Skip to Content
You are currently on the new version of our website. Access the old version .

2,118 Results Found

  • Article
  • Open Access
15 Citations
8,651 Views
19 Pages

Acetic Acid Etching of Mg-xGd Alloys

  • Marcjanna Maria Gawlik,
  • Björn Wiese,
  • Alexander Welle,
  • Jorge González and ,
  • Valérie Desharnais,
  • Jochen Harmuth,
  • Thomas Ebel and
  • Regine Willumeit-Römer
  • + 3 authors+ 0 author

23 January 2019

Mg-xGd alloys show potential to be used for degradable implants. As rare earth containing alloys, they are also of special interest for wrought products. All applications from medical to engineering uses require a low and controlled degradation or co...

(This article belongs to the Special Issue Magnesium Alloys for Biomedical Applications)
  • Feature Paper
  • Article
  • Open Access
14 Citations
11,459 Views
22 Pages

Wet Chemical and Plasma Etching of Photosensitive Glass

  • Ulrike Brokmann,
  • Christoph Weigel,
  • Luisa-Marie Altendorf,
  • Steffen Strehle and
  • Edda Rädlein

21 August 2023

Photosensitive glasses for radiation-induced 3D microstructuring, due to their optical transparency and thermal, mechanical, and chemical resistance, enable the use of new strategies for numerous microscale applications, ranging from optics to biomed...

  • Article
  • Open Access
2 Citations
1,716 Views
15 Pages

7 April 2025

Before depositing a thin film, modifying the substrate surface was a crucial step in the film preparation process, having a decisive impact on the final properties of the film. In addition to additive methods such as preparing transition layers, subt...

  • Feature Paper
  • Article
  • Open Access
25 Citations
7,286 Views
8 Pages

High Selectivity, Low Damage ICP Etching of p-GaN over AlGaN for Normally-off p-GaN HEMTs Application

  • Penghao Zhang,
  • Luyu Wang,
  • Kaiyue Zhu,
  • Yannan Yang and ,
  • Rong Fan,
  • Maolin Pan,
  • Saisheng Xu,
  • Min Xu,
  • Chen Wang and
  • David Wei Zhang
  • + 6 authors+ 1 author

9 April 2022

A systematic study of the selective etching of p-GaN over AlGaN was carried out using a BCl3/SF6 inductively coupled plasma (ICP) process. Compared to similar chemistry, a record high etch selectivity of 41:1 with a p-GaN etch rate of 3.4 nm/min was...

(This article belongs to the Special Issue Advanced Micro- and Nano-Manufacturing Technologies)
  • Article
  • Open Access
22 Citations
4,343 Views
13 Pages

Influence of Successive Chemical and Thermochemical Treatments on Surface Features of Ti6Al4V Samples Manufactured by SLM

  • Jesús E. González,
  • Gabriela de Armas,
  • Jeidy Negrin,
  • Ana M. Beltrán and ,
  • Paloma Trueba,
  • Francisco J. Gotor,
  • Eduardo Peón and
  • Yadir Torres
  • + 3 authors+ 0 author

11 February 2021

Ti6Al4V samples, obtained by selective laser melting (SLM), were subjected to successive treatments: acid etching, chemical oxidation in hydrogen peroxide solution and thermochemical processing. The effect of temperature and time of acid etching on t...

(This article belongs to the Special Issue News Trends in Powder Metallurgy: Microstructures, Properties, Durability)
  • Article
  • Open Access
4 Citations
3,389 Views
11 Pages

9 December 2022

Controlling the surface morphology and composition of the perovskite substrates is a critical aspect in tuning the final properties of the deposited films and of their interfaces. The paper reports on a chemical etching method developed for (110) and...

(This article belongs to the Special Issue Ferroelectric Materials)
  • Feature Paper
  • Review
  • Open Access
125 Citations
17,485 Views
24 Pages

In today’s nanoworld, there is a strong need to manipulate and process materials on an atom-by-atom scale with new tools such as reactive plasma, which in some states enables high selectivity of interaction between plasma species and materials. These...

(This article belongs to the Special Issue Plasma Nanoengineering and Nanofabrication)
  • Article
  • Open Access
15 Citations
3,239 Views
11 Pages

28 October 2020

Background and objectives: This study aimed to investigate the change in bond strength between resin cement and tetragonal zirconia polycrystalline stabilized with 3 to 8 mol% yttrium oxide (Y-TZP) and observe the topographical change of the Y-TZP su...

(This article belongs to the Special Issue Research on Dental Biomaterials and Equipment)
  • Article
  • Open Access
30 Citations
7,401 Views
12 Pages

Preparation of Textured Surfaces on Aluminum-Alloy Substrates

  • Markéta Kadlečková,
  • Antonín Minařík,
  • Petr Smolka,
  • Aleš Mráček and ,
  • Erik Wrzecionko,
  • Libor Novák,
  • Lenka Musilová and
  • Radek Gajdošík
  • + 3 authors+ 0 author

31 December 2018

The ways of producing porous-like textured surfaces with chemical etching on aluminum-alloy substrates were studied. The most appropriate etchants, their combination, temperature, and etching time period were explored. The influence of a specifically...

(This article belongs to the Special Issue Surface Modification to Improve Properties of Materials)
  • Article
  • Open Access
32 Citations
3,573 Views
12 Pages

The Shear Bond Strength of Resin-Based Luting Cement to Zirconia Ceramics after Different Surface Treatments

  • Grzegorz Sokolowski,
  • Agata Szczesio-Wlodarczyk,
  • Małgorzata Iwona Szynkowska-Jóźwik,
  • Wioleta Stopa and ,
  • Jerzy Sokolowski,
  • Karolina Kopacz and
  • Kinga Bociong
  • + 2 authors+ 0 author

2 August 2023

Due to its unique properties, zirconia is increasingly being used in dentistry, but surface preparation for bonding is difficult because of its polycrystalline structure. This study aimed to determine the effect of a new etching technique (Zircos-E)...

(This article belongs to the Special Issue Advanced Materials for Oral Application (Volume II))
  • Article
  • Open Access
33 Citations
7,374 Views
16 Pages

19 August 2018

The interaction of plasma with polymeric substrates generates both roughness and charging on the surface of the substrates. This work, toward the comprehension and, finally, the control of plasma-induced surface roughness, delves into the intertwined...

(This article belongs to the Special Issue Plasma-Based Surface Engineering)
  • Article
  • Open Access
7 Citations
2,517 Views
11 Pages

Enhanced Soot Oxidation Activity of a CuO-Doped CeO2 Catalyst via Acid Etching

  • Changlong Zheng,
  • Xiaodong Wu,
  • Zhenguo Li,
  • Rui Ran and
  • Duan Weng

23 November 2023

Copper oxides tend to agglomerate on the surface of CeO2, with a high amount of Cu. In this study, a CeO2 catalyst with a high CuO doping amount was treated with nitric acid to improve its catalytic performance for soot oxidation. The effect of acid...

(This article belongs to the Special Issue Catalysts for Mobile Source: Low-Carbon and Pollution Emission Control)
  • Article
  • Open Access
829 Views
16 Pages

Two-Step Polishing Technique for Flat and Smooth Copper Substrates by Electrochemical and Chemical Etching

  • Ke Wang,
  • Xinghua Chen,
  • Boju Hou,
  • Peng Xu and ,
  • Yufei Li,
  • Xutong Liu,
  • Huirong Shi,
  • Ming Zhang and
  • Hongding Wang
  • + 4 authors+ 0 author

12 April 2026

Methods of single-point diamond turning and chemical mechanical polishing can achieve an ultra-flat substrate. However, these methods which rely on mechanical interactions to achieve material removal can easily lead to defects such as abrasive embedd...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
4 Citations
3,593 Views
9 Pages

Surface Porosity of Natural Diamond Crystals after the Catalytic Hydrogenation

  • Aleksei Chepurov,
  • Valeri Sonin,
  • Dmitry Shcheglov,
  • Egor Zhimulev and ,
  • Sergey Sitnikov,
  • Alexander Yelisseyev and
  • Anatoly Chepurov
  • + 2 authors+ 0 author

3 November 2021

The study of diamond surfaces is traditionally undertaken in geology and materials science. As a sample material, two natural diamond crystals of type Ia were selected, and their luminescence and nitrogen state was characterized. In order to etch the...

(This article belongs to the Section Inorganic Crystalline Materials)
  • Article
  • Open Access
42 Citations
8,048 Views
25 Pages

Optimization of Mechanical Properties for Polyoxymethylene/Glass Fiber/Polytetrafluoroethylene Composites Using Response Surface Methodology

  • Jasbir Singh Kunnan Singh,
  • Yern Chee Ching,
  • Luqman Chuah Abdullah,
  • Kuan Yong Ching and ,
  • Shaifulazuar Razali and
  • Seng Neon Gan
  • + 1 author+ 0 author

20 March 2018

This paper investigated the effects of polytetrafluoroethylene (PTFE) micro-particles on mechanical properties of polyoxymethylene (POM) composites. Since PTFE is immiscible with most polymers, the surface was etched using sodium naphthalene salt in...

(This article belongs to the Special Issue Mechanics of Emerging Polymers with Unprecedented Networks)
  • Feature Paper
  • Communication
  • Open Access
2 Citations
3,368 Views
8 Pages

20 September 2022

The global RE100 campaign is attracting attention worldwide due to climate change caused by global warming, increasingly highlighting the efficiency of renewable energy. Texturing of photovoltaic devices increases the devices’ efficiency by reducing...

(This article belongs to the Special Issue Micro/Nano-Functional Structures: Design, Manufacturing, Characterization and Applications)
  • Article
  • Open Access
735 Views
13 Pages

Atomic-Level Polishing of Single-Crystal Diamond Using a Combination of Reactive Ion Etching and Chemical Mechanical Polishing

  • Rongchen Zhang,
  • Xiangbing Wang,
  • Xuejian Cui,
  • Yi Hong and ,
  • Nan Jiang,
  • Xiangdong Yang and
  • Jian Yi
  • + 2 authors+ 0 author

22 June 2026

Single-crystal diamond (SCD) is an ideal substrate material for semiconductor devices due to its extremely wide bandgap and exceptionally high thermal conductivity. However, diamond’s extreme hardness and chemical inertness pose challenges for...

(This article belongs to the Section Optical and Photonic Materials)
  • Article
  • Open Access
9 Citations
9,299 Views
12 Pages

Three-Dimensional Simulation of DRIE Process Based on the Narrow Band Level Set and Monte Carlo Method

  • Jia-Cheng Yu,
  • Zai-Fa Zhou,
  • Jia-Le Su,
  • Chang-Feng Xia and ,
  • Xin-Wei Zhang,
  • Zong-Ze Wu and
  • Qing-An Huang
  • + 2 authors+ 0 author

9 February 2018

A three-dimensional topography simulation of deep reactive ion etching (DRIE) is developed based on the narrow band level set method for surface evolution and Monte Carlo method for flux distribution. The advanced level set method is implemented to s...

  • Article
  • Open Access
20 Citations
11,605 Views
14 Pages

On the Etching Mechanism of Highly Hydrogenated SiN Films by CF4/D2 Plasma: Comparison with CF4/H2

  • Shih-Nan Hsiao,
  • Thi-Thuy-Nga Nguyen,
  • Takayoshi Tsutsumi,
  • Kenji Ishikawa and ,
  • Makoto Sekine and
  • Masaru Hori
  • + 1 author+ 0 author

14 December 2021

With the increasing interest in dry etching of silicon nitride, utilization of hydrogen-contained fluorocarbon plasma has become one of the most important processes in manufacturing advanced semiconductor devices. The correlation between hydrogen-con...

  • Article
  • Open Access
19 Citations
5,400 Views
16 Pages

Contamination of Substrate-Coating Interface Caused by Ion Etching

  • Peter Panjan,
  • Aljaž Drnovšek,
  • Miha Čekada and
  • Matjaž Panjan

16 June 2022

In–situ cleaning of the substrate surface by ion etching is an integral part of all physical vapor deposition (PVD) processes. However, in industrial deposition systems, some side effects occur during the ion etching process that can cause re-c...

(This article belongs to the Special Issue Surface Topography Effects on Functional Properties of PVD Coatings)
  • Review
  • Open Access
16 Citations
4,690 Views
23 Pages

Recent Advances in Black Silicon Surface Modification for Enhanced Light Trapping in Photodetectors

  • Abdulrahman Alsolami,
  • Hadba Hussain,
  • Radwan Noor,
  • Nourah AlAdi and ,
  • Nada Almalki,
  • Abdulaziz Kurdi,
  • Thamer Tabbakh,
  • Adnan Zaman,
  • Salman Alfihed and
  • Jing Wang
  • + 5 authors+ 0 author

28 October 2024

The intricate nanostructured surface of black silicon (BSi) has advanced photodetector technology by enhancing light absorption. Herein, we delve into the latest advancements in BSi surface modification techniques, specifically focusing on their prof...

(This article belongs to the Special Issue Advances in Photonics and Optics: Materials and Structures for Emerging Applications)
  • Article
  • Open Access
9 Citations
8,869 Views
19 Pages

Integration of Electrodeposited Ni-Fe in MEMS with Low-Temperature Deposition and Etch Processes

  • Giuseppe Schiavone,
  • Jeremy Murray,
  • Richard Perry,
  • Andrew R. Mount and ,
  • Marc P. Y. Desmulliez and
  • Anthony J. Walton
  • + 1 author+ 0 author

22 March 2017

This article presents a set of low-temperature deposition and etching processes for the integration of electrochemically deposited Ni-Fe alloys in complex magnetic microelectromechanical systems, as Ni-Fe is known to suffer from detrimental stress de...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
1 Citations
3,443 Views
14 Pages

Experimental Etching of Diamonds: Extrapolation to Impact Diamonds from the Popigai Crater (Russia)

  • Valeri Sonin,
  • Egor Zhimulev,
  • Aleksei Chepurov,
  • Ivan Gryaznov and ,
  • Anatoly Chepurov,
  • Valentin Afanasiev and
  • Nikolai Pokhilenko
  • + 2 authors+ 0 author

5 November 2021

Diamond etching in high-temperature ambient-pressure experiments has been performed aimed to assess possible postimpact effects on diamonds in impact craters, for the case of the Popigai crater in Yakutia (Russia). The experiments with different etch...

(This article belongs to the Section Mineral Deposits)
  • Article
  • Open Access
1 Citations
2,644 Views
21 Pages

Investigation of Phase Segregation in Highly Doped InP by Selective Electrochemical Etching

  • Yana Suchikova,
  • Sergii Kovachov,
  • Ihor Bohdanov,
  • Anatoli I. Popov and ,
  • Zhakyp T. Karipbayev,
  • Artem L. Kozlovskiy and
  • Marina Konuhova
  • + 2 authors+ 0 author

We demonstrate that selective electrochemical etching is a reliable method for detecting and observing the uneven concentration distribution of impurities in indium phosphide crystals, which accompanies the growth of highly doped crystals using the C...

(This article belongs to the Section Manufacturing Technology)
  • Article
  • Open Access
16 Citations
5,545 Views
17 Pages

Rapid Functionalization of Polytetrafluorethylene (PTFE) Surfaces with Nitrogen Functional Groups

  • Alenka Vesel,
  • Rok Zaplotnik,
  • Gregor Primc,
  • Miran Mozetič and ,
  • Tadeja Katan,
  • Rupert Kargl,
  • Tamilselvan Mohan and
  • Karin Stana Kleinschek
  • + 3 authors+ 0 author

9 December 2021

The biocompatibility of body implants made from polytetrafluoroethylene (PTFE) is inadequate; therefore, the surface should be grafted with biocompatible molecules. Because PTFE is an inert polymer, the adhesion of the biocompatible film may not be a...

(This article belongs to the Special Issue Degradation and Biological Application of Polymers)
  • Article
  • Open Access
7 Citations
6,248 Views
7 Pages

Step Coverage and Dry Etching Process Improvement of Amorphous Carbon Hard Mask

  • Zheng Jiang,
  • Hao Zhu,
  • Qingqing Sun and
  • Davidwei Zhang

15 October 2021

Amorphous carbon hard mask (ACHM) films have been widely applied as protective components and hard etching masks in lithography and dry etching processes. The capability of lithography is directly dependent on the step coverage (SC) of the ACHM. Poor...

(This article belongs to the Section Semiconductor Devices)
  • Article
  • Open Access
2 Citations
5,525 Views
15 Pages

Influence of the Application Time of Silane for the Bonding Performance between Feldspar or Lithium Disilicate Ceramics and Luting Resin Composites

  • Florian Fuchs,
  • Sina Maria Westerhove,
  • Leonie Schmohl,
  • Andreas Koenig and ,
  • Rujito Sesariojiwandono Ridho Suharbiansah,
  • Sebastian Hahnel and
  • Angelika Rauch
  • + 2 authors+ 0 author

A correct silanization time is essential for successful surface functionalization and sufficient bonding to dental ceramics. The shear bond strength (SBS) of lithium disilicate (LDS) and feldspar (FSC) ceramics and luting resin composite was investig...

(This article belongs to the Special Issue Functionalized Dental Materials for Synergy in Mechanical, Aesthetic, and Microbiological Behavior)
  • Article
  • Open Access
8 Citations
4,619 Views
13 Pages

15 May 2019

Various mechanical and chemical surface treatments have been proposed to improve the retention of fiber-reinforced composite post (FRCP), but the results are still controversial. The bond strength and durability of a self-etching ceramic primer, whic...

(This article belongs to the Special Issue Advances in Natural Fiber Reinforced Polymer and Geopolymer Composites: Synthesis, Applications and Future Directions)
  • Article
  • Open Access
7 Citations
2,916 Views
21 Pages

Mechanism Analysis of Nanosecond Pulse Laser Etching of SiCp/Mg Composites

  • Zhe Wu,
  • Jianyang Song,
  • Yang Zhang,
  • Bo Xue and
  • Sijia Wang

31 October 2022

Due to the introduction of silicon carbide reinforcement, the physical and cutting properties of SiCp/Mg composites are very different from those of metal composites. Nanosecond pulse laser processing is more efficient than traditional processing for...

(This article belongs to the Special Issue Study on Advanced Metal Matrix Composites)
  • Proceeding Paper
  • Open Access
8 Citations
3,844 Views
5 Pages

Nanofabrication of Vertically Aligned 3D GaN Nanowire Arrays with Sub-50 nm Feature Sizes Using Nanosphere Lift-off Lithography

  • Tony Granz,
  • Shinta Mariana,
  • Gerry Hamdana,
  • Feng Yu and ,
  • Muhammad Fahlesa Fatahilah,
  • Irene Manglano Clavero,
  • Prabowo Puranto,
  • Zhi Li,
  • Uwe Brand and
  • Hutomo Suryo Wasisto
  • + 8 authors+ 3 authors

Vertically aligned 3D gallium nitride (GaN) nanowire arrays with sub-50 nm feature sizes were fabricated using a nanosphere lift-off lithography (NSLL) technique combined with hybrid top-down etching steps (i.e., inductively coupled plasma dry reacti...

(This article belongs to the Proceedings of Proceedings of Eurosensors 2017, Paris, France, 3–6 September 2017)
  • Article
  • Open Access
30 Citations
9,235 Views
17 Pages

26 July 2020

Quartz is widely used in microelectromechanical systems (MEMS). Especially, MEMS quartz resonators are applied to sensors and serve as sensitive elements. The capability of deep etching is a limitation for the application. Presented in this paper is...

(This article belongs to the Special Issue Micro-Manufacturing and Applications)
  • Article
  • Open Access
2 Citations
4,377 Views
15 Pages

Evaluation of Infiltrant Application in the Course of Root Cementum Caries with Different Methods of Surface Preparation—An In Vitro Study

  • Anna Nowak-Wachol,
  • Anna Korytkowska-Wałach,
  • Bartosz Chmiela,
  • Kacper Wachol and ,
  • Magdalena Wyszyńska,
  • Maciej Łopaciński,
  • Sayedamirreza Mostafavi,
  • Tadeusz Morawiec and
  • Małgorzata Skucha-Nowak
  • + 4 authors+ 0 author

The aim of this study is to evaluate the depth of penetration of an experimental preparation with the characteristics of a dental infiltrant into the decalcified root cementum tissue and observation of the root cementum tissue subjected to a single a...

(This article belongs to the Special Issue Advances and Innovations in Dental Materials and Coatings)
  • Article
  • Open Access
83 Citations
6,353 Views
17 Pages

A Newly Created Meso-, Micro-, and Nano-Scale Rough Titanium Surface Promotes Bone-Implant Integration

  • Masakazu Hasegawa,
  • Juri Saruta,
  • Makoto Hirota,
  • Takashi Taniyama and ,
  • Yoshihiko Sugita,
  • Katsutoshi Kubo,
  • Manabu Ishijima,
  • Takayuki Ikeda,
  • Hatsuhiko Maeda and
  • Takahiro Ogawa
  • + 5 authors+ 0 author

Titanium implants are the standard therapeutic option when restoring missing teeth and reconstructing fractured and/or diseased bone. However, in the 30 years since the advent of micro-rough surfaces, titanium’s ability to integrate with bone h...

(This article belongs to the Special Issue Functional Materials for Bone Regeneration: Biomaterials and Cells)
  • Feature Paper
  • Article
  • Open Access
8 Citations
2,524 Views
21 Pages

Supported MOCVD TiO2 Thin Films Grown on Modified Stainless Steel Mesh for Sensing Applications

  • Naida El Habra,
  • Francesca Visentin,
  • Francesca Russo,
  • Alessandro Galenda and ,
  • Alessia Famengo,
  • Marzio Rancan,
  • Maria Losurdo and
  • Lidia Armelao
  • + 3 authors+ 0 author

29 September 2023

Among semiconductor metal oxides, that are an important class of sensing materials, titanium dioxide (TiO2) thin films are widely employed as sensors because of their high chemical and mechanical stability in harsh environments, non-toxicity, eco-com...

(This article belongs to the Special Issue Functional Nanomaterials for Sensing Devices: Synthesis, Characterization and Applications)
  • Perspective
  • Open Access
32 Citations
10,164 Views
28 Pages

Recent Developments and Prospects of Fully Recessed MIS Gate Structures for GaN on Si Power Transistors

  • Pedro Fernandes Paes Pinto Rocha,
  • Laura Vauche,
  • Patricia Pimenta-Barros,
  • Simon Ruel and ,
  • René Escoffier and
  • Julien Buckley
  • + 1 author+ 0 author

24 March 2023

For high electron mobility transistors (HEMTs) power transistors based on AlGaN/GaN heterojunction, p-GaN gate has been the gate topology commonly used to deplete the two dimensional electron gas (2-DEG) and achieve a normally-OFF behavior. But fully...

(This article belongs to the Section F3: Power Electronics)
  • Article
  • Open Access
17 Citations
3,456 Views
15 Pages

Alkali-Treated Alumina and Zirconia Powders Decorated with Hydroxyapatite for Prospective Biomedical Applications

  • Damian S. Nakonieczny,
  • Gražyna Simha Martynková,
  • Marianna Hundáková,
  • Gabriela Kratošová and ,
  • Sylva Holešová,
  • Jana Kupková,
  • Lenka Pazourková and
  • Justyna Majewska
  • + 3 authors+ 0 author

14 February 2022

The alumina and zirconia surfaces were pretreated with chemical etching using alkaline mixtures of ammonia, hydrogen peroxide and sodium hydroxide, and followed with application of the powder layer of Ca-deficient hydroxyapatite (CDH). The influence...

(This article belongs to the Special Issue Dental Implants: Materials and Design)
  • Article
  • Open Access
14 Citations
3,490 Views
13 Pages

Enhanced Photoluminescence of R6G Dyes from Metal Decorated Silicon Nanowires Fabricated through Metal Assisted Chemical Etching

  • Ioannis Kochylas,
  • Anastasios Dimitriou,
  • Maria-Athina Apostolaki,
  • Maria-Christina Skoulikidou and ,
  • Vlassios Likodimos,
  • Spiros Gardelis and
  • Nikolaos Papanikolaou
  • + 2 authors+ 0 author

7 February 2023

In this study, we developed active substrates consisting of Ag-decorated silicon nanowires on a Si substrate using a single-step Metal Assisted Chemical Etching (MACE) process, and evaluated their performance in the identification of low concentratio...

(This article belongs to the Section Materials Physics)
  • Article
  • Open Access
10 Citations
2,975 Views
12 Pages

Facile Electrochemical Method for the Fabrication of Stable Corrosion-Resistant Superhydrophobic Surfaces on Zr-Based Bulk Metallic Glasses

  • Mengmeng Yu,
  • Ming Zhang,
  • Jing Sun,
  • Feng Liu and ,
  • Yujia Wang,
  • Guanzhong Ding,
  • Xiubo Xie,
  • Li Liu,
  • Xiangjin Zhao and
  • Haihong Li
  • + 5 authors+ 0 author

12 March 2021

Both surface microstructure and low surface energy modification play a vital role in the preparation of superhydrophobic surfaces. In this study, a safe and simple electrochemical method was developed to fabricate superhydrophobic surfaces of Zr-base...

(This article belongs to the Special Issue Interfacial Chemistry)
  • Article
  • Open Access
25 Citations
9,785 Views
20 Pages

Chemically Roughened Solid Silver: A Simple, Robust and Broadband SERS Substrate

  • Shavini Wijesuriya,
  • Krishna Burugapalli,
  • Ruth Mackay,
  • Godwin Chukwuebuka Ajaezi and
  • Wamadeva Balachandran

19 October 2016

Surface-enhanced Raman spectroscopy (SERS) substrates manufactured using complex nano-patterning techniques have become the norm. However, their cost of manufacture makes them unaffordable to incorporate into most biosensors. The technique shown in t...

(This article belongs to the Special Issue Applications of Raman Spectroscopy in Biosensors)
  • Article
  • Open Access
18 Citations
4,625 Views
15 Pages

Fabrication of Hydrophobic Ni Surface by Chemical Etching

  • Xiaojing Qian,
  • Tao Tang,
  • Huan Wang,
  • Changan Chen and ,
  • Junhong Luo and
  • Deli Luo
  • + 1 author+ 0 author

29 October 2019

Hydrophobic surfaces were successfully fabricated on pure nickel substrates by a one-step chemical etching process with different acidic solutions. The static water contact angle (SCA) of the etched Ni surfaces reached higher than 125°, showing e...

  • Article
  • Open Access
5 Citations
2,466 Views
15 Pages

Stable Loading of TiO2 Catalysts on the Surface of Metal Substrate for Enhanced Photocatalytic Toluene Oxidation

  • Le Xu,
  • Jiateng Chen,
  • Pengcheng Zhao,
  • Boxiong Shen and ,
  • Zijian Zhou and
  • Zhuozhi Wang
  • + 1 author+ 0 author

22 August 2023

To promote the practical application of TiO2 in photocatalytic toluene oxidation, the honeycomb aluminum plates were selected as the metal substrate for the loading of TiO2 powder. Surface-etching treatment was performed and titanium tetrachloride wa...

(This article belongs to the Special Issue Functional Nanomaterials in Green Chemistry)
  • Article
  • Open Access
25 Citations
4,246 Views
12 Pages

Effects of Ion Beam Etching on the Nanoscale Damage Precursor Evolution of Fused Silica

  • Yaoyu Zhong,
  • Yifan Dai,
  • Feng Shi,
  • Ci Song and ,
  • Ye Tian,
  • Zhifan Lin,
  • Wanli Zhang and
  • Yongxiang Shen
  • + 3 authors+ 0 author

13 March 2020

Nanoscale laser damage precursors generated from fabrication have emerged as a new bottleneck that limits the laser damage resistance improvement of fused silica optics. In this paper, ion beam etching (IBE) technology is performed to investigate the...

(This article belongs to the Special Issue In Situ TEM and AFM for Investigation of Materials)
  • Article
  • Open Access
2 Citations
2,604 Views
8 Pages

Etching Processing of InGaAs/InAlAs Quantum Cascade Laser

  • Qi Wu,
  • Yana Zhu,
  • Dongxin Xu,
  • Zaijin Li and ,
  • Yi Qu,
  • Zhongliang Qiao,
  • Guojun Liu,
  • Zhibin Zhao,
  • Lina Zeng and
  • Lin Li
  • + 6 authors+ 1 author

13 November 2024

The 3–5 μm mid-infrared band is the atmospheric window band, where there are absorption peaks of many molecules. It plays an important role in trace gas detection, directional infrared countermeasures, biomedicine, and free-space optical com...

(This article belongs to the Special Issue Advancements in Lasers: Applications and Future Trends)
  • Article
  • Open Access
472 Views
12 Pages

Simulation Analysis and Characteristic Research of High-Performance SAW Devices with Trapezoidal Piezoelectric Structures

  • Zhipeng Ma,
  • Shijun He,
  • Zhangrui Duan,
  • Lishuang Liu and ,
  • Jing Zeng and
  • Feng Li
  • + 1 author+ 0 author

The electromechanical coupling factor (K2) is one of the key parameters characterizing the performance of surface acoustic wave (SAW) devices. Conventional SAW structures suffer from a spatial mismatch between mechanical energy and electric fields, w...

(This article belongs to the Topic MEMS Sensors and Resonators, 2nd Edition)
  • Feature Paper
  • Article
  • Open Access
9 Citations
4,705 Views
20 Pages

The Effects of Chemical Etching and Ultra-Fine Grain Structure of Titanium on MG-63 Cells Response

  • Denis Nazarov,
  • Elena Zemtsova,
  • Vladimir Smirnov,
  • Ilya Mitrofanov and ,
  • Maxim Maximov,
  • Natalia Yudintceva and
  • Maxim Shevtsov
  • + 2 authors+ 0 author

19 March 2021

In this work, we study the influence of the surface properties of ultrafine grained (UFG) and coarse grained (CG) titanium on the morphology, viability, proliferation and differentiation of osteoblast-like MG-63 cells. Wet chemical etching in H2SO4/H...

(This article belongs to the Special Issue Surface Modification of Metallic Biomaterials)
  • Article
  • Open Access
2,761 Views
16 Pages

9 September 2022

We created a coke-repellent inner surface in a stainless steel (SS-321) tube using an enhanced chemical etching tactic. A water-borne etching solution was formulated by combining an ion sequestering ligand (L), hydrogen peroxide (H), hydrochloric ac...

(This article belongs to the Special Issue Metal Composites)
  • Article
  • Open Access
15 Citations
3,716 Views
11 Pages

Evaluation of Tensile Bond Strength between Self-Adhesive Resin Cement and Surface-Pretreated Zirconia

  • Mijoo Kim,
  • Reuben H. Kim,
  • Samuel C. Lee,
  • Thomas K. Lee and ,
  • Marc Hayashi,
  • Bo Yu and
  • Deuk-Won Jo
  • + 2 authors+ 0 author

24 April 2022

The tensile bond strength between zirconia subjected to different surface-pretreatment methods and methacryloyloxydecyl-dihydrogen-phosphate (MDP)-containing self-adhesive resin cement was evaluated herein. Eighty-eight cylindrical zirconia specimens...

(This article belongs to the Special Issue Advances in Periodontics and Restorative Dental Materials)
  • Article
  • Open Access
34 Citations
7,516 Views
11 Pages

11 August 2023

A typical method for normally-off operation, the metal–insulator–semiconductor-high electron mobility transistor (MIS-HEMT) has been investigated. Among various approaches, gate recessed MIS-HEMT have demonstrated a high gate voltage swee...

(This article belongs to the Special Issue III-V Optoelectronics and Semiconductor Process Technology)
  • Article
  • Open Access
29 Citations
6,499 Views
8 Pages

Focused Ion Beam Milling of Single-Crystal Sapphire with A-, C-, and M-Orientations

  • Qiuling Wen,
  • Xinyu Wei,
  • Feng Jiang,
  • Jing Lu and
  • Xipeng Xu

26 June 2020

Sapphire substrates with different crystal orientations are widely used in optoelectronic applications. In this work, focused ion beam (FIB) milling of single-crystal sapphire with A-, C-, and M-orientations was performed. The material removal rate (...

(This article belongs to the Special Issue Applications, Preparation and Characterization of Metal-Ceramic Nanocomposites)
  • Article
  • Open Access
6 Citations
3,909 Views
16 Pages

Convective Heat Transfer Enhancement through Laser-Etched Heat Sinks: Elliptic Scale-Roughened and Cones Patterns

  • Luigi Ventola,
  • Matteo Fasano,
  • Roberta Cappabianca,
  • Luca Bergamasco and ,
  • Francesca Clerici,
  • Luciano Scaltrito,
  • Eliodoro Chiavazzo and
  • Pietro Asinari
  • + 3 authors+ 0 author

15 March 2020

The efficient dissipation of localized heat flux by convection is a key request in several engineering applications, especially electronic ones. The recent advancements in manufacturing processes are unlocking the design and industrialization of heat...

(This article belongs to the Collection Advances in Heat Transfer Enhancement)

of 43