Skip to Content

192 Results Found

  • Article
  • Open Access
15 Citations
5,594 Views
14 Pages

Post-Processing Trimming of Silicon Photonic Devices Using Femtosecond Laser

  • Yating Wu,
  • Hongpeng Shang,
  • Xiaorui Zheng and
  • Tao Chu

13 March 2023

Fabrication errors inevitably occur in device manufacturing owing to the limited processing accuracy of commercial silicon photonic processes. For silicon photonic devices, which are mostly processing-sensitive, their performances usually deteriorate...

(This article belongs to the Special Issue Nano-Optics and Nano-Optoelectronics: Challenges and Future Trends)
  • Review
  • Open Access
14 Citations
10,063 Views
46 Pages

9 June 2025

Silicon carbide (SiC) materials have demonstrated promising application prospects in modern manufacturing due to their outstanding physical and chemical properties. With its process flexibility and formation feasibility, binder jetting 3D printing te...

(This article belongs to the Special Issue 3D Printing Technologies and Additive Manufacturing: Recent Advances and Applications)
  • Proceeding Paper
  • Open Access
1 Citations
1,997 Views
4 Pages

We report the design and implementation of a unique, wafer sized stretchable and bendable monolithic silicon matrix structure. The achieved stretchability allows for simultaneous omnidirectional folding, required to conform the structure to complex c...

(This article belongs to the Proceedings of EUROSENSORS 2018)
  • Article
  • Open Access
33 Citations
7,063 Views
15 Pages

Patient-Specific 3D Printed Soft Models for Liver Surgical Planning and Hands-On Training

  • Arnau Valls-Esteve,
  • Aitor Tejo-Otero,
  • Pamela Lustig-Gainza,
  • Irene Buj-Corral and ,
  • Felip Fenollosa-Artés,
  • Josep Rubio-Palau,
  • Ignasi Barber-Martinez de la Torre,
  • Josep Munuera,
  • Constantino Fondevila and
  • Lucas Krauel
  • + 5 authors+ 0 author

16 April 2023

Background: Pre-surgical simulation-based training with three-dimensional (3D) models has been intensively developed in complex surgeries in recent years. This is also the case in liver surgery, although with fewer reported examples. The simulation-b...

(This article belongs to the Special Issue 3D Printing of Gel-Based Materials)
  • Article
  • Open Access
5 Citations
2,869 Views
11 Pages

A Study on the Surface Quality and Damage Properties of Single-Crystal Silicon Using Different Post-Treatment Processes

  • Wei Li,
  • Fangyuan Zha,
  • Bo Fu,
  • Yanglong Li and ,
  • Jiazhu Duan and
  • Ziyou Zhou
  • + 1 author+ 0 author

17 January 2024

Detecting subsurface defects in optical components has always been challenging. This study utilizes laser scattering and photothermal weak absorption techniques to detect surface and subsurface nano-damage precursors of single-crystal silicon compone...

  • Article
  • Open Access
1 Citations
3,853 Views
12 Pages

Post-Acquisition Hyperpolarized 29Silicon Magnetic Resonance Image Processing for Visualization of Colorectal Lesions Using a User-Friendly Graphical Interface

  • Caitlin V. McCowan,
  • Duncan Salmon,
  • Jingzhe Hu,
  • Shivanand Pudakalakatti and ,
  • Nicholas Whiting,
  • Jennifer S. Davis,
  • Daniel D. Carson,
  • Niki M. Zacharias,
  • Pratip K. Bhattacharya and
  • Mary C. Farach-Carson
  • + 5 authors+ 0 author

Medical imaging devices often use automated processing that creates and displays a self-normalized image. When improperly executed, normalization can misrepresent information or result in an inaccurate analysis. In the case of diagnostic imaging, a f...

(This article belongs to the Section Medical Imaging and Theranostics)
  • Article
  • Open Access
13 Citations
10,438 Views
9 Pages

19 October 2011

A high Q-factor (quality-factor) spiral inductor fabricated by the CMOS (complementary metal oxide semiconductor) process and a post-process was investigated. The spiral inductor is manufactured on a silicon substrate. A post-process is used to remov...

(This article belongs to the Special Issue Modeling, Testing and Reliability Issues in MEMS Engineering 2011)
  • Article
  • Open Access
9 Citations
11,277 Views
18 Pages

Alternative Post-Processing on a CMOS Chip to Fabricate a Planar Microelectrode Array

  • Francisco López-Huerta,
  • Agustín L. Herrera-May,
  • Johan J. Estrada-López,
  • Carlos Zuñiga-Islas and ,
  • Blanca Cervantes-Sanchez,
  • Enrique Soto and
  • Blanca S. Soto-Cruz
  • + 2 authors+ 0 author

22 November 2011

We present an alternative post-processing on a CMOS chip to release a planar microelectrode array (pMEA) integrated with its signal readout circuit, which can be used for monitoring the neuronal activity of vestibular ganglion neurons in newborn Wist...

(This article belongs to the Special Issue Biochips)
  • Article
  • Open Access
17 Citations
3,897 Views
13 Pages

Effect of Heat Treatment on Microstructure and Selective Corrosion of LPBF-AlSi10Mg by Means of SKPFM and Exo-Electron Emission

  • Marina Cabrini,
  • Sergio Lorenzi,
  • Cristian Testa,
  • Diego Manfredi and ,
  • Mariangela Lombardi,
  • Alberta Aversa,
  • Francesco Andreatta,
  • Lorenzo Fedrizzi,
  • Yuri Dekhtyar and
  • Tommaso Pastore
  • + 6 authors+ 1 author

27 September 2021

The paper deals with the evolution of the microstructure of AlSi10Mg alloy obtained by laser powder bed fusion (LPBF), as a function of the post-processing heat treatment temperature. This was approached by complementary methods including FE-scanning...

(This article belongs to the Special Issue Corrosion in Additive Manufacturing)
  • Proceeding Paper
  • Open Access
1 Citations
2,666 Views
4 Pages

This research effort is focused on the development of large angle, out-of-plane bimorph MEMS micromirrors fabricated in the PolyMUMPs foundry process. Based on design constraints of the PolyMUMPs process, current designs fabricated do not meet the re...

(This article belongs to the Proceedings of Proceedings of Eurosensors 2017, Paris, France, 3–6 September 2017)
  • Article
  • Open Access
68 Citations
10,625 Views
15 Pages

Additive Manufactured 316L Stainless-Steel Samples: Microstructure, Residual Stress and Corrosion Characteristics after Post-Processing

  • Suvi Santa-aho,
  • Mika Kiviluoma,
  • Tuomas Jokiaho,
  • Tejas Gundgire and ,
  • Mari Honkanen,
  • Mari Lindgren and
  • Minnamari Vippola
  • + 2 authors+ 0 author

20 January 2021

Additive manufacturing (AM) is a relatively new manufacturing method that can produce complex geometries and optimized shapes with less process steps. In addition to distinct microstructural features, residual stresses and their formation are also in...

(This article belongs to the Special Issue Metal Additive Manufacturing – State of the Art 2020)
  • Article
  • Open Access
4 Citations
3,178 Views
16 Pages

This paper presents a post-processing algorithm for a true random number generator (TRNG). Once the randomness of security key generation deteriorates for any reason, the entire chain of the security system can be compromised, increasing the odds of...

(This article belongs to the Special Issue Advanced Security Protection Mechanism in Networks)
  • Article
  • Open Access
2 Citations
6,869 Views
11 Pages

17 January 2014

The fabrication and characterization of a radio frequency (RF) micromachined switch with annealing were presented. The structure of the RF switch consists of a membrane, coplanar waveguide (CPW) lines, and eight springs. The RF switch is manufactured...

(This article belongs to the Special Issue Modeling, Testing and Reliability Issues in MEMS Engineering 2013)
  • Article
  • Open Access
9 Citations
2,290 Views
14 Pages

31 October 2023

This study develops a photovoltaic microgenerator based on the complementary metal oxide semiconductor (CMOS) process. The photovoltaic microgenerator converts the absorbed light energy into electrical energy using the photovoltaic effect. The materi...

(This article belongs to the Special Issue MEMS/NEMS Devices and Applications, 2nd Edition)
  • Article
  • Open Access
19 Citations
9,754 Views
12 Pages

Fabrication and Characterization of CMOS-MEMS Magnetic Microsensors

  • Chen-Hsuan Hsieh,
  • Ching-Liang Dai and
  • Ming-Zhi Yang

29 October 2013

This study investigates the design and fabrication of magnetic microsensors using the commercial 0.35 μm complementary metal oxide semiconductor (CMOS) process. The magnetic sensor is composed of springs and interdigitated electrodes, and it is actu...

(This article belongs to the Special Issue Modeling, Testing and Reliability Issues in MEMS Engineering 2013)
  • Feature Paper
  • Article
  • Open Access
19 Citations
7,354 Views
15 Pages

A Scalable and Low Stress Post-CMOS Processing Technique for Implantable Microsensors

  • Ah-Hyoung Lee,
  • Jihun Lee,
  • Farah Laiwalla,
  • Vincent Leung and ,
  • Jiannan Huang,
  • Arto Nurmikko and
  • Yoon-Kyu Song
  • + 2 authors+ 0 author

5 October 2020

Implantable active electronic microchips are being developed as multinode in-body sensors and actuators. There is a need to develop high throughput microfabrication techniques applicable to complementary metal–oxide–semiconductor (CMOS)-based silicon...

(This article belongs to the Section B: Biology and Biomedicine)
  • Communication
  • Open Access
5 Citations
4,481 Views
12 Pages

17 February 2021

A radio frequency microelectromechanical system switch (MSS) manufactured by the complementary metal oxide semiconductor (CMOS) process is presented. The MSS is a capacitive shunt type. Structure for the MSS consists of coplanar waveguide (CPW) lines...

(This article belongs to the Special Issue CMOS-MEMS/NEMS Devices and Sensors)
  • Article
  • Open Access
13 Citations
4,333 Views
13 Pages

Fabrication of Natural Flake Graphite/Ceramic Composite Parts with Low Thermal Conductivity and High Strength by Selective Laser Sintering

  • Haihua Wu,
  • Kui Chen,
  • Yafeng Li,
  • Chaoqun Ren and ,
  • Yu Sun and
  • Caihua Huang
  • + 1 author+ 0 author

14 February 2020

The 3D graphite/ceramic composite prototyping parts directly prepared by selective laser sintering (SLS) were porous, which led to poor strength and low thermal conductivity. In order to obtain low thermal conductivity and high strength, its thermal...

(This article belongs to the Special Issue Progress in 3D Printing of Materials)
  • Article
  • Open Access
13 Citations
13,218 Views
13 Pages

Manufacture of Micromirror Arrays Using a CMOS-MEMS Technique

  • Pin-Hsu Kao,
  • Ching-Liang Dai,
  • Cheng-Chih Hsu and
  • Chyan-Chyi Wu

6 August 2009

In this study we used the commercial 0.35 µm CMOS (complementary metal oxide semiconductor) process and simple maskless post-processing to fabricate an array of micromirrors exhibiting high natural frequency. The micromirrors were manufactured from a...

(This article belongs to the Special Issue Modeling, Testing and Reliability Issues in MEMS Engineering - 2009)
  • Article
  • Open Access
15 Citations
3,191 Views
17 Pages

Thermoelectric Energy Micro Harvesters with Temperature Sensors Manufactured Utilizing the CMOS-MEMS Technique

  • Yi-Xuan Shen,
  • Yao-Chuan Tsai,
  • Chi-Yuan Lee,
  • Chyan-Chyi Wu and
  • Ching-Liang Dai

5 August 2022

This study develops a TEMH (thermoelectric energy micro harvester) chip utilizing a commercial 0.18 μm CMOS (complementary metal oxide semiconductor) process. The chip contains a TEMH and temperature sensors. The TEMH is established using a series...

(This article belongs to the Special Issue CMOS-MEMS Fabrication Technologies and Devices)
  • Article
  • Open Access
31 Citations
6,291 Views
16 Pages

Delamination Detection in Polymeric Ablative Materials Using Pulse-Compression Thermography and Air-Coupled Ultrasound

  • Stefano Laureti,
  • Muhammad Khalid Rizwan,
  • Hamed Malekmohammadi,
  • Pietro Burrascano and ,
  • Maurizio Natali,
  • Luigi Torre,
  • Marco Rallini,
  • Ivan Puri,
  • David Hutchins and
  • Marco Ricci
  • + 5 authors+ 0 author

13 May 2019

Ablative materials are used extensively in the aerospace industry for protection against high thermal stresses and temperatures, an example being glass/silicone composites. The extreme conditions faced and the cost-risk related to the production/oper...

(This article belongs to the Special Issue Infrared Thermography and Additional Non-Destructive Testing for Building, Structure and Material Inspections)
  • Article
  • Open Access
57 Citations
10,093 Views
9 Pages

8 February 2013

This paper presents the fabrication and characterization of energy harvesting thermoelectric micro generators using the commercial complementary metal oxide semiconductor (CMOS) process. The micro generator consists of 33 thermocouples in series. The...

(This article belongs to the Special Issue Modeling, Testing and Reliability Issues in MEMS Engineering 2013)
  • Article
  • Open Access
5 Citations
2,304 Views
12 Pages

28 November 2024

Surface wettability, the interaction between a liquid droplet and the surface it contacts, plays a key role in influencing droplet behavior and flow dynamics. There is a growing interest in designing surfaces with tailored wetting properties across d...

(This article belongs to the Special Issue Flows in Micro- and Nano-Systems)
  • Article
  • Open Access
2 Citations
1,571 Views
10 Pages

13 September 2025

Waveguide-integrated electro-optical modulators play a crucial role in the design of new-generation photonic integrated circuits. The target of this paper is to demonstrate the potential offered by the association of graphene (Gr) and hydrogenated am...

  • Article
  • Open Access
11 Citations
11,210 Views
13 Pages

Die-Level Thinning for Flip-Chip Integration on Flexible Substrates

  • Muhammad Hassan Malik,
  • Andreas Tsiamis,
  • Hubert Zangl,
  • Alfred Binder and ,
  • Srinjoy Mitra and
  • Ali Roshanghias
  • + 1 author+ 0 author

Die-level thinning, handling, and integration of singulated dies from multi-project wafers (MPW) are often used in research, early-stage development, and prototyping of flexible devices. There is a high demand for thin silicon devices for several app...

(This article belongs to the Section Microelectronics)
  • Article
  • Open Access
18 Citations
11,594 Views
12 Pages

Towards Fully Integrated Wireless Impedimetric Sensors

  • Fredy Segura-Quijano,
  • Jordi Sacristán-Riquelme,
  • Jesús García-Cantón,
  • Maria Teresa Osés and
  • Antonio Baldi

21 April 2010

We report on the design and characterization of the building blocks of a single-chip wireless chemical sensor fabricated with a commercial complementary metal-oxide-silicon (CMOS) technology, which includes two types of transducers for impedimetric m...

(This article belongs to the Section Chemical Sensors)
  • Review
  • Open Access
28 Citations
12,608 Views
36 Pages

30 September 2013

Excellent electrical performance and extreme sensitivity to chemical species in semiconducting Single-Walled Carbon NanoTubes (s-SWCNTs) motivated the study of using them to replace silicon as a next generation field effect transistor (FET) for elect...

(This article belongs to the Special Issue Carbon Nanoelectronics)
  • Feature Paper
  • Article
  • Open Access
13 Citations
3,864 Views
23 Pages

21 April 2021

The effect of platform temperature combined with a T5 heat treatment on the fatigue life of additively manufactured aluminum alloy AlSi7Mg was characterized and understood. High-cycle fatigue tests were carried out on samples built with four platform...

(This article belongs to the Special Issue Fatigue Behaviour of Additive Manufactured Metallic Materials)
  • Article
  • Open Access
2 Citations
1,624 Views
16 Pages

30 December 2025

This work reports the design and realization of a silicon-based micro photovoltaic generator (MPG) fabricated using a standard 0.18 μm complementary metal oxide semiconductor (CMOS) technology. The device harvests optical energy and converts it in...

(This article belongs to the Special Issue MEMS/NEMS Devices and Applications, 3rd Edition)
  • Article
  • Open Access
28 Citations
4,565 Views
10 Pages

Simple and Efficient AlN-Based Piezoelectric Energy Harvesters

  • Imrich Gablech,
  • Jaroslav Klempa,
  • Jan Pekárek,
  • Petr Vyroubal and ,
  • Jan Hrabina,
  • Miroslava Holá,
  • Jan Kunz,
  • Jan Brodský and
  • Pavel Neužil
  • + 4 authors+ 0 author

28 January 2020

In this work, we demonstrate the simple fabrication process of AlN-based piezoelectric energy harvesters (PEH), which are made of cantilevers consisting of a multilayer ion beam-assisted deposition. The preferentially (001) orientated AlN thin films...

  • Article
  • Open Access
6 Citations
5,603 Views
16 Pages

Laser Annealing of Si Wafers Based on a Pulsed CO2 Laser

  • Ziming Wang,
  • Guochang Wang,
  • Mingkun Liu,
  • Sicheng Li and ,
  • Zhenzhen Xie,
  • Liemao Hu,
  • Hui Li,
  • Fangjin Ning,
  • Wanli Zhao and
  • Rongqing Tan
  • + 7 authors+ 2 authors

Laser annealing plays a significant role in the fabrication of scaled-down semiconductor devices by activating dopant ions and rearranging silicon atoms in ion-implanted silicon wafers, thereby improving material properties. Precise temperature contr...

(This article belongs to the Section Lasers, Light Sources and Sensors)
  • Article
  • Open Access
17 Citations
10,170 Views
11 Pages

Low-Temperature and Low-Pressure Silicon Nitride Deposition by ECR-PECVD for Optical Waveguides

  • Dawson B. Bonneville,
  • Jeremy W. Miller,
  • Caitlin Smyth,
  • Peter Mascher and
  • Jonathan D. B. Bradley

27 February 2021

We report on low-temperature and low-pressure deposition conditions of 140 °C and 1.5 mTorr, respectively, to achieve high-optical quality silicon nitride thin films. We deposit the silicon nitride films using an electron cyclotron resonance plasma-e...

(This article belongs to the Special Issue Photonic Glass-Ceramics: Fabrication, Properties and Applications)
  • Article
  • Open Access
86 Citations
6,978 Views
14 Pages

Corrosion Behavior of Heat-Treated AlSi10Mg Manufactured by Laser Powder Bed Fusion

  • Marina Cabrini,
  • Flaviana Calignano,
  • Paolo Fino,
  • Sergio Lorenzi and ,
  • Massimo Lorusso,
  • Diego Manfredi,
  • Cristian Testa and
  • Tommaso Pastore
  • + 3 authors+ 0 author

21 June 2018

This experimental work is aimed at studying the effect of microstructural modifications induced by post-processing heat treatments on the corrosion behavior of silicon-aluminum alloys produced by means of laser powder bed fusion (LPBF). The manufactu...

(This article belongs to the Special Issue Laser Materials Processing)
  • Review
  • Open Access
12 Citations
11,117 Views
33 Pages

14 August 2024

The production of many components used in MEMS or NEMS devices, especially those with com-plex shapes, requires machining as the best option among manufacturing techniques. Ultraprecision machining is normally employed to achieve the required shapes,...

(This article belongs to the Special Issue Advances in Low-Dimensional Materials: Synthesis, Characterization and Device Applications)
  • Communication
  • Open Access
1 Citations
1,076 Views
9 Pages

25 March 2025

The microwave heating of silicon carbide is induced at a specific frequency of 2.45 GHz, leading to rapid heating within a temperature range of several hundred degrees Celsius. In this study, a mechanochemical curing process using iodine was employed...

  • Article
  • Open Access
44 Citations
7,020 Views
12 Pages

Low-Concentration Ammonia Gas Sensors Manufactured Using the CMOS–MEMS Technique

  • Wei-Chun Shen,
  • Po-Jen Shih,
  • Yao-Chuan Tsai,
  • Cheng-Chih Hsu and
  • Ching-Liang Dai

15 January 2020

This study describes the fabrication of an ammonia gas sensor (AGS) using a complementary metal oxide semiconductor (CMOS)–microelectromechanical system (MEMS) technique. The structure of the AGS features interdigitated electrodes (IDEs) and a...

(This article belongs to the Special Issue 10th Anniversary of Micromachines)
  • Article
  • Open Access
1 Citations
2,177 Views
17 Pages

6 May 2025

This study compares the microstructures and mechanical properties of the AlSi10Mg alloy processed by laser powder bed fusion (LPBF) after undergoing different post-processing techniques. These techniques include conventional extrusion at 350 °C (...

(This article belongs to the Special Issue Chemistry: Symmetry/Asymmetry—Feature Papers and Reviews)
  • Article
  • Open Access
1 Citations
628 Views
21 Pages

Feasibility Study for Determining the Coating State of ISIComp Material with Thermographic Techniques

  • Giovanni Santonicola,
  • Francesca Di Carolo,
  • Davide Palumbo,
  • Tiziana Matarrese and ,
  • Ester D`Accardi,
  • Mario De Cesare,
  • Mario De Stefano Fumo,
  • Cinzia Toscano and
  • Umberto Galietti
  • + 4 authors+ 0 author

3 April 2026

This work investigates the feasibility of using thermographic techniques to identify the three possible states of a silicon-based coating on a carbon–silicon matrix (ISiComp). Experimental tests were therefore carried out on specimens prepared...

(This article belongs to the Special Issue Emerging Non-Destructive Testing Technologies: Advances and Applications)
  • Article
  • Open Access
34 Citations
14,080 Views
14 Pages

Fabrication and Characterization of a Tunable In-plane Resonator with Low Driving Voltage

  • Pin-Hsu Kao,
  • Ching-Liang Dai,
  • Cheng-Chih Hsu and
  • Chi-Yuan Lee

18 March 2009

This study presents the fabrication and characterization of a micromechanical tunable in-plane resonator. The resonator is manufactured using the commercial 0.35 µm complementary metal oxide semiconductor (CMOS) process. The resonator is made of alum...

(This article belongs to the Special Issue Modeling, Testing and Reliability Issues in MEMS Engineering - 2009)
  • Article
  • Open Access
1 Citations
3,330 Views
12 Pages

DNA information storage holds tremendous potential due to its scalability, long lifespan, and environmental sustainability. The synthesis and reading of complex DNA data structures are of central importance. In this work, we propose new encoding sche...

(This article belongs to the Special Issue Microfluidics for Biomedical Applications (3rd Edition))
  • Article
  • Open Access
1,376 Views
14 Pages

Development of a Three-Dimensional Mucosal Surface Cast of the Caprine Ruminoreticulum

  • Joachim Truelsen,
  • Julia Hollenbach,
  • Elisabeth Engelke,
  • Matthias Lüpke and ,
  • Kerstin von Pückler,
  • Lara Ott,
  • Johanna-Marie Haumann,
  • Sandra Wissing,
  • Kristin Elfers and
  • Christiane Pfarrer
  • + 5 authors+ 0 author

17 April 2026

In veterinary education, many exercises are performed on animals. Palpating the mucosa of the Ruminoreticulum in ruminants is a necessary preparatory exercise for future surgery. However, there are legal and ethical obligations to reduce the use of a...

(This article belongs to the Section Anatomy, Histology and Pathology)
  • Review
  • Open Access
270 Views
39 Pages

Additive Manufacturing of Lightweight Space Mirrors: A Review of Structural Design, Optical Fabrication, and Performance

  • Donghui Yu,
  • Zongxuan Li,
  • Jiuxin Ning,
  • Zhen Wen and ,
  • Shuhui Ren,
  • Qingya Li,
  • Jiangtao Yu and
  • Jiakun Xu
  • + 3 authors+ 0 author

23 October 2026

As space remote sensing technology continuously evolves toward large apertures and high resolutions, optical systems impose increasingly stringent requirements on the mass, specific stiffness, and surface figure stability of mirrors. Leveraging unpar...

(This article belongs to the Section Optical Sensors)
  • Article
  • Open Access
11 Citations
3,201 Views
14 Pages

2 April 2019

Metallic elements can contaminate single crystal silicon mirror during ion beam etching (IBE) and other postprocessing methods, which can affect the performance of components in an infrared laser system. In this work, scanning electron microscope (SE...

(This article belongs to the Section Optical and Photonic Materials)
  • Article
  • Open Access
11 Citations
5,331 Views
14 Pages

The 3D-Printing Fabrication of Multichannel Silicone Microreactors for Catalytic Applications

  • Alejandro Ibáñez-de-Garayo,
  • Mikel Imizcoz,
  • Maitane Maisterra,
  • Fernando Almazán and ,
  • Diego Sanz,
  • Fernando Bimbela,
  • Alfonso Cornejo,
  • Ismael Pellejero and
  • Luis M. Gandía
  • + 4 authors+ 0 author

9 January 2023

Microstructured reactors (MSRs) are especially indicated for highly demanding heterogeneous catalysis due to the small channel dimensions that minimize diffusional limitations and enhance mass and heat transport between the fluid and the catalyst. He...

(This article belongs to the Special Issue Advances in the Manufacturing of Structured Catalysts and Microchannel Reactors)
  • Article
  • Open Access
6 Citations
2,869 Views
25 Pages

Sustainable Thermal Post-Processing of PLA 3D Prints: Increased Dimensional Precision and Autoclave Compatibility

  • Florina Chiscop,
  • Carmen-Cristiana Cazacu,
  • Dragos-Alexandru Cazacu and
  • Costel Emil Cotet

8 September 2025

This study investigates the thermal properties and sterilization efficacy of polylactic acid (PLA) components fabricated via fused deposition modeling (FDM), focusing on PLA’s compatibility with autoclave sterilization protocols. While PLA is e...

(This article belongs to the Section Synthesis of Biomaterials via Advanced Technologies)
  • Communication
  • Open Access
6 Citations
4,851 Views
10 Pages

A Novel Silicon Forward-Biased PIN Mach–Zehnder Modulator with Two Operating States

  • Hang Yu,
  • Donghe Tu,
  • Xingrui Huang,
  • Yuxiang Yin and ,
  • Zhiguo Yu,
  • Huan Guan,
  • Lei Jiang and
  • Zhiyong Li
  • + 3 authors+ 0 author

15 August 2023

In this paper, we demonstrate a silicon forward-biased positive intrinsic negative (PIN) Mach–Zehnder modulator (MZM), which has two operating states of high efficiency and high speed. The two operating states are switched by changing the posit...

(This article belongs to the Special Issue Semiconductors and Nanostructures for Electronics and Photonics)
  • Article
  • Open Access
6 Citations
7,315 Views
22 Pages

15 August 2017

We report on microfabrication and assembly process development on transparent, biocompatible polymers for patterning electrodes and growing electrically active cells for in vitro cell-based biosensor applications. Such biosensors are typically fabric...

(This article belongs to the Special Issue Bio-Inspired Micro/Nano Devices and Systems)
  • Article
  • Open Access
1 Citations
2,623 Views
11 Pages

Supercritical Carbon Dioxide Treatment of Porous Silicon Increases Biocompatibility with Cardiomyocytes

  • David Jui-Yang Feng,
  • Hung-Yin Lin,
  • James L. Thomas,
  • Hsing-Yu Wang and ,
  • Chien-Yu Lin,
  • Chen-Yuan Chen,
  • Kai-Hsi Liu and
  • Mei-Hwa Lee
  • + 3 authors+ 0 author

2 October 2021

Porous silicon is of current interest for cardiac tissue engineering applications. While porous silicon is considered to be a biocompatible material, it is important to assess whether post-etching surface treatments can further improve biocompatibili...

(This article belongs to the Special Issue Cell-Biomaterial Interaction 2021)
  • Article
  • Open Access
634 Views
19 Pages

IM-DETR: DETR with Mix-Encoder for Industrial Scenarios

  • Shiyou Liu,
  • Yong Feng,
  • Dongzi Wang,
  • Zijie Zhou and ,
  • Haibing Wang,
  • Jinsong Wu,
  • Xiangdong Wang,
  • Xuekai Wei,
  • Jielu Yan and
  • Yi Qin
  • + 6 authors+ 1 author

30 March 2026

Industrial defect detection is a fundamental task in intelligent manufacturing, yet existing object detection methods often struggle with the characteristics of industrial defects, such as small size, irregular shapes, and complex visual backgrounds....

(This article belongs to the Special Issue Advanced Computer Vision Technologies and Applications)
  • Article
  • Open Access
28 Citations
6,954 Views
12 Pages

New Aspects of Degradation in Silicone Rubber under UVA and UVB Irradiation: A Gas Chromatography–Mass Spectrometry Study

  • Zheng Wang,
  • Libing Qian,
  • Xiangyang Peng,
  • Zhen Huang and ,
  • Yue Yang,
  • Chunqing He and
  • Pengfei Fang
  • + 2 authors+ 0 author

5 July 2021

In this paper, gas chromatography–mass spectrometry (GC–MS) and positron annihilation lifetime spectroscopy (PALS) were used to probe the changes of oligomers and the polydimethylsiloxane (PDMS) network in silicone rubber, after different durations o...

(This article belongs to the Special Issue Assessment of the Ageing and Durability of Polymers III)

of 4