Skip to Content
You are currently on the new version of our website. Access the old version .

370 Results Found

  • Article
  • Open Access
2 Citations
4,352 Views
18 Pages

24 June 2022

This paper examines the application of surface drilling parameters and drilling optimization techniques, such as mechanical specific energy (MSE) and equivalent strength (EST), in detecting hydrate gas-bearing sediments during drilling operations. Ga...

(This article belongs to the Section H: Geo-Energy)
  • Article
  • Open Access
3 Citations
1,661 Views
24 Pages

26 June 2025

Single-lip deep-hole drilling is a key technology for the precision machining of high-temperature nickel-based alloy pore structures in aero engines. However, the intense thermo-mechanical coupling effects during machining can easily lead to surface...

(This article belongs to the Special Issue Design and Manufacturing for Lightweight Components and Structures)
  • Article
  • Open Access
17 Citations
3,667 Views
14 Pages

Effect of Drilling Parameters on Surface Roughness and Delamination of Ramie–Bamboo-Reinforced Natural Hybrid Composites

  • Krishna Kumar P,
  • Gaddam Lokeshwar,
  • Chamakura Uday Kiran Reddy,
  • Arun Jyotis and ,
  • Surendra Shetty,
  • Subash Acharya and
  • Nagaraja Shetty
  • + 2 authors+ 0 author

Plastics reinforced with glass fiber have a significant likelihood of being replaced by natural fiber hybrid composites (NFHCs). Making holes helps in part assembly, which is a crucial activity in the machining of composite constructions. As a result...

  • Article
  • Open Access
13 Citations
2,345 Views
19 Pages

16 November 2023

Most of the parts of furniture made of medium density fiberboards (MDF) require at least one hole to be assembled. The drilling technological parameters influence the quality of holes. Factors such as tip angle of the drill bit, feed rate, type and d...

(This article belongs to the Special Issue Wood Quality and Wood Processing)
  • Article
  • Open Access
2 Citations
1,439 Views
15 Pages

21 August 2025

To improve chip removal efficiency and drilling performance in oxygen-free copper, a multi-objective optimization of gun drilling process parameters was conducted using a response surface methodology and a genetic algorithm. The Box–Behnken Des...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
54 Citations
5,954 Views
21 Pages

Effect of Drilling Parameters and Tool Geometry on the Thrust Force and Surface Roughness of Aerospace Grade Laminate Composites

  • Çağın Bolat,
  • Uçan Karakılınç,
  • Bekir Yalçın,
  • Yahya Öz and ,
  • Çağlar Yavaş,
  • Berkay Ergene,
  • Ali Ercetin and
  • Fatih Akkoyun
  • + 3 authors+ 0 author

15 July 2023

Carbon fiber-reinforced plastics (CFRPs) have been specially developed to enhance the performance of commercial and military aircraft because of their strength, high stiffness-to-density ratios, and superior physical properties. On the other hand, fa...

(This article belongs to the Special Issue Manufacturing Methods or Processing Methods in Micromachines)
  • Article
  • Open Access
558 Views
32 Pages

12 June 2026

Drilling is often used to create holes in CFRP/AISI 316L hybrid stacks to facilitate the assembly process. Due to the non-uniform properties and difficult machinability of Cr-Ni-Mo AISI 316L steel, drilling CFRP/AISI 316L stacks poses significant cha...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
8 Citations
3,045 Views
22 Pages

Experimental Investigation and Modeling of Surface Roughness in BTA Deep Hole Drilling with Vibration Assisted

  • Xubo Li,
  • Chuanmiao Zhai,
  • Canjun Wang,
  • Ruiqin Wu and ,
  • Cunqiang Zang,
  • Shihao Zhang,
  • Bian Guo and
  • Yuewen Su
  • + 3 authors+ 0 author

26 December 2024

The surface roughness of hole machining greatly influences the mechanical properties of parts, such as early fatigue failure and corrosion resistance. The boring and trepanning association (BTA) deep hole drilling with axial vibration assistance is a...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
10 Citations
3,306 Views
14 Pages

Due to their light weight, low density, high-specificity strength, and ease of fiber surface treatment, natural-fiber-reinforced composites are recognized as the most suitable materials for interior part applications. Moreover, natural fibers are wid...

(This article belongs to the Special Issue Progress in Polymer Composites, Volume II)
  • Article
  • Open Access
1 Citations
1,025 Views
17 Pages

9 July 2025

To address the low drilling efficiency of the composite rod drill in gas extraction boreholes, key drilling parameters are optimized using coal-seam hardness grading tests and response surface methodology. By conducting mechanical tests on coal sampl...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
8 Citations
3,046 Views
17 Pages

Effect of Drilling Parameters on Machining Performance in Drilling Polytetrafluoroethylene

  • Jing Ni,
  • Xiaotian Zeng,
  • M. S. H. Al-Furjan,
  • Huijun Zhao and ,
  • Liming Guan,
  • Zhi Cui and
  • Lidong Han
  • + 2 authors+ 0 author

6 October 2022

Polytetrafluoroethylene (PTFE) plays an important role in semiconductor manufacturing. It is an important processing material for the key sealing components in the field of immersion lithography. The lack of research related to the mechanical process...

  • Article
  • Open Access
4 Citations
1,329 Views
17 Pages

4 February 2026

This study investigates the influence of hybrid additives and cutting parameters on the surface roughness (Ra) of drilled Glass Fiber Reinforced Polymer (GFRP) composites. Nine composite panels were fabricated with varying concentrations of wax (0%,...

(This article belongs to the Section Polymer Composites)
  • Article
  • Open Access
15 Citations
1,875 Views
20 Pages

11 September 2024

Many factors (material properties, drill bit type and size, drill bit wear, drilling parameters used, and machine-tool characteristics) affect the efficiency of the drilling process, which could be quantified through the delamination factor, thrust f...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
24 Citations
3,454 Views
16 Pages

Assessments of Process Parameters on Cutting Force and Surface Roughness during Drilling of AA7075/TiB2 In Situ Composite

  • S. Parasuraman,
  • I. Elamvazuthi,
  • G. Kanagaraj,
  • Elango Natarajan and
  • A. Pugazhenthi

31 March 2021

Reinforced aluminum composites are the basic class of materials for aviation and transport industries. The machinability of these composites is still an issue due to the presence of hard fillers. The current research is aimed to investigate the drill...

  • Article
  • Open Access
32 Citations
4,154 Views
17 Pages

Multiple Sensor Monitoring of CFRP Drilling to Define Cutting Parameters Sensitivity on Surface Roughness, Cylindricity and Diameter

  • Miguel Álvarez-Alcón,
  • Luis Norberto López de Lacalle and
  • Francisco Fernández-Zacarías

21 June 2020

Machining parameters affects the final quality of components made in carbon fiber reinforced plastic (CFRP) composite materials. In this framework, the work here presented aims at studying the right combination of cutting speed (vc) and feed rate (vf...

(This article belongs to the Special Issue Composites, Alloys and Advanced Processes for Manufacturing in Aeronautics and Aerospace)
  • Article
  • Open Access
13 Citations
3,008 Views
13 Pages

1 July 2022

Drilling is one of the oldest and most important methods of processing wood and wood-based materials. Knowing the optimum value of factors that affect the drilling process could lead both to high-quality furniture and low-energy consumption during th...

(This article belongs to the Special Issue Drilling Techniques of Solid Wood and Wood-Based Materials)
  • Article
  • Open Access
3 Citations
1,911 Views
16 Pages

7 September 2023

Hard and brittle materials have excellent physical and mechanical properties and are widely used in the fields of microelectronics and optoelectronics. However, due to their high hardness and brittleness, the machining quality of a workpiece struggle...

  • Article
  • Open Access
74 Citations
6,237 Views
16 Pages

3 February 2020

In industries such as aerospace and automotive, drilling many holes is commonly required to assemble different structures where machined holes need to comply with tight geometric tolerances. Multi-spindle drilling using a poly-drill head is an indust...

(This article belongs to the Special Issue Optimization and Simulation in Alloy Cutting Processes)
  • Article
  • Open Access
2 Citations
932 Views
22 Pages

28 April 2026

Carbon fiber-reinforced thermoplastic composite drilling is a secondary manufacturing process because the quality of drilled holes affects assembly system performance, structure, and sustainability. This paper compares all drill coating types and cut...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
9 Citations
2,718 Views
13 Pages

15 July 2024

This paper presents a unique approach to generate a number of cutting knowledge blocks for the surface roughness analysis of the drilling process for carbon-fiber-reinforced polymer composite (CFRP) materials. The influence of drilling on the surface...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
9 Citations
1,256 Views
25 Pages

Study on the Influence of Drilling Parameters on the Mechanical Properties and Pressure Relief Effect of Coal Rock

  • Yujiang Zhang,
  • Yexing Chen,
  • Shuai Zhang,
  • Guorui Feng and ,
  • Yuguo Wang,
  • Shule Li,
  • Qian Wang,
  • Bo Wang and
  • Liang Zhao
  • + 4 authors+ 0 author

26 March 2025

Based on considering the stress state distribution and potential failure surface of the specimen during uniaxial compression, the drilling parameters (layout, spacing, position) are set. Thoroughly understanding the influence of different drilling pa...

(This article belongs to the Special Issue Advances in Coal Processing, Utilization, and Process Safety)
  • Article
  • Open Access
38 Citations
3,271 Views
15 Pages

An Experimental Study on Drilling Behavior of Silane-Treated Cotton/Bamboo Woven Hybrid Fiber Reinforced Epoxy Polymer Composites

  • Karthik Aruchamy,
  • Sathish Kumar Palaniappan,
  • Rajeshkumar Lakshminarasimhan,
  • Bhuvaneshwaran Mylsamy and ,
  • Satish Kumar Dharmalingam,
  • Nimel Sworna Ross and
  • Sampath Pavayee Subramani
  • + 2 authors+ 0 author

18 July 2023

Machining is considered to be an important post-manufacturing process. Evaluation of machinability of natural-fiber-reinforced composites is important owing to its wide application spectrum. Current experiments focus on the drilling parameters of cot...

(This article belongs to the Special Issue Fiber Reinforced Polymer Composites: Mechanical Properties and Applications)
  • Article
  • Open Access
12 Citations
2,345 Views
17 Pages

11 August 2023

This paper aims to optimize the quality characteristics of the drilling process in glass fiber-reinforced polymer (GFRP) composites. It focuses on optimizing the drilling parameters with drill point angles concerning delamination damage and energy co...

  • Article
  • Open Access
38 Citations
5,277 Views
9 Pages

Analysis of Hole Quality and Chips Formation in the Dry Drilling Process of Al7075-T6

  • Numan Habib,
  • Aamer Sharif,
  • Aqib Hussain,
  • Muhammad Aamir and ,
  • Khaled Giasin,
  • Danil Yurievich Pimenov and
  • Umair Ali
  • + 2 authors+ 0 author

29 May 2021

Millions of holes are produced in many industries where efficient drilling is considered the key factor in their success. High-quality holes are possible with the proper selection of drilling process parameters, appropriate tools, and machine setup....

(This article belongs to the Special Issue Optimization and Analysis of Metal Cutting Processes)
  • Feature Paper
  • Article
  • Open Access
23 Citations
4,012 Views
14 Pages

Tool Wear and Surface Evaluation in Drilling Fly Ash Geopolymer Using HSS, HSS-Co, and HSS-TiN Cutting Tools

  • Mohd Fathullah Ghazali,
  • Mohd Mustafa Al Bakri Abdullah,
  • Shayfull Zamree Abd Rahim,
  • Joanna Gondro and ,
  • Paweł Pietrusiewicz,
  • Sebastian Garus,
  • Tomasz Stachowiak,
  • Andrei Victor Sandu,
  • Muhammad Faheem Mohd Tahir and
  • Mohamed Syazwan Osman
  • + 6 authors+ 1 author

26 March 2021

This paper reports on the potential use of geopolymer in the drilling process, with respect to tool wear and surface roughness. The objectives of this research are to analyze the tool life of three different economy-grade drill bit uncoated; high-spe...

(This article belongs to the Special Issue Properties of Amorphous Materials and Nanomaterials)
  • Article
  • Open Access
13 Citations
4,794 Views
13 Pages

2 April 2018

The application areas of carbon fiber reinforced plastics (CFRP) have been increasing day by day. The machining of CFRP with incorrect machining parameters leads in huge loss cost and time. Therefore, it is very important that the composite materials...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
2 Citations
3,211 Views
21 Pages

Online Estimation Method and Verification of Sampling Mass for Lunar Drilling in the Chang’E-6 Mission

  • Gao Zhang,
  • Lei Guo,
  • Weiwei Zhang,
  • Shengyuan Jiang and ,
  • Xiangjin Deng,
  • Nai Zhang and
  • Zongquan Deng
  • + 2 authors+ 0 author

The Chang’E-6 lunar mission successfully collected the lunar back surface and subsurface lunar regolith by excavating and drilling and returned the lunar regolith samples to the earth. Drilling–sampling system exhibits highly nonlinear characteristic...

(This article belongs to the Section Astronautics & Space Science)
  • Article
  • Open Access
2,530 Views
21 Pages

Single-Step Drilling Using Novel Modified Drill Bits Under Dry, Water, and Kerosene Conditions and Optimization of Process Parameters via MOGA-ANN and RSM

  • Sumitava Paul,
  • Barun Haldar,
  • Hillol Joardar,
  • Nripen Mondal and ,
  • Naser A. Alsaleh and
  • Maaz Akhtar
  • + 1 author+ 0 author

The burr removal and finishing of drilled hole walls typically require multiple post-processing steps. This experimental study introduces a novel single-step drilling approach using modified drill bits for simultaneous burr removal and surface finish...

  • Article
  • Open Access
1,205 Views
27 Pages

Experimental Investigation of Hot Drilling and Their Effect on the Damage Mechanisms in CFRP Nanocomposites

  • S. M. Shahabaz,
  • Niranjan N Prabhu,
  • Tanzila Nargis,
  • Krishna Kumar P and
  • Nagaraja Shetty

9 February 2026

Carbon fiber-reinforced polymer (CFRP) composites modified with alumina (Al2O3) and silicon carbide (SiC) nanoparticles were developed to produce hybrid nanocomposites with improved mechanical and thermal characteristics. This study investigates the...

  • Article
  • Open Access
474 Views
17 Pages

Nonlinear Dynamic Analysis of Drill-String System Coupling Rock Surface Morphology Evolution and Dry Friction Effect

  • Pengfei Deng,
  • Jinchao Zhang,
  • Xiaofan Wang,
  • Yiqiao Li and ,
  • Luyuan Gong and
  • Shengqiang Shen
  • + 1 author+ 0 author

29 June 2026

Stick–slip vibration, reversal, axial impact, and dynamic instability are major challenges in deep drilling operations and are closely associated with nonlinear bit–rock interaction. To investigate these phenomena, this study develops a n...

  • Article
  • Open Access
7 Citations
4,469 Views
22 Pages

Experimental Investigation on Machinability of Polypropylene Reinforced with Miscanthus Fibers and Biochar

  • Dinh Son Tran,
  • Victor Songmene,
  • Anh Dung Ngo,
  • Jules Kouam and ,
  • Arturo Rodriguez-Uribe,
  • Manjusri Misra and
  • Amar Kumar Mohanty
  • + 2 authors+ 0 author

6 March 2020

The machinability of composite materials depends on reinforcements, matrix properties, cutting parameters, and on the cutting tool used (material, coating, and geometry). For new composites, experimental studies must be performed in order to understa...

(This article belongs to the Special Issue Machinability of Metallic Materials and Composites)
  • Article
  • Open Access
17 Citations
3,980 Views
14 Pages

Experimental Assessment of Hole Quality and Tool Condition in the Machining of an Aerospace Alloy

  • Muhammad Aamir,
  • Aamer Sharif,
  • Muhammad Zeeshan Zahir,
  • Khaled Giasin and
  • Majid Tolouei-Rad

This paper deals with an experimental investigation of hole quality in Al2024-T3, which is one of the aerospace alloys used in aircraft fuselage skin due to its high level of resistance to fatigue crack propagation. The experiments are conducted with...

(This article belongs to the Special Issue Recent Advances in Smart Design and Manufacturing Technology)
  • Article
  • Open Access
12 Citations
9,574 Views
15 Pages

Research on the Drilling Performance of a Helical Point Micro Drill with Different Geometry Parameters

  • Zhiqiang Liang,
  • Suyan Zhang,
  • Xibin Wang,
  • Haixin Guo and ,
  • Tianfeng Zhou,
  • Li Jiao and
  • Pei Yan
  • + 2 authors+ 0 author

29 June 2017

During the micro-drilling process of stainless steel, the wear, fracture, and breakage of the micro-drill easily occur. Micro-drill geometry parameters have significant influence on the drilling performance of the micro-drill. Nowadays, the helical p...

(This article belongs to the Special Issue State-Of-The-Art Micromachining)
  • Article
  • Open Access
2 Citations
1,614 Views
21 Pages

The Impact of Drilling Parameters on Drilling Temperature in High-Strength Steel Thin-Walled Parts

  • Yupu Zhang,
  • Ruyu Li,
  • Yihan Liu,
  • Chengwei Liu and ,
  • Shutao Huang,
  • Lifu Xu and
  • Haicheng Shi
  • + 2 authors+ 0 author

1 August 2025

High-strength steel has high strength and low thermal conductivity, and its thin-walled parts are very susceptible to residual stress and deformation caused by cutting heat during the drilling process, which affects the machining accuracy and quality...

(This article belongs to the Special Issue Machine Automation: System Design, Analysis and Control)
  • Article
  • Open Access
15 Citations
5,742 Views
14 Pages

The Effect of TiN-, TiCN-, TiAlN-, and TiSiN Coated Tools on the Surface Defects and Geometric Tolerances of Holes in Multi-Spindle Drilling of Al2024 Alloy

  • Muhammad Aamir,
  • Adrian Davis,
  • William Keeble,
  • Ugur Koklu and ,
  • Khaled Giasin,
  • Ana Vafadar and
  • Majid Tolouei-Rad
  • + 2 authors+ 0 author

11 July 2021

The integrity of machined holes depends on many parameters, some of which are related to the cutting tool (geometry, coating, material). Other influential parameters are related to the machining process variables (spindle speed, feed rate, workpiece...

(This article belongs to the Special Issue Optimization and Analysis of Metal Cutting Processes)
  • Article
  • Open Access
11 Citations
3,506 Views
18 Pages

Fuzzy Logic-Based Prediction of Drilling-Induced Temperatures at Varying Cutting Conditions along with Analysis of Chips Morphology and Burrs Formation

  • Asim Ahmad Riaz,
  • Riaz Muhammad,
  • Naveed Ullah,
  • Ghulam Hussain and ,
  • Mohammed Alkahtani and
  • Waseem Akram
  • + 1 author+ 0 author

5 February 2021

Friction and plastic deformation at the tool–chips interaction during a dry drilling process results in temperature rise and promotes tool wear and surface roughness. In most of the components produced in industries, a drilling process is used to mak...

  • Feature Paper
  • Article
  • Open Access
45 Citations
8,522 Views
12 Pages

13 October 2016

Hole quality plays a crucial role in the production of close-tolerance holes utilized in aircraft assembly. Through drilling experiments of carbon fiber-reinforced plastic composites (CFRP), this study investigates the impact of varying drilling feed...

(This article belongs to the Special Issue Machining of Composites and Multi-Stacks of Aerospace Materials)
  • Article
  • Open Access
8 Citations
3,744 Views
19 Pages

Performance Analysis of Helical Milling and Drilling Operations While Machining Carbon Fiber-Reinforced Aluminum Laminates

  • Gururaj Bolar,
  • Anoop Aroor Dinesh,
  • Ashwin Polishetty,
  • Raviraj Shetty and ,
  • Anupama Hiremath and
  • V. L. Neelakantha
  • + 1 author+ 0 author

Being a difficult-to-cut material, Fiber Metal Laminates (FML) often pose challenges during conventional drilling and require judicious selection of machining parameters to ensure defect-free laminates that can serve reliably during their service lif...

(This article belongs to the Topic Advanced Composites Manufacturing and Plastics Processing)
  • Article
  • Open Access
2 Citations
2,668 Views
17 Pages

20 May 2022

The borehole drilling distance is short in soft and gas outburst-prone coal seams because of drill pipe jamming induced by cuttings accumulating in the borehole, hindering coal mine gas hazard prevention and utilization. A surface multi-hole (SMH) dr...

  • Article
  • Open Access
27 Citations
4,394 Views
15 Pages

Evaluation of the Surface Defects and Dimensional Tolerances in Multi-Hole Drilling of AA5083, AA6061, and AA2024

  • Muhammad Aamir,
  • Majid Tolouei-Rad,
  • Khaled Giasin,
  • Ana Vafadar and ,
  • Ugur Koklu and
  • William Keeble
  • + 1 author+ 0 author

10 May 2021

Drilling is one of the most performed machining operations for riveting and assembly operations in many industrial sectors. The accuracy of the drilled holes and their surface finish play a vital role in the longevity and performance of the machined...

(This article belongs to the Special Issue Advanced Manufacturing of Metals)
  • Article
  • Open Access
2,510 Views
14 Pages

Research on the Prediction of Drilling Rate in Geological Core Drilling Based on the BP Neural Network

  • Da Gong,
  • Yutong Zu,
  • Zheng Zhou,
  • Mingrang Jia and ,
  • Jiachen Liu and
  • Yuanbiao Hu
  • + 1 author+ 0 author

31 October 2024

The development of automation and intelligence in geological core drilling is not yet mature. The selection and improvement of drilling parameters rely mainly on experience, and adjustments are often made after drilling by evaluating the core, which...

(This article belongs to the Section Applied Industrial Technologies)
  • Article
  • Open Access
5 Citations
4,539 Views
15 Pages

Comparative Analysis of the Chemical Composition and Microstructure Conformation Between Different Dental Implant Bone Drills

  • Gaetano Marenzi,
  • Josè Camilla Sammartino,
  • Fabio Scherillo,
  • Carlo Rengo and ,
  • Alfredo De Rosa,
  • Vincenzo Graziano and
  • Gianrico Spagnuolo
  • + 2 authors+ 0 author

9 June 2019

Background: Hardness is considered an important parameter for evaluating the clinical performance of dental implant bone drills. It is connected to the chemical composition, microstructure conformation and manufacture of the surgical drills. Methods:...

(This article belongs to the Special Issue Advanced Materials for Oral and Dentofacial Surgery)
  • Article
  • Open Access
32 Citations
4,922 Views
13 Pages

Effect of Cutting Parameters and Tool Geometry on the Performance Analysis of One-Shot Drilling Process of AA2024-T3

  • Muhammad Aamir,
  • Khaled Giasin,
  • Majid Tolouei-Rad,
  • Israr Ud Din and ,
  • Muhammad Imran Hanif,
  • Ugur Kuklu,
  • Danil Yurievich Pimenov and
  • Muhammad Ikhlaq
  • + 3 authors+ 0 author

23 May 2021

Drilling is an important machining process in various manufacturing industries. High-quality holes are possible with the proper selection of tools and cutting parameters. This study investigates the effect of spindle speed, feed rate, and drill diame...

(This article belongs to the Special Issue Optimization and Analysis of Metal Cutting Processes)
  • Article
  • Open Access
27 Citations
6,944 Views
14 Pages

Intraosseous Temperature Change during Installation of Dental Implants with Two Different Surfaces and Different Drilling Protocols: An In Vivo Study in Sheep

  • Michele Stocchero,
  • Yohei Jinno,
  • Marco Toia,
  • Marianne Ahmad and ,
  • Evaggelia Papia,
  • Satoshi Yamaguchi and
  • Jonas P. Becktor
  • + 2 authors+ 0 author

11 August 2019

Background: The intraosseous temperature during implant installation has never been evaluated in an in vivo controlled setup. The aims were to investigate the influence of a drilling protocol and implant surface on the intraosseous temperature during...

(This article belongs to the Special Issue Osseointegrated Oral implants: Mechanisms of Implant Anchorage, Threats and Long-Term Survival Rates)
  • Feature Paper
  • Article
  • Open Access
6 Citations
2,218 Views
18 Pages

19 January 2024

This article presents the results of an experimental study on the effect of the selection of kinematic system for the drilling process on the cylindricity deviation, roundness deviation, diameter error and surface roughness of holes in brass alloy. T...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
27 Citations
3,892 Views
15 Pages

27 May 2022

This paper aims to optimize the machining parameters of the drilling process of woven-glass-fiber reinforced epoxy (WGFRE) composites. It will focus on modeling and optimizing drill spindle speed and feed with different laminate thicknesses, with res...

  • Article
  • Open Access
23 Citations
6,245 Views
14 Pages

Hybrid Reinforced Magnesium Matrix Composites (Mg/Sic/GNPs): Drilling Investigation

  • Mustafa M. Abdulgadir,
  • Bilge Demir and
  • Muhammet Emre Turan

27 March 2018

The machinability of graphene-reinforced magnesium-based hybrid nanocomposites produced through the application of powder metallurgy method has not been completely reported. This article presents an experimental investigation on the thrust force, the...

  • Article
  • Open Access
4 Citations
1,152 Views
20 Pages

Effect of Cutting Tool Structures on CFRP Interlaminar Drilling

  • Peng Yang,
  • Qingqing Li,
  • Shujian Li,
  • Pengnan Li and
  • Tengfei Chang

5 October 2025

The interlaminar drilling of CFRPs is a new machining method different from traditional drilling, in which the feed direction of the drill bit is parallel to the interlayer interface. To reasonably select tools for CFRP interlaminar drilling, four di...

(This article belongs to the Section Advanced Manufacturing)
  • Article
  • Open Access
12 Citations
5,450 Views
13 Pages

Harnessing Deep-Hole Drilling to Fabricate Air-Structured Polymer Optical Fibres

  • Eneko Arrospide,
  • Iñaki Bikandi,
  • Igor Larrañaga,
  • Xabier Cearsolo and ,
  • Joseba Zubia and
  • Gaizka Durana
  • + 1 author+ 0 author

24 October 2019

The performance of a precisely controlled drilling technique is critical in the fabrication process of microstructured polymer optical fibres. For the creation of a holey preform, adequate drilling bits with large length-to-diameter ratios provide th...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
9 Citations
3,735 Views
23 Pages

Investigation of Heat Annealing and Parametric Optimization for Drilling of Monel-400 Alloy

  • Basem M. A. Abdo,
  • Redhwan Almuzaiqer,
  • Mohammed A. Noman and
  • Sanjay Chintakindi

A nickel-based copper alloy known as Monel-400 is extensively applied in many industries including aerospace, marine engineering, and nuclear power generation, owing to its exceptional characteristics such as extreme tensile strength and toughness, e...

(This article belongs to the Special Issue Manufacturing Process Development of Advanced Composite Materials)

of 8