Skip to Content

108 Results Found

  • Article
  • Open Access
13 Citations
3,574 Views
10 Pages

The structural properties and whiteness of the substrate surface markedly effect printing quality and are closely related to the primer coating processes. Herein, four different roller coating schemes were applied on MDF surfaces to change their stru...

  • Article
  • Open Access
27 Citations
6,185 Views
17 Pages

Microstructure, Texture, Electrical and Mechanical Properties of AA-6063 Processed by Multi Directional Forging

  • Alireza Dashti,
  • Mohammad Hossein Shaeri,
  • Reza Taghiabadi,
  • Faramarz Djavanroodi and ,
  • Farzaneh Vali Ghazvini and
  • Hamid Javadi
  • + 1 author+ 0 author

29 November 2018

In current research, the effect of the multi-directional forging (MDF) process on the microstructure, texture, mechanical and electrical properties of AA-6063 under different heat treatment conditions at various MDF temperatures was studied. The anne...

  • Article
  • Open Access
25 Citations
2,604 Views
20 Pages

27 July 2023

Wood-based composites are increasingly used in the industry not only because of the shortage of solid wood, but above all because of the better properties, such as high strength and aesthetic appearance compared to wood. Medium-density fiberboard (MD...

(This article belongs to the Special Issue Material Surfaces and Interactions: Structure, Properties, Processes and Applications)
  • Article
  • Open Access
497 Views
36 Pages

Inspection-Oriented Predictive Quality Modeling for MDF Manufacturing Using Industrial Process Data and Machine Learning

  • Roberto Aedo-García,
  • Miguel A. C. Valdebenito-Chavez,
  • Silvia E. Restrepo-Medina,
  • Gerson Rojas Espinoza and ,
  • Javier Zarate Bertoglio and
  • Francisco Ramis-Lanyon
  • + 1 author+ 0 author

11 August 2026

Continuous medium-density fiberboard (MDF) production presents a persistent quality-assurance problem: destructive laboratory tests return results too late to prevent off-specification material from accumulating before a corrective response is possib...

(This article belongs to the Section Artificial Intelligence and Digital Systems Engineering)
  • Article
  • Open Access
13 Citations
2,356 Views
19 Pages

16 November 2023

Most of the parts of furniture made of medium density fiberboards (MDF) require at least one hole to be assembled. The drilling technological parameters influence the quality of holes. Factors such as tip angle of the drill bit, feed rate, type and d...

(This article belongs to the Special Issue Wood Quality and Wood Processing)
  • Article
  • Open Access
6 Citations
6,659 Views
15 Pages

7 November 2012

This paper is the third part of a study dealing with the mechanical and fracture mechanical characterization of Medium Density Fiberboards (MDF). In the first part, an analysis of internal bond strength testing was performed and in the second part MD...

(This article belongs to the Special Issue Creep and Fracture of Engineering Materials and Structures)
  • Article
  • Open Access
1 Citations
355 Views
14 Pages

Automatic Assessment of Tool Wear Condition During Milling of Laminated MDF Board Using the EVA-02 Classifier

  • Jarosław Górski,
  • Katarzyna Śmietańska,
  • Marcin Bator,
  • Krzysztof Gajowniczek and
  • Robert Budzyński

30 June 2026

The main objective of this study was to conduct initial evaluations of the performance of a classifier utilizing the EVA-02 model, which was designed to identify tool wear states by analyzing scanned images of machined, melamine-faced MDF workpieces...

(This article belongs to the Special Issue New Insights into Wood Cutting and Wood Processing)
  • Article
  • Open Access
11 Citations
3,704 Views
11 Pages

Constitutive Model and Microstructure Evolution Finite Element Simulation of Multidirectional Forging for GH4169 Superalloy

  • Yongbo Jin,
  • Chenyang Xi,
  • Peng Xue,
  • Chunxiang Zhang and ,
  • Sirui Wang and
  • Junting Luo
  • + 1 author+ 0 author

21 December 2020

This study investigates three processes of multidirectional forging (MDF), namely, closed MDF (CMDF), single-open MDF, and double-open MDF, by using a constitutive equation and a dynamic recrystallization model of hot deformation of the GH4169 supera...

(This article belongs to the Special Issue Modeling and Simulation of Metal Processing)
  • Review
  • Open Access
15 Citations
5,760 Views
21 Pages

26 November 2024

Magnesium (Mg) and its alloys are currently the lightest structural metals in engineering applications, widely used in aerospace, defense technology, transportation and electronic 3C fields. Plastic deformation is a commonly used method to improve th...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
8 Citations
2,753 Views
12 Pages

8 February 2022

Fast growing Eucalyptus grandis W. Hill ex Maiden (EG), E. amplifolia Naudin (EA), Corymbia torelliana (F.Muell.) K.D.Hill & L.A.S.Johnson (CT), and Populus deltoides W.Bartram ex Marshall (PD) may be deployed in Short Rotation Woody Crop (SRWC)...

(This article belongs to the Special Issue Tree Improvement for Promising New Forest Products and Applications)
  • Article
  • Open Access
18 Citations
3,407 Views
17 Pages

The Impact of Hydrolysis Regime on the Physical and Mechanical Characteristics of Medium-Density Fiberboards Manufactured from Recycled Wood Fibers

  • Viktor Savov,
  • Petar Antov,
  • Christian Panchev,
  • Muhammad Adly Rahandi Lubis and ,
  • Hamid R. Taghiyari,
  • Seng Hua Lee,
  • Ľuboš Krišťák and
  • Martina Todorova
  • + 3 authors+ 0 author

1 December 2023

Recycling medium-density fiberboards (MDF) presents notable technological challenges, primarily due to the deteriorated properties of the recycled wood fibers obtained from MDF waste. On the other hand, the enhanced valorization of recycled wood in t...

  • Article
  • Open Access
17 Citations
3,822 Views
15 Pages

Particle Stimulated Nucleation Effect for Al-Mg-Zr-Sc Alloys with Ni Addition during Multidirectional Forging

  • Mikhail S. Kishchik,
  • Andrey G. Mochugovskiy,
  • Maxence Cuda,
  • Anna A. Kishchik and
  • Anastasia V. Mikhaylovskaya

21 August 2023

The study aims to investigate the influence of fraction of coarse undeformed particles on the microstructure evolution and mechanical properties of alloys processed by isothermal multidirectional forging (MDF). For this purpose, Al-Mg-Ni-Sc-Zr-based...

(This article belongs to the Special Issue Feature Papers in Crystallography and Applications of Metallic Materials)
  • Article
  • Open Access
13 Citations
3,770 Views
12 Pages

Effect of Hydrolysis Regime on the Properties of Fibers Obtained from Recycling Medium-Density Fiberboards

  • Viktor Savov,
  • Petar Antov,
  • Christian Panchev,
  • Muhammad Adly Rahandi Lubis and ,
  • Seng Hua Lee,
  • Hamid R. Taghiyari,
  • Martina Todorova and
  • Stoyko Petrin
  • + 3 authors+ 0 author

17 July 2023

Unlike the recycling of particleboards, the recycling of medium-density fiberboards (MDF) is not a widespread industrial practice, and currently, most waste MDF panels are landfilled or incinerated after the end of their life cycle. Therefore, it is...

  • Article
  • Open Access
15 Citations
3,252 Views
11 Pages

30 May 2023

An eco-friendly medium-density fiberboard (MDF) was prepared using vanillin (V) crosslinked chitosan (CS) adhesive through a hot-pressing process. The cross-linking mechanism and the effect of different proportions of added chitosan/vanillin on the m...

(This article belongs to the Section Circular and Green Sustainable Polymer Science)
  • Article
  • Open Access
39 Citations
6,642 Views
20 Pages

Fractionation of Waste MDF by Steam Refining

  • Sebastian Hagel and
  • Bodo Saake

In view of the expected increase in available waste medium-density fiberboard (MDF) and the current insufficient and unsatisfactory disposal capacities, efficient ways of recycling the waste material need to be developed. In this study, the potential...

(This article belongs to the Special Issue Biorefineries)
  • Article
  • Open Access
1 Citations
2,746 Views
8 Pages

Resistance of Untreated and Torrefied Medium-Density Fiberboard (MDF) Residues to Xylophage Fungi

  • Paula Gabriella Surdi,
  • Vinicius Resende de Castro,
  • Nidia Niela Lima,
  • Gabriel Reis Portilho and ,
  • Nayara Franzini Lopes,
  • Frances Alves Andrade,
  • Antônio José Vinha Zanuncio,
  • José Cola Zanuncio,
  • Angélica de Cássia Oliveira Carneiro and
  • Solange de Oliveira Araújo
  • + 5 authors+ 0 author

4 February 2023

The manufacture of wood panels generates a large amount of waste. This material can be an option for renewable energy generation. However, long-term storage, exposure to moisture and contact of these panels with the soil facilitate colonization by xy...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
1 Citations
1,966 Views
16 Pages

2 November 2024

Sanding in medium-density fiberboard (MDF) often encounters unstable quality and premature failure, primarily because there is currently no abrasive belt specifically suitable for MDF sanding characteristics. We designed two precision-shaped abrasive...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
28 Citations
5,777 Views
19 Pages

Quality Control of the Continuous Hot Pressing Process of Medium Density Fiberboard Using Fuzzy Failure Mode and Effects Analysis

  • Yunlei Lv,
  • Yaqiu Liu,
  • Weipeng Jing,
  • Marcin Woźniak and ,
  • Robertas Damaševičius,
  • Rafał Scherer and
  • Wei Wei
  • + 2 authors+ 0 author

3 July 2020

In this paper, a fuzzy failure mode and effects analysis (FMEA) method is proposed by combining fault theory and a failure analysis method. The method addresses the problem of board thickness control failure and the problem of thickness deviation def...

(This article belongs to the Section Computing and Artificial Intelligence)
  • Article
  • Open Access
6 Citations
2,244 Views
14 Pages

A novel pretreatment strategy utilizing a combination of NaOH and 1-Butyl-3-methylimidazolium chloride ([Bmim]Cl) was proposed to enhance the enzymatic hydrolysis of abandoned Medium-density fiberboard (MDF). The synergistic effect of NaOH and [Bmim]...

  • Article
  • Open Access
41 Citations
6,883 Views
16 Pages

Green Binder Based on Enzymatically Polymerized Eucalypt Kraft Lignin for Fiberboard Manufacturing: A Preliminary Study

  • Susana Gouveia,
  • Luis Alberto Otero,
  • Carmen Fernández-Costas,
  • Daniel Filgueira and ,
  • Ángeles Sanromán and
  • Diego Moldes
  • + 1 author+ 0 author

9 June 2018

The capability of laccase from Myceliophthora thermophila to drive oxidative polymerization of Eucalyptus globulus Kraft lignin (KL) was studied as a previous step before applying this biotechnological approach for the manufacturing of medium-density...

(This article belongs to the Special Issue Polymers from Renewable Resources)
  • Article
  • Open Access
11 Citations
3,003 Views
13 Pages

26 December 2022

Multidrug resistance poses a major challenge to antibiotic therapy. A principal cause of antibiotic resistance is through active export by efflux pumps embedded in the bacterial membrane. Major facilitator superfamily (MFS) efflux pumps constitute a...

(This article belongs to the Section Molecular Biophysics)
  • Article
  • Open Access
1 Citations
714 Views
18 Pages

Sustainable Polysulfone Composite Membranes Incorporating Medium-Density Fiberboard Residue for Dairy Effluent Remediation

  • Bruna Naiara Silva de Oliveira Almeida,
  • Rafael Agra Dias,
  • Pamela Thainara Vieira da Silva,
  • Renê Anisio da Paz and ,
  • Bruna Aline Araujo,
  • Carlos Bruno Barreto Luna,
  • Renate Maria Ramos Wellen and
  • Edcleide Maria Araújo
  • + 3 authors+ 0 author

15 April 2026

The global shift toward sustainable industrial processes has increased the demand for advanced materials capable of performing under harsh conditions, with high-temperature polymer nanocomposites emerging as a key development area. This study investi...

(This article belongs to the Special Issue Sustainable Materials for Energy Industry: High-Temperature Polymer Nanocomposites)
  • Article
  • Open Access
6 Citations
2,865 Views
5 Pages

30 March 2021

Poultry is a crucial global protein source.However, processing creates sizable quantities of feathers as a by-product. Identifying suitable uses for these feathers poses a major challenge. One possible use would be as an extender in medium density fi...

(This article belongs to the Collection Advanced Technologies in Wood Science)
  • Article
  • Open Access
30 Citations
5,450 Views
15 Pages

Granulometric Characterization of Wood Dust Emission from CNC Machining of Natural Wood and Medium Density Fiberboard

  • Richard Kminiak,
  • Martin Kučerka,
  • Lubos Kristak,
  • Roman Reh and ,
  • Petar Antov,
  • Alena Očkajová,
  • Tomasz Rogoziński and
  • Marta Pędzik
  • + 3 authors+ 0 author

5 August 2021

The aim of this paper was to determine the particle size composition of wood dust emission from CNC milling of natural wood and medium-density fiberboard (MDF) and evaluate the associated occupational exposure risks. The paper is focused on some of t...

(This article belongs to the Special Issue Wood Production and Promotion)
  • Article
  • Open Access
18 Citations
5,077 Views
11 Pages

Effect of Multi-Directional Forging on the Microstructure and Mechanical Properties of β-Solidifying TiAl Alloy

  • Ning Cui,
  • Qianqian Wu,
  • Kexiao Bi,
  • Jin Wang and ,
  • Tiewei Xu and
  • Fantao Kong
  • + 1 author+ 0 author

28 April 2019

This study systematically investigated the influence of multi-directional forging (MDF) on the microstructural evolution, hot deformation behavior, and tensile properties of a β-solidifying TiAl alloy. The initial lamellar microstructure of an as-cas...

(This article belongs to the Special Issue Advanced Technology for Materials Synthesis and Processing)
  • Article
  • Open Access
18 Citations
5,207 Views
14 Pages

Investigating the Sanding Process of Medium-Density Fiberboard and Korean Pine for Material Removal and Surface Creation

  • Jian Zhang,
  • Junhua Ying,
  • Feng Cheng,
  • Hongguang Liu and ,
  • Bin Luo and
  • Li Li
  • + 1 author+ 0 author

22 November 2018

As an important fine machining method, sanding operation is widely used in most engineered materials. In wood sanding, high material removal rate and surface quality are expected. Clarifying the material deformation in the sanding process is the key...

(This article belongs to the Special Issue Tribology and Surface Engineering)
  • Article
  • Open Access
4 Citations
3,677 Views
15 Pages

Impregnation of Medium-Density Fiberboard Residues with Phase Change Materials for Efficient Thermal Energy Storage

  • Gustavo E. Rodríguez,
  • Cecilia Bustos Ávila,
  • Romina Romero and
  • Alain Cloutier

1 November 2023

The wood-based panel industry generates a significant amount of solid residues in its production activities, including medium-density fiberboard (MDF) molding manufacturing. These residues consist of fine fibers measuring between 0.15 mm and 1.19 mm...

(This article belongs to the Special Issue Innovative Use of Timber and Wood-Based Composites: Applications, Design and Sustainability)
  • Article
  • Open Access
7 Citations
5,963 Views
19 Pages

Experimental Investigation of Vertical Density Profile of Medium Density Fiberboard in Hot Press

  • Asfar Hameed Minhas,
  • Naveed Ullah,
  • Asim Ahmad Riaz,
  • Muftooh Ur Rehman Siddiqi and ,
  • Khamael M. Abualnaja,
  • Khaled Althubeiti and
  • Riaz Muhammad
  • + 2 authors+ 0 author

15 November 2021

This research investigates the performance of medium density fiberboard (MDF) with respect to hot press parameters. The performance of the board, type of glue, and production efficiency determine the optimum temperature and pressure for hot pressing....

  • Article
  • Open Access
8 Citations
2,235 Views
20 Pages

Strength–Ductility Synergy in Biodegradable Mg-Rare Earth Alloy Processed via Multi-Directional Forging

  • Faseeulla Khan Mohammad,
  • Uzwalkiran Rokkala,
  • Sohail M. A. K. Mohammed,
  • Hussain Altammar and ,
  • Syed Quadir Moinuddin and
  • Raffi Mohammed
  • + 1 author+ 0 author

18 October 2025

In this study, a biodegradable Mg-Zn-Nd-Gd alloy was processed via multi-directional forging (MDF) to evaluate its microstructural evolution, mechanical performance, and corrosion behavior. Electron backscattered diffraction (EBSD) analysis was condu...

(This article belongs to the Special Issue Metals and Alloys for Biomedical Applications (2nd Edition))
  • Article
  • Open Access
779 Views
18 Pages

5 August 2026

Medium-density fiberboard (MDF) and other resin-bonded wood panels pose significant end-of-life management challenges due to the presence of urea–formaldehyde (UF) resins, which hinder material recovery and circular valorization. This study eva...

(This article belongs to the Special Issue Processes in Sustainable Waste Management and Environmental Protection)
  • Article
  • Open Access
496 Views
22 Pages

19 September 2026

Medium-density fiberboard (MDF) is widely used for embossed door panels. The fiber refining process is crucial for determining both surface quality and mechanical performance of these panels. This study investigated how different refining conditions...

(This article belongs to the Section Composites Manufacturing and Processing)
  • Article
  • Open Access
1 Citations
770 Views
19 Pages

18 May 2026

Industrial control of volatile organic compound (VOC) emissions from medium-density fibreboard (MDF) production remains constrained by a shortage of compound-resolved evidence from full-scale plants, where wood furnish, amino resin chemistry, heat tr...

(This article belongs to the Special Issue Advances in Wood and Wood Polymer Composites)
  • Article
  • Open Access
4 Citations
3,277 Views
10 Pages

Sanding is a very important process in MDF production. In this study, abrasive belts (P60 and P120) and MDF were used to conduct sanding experiments, and mass variation, surface morphology, and surface roughness of the abrasive belts were measured to...

  • Article
  • Open Access
10 Citations
2,738 Views
12 Pages

Thermomechanical Processing of a Near-α Ti Matrix Composite Reinforced by TiBw

  • Hong Feng,
  • Yonggang Sun,
  • Yuzhou Lian,
  • Shuzhi Zhang and ,
  • Changjiang Zhang,
  • Ying Xu and
  • Peng Cao
  • + 2 authors+ 0 author

16 December 2020

To further improve the mechanical properties of the as-cast 7.5 vol.% TiBw/Ti–6Al–2.5Sn–4Zr–0.7Mo–0.3Si composite, multi-directional forging (MDF) and subsequent heat treatments were carried out to adjust TiB whiskers (T...

(This article belongs to the Special Issue Forging Processes of Materials)
  • Feature Paper
  • Article
  • Open Access
11 Citations
5,468 Views
13 Pages

This paper presents a novel architecture for ring learning with errors (LWE) cryptoprocessors using an efficient approach in encryption and decryption operations. By scheduling multipliers to work in parallel, the encryption and decryption time are s...

(This article belongs to the Special Issue VLSI Architecture Design for Digital Signal Processing)
  • Article
  • Open Access
8 Citations
2,661 Views
14 Pages

Human Neutrophil Alpha-Defensins Promote NETosis and Liver Injury in Alcohol-Related Liver Cirrhosis: Potential Therapeutic Agents

  • Anna Rycyk-Bojarzyńska,
  • Beata Kasztelan-Szczerbińska,
  • Halina Cichoż-Lach,
  • Agata Surdacka and
  • Jacek Roliński

22 February 2024

Background: Neutrophils are thought to play a pivotal role in the pathogenesis of many inflammatory diseases, such as hepatitis, liver cirrhosis, etc. Activated human neutrophils release human neutrophil peptides (HNP1-3) or alpha-defensins that are...

(This article belongs to the Special Issue Updates in Liver Cirrhosis)
  • Article
  • Open Access
1 Citations
1,152 Views
25 Pages

MDF2Former: Multi-Scale Dual-Domain Feature Fusion Transformer for Hyperspectral Image Classification of Bacteria in Murine Wounds

  • Decheng Wu,
  • Wendan Liu,
  • Rui Li,
  • Xudong Fu and ,
  • Lin Tao,
  • Yinli Tian,
  • Anqiang Zhang,
  • Zhen Wang and
  • Hao Tang
  • + 4 authors+ 0 author

19 February 2026

Bacterial wound infection poses a major challenge in trauma care and can lead to severe complications such as sepsis and organ failure. Therefore, rapid and accurate identification of the pathogen, along with targeted intervention, is of vital import...

(This article belongs to the Section Color, Multi-spectral, and Hyperspectral Imaging)
  • Article
  • Open Access
7 Citations
5,124 Views
16 Pages

11 February 2023

Electronics in furniture and construction materials, in particular technologies which allow for a flexible and cable-free connection of electronics in such materials, are gaining broader interest. This study shows a further development of a concept t...

(This article belongs to the Special Issue Wood-Based Composites: Materials, Manufacturing and Engineering)
  • Review
  • Open Access
12 Citations
3,768 Views
21 Pages

Current Trends in Monitoring and Analysis of Tool Wear and Delamination in Wood-Based Panels Drilling

  • Tomasz Trzepieciński,
  • Krzysztof Szwajka,
  • Joanna Zielińska-Szwajka and
  • Marek Szewczyk

20 March 2025

Wood-based panels (WBPs) have versatile structural applications and are a suitable alternative to plastic panels and metallic materials. They have appropriate strength parameters that provide the required stiffness and strength for furniture products...

(This article belongs to the Section Advanced Manufacturing)
  • Article
  • Open Access
10 Citations
3,782 Views
15 Pages

16 January 2020

The current work systematically investigated the microstructure, texture evolution, and mechanical properties of MDFed Mg-13Gd-4Y-2Zn-0.5Zr (wt%) alloy (GWZ) on the condition of high and low temperature cycle deformation. The high and low temperature...

  • Article
  • Open Access
11 Citations
3,640 Views
19 Pages

Differential Impacts of Acacia Invasion on Nutrient Fluxes in Two Distinct Bornean Lowland Tropical Rain Forests

  • Salwana Md. Jaafar,
  • Faizah Metali,
  • Siti Nisa Syahzanani Nafiah,
  • Nur E’zzati Supri and ,
  • Nurhazimah Ahmad,
  • David F. R. P. Burslem and
  • Rahayu Sukmaria Sukri
  • + 2 authors+ 0 author

9 December 2022

Invasive Acacia species can alter nutrient cycling processes in forest ecosystems, particularly affecting total litterfall production and litter decomposition patterns. This study examined the effects of exotic Acacia mangium Willd. on total litterfa...

(This article belongs to the Section Forest Ecology and Management)
  • Article
  • Open Access
3 Citations
694 Views
17 Pages

19 February 2026

As the lightest metallic structural material, magnesium alloys face a fundamental trade-off between strength and ductility, limiting their broader application. This study investigates a processing approach to overcome this limitation by systematicall...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
3 Citations
4,533 Views
13 Pages

Polymer-Cement Composites Glazing by Concentrated Solar Energy

  • Liana Sanda Baltes,
  • Silvia Patachia,
  • Ozgur Ekincioglu,
  • Hulusi Ozkul and ,
  • Catalin Croitoru,
  • Corneliu Munteanu,
  • Bogdan Istrate and
  • Mircea Horia Tierean
  • + 3 authors+ 0 author

18 March 2021

Macro defect free (MDF) cements are polymer-cement composites characterized by high biaxial flexural strength compared to traditional concrete, having as a drawback a low water resistance. Glazing these composite materials with an inorganic enamel co...

(This article belongs to the Section High-Energy Beam Surface Engineering and Coatings)
  • Article
  • Open Access
5 Citations
3,457 Views
22 Pages

Mass Defect Filtering-Oriented Identification of Resin Glycosides from Root of Convolvulus scammonia Based on Quadrupole-Orbitrap Mass Spectrometer

  • Qiang Yin,
  • Rahima Abdulla,
  • Gulmira Kahar,
  • Haji Akber Aisa and ,
  • Chunting Li and
  • Xuelei Xin
  • + 1 author+ 0 author

This work aimed to develop and evaluate a post-acquisition data processing strategy, referred to as a mass defect filter (MDF), for rapid target the resin glycosides in root of Convolvulus scammonia by setting mass rang and mass defect range from hig...

(This article belongs to the Special Issue Study on Chemical Constituents and Pharmacological Action of Natural Medicines)
  • Article
  • Open Access
822 Views
22 Pages

To improve operational safety in confined spaces, this study proposes an intelligent safety monitoring framework that utilizes multimodal data from wearable devices. The framework comprises two core components: a human activity recognition (HAR) modu...

(This article belongs to the Section Bioinspired Sensorics, Information Processing and Control)
  • Article
  • Open Access
5 Citations
3,262 Views
15 Pages

Volatile Carbonyl Compounds Emission in Dry-Process Fibreboard: Identification through a Selective GDME-HPLC-DAD-MS/MS Method

  • Fátima Daniela Gonçalves,
  • Jorge M. Martins,
  • Luísa H. Carvalho,
  • José António Rodrigues and
  • Rui Miguel Ramos

This work presents a novel application of gas-diffusion microextraction (GDME) for the extraction and identification of volatile carbonyl compounds from a dry-process fibreboard (MDF) by combining high-performance liquid chromatography with diode arr...

(This article belongs to the Special Issue Design and Development of Sample Preparation Procedures for the Determination of Volatile Organic Compounds)
  • Article
  • Open Access
23 Citations
4,906 Views
21 Pages

Experimental Study on Drilling MDF with Tools Coated with TiAlN and ZrN

  • Krzysztof Szwajka,
  • Joanna Zielińska-Szwajka and
  • Tomasz Trzepiecinski

26 January 2019

There is increasing use of wood-based composites in industry not only because of the shortage of solid wood, but above all for their better properties such as: strength, aesthetic appearance, etc., compared to wood. Medium density fiberboard (MDF) is...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
7 Citations
2,873 Views
18 Pages

In recent years, Convolutional Neural Network (CNN) models have demonstrated notable advancements in various domains such as image classification and Natural Language Processing (NLP). Despite their success in image classification tasks, their potent...

(This article belongs to the Special Issue Medical Data Processing and Analysis—2nd Edition)
  • Article
  • Open Access
7 Citations
3,762 Views
14 Pages

12 August 2024

No matter where we reside, the issue of greenhouse gas emissions impacts us all. Their influence has a disastrous effect on the earth’s climate, producing global warming and many other irreversible environmental impacts, even though it is occas...

(This article belongs to the Section Polymeric Materials)
  • Article
  • Open Access
4 Citations
1,928 Views
16 Pages

Eco-Design of Thermopressing through Induction of 100% Coriander-Based Fiberboards: Optimization of Molding Conditions

  • Priscila Guaygua-Amaguaña,
  • Guadalupe Vaca-Medina,
  • Claire Vialle,
  • Caroline Sablayrolles and
  • Philippe Evon

1 October 2024

The hot pressing process for 100% coriander-based fiberboards was optimized using an induction RocTool system, which offers rapid mold heating and cooling. The fiberboards were made using deoiled press cake as a protein binder and extrusion-refined s...

(This article belongs to the Section Green Materials)

of 3