Current source inverters (CSIs) have exhibited significant potential in variable-speed motor drive applications, attributed to their superior dynamic response and robust anti-interference capabilities. Space vector pulse-width modulation (SVPWM) is r...
This paper presents a novel switching frequency optimized space vector pulse width modulation (SVPWM) scheme for cascaded multilevel inverters. The proposed SVPWM is developed in a α′β′ coordinate system, in which the voltage vectors have only intege...
With the advancement in power electronics technology, variable-frequency drives have been widely adopted for motor operation due to their inherent benefits: control performance, extending equipment life, and energy savings. The most used technique is...
Dual Y shift 30° six-phase motors are expected to be extensively applied in high-power yet energy-effective fields, and a harmonic-suppressing control strategy plays a vital role in extending their prominent features of low losses and ultra-quiet ope...
In a DC distribution system configured by AC/DC power conversion system (PCS), the voltage control performance of the AC/DC PCS determines the stability and reliability of the DC distribution grid. The DC voltage of grid is maintained by capacitor, t...
Permanent magnet synchronous motors (PMSMs) are widely used in a variety of fields such as aviation, aerospace, marine, and industry due to their high angular position accuracy, energy conversion efficiency, and fast response. However, driving errors...
In a matrix converter, the frequencies of output voltage harmonics are related to the frequencies of input, output, and carrier signals, which are independent of each other. This nature may cause an inaccurate harmonic spectrum when using conventiona...
In the control system of a permanent magnet synchronous motor (PMSM) driven by an inverter, the conventional space vector pulse width modulation (SVPWM) strategy introduces high-frequency current harmonics at the switching frequency and its multiples...
High-performance overmodulation strategies for voltage source inverters (VSIs) can further broaden the operation range of machines. Among them, Space Vector Pulse Width Modulation (SVPWM) is worth researching as it performs well in digital implementa...
In this paper, one model of flexible space-vector-based hybrid pulse width modulation (HPWM) transition algorithm consisting of selective harmonic elimination pulse width modulation (SHEPWM) and selective harmonic mitigation pulse width modulation (S...
The duty cycle space vector (DCSV) modulation strategy is of universal significance, and the method can be utilized for different modulation approaches. In this paper, the vectors of input voltages and currents are equivalently represented by a compl...
Vienna rectifiers are widely used, but they have problems of zero-crossing current distortion and midpoint potential imbalance. In this paper, an improved hybrid modulation strategy is proposed. According to the phase difference between the reference...
To address the harmonic issues associated with the pulse width modulation (PWM) method, this article introduces variable delayed time (VDT) space vector pulse width modulation (SVPWM) with double central symmetry for dual three-phase permanent magnet...
On the basis of the space voltage vector pulse width modulation (SVPWM) technique, the random pulse width modulation (RPWM) technique, which can reduce harmonics, is investigated based on the vector control system of permanent magnet synchronous moto...
Considering that the defects of traditional nearest–two–vector SVPWM (NTV–SVPWM) have a low voltage transfer ratio (VTR) and those of nearest–four–vector SVPWM (NFV–SVPWM) have a high output current harmonic, two i...
The aim of this paper is to present the real-time implementation and measurements of a reduced switch count in space vector pulse width modulation for three-level neutral point clamped inverters (3L-NPC). We implement space vector pulse width modulat...
The matrix converter (MC) is the n-phase input and m-phase output power electronic system. To synthesis the controllable sinusoidal output voltage and input current with controllable input displacement angle, the pulse width modulation method (PWM) i...
Inverter-based systems encounter significant challenges in mitigating common-mode voltage (CMV) and minimizing inverter losses. Despite various space vector pulse-width modulation (SVPWM) techniques proposed to address these issues, a comprehensive c...
The recently proposed novel unidirectional multilevel rectifier, a three single-phase star-connected multilevel rectifier, has the characteristic of having a large number of DC-side capacitors and a complex capacitor voltage balancing control structu...
A method is proposed for reducing speed ripple of permanent magnet synchronous motors (PMSMs) controlled by space vector pulse width modulation (SVPWM). A flux graph and mathematics are used to analyze the speed ripple characteristics of the PMSM. An...
Conventional space vector pulse width modulation (CSVPWM) with the fixed switching frequency generates significant sideband harmonics in the three-phase voltage. Discrete random switching frequency SVPWM (DRSF-SVPWM) methods have been widely applied...
This paper proposes a decentralized control structure and method for a multilevel single-phase power converter using space vector pulse width modulation (SVPWM). The focus of this paper is on the decentralized control structure for the power converte...
This work presents a comparison of three different modulation techniques applied to modular multilevel converters (MMCs). The three modulation strategies studied in this paper are the phase-shifted sinusoidal pulse width modulation (PS-SPWM), the spa...
A space vector pulse width modulation (SVPWM) algorithm is an important part of the permanent magnet synchronous machine (PMSM) drive to achieve direct current (DC) to alternating current (AC) conversion. The execution of the conventional SVPWM algor...
The unified power quality conditioners (UPQCs) are useful to correct distortions in voltage and current waveforms in case of problems related to harmonics, flicker, and power factor. The dual topology of the UPQC allows a loop control in the inverter...
In this paper, the effect of common-mode voltage generated in the three-level quasi-switched boost T-type inverter is minimized by applying the proposed space-vector modulation technique, which uses only medium vectors and zero vector to synthesize t...
Medium-voltage energy storage converter equipment is an important component of the new generation of ship power and power systems. Virtual space vector pulse width modulation, as a modulation optimization method to improve the neutral-point voltage i...
An improved segment reduction-based space vector pulse width modulation (SVPWM) for an F-type three-level inverter (FT2LI) is presented in this article. The proposed SVPWM algorithm decreases the additional switching state transition of each triangle...
Model predictive control (MPC) has been proven to offer excellent model-based, highly dynamic control performance in grid converters. The increasingly higher power capacity of a PV inverter has led to the industrial preference of adopting higher DC v...
Energy quality problems can cause diverse failures of sensitive equipment. Dynamic voltage restorers (DVRs) are devices that have been proposed to protect sensitive loads from voltage sag effects. However, the compensation capacity of DVRs is limited...
This paper gives the current regulator design for a dual Y shift 30 degrees permanent magnet synchronous motor (DT_PMSM) based on the vector space decomposition (VSD). Current regulator design in α-β subspace is insufficient and designing...
Multiphase drives have received a lot of interest because of their several features over traditional three-phase systems for high-power applications. Pulse-width modulation (PWM) approaches are necessary to regulate the supply for multiphase ac drive...
This study aims to develop a 30 kHz/12 kW silicon carbide (SiC)/Si integrated hybrid power module (iHPM) for variable frequency drive applications, particularly industrial servo motor control, and, additionally, to theoretically and experimentally as...
Common-Mode Voltage (CMV) induces shaft voltage and bearing current due to the electrical interaction with the parasitic capacitance of the motor. CMV, shaft voltage, and bearing current are considered the major causes of bearing fault. Motor fault i...
The pulse width modulation (PWM) is an important segment in power electronic inverters and multilevel inverters (MLIs) design. The space vector modulation (SVM) methods own distinct advantages over other PWM methods. However, MLI SVM has involved mor...
Single-phase 3-level neutral point clamped cascaded rectifier (3LNPC-CR) has been successfully made its way into traction drive system as a high-voltage traction converter. In this passage, the control issue of the 3LNPC-CR is considered. A transient...
Aiming at the problem of large magnitude and high frequency of common-mode voltage (CMV) when space vector pulse width modulation (SVPWM) is used in a three-phase motor fed by a two-level voltage source inverter, a common-mode reduction SVPWM (CMRSVP...
In order to reduce the common-mode voltage (CMV) generated by the use of space vector pulse width modulation (SVPWM) in two-level three-phase voltage source inverters, a low common-mode SVPWM method is proposed. In this method, the voltage plane is d...
In the permanent magnet synchronous motor (PMSM) drive system, the unwilling and ear-piercing vibro-acoustics caused by high-frequency sideband harmonics becomes unacceptable in electric vehicle applications. In this paper, a modified space vector pu...
The torque pulsation and speed pulsation of a six-phase induction machine with double Y-connected windings displaced by 30° increase after one phase of the stator winding is open-circuited. To reduce the pulsations, a method of six-phase space ve...
The pulse width modulation (PWM) inverter is an obvious choice for any industrial and power sector application. Particularly, industrial drives benefit from the higher DC-link utilization, acoustic noise, and vibration industrial standards. Many PWM...
Due to their advantages of high power density and high efficiency, permanent magnet synchronous machines (PMSMs) are widely used in the field of electric vehicles (EVs). Vibration and noise are important indicators for evaluating the performance of P...
The custom power park (CPP) is a concept that has been developed for the purpose of dealing with power quality problems. The CPP is powered by two independent feeders and consists of different types of custom power devices for compensation (dynamic v...
PWM (pulse width modulation) is the most widely applied current conversion technology, but the high-frequency harmonics it causes have a significant negative impact on inverter system performance. This paper focuses on the three-phase T-type three-le...
A single-phase three-level converter is suitable for medium-power applications, with an interface voltage that is higher than that of a traditional two-level configuration. The three-level neutral-point clamped converter is adopted using four switche...
This paper presents a novel three-phase current source rectifier (CSR) for AC/DC step-down voltage conversion to reduce voltage and current stress. The proposed converter features an asymmetrical connection between upper and lower arms compared with...
This paper introduces an open-source software framework for implementing Field-Oriented Control (FOC) on a Brushless DC Motor (BLDC) across its entire speed range. The control strategy employs a Direct FOC method with a single Hall sensor combined wi...
The modeling of conduction and switching losses for insulated gate bipolar transistors (IGBTs) and free-wheeling diodes (FWDs) in automobile applications is becoming increasingly important, especially for the improvement of the system efficiency and...
Permanent magnet synchronous motor (PMSM) AC servo system has the characteristics of uncertainty, time-varying, nonlinear and fractional order. Applying the traditional control method is difficult to achieve the desired control effect. The fuzzy cont...
The quasi-Z-source T-type inverter is a new type of three-level inverter. Compared with other three-level inverters, the quasi-z-source T-type inverter is characterized by its fault tolerance capability and boost capability. In the inverter, the modu...
of 5