Dallaev and ,
  • Nikola Papež,
  • Petr Sedlák,
  • Tomáš Trčka,
  • Farid Orudzhev,
  • Jaroslav Kaštyl and
  • Vladimír Holcman
  • + 7 authors+ 2 authors

24 July 2021

The method of inclusion of various additives into a polymer depends highly on the material in question and the desired effect. In the case of this paper, nitride salts were introduced into polyvinylidene fluoride fibers prepared by electrospinning. T...

(This article belongs to the Section Polymer Fibers)
  • Review
  • Open Access
90 Citations
11,765 Views
29 Pages

18 December 2023

The highest energy conversion efficiencies are typically shown by lead-containing piezoelectric materials, but the harmful environmental impacts of lead and its toxicity limit future use. At the bulk scale, lead-based piezoelectric materials have sig...

(This article belongs to the Section Nanocomposite Materials)
  • Article
  • Open Access
6 Citations
3,728 Views
17 Pages

Corona Poling Enabling Gravure Printing of Electroactive Flexible PVDF-TrFE Devices

  • Giuliano Sico,
  • Maria Montanino,
  • Fausta Loffredo,
  • Carmela Borriello and
  • Riccardo Miscioscia

25 December 2024

Polyvinylidene fluoride (PVDF)-based materials are the most researched polymers in the field of energy harvesting. Their production in thin-film form through printing technologies can potentially offer several manufacturing and performance advantages...

(This article belongs to the Section Energy Materials)
  • Article
  • Open Access
60 Citations
4,422 Views
13 Pages

Preparation and Optical Properties of PVDF-CaFe2O4 Polymer Nanocomposite Films

  • Sultan Alhassan,
  • Majed Alshammari,
  • Khulaif Alshammari,
  • Turki Alotaibi and ,
  • Alhulw H. Alshammari,
  • Yasir Fawaz,
  • Taha Abdel Mohaymen Taha and
  • Mohamed Henini
  • + 3 authors+ 0 author

8 May 2023

In this work, a synthesis technique for highly homogeneous PVDF-CaFe2O4 polymer films direct from solution was developed. The structural characterizations were conducted using XRD, FTIR, and ESEM experimental techniques. The XRD characteristic peaks...

(This article belongs to the Section Polymer Applications)

of 33