- Article
The single-pass second-harmonic generation (SHG) of a vortex beam under low fundamental wave depletion is systematically studied. Vortex modes at 1064 nm with integer topological charges from ±1 to ±9 and fractional ones at ±0.75...
The single-pass second-harmonic generation (SHG) of a vortex beam under low fundamental wave depletion is systematically studied. Vortex modes at 1064 nm with integer topological charges from ±1 to ±9 and fractional ones at ±0.75...
We describe a quantitative study of vortex generation due to non-equilibrium electrokinetics near a micro/nanochannel interface. The microfluidic device is comprised of a microchannel with a set of nanochannels. These perm-selective nanochannels indu...
We report on our investigation of a low Reynolds number non-equilibrium electrokinetic flow in a micro/nanochannel platform. Non-equilibrium electrokinetic phenomena include so-called concentration polarization in a moderate electric field and vortex...
The aim of this work is to design a piezoelectric power generation system that extracts power from the vibration of a cantilever beam. A semi-cylinder placed in a water stream and attached to the beam is excited into vortex-induced vibrations (VIV),...
This study aims to investigate the performance of a Maglev Vortex Rotor Organic Rankine Cycle (ORC) system for low-temperature waste heat recovery. The primary objective is to evaluate the net power generation and efficiency of the system under actua...
Tailoring the spatial and angular-momentum structure of high-harmonic radiation is an important route toward controllable extreme-ultraviolet structured light. Here, we introduce an orbital angular momentum (OAM)-resolved photon-channel framework to...
This study explores the feasibility of using an oscillating plate downstream of a cylindrical body to produce mechanical energy from a Von Kármán vortex street under sub-critical flow conditions (Re = 72,500). The study aims to quantify...
In this study, we demonstrate both theoretically and experimentally second harmonic generation (SHG) of a twisted vector vortex optical field (TVVOF) using a nonlinear type-II phase-matched β-BaB2O4 (BBO) crystal. Our study introduces a novel me...
Vortex generators are used to overturn the momentum of the flow in the boundary layer, thereby preventing flow separation, and are broadly used in aviation, wind power, heat exchange, and different fields. It has been determined that the capability o...
Labyrinth seals are widely employed in the air system of aircraft engines since they reduce the leakages occurring between blades and shrouds, which affect the entropy generation significantly. Excessive leakage flow of the labyrinth may be reduced t...
The hydrodynamic noise from the horseshoe vortex can greatly destroy the acoustic stealth of underwater vehicles at low frequency. We investigated the flow-induced noise suppression mechanism by mechanical vortex generators (VGs) on a SUBOFF model. B...
A hypothesis was tested and validated for predicting the vortex strength induced by a vortex generator in wall-bounded flow by combining the knowledge of the Vortex Generator (VG) geometry and the approaching boundary layer velocity distribution. In...
Delaying the onset of laminar-turbulent transition is an attractive method in reducing skin friction drag, especially on streamlined bodies where Tollmien–Schlichting instabilities are the dominating mechanism for transition. Miniature Vortex G...
Improving heat transfer from surface to airflow is a current research concern for enhancing energy efficiency. The use of vortex generators for improving heat transfer from the surface to the airflow is very effective. Therefore, this study focuses o...
An alula is a small structure of feathers that prevents birds from stalling. In this study, the aerodynamic effect of an alula-like vortex generator (alula-VG) on a revolving wing was investigated using the PIV technique in a water tank. The alula-VG...
Heat exchanger performance can be improved via the introduction of vortex generators to the airside surface, based on the mechanism that the generated longitudinal vortices can disrupt the boundary layer growth, increase the turbulence intensity and...
Vortex generators (VG) are passive flow control devices used for avoiding or delaying the separation of the boundary layer by bringing momentum from the higher layers of the fluid towards the surface. The Vortex generator usually has the same height...
An analysis of the generation of vortices and their effects by vane-type vortex generators (VGs) positioned on a three-dimensional flat plate with a backward-facing ramp and adverse gradient pressure is carried out. The effects of a conventional vort...
Flow separation is the source of several problems in a wind turbine including load fluctuations, lift losses, and vibrations. Vortex generators (VGs) are passive flow control devices used to delay flow separation, but their implementation may produce...
High heat flux dissipation from the Lithium-ion battery pack of hybrid electric vehicles is one of the major concerns in the automotive sector, since it directly affects the performance and it may also lead to permanent failure. Among various thermal...
Vortex generators are devices that modify the wind behavior near the surface of wind turbine blades. Their use allows the boundary layer shedding transition zone to be varied. Bio-inspired design has been used to improve the efficiency of aerodynamic...
To explore the effect of the height of vortex generators (VGs) on the control effect of boundary-layer flow, the vortex characteristics of a plate and the aerodynamic characteristics of an airfoil for VGs were studied by both wind tunnel experiments...
This study explored the use of diffuser shapes to enhance the performance of a solar updraft tower. A diffuser-shaped vortex generator, a simple device requiring no structural modifications to the tower, was installed at the chimney outlet. The gener...
The interaction between shock waves and turbulent boundary layers (SBLI) is a common phenomenon in transonic and supersonic aircraft wings. In this study, we simulated the SBLI of a classical NACA0012 wing at an angle of attack (AOA) of 1.4° and...
The paper presents the results of analytical and experimental studies of the hydrodynamics of the translational−rotational motion of incompressible gas flow within a working space of a variable-geometry vortex heat generator. The terminal veloc...
At present, vortex generators have been extensively used in radiators to improve the overall heat transfer performance. However, there is no research on the effect of vortex generators on the ends of motor coils. Meanwhile, the current research mainl...
As an important structured beam, vortex beams have a wide range of applications in many fields. However, conventional vortex beam generators require complex optical systems, and this problem is particularly serious with regards to focused vortex beam...
Vortex generators (VGs) are a passive method by which to alleviate boundary layer separation (BLS). The device-induced streamwise vortices propagate downstream. There is then lift-off from the surface and the vortex decays. The effectiveness of VGs d...
Vortex generators are used in aircraft wings and wind turbine blades. These devices allow them to maintain a stable turbulent behavior in the wind wake. Vortex generators, or VGs, improve the transition from laminar to turbulent boundary layer regime...
The global need for balance between energy generated from intermittent renewable sources and the actual demand has introduced severe operational challenges on hydropower, a steady energy source in the current context. Although it has some flexibility...
A shock wave/boundary layer interaction (SWBLI) is a common phenomenon in supersonic inlet flow, which can significantly degrade the aerodynamic performance of the inlet by inducing boundary layer separation. To address this issue, in this paper, we...
Vortex Generators (VGs) are applied before the expected region of separation of the boundary layer in order to delay or remove the flow separation. Although their height is usually similar to that of the boundary layer, in some applications, lower VG...
The increasing demand for effective flow control in supersonic boundary layers, particularly for mitigating shock-wave boundary-layer interactions, underscores the need to explore optimized micro-vortex generator (MVG) configurations. This study inve...
Rim-driven propellers (RDPs) have attracted renewed attention as an efficient propulsion concept for integrated electric propulsion systems, yet their structural configuration inherently limits duct geometry modification, and viscous losses associate...
In the complex and harsh working environment of wind turbines, the horizontal axis wind turbine blade is increasingly confronted with the issue of surface roughening. It leads to a decrease and instability in the output power of the horizontal axis w...
This paper focuses on the modeling and design of an adaptive vortex generator (AVG). The device is actuated through shape memory alloy (SMA) elements. The interest of the research community in these devices is due to their ability to improve the perf...
A novel hollow triangular conical-wing vortex generator (HTCVG) was proposed to enhance the heat transfer performance of a panel-type radiator for oil-immersed transformers. A numerical investigation was conducted to compare the HTCVG with a common d...
During the operation of wind turbines, flow separation appears at the blade roots, which reduces the aerodynamic efficiency of the wind turbine. In order to effectively apply vortex generators (VGs) to blade flow control, the effect of the VG spacing...
Vortex generators (VGs) are increasingly used in the wind turbine manufacture industry as flow control devices to improve rotor blade aerodynamic performance. Nevertheless, VGs may produce excess residual drag in some applications. The so-called sub-...
Vortex generators (VGs) attached to the leading edge of an agricultural aircraft are purported to control airflow over the upper surface of the wing by creating small vortices that delay boundary layer separation, thereby improving the performance of...
An effective way to enhance the heat transfer in mini and micro electronic devices is to use different shapes of micro-channels containing vortex generators (VGs). This attracts researchers due to the reduced volume of the electronic micro-chips and...
The vortex generator is extensively utilized to enhance the air-side flow and heat transfer in compact heat exchangers, attributed to its high efficiency and low friction factor. This paper contains an innovative design of biomimetic vortex generator...
Passive flow control devices are included in the design of wind turbine blades in order to obtain better performance and reduce loads without consuming any external energy. Vortex Generators are one of the most popular flow control devices, whose mai...
Nanofluids are an important technology for enhancing heat transfer in industrial applications by incorporating high thermal conductivity nanoparticles into base fluids. However, they often require higher pumping power and energy consumption. This stu...
In order to explore the effect of the installation angle of vortex generator (VG) on boundary-layer flow control, the vortex characteristics of plate VG and their effect on the aerodynamic characteristics of an airfoil was studied numerically and usi...
A convex corner models the upper surface of a deflected flap and shock-induced boundary layer separation occurs at transonic speeds. This study uses micro-vortex generators (MVGs) for flow control. An array of MVGs (counter-rotating vane type, ramp t...
In this paper, we review the generation of vortex beams carrying orbital angular momentum in the microwave domain. We firstly present the theory of Laguerre–Gaussian beams where it is demonstrated that they carry such type of momentum. We furth...
Creating secondary flows that encourage fluid interchange between hot and cold regions is frequently necessary to improve convective heat transfer in compact channels. A well-known passive method for enhancing mixing and boosting thermal performance...
Electromagnetic (EM) waves carrying orbital angular momentum (OAM) exhibit phase vortex and amplitude singularity. Broadband OAM generation with high efficiency is highly desired with suggested applications such as broadband imaging and communication...
We conducted a numerical study of the effects of a vortex generator (VG) on the combustion characteristics and physical fluid flow of LPG on a porous bluff-body slot burner (PBSB) model, validating the numerical and experimental results of the temper...
of 29