We have performed full-stack research of Pd1−xFex and Pd1-xCox (x = 0.01–0.1) alloys. At the first stage, the occurrence of impurity ferromagnetism in the considered alloys was studied employing the density functional theory (DFT). At the...
The effect of doping the ferrite alloy Fe-16Cr by the oversized impurities Sb and Au on the mechanism of the short-range ordering induced by “warm” severe plastic deformation was studied using the method of Mössbauer spectroscopy. A...
We have investigated Mn, Co and Ni substitution effects on polycrystalline samples of LaFePO0.95F0.05 by resistivity and magnetoresistance measurements. In LaFe1-xMxPO0.95F0.05 (M = Mn, Co and Ni), the superconducting transition temperature (Tc) mono...
The large-scale implementations of lithium iron phosphate (LFP) batteries for energy storage systems have been gaining attention around the world due to their quality of high technological maturity and flexible configuration. Unfortunately, the expon...
Ti-bearing blast furnace slag (TBFS) can be converted to impurity bearing TiOSO4 solution for TiO2 pigment production. However, the H2TiO3 (MTA) hydrolyzed from the solution has too high Fe/V impurity to meet the standard for TiO2 pigment. In this st...
A reentrant temperature dependence of the thermoresistivity
Capacitive deionization (CDI) based on LSC-957 resin/carbon composite electrodes was used to remove Fe impurity ions from a spent vanadium electrolyte, which enabled simple and efficient regeneration of the electrolyte. The experiments conducted in t...
Recycled aluminium moves from downcycling towards the automotive sheet, structural castings and high-performance extrusions. The central constraint on closed-loop recycling is no longer the mere presence of impurities. It is the multiscale microstruc...
In this work, the effect of Fe and Si content on microstructure, mechanical properties, and corrosion resistance of 7050 alloy was systematically investigated by room temperature tensile, fracture toughness, and exfoliation corrosion tests, complemen...
We present the results of ab initio studies of the structural and magnetic properties of the Pd host matrix doped by Fe atoms at various concentrations. By means of the density functional theory, we deduce that iron impurities are able to initialize...
This study systematically investigates the effects of Fe and Si impurities on the microstructure and mechanical properties of Al-Cu-Li alloys. Five alloy compositions with controlled Fe (0.03–0.12 wt.%) and Si (0.03–0.12 wt.%) contents we...
Iron cation impurities reportedly enhance the oxygen evolution reaction (OER) activity of Ni-based catalysts, and the enhancement of OER activity by Fe cations has been extensively studied. Meanwhile, Fe salts, such as iron hydroxide and iron oxyhydr...
Graphene has immense potential as a material for electronic devices owing to its unique electrical properties. However, large-area graphene produced by chemical vapor deposition (CVD) must be transferred from the as-grown copper substrate to an arbit...
The research aims to study the effect of adding mischmetal (Mm) to the TiFe0.86Mn0.07Co0.07 alloy on its hydrogen storage performance and cyclic stability. The results show that TiFe0.86Mn0.07Co0.07 + x% Mm (x = 0,4,6,8) alloys can be easily activate...
Activated carbon is widely used as an electrode material in supercapacitors due to its superior electrochemical stability, excellent electrical conductivity, and environmental friendliness. In this study, the self-discharge mechanisms of activated ca...
This study presents a comprehensive analysis of the modifications in electronic structure and magnetism resulting from electronic excitation in pulsed laser-deposited Ba0.7Sr0.3FexTi(1−x)O3 thin films, specifically for compositions with x = 0,...
The increased recycling in aluminum production has raised the impurity content in the industry, thus increasing its effect on mechanical characteristics and making it difficult for recycled products to meet the properties’ goals as their effect...
Light-weight ferro-aluminium alloys are finding increasing application in the transport sector to reduce overall weights, energy costs and CO2 emissions. As the primary production processes of both Fe and Al are among the most energy-intensive indust...
The Fe-rich intermetallic phases have a broadly detrimental effect on the mechanical properties of Al–Cu alloy. In this paper, the continuous evolution of Fe-rich intermetallics and their effects on mechanical properties, especially the tensile...
Pure bismuth ferrite (BFO) and BFO with impurity phases (Bi2O3 or Fe2O3) were synthesized by the hydrothermal method. Complex dielectric permittivity (ε) and electrical conductivity (σ) were determined by complex impedance measurements...
The quasi-one-dimensional antiferromagnetic insulator BaFe
Non-processed kaolin (flint kaolin) from a mine located in the Capim area (Amazon region, northern Brazil), usually considered as waste, was selected as a source of silicon and aluminum in the synthesis of SAPO-34. This is a molecular sieve and catio...
The rapid increase in electronic waste poses a significant environmental issue, with copper-rich residues considered among the most valuable fractions. Extracting copper of high purity from these materials is critical for advancing sustainable resour...
Reactive impurities originating from excipients can cause drug stability issues, even at trace amounts. When produced during final dosage form storage, they are especially hard to control, and often, factors inducing their formation remain unidentifi...
Employing first-principle calculations, we investigated the influence of the impurity, Fe atom, on magnetism and electronic structures of Heusler compound Ti2CoSi, which is a spin gapless semiconductor (SGS). When the impurity, Fe atom, intervened, T...
The surface structure and electronic properties of Mg vacancy defects on talc (001) and impurity defects with Fe, Mn, Ni, Al, and Ca replacing Mg atoms were calculated by using density functional theory. The calculation results show that the order of...
The removal of impurities in molybdenum concentrate has become a new challenge for enterprises due to the cancellation of pickling. Whether impurity minerals can be converted into soluble ions during roasting is important for the impurity removal by...
This paper reviews the effects of Pb and Zn impurities and their removal in the ironmaking process. The phase changes during ironmaking were investigated, along with the removal techniques of such impurities and their environmental impact. Results sh...
Direct CO2 mineralization of carbide slag offers considerable potential for sustainable waste valorization, CO2 utilization, and high-value CaCO3 production, although associated Si-, Fe-, and Al-bearing impurities limit product quality. This study co...
The synthesis of bimetallic iron-nickel nanoparticles with control over the synthesized phases, particle size, surface chemistry, and oxidation level remains a challenge that limits the application of these nanoparticles. Pulsed laser ablation in liq...
The metal impurity assisted ion beam technology has shown its uniqueness and effectiveness in the formation and precise control of nanostructures on the surface of materials. Hence, the investigation in this area is vital. The morphology evolution of...
In this paper, the purification of lanthanum was studied by using zone-refining technology. The equilibrium distribution coefficient of impurities was calculated using a liquidus slope method to reveal impurities’ distribution properties. Meanw...
Recycling rare-earth elements from Nd magnet scrap (Nd–Fe–B scrap) is a highly economical process; however, its efficiency is low due to large portions of Fe impurity. In this study, the effective separation of Fe impurity from scrap was...
As one of the critical raw materials, very pure gallium is important for the semiconductor and photoelectric industry. Unfortunately, refining gallium to obtain a purity that exceeds 99.99999% is very difficult. In this paper, a new, facile and effic...
The possibility of removing metallic (such as Zr, Fe, Cr, and Zn) impurities and non-metallic (such as [O] and C) impurities from technogenic hafnium through single and double refining in the conditions of electron beam melting (EBM) has been studied...
The presence of impurities such as Ca, Mg, and Al during the precipitation of rare earths (REs) using ammonium bicarbonate directly affects product purity. It is necessary to optimize precipitation methods and conditions to improve the separation eff...
Ultrasonic-assisted precipitation was employed to sustainably isolate Fe in the hydrochloric acid lixivium of low-grade laterite for the synthesis of battery-grade iron phosphate. The recovery efficiency of Ni and Co exceeded 99%, while the removal e...
The corrosion resistance of 316 stainless steel (316SS) in molten KCl-MgCl2 salts was studied through static immersion corrosion at high temperatures. Below 600 °C, the corrosion rate of 316SS increased slowly with increasing temperature. When th...
The electrical conductivity of La0.5−xSr0.5FeO3−δ, investigated as a function of the nominal cation deficiency in the A-sublattice, x, varying from 0 to 0.02, has demonstrated a nonlinear dependence. An increase in the x value from 0 to 0.01 resulted...
Generally, the Cu-bearing direct reduction iron powder (CBDRI) obtained from a direct reduction-magnetic separation process of waste copper slag contains a high content of impurities and cannot be directly used to produce Cu-bearing special steel. In...
With increasing natural gas processing demands, triethylene glycol (TEG) in dehydration systems becomes contaminated by gas-carried impurities, leading to problematic foaming, degradation, and significant glycol losses that compromise operational eco...
Removal of iron impurities in silica is one of the most important issues in the glass industry. The most noted impurities are surface coating and staining on silica particles; additionally, some cases of inclusions are observed. The prepared silica s...
The real-time measurement of the content of impurities such as iron and aluminium ions is one of the keys to quality evaluation in the production process of high-purity lithium carbonate; however, impurity detection has been a time-consuming process...
By tuning the extrusion parameters, the corrosion performances of as-extruded Mg-0.5Zn(-0.2X) alloys (X: Ca/Sr/Ag/In/Cu, denoted as Z05, Z0502-Ca, Z0502-Sr, Z0502-Ag, Z0502-In and Z0502-Cu, respectively) with similar grain sizes were investigated and...
Kunzite, the pink variety of spodumene is famous and desirable among gemstone lovers. Due to its tenebrescent properties, kunzite always remains a hot research candidate among physicists and mineralogists. The present work is continuing the effort to...
Commercial aluminum (Al) metals contain unavoidable impurities, such as iron (Fe) and silicon (Si). Due to its low solubility and high chemical affinity to Al, Fe exists in the form of Fe-containing intermetallic compounds (Fe-IMCs), which are crucia...
Fe impurity is abundant in rare earth leaching solutions. The optimal hydrate structure of Fe(OH)2+ was calculated based on the quantum chemical in the water environment to investigate the microscopic occurrence of Fe impurity on kaolinite surfaces....
To address the challenge of controlling Fe impurity content during the recycling of aluminum alloys, this study utilized commercial 5083 aluminum alloy as a matrix to prepare alloy samples with four different Fe contents via smelting. The effects of...
Aluminium secondary materials are often contaminated by impurities such as iron. As the alloy properties are affected by impurities, it is necessary to refine aluminium melts. The formation of Fe intermetallics in aluminium melts can be used to devel...
A model of the thermovoltaic effect emergence in ZnO/ZnO<Me> (Me = Cu, Fe), sandwich structures has been developed in the article. The samples were made by the sol-gel method. When they were uniformly heated in a laboratory furnace in the tempe...
of 12